summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/ata/pata_mpiix.c
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/ata/pata_mpiix.c
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/ata/pata_mpiix.c')
-rw-r--r--kernel/drivers/ata/pata_mpiix.c238
1 files changed, 238 insertions, 0 deletions
diff --git a/kernel/drivers/ata/pata_mpiix.c b/kernel/drivers/ata/pata_mpiix.c
new file mode 100644
index 000000000..202b4d601
--- /dev/null
+++ b/kernel/drivers/ata/pata_mpiix.c
@@ -0,0 +1,238 @@
+/*
+ * pata_mpiix.c - Intel MPIIX PATA for new ATA layer
+ * (C) 2005-2006 Red Hat Inc
+ * Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * The MPIIX is different enough to the PIIX4 and friends that we give it
+ * a separate driver. The old ide/pci code handles this by just not tuning
+ * MPIIX at all.
+ *
+ * The MPIIX also differs in another important way from the majority of PIIX
+ * devices. The chip is a bridge (pardon the pun) between the old world of
+ * ISA IDE and PCI IDE. Although the ATA timings are PCI configured the actual
+ * IDE controller is not decoded in PCI space and the chip does not claim to
+ * be IDE class PCI. This requires slightly non-standard probe logic compared
+ * with PCI IDE and also that we do not disable the device when our driver is
+ * unloaded (as it has many other functions).
+ *
+ * The driver consciously keeps this logic internally to avoid pushing quirky
+ * PATA history into the clean libata layer.
+ *
+ * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
+ * hard disk present this driver will not detect it. This is not a bug. In this
+ * configuration the secondary port of the MPIIX is disabled and the addresses
+ * are decoded by the PCMCIA bridge and therefore are for a generic IDE driver
+ * to operate.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_mpiix"
+#define DRV_VERSION "0.7.7"
+
+enum {
+ IDETIM = 0x6C, /* IDE control register */
+ IORDY = (1 << 1),
+ PPE = (1 << 2),
+ FTIM = (1 << 0),
+ ENABLED = (1 << 15),
+ SECONDARY = (1 << 14)
+};
+
+static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ static const struct pci_bits mpiix_enable_bits = { 0x6D, 1, 0x80, 0x80 };
+
+ if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
+ * mpiix_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup. The MPIIX allows us to program the
+ * IORDY sample point (2-5 clocks), recovery (1-4 clocks) and whether
+ * prefetching or IORDY are used.
+ *
+ * This would get very ugly because we can only program timing for one
+ * device at a time, the other gets PIO0. Fortunately libata calls
+ * our qc_issue command before a command is issued so we can flip the
+ * timings back and forth to reduce the pain.
+ */
+
+static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ int control = 0;
+ int pio = adev->pio_mode - XFER_PIO_0;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 idetim;
+ static const /* ISP RTC */
+ u8 timings[][2] = { { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ pci_read_config_word(pdev, IDETIM, &idetim);
+
+ /* Mask the IORDY/TIME/PPE for this device */
+ if (adev->class == ATA_DEV_ATA)
+ control |= PPE; /* Enable prefetch/posting for disk */
+ if (ata_pio_need_iordy(adev))
+ control |= IORDY;
+ if (pio > 1)
+ control |= FTIM; /* This drive is on the fast timing bank */
+
+ /* Mask out timing and clear both TIME bank selects */
+ idetim &= 0xCCEE;
+ idetim &= ~(0x07 << (4 * adev->devno));
+ idetim |= control << (4 * adev->devno);
+
+ idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
+ pci_write_config_word(pdev, IDETIM, idetim);
+
+ /* We use ap->private_data as a pointer to the device currently
+ loaded for timing */
+ ap->private_data = adev;
+}
+
+/**
+ * mpiix_qc_issue - command issue
+ * @qc: command pending
+ *
+ * Called when the libata layer is about to issue a command. We wrap
+ * this interface so that we can load the correct ATA timings if
+ * necessary. Our logic also clears TIME0/TIME1 for the other device so
+ * that, even if we get this wrong, cycles to the other device will
+ * be made PIO0.
+ */
+
+static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct ata_device *adev = qc->dev;
+
+ /* If modes have been configured and the channel data is not loaded
+ then load it. We have to check if pio_mode is set as the core code
+ does not set adev->pio_mode to XFER_PIO_0 while probing as would be
+ logical */
+
+ if (adev->pio_mode && adev != ap->private_data)
+ mpiix_set_piomode(ap, adev);
+
+ return ata_sff_qc_issue(qc);
+}
+
+static struct scsi_host_template mpiix_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations mpiix_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .qc_issue = mpiix_qc_issue,
+ .cable_detect = ata_cable_40wire,
+ .set_piomode = mpiix_set_piomode,
+ .prereset = mpiix_pre_reset,
+ .sff_data_xfer = ata_sff_data_xfer32,
+};
+
+static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ /* Single threaded by the PCI probe logic */
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *cmd_addr, *ctl_addr;
+ u16 idetim;
+ int cmd, ctl, irq;
+
+ ata_print_version_once(&dev->dev, DRV_VERSION);
+
+ host = ata_host_alloc(&dev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+ ap = host->ports[0];
+
+ /* MPIIX has many functions which can be turned on or off according
+ to other devices present. Make sure IDE is enabled before we try
+ and use it */
+
+ pci_read_config_word(dev, IDETIM, &idetim);
+ if (!(idetim & ENABLED))
+ return -ENODEV;
+
+ /* See if it's primary or secondary channel... */
+ if (!(idetim & SECONDARY)) {
+ cmd = 0x1F0;
+ ctl = 0x3F6;
+ irq = 14;
+ } else {
+ cmd = 0x170;
+ ctl = 0x376;
+ irq = 15;
+ }
+
+ cmd_addr = devm_ioport_map(&dev->dev, cmd, 8);
+ ctl_addr = devm_ioport_map(&dev->dev, ctl, 1);
+ if (!cmd_addr || !ctl_addr)
+ return -ENOMEM;
+
+ ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl);
+
+ /* We do our own plumbing to avoid leaking special cases for whacko
+ ancient hardware into the core code. There are two issues to
+ worry about. #1 The chip is a bridge so if in legacy mode and
+ without BARs set fools the setup. #2 If you pci_disable_device
+ the MPIIX your box goes castors up */
+
+ ap->ops = &mpiix_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_SLAVE_POSS;
+
+ ap->ioaddr.cmd_addr = cmd_addr;
+ ap->ioaddr.ctl_addr = ctl_addr;
+ ap->ioaddr.altstatus_addr = ctl_addr;
+
+ /* Let libata fill in the port details */
+ ata_sff_std_ports(&ap->ioaddr);
+
+ /* activate host */
+ return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED,
+ &mpiix_sht);
+}
+
+static const struct pci_device_id mpiix[] = {
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), },
+
+ { },
+};
+
+static struct pci_driver mpiix_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mpiix,
+ .probe = mpiix_init_one,
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
+};
+
+module_pci_driver(mpiix_pci_driver);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for Intel MPIIX");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, mpiix);
+MODULE_VERSION(DRV_VERSION);