diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/drivers/acpi/acpica/utstring.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/drivers/acpi/acpica/utstring.c')
-rw-r--r-- | kernel/drivers/acpi/acpica/utstring.c | 648 |
1 files changed, 648 insertions, 0 deletions
diff --git a/kernel/drivers/acpi/acpica/utstring.c b/kernel/drivers/acpi/acpica/utstring.c new file mode 100644 index 000000000..83b6c5249 --- /dev/null +++ b/kernel/drivers/acpi/acpica/utstring.c @@ -0,0 +1,648 @@ +/******************************************************************************* + * + * Module Name: utstring - Common functions for strings and characters + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2015, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utstring") + +/* + * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit + * version of strtoul. + */ +#ifdef ACPI_ASL_COMPILER +/******************************************************************************* + * + * FUNCTION: acpi_ut_strlwr (strlwr) + * + * PARAMETERS: src_string - The source string to convert + * + * RETURN: None + * + * DESCRIPTION: Convert string to lowercase + * + * NOTE: This is not a POSIX function, so it appears here, not in utclib.c + * + ******************************************************************************/ +void acpi_ut_strlwr(char *src_string) +{ + char *string; + + ACPI_FUNCTION_ENTRY(); + + if (!src_string) { + return; + } + + /* Walk entire string, lowercasing the letters */ + + for (string = src_string; *string; string++) { + *string = (char)ACPI_TOLOWER(*string); + } + + return; +} + +/****************************************************************************** + * + * FUNCTION: acpi_ut_stricmp (stricmp) + * + * PARAMETERS: string1 - first string to compare + * string2 - second string to compare + * + * RETURN: int that signifies string relationship. Zero means strings + * are equal. + * + * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare + * strings with no case sensitivity) + * + ******************************************************************************/ + +int acpi_ut_stricmp(char *string1, char *string2) +{ + int c1; + int c2; + + do { + c1 = tolower((int)*string1); + c2 = tolower((int)*string2); + + string1++; + string2++; + } + while ((c1 == c2) && (c1)); + + return (c1 - c2); +} +#endif + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strupr (strupr) + * + * PARAMETERS: src_string - The source string to convert + * + * RETURN: None + * + * DESCRIPTION: Convert string to uppercase + * + * NOTE: This is not a POSIX function, so it appears here, not in utclib.c + * + ******************************************************************************/ + +void acpi_ut_strupr(char *src_string) +{ + char *string; + + ACPI_FUNCTION_ENTRY(); + + if (!src_string) { + return; + } + + /* Walk entire string, uppercasing the letters */ + + for (string = src_string; *string; string++) { + *string = (char)ACPI_TOUPPER(*string); + } + + return; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_strtoul64 + * + * PARAMETERS: string - Null terminated string + * base - Radix of the string: 16 or ACPI_ANY_BASE; + * ACPI_ANY_BASE means 'in behalf of to_integer' + * ret_integer - Where the converted integer is returned + * + * RETURN: Status and Converted value + * + * DESCRIPTION: Convert a string into an unsigned value. Performs either a + * 32-bit or 64-bit conversion, depending on the current mode + * of the interpreter. + * NOTE: Does not support Octal strings, not needed. + * + ******************************************************************************/ + +acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer) +{ + u32 this_digit = 0; + u64 return_value = 0; + u64 quotient; + u64 dividend; + u32 to_integer_op = (base == ACPI_ANY_BASE); + u32 mode32 = (acpi_gbl_integer_byte_width == 4); + u8 valid_digits = 0; + u8 sign_of0x = 0; + u8 term = 0; + + ACPI_FUNCTION_TRACE_STR(ut_stroul64, string); + + switch (base) { + case ACPI_ANY_BASE: + case 16: + + break; + + default: + + /* Invalid Base */ + + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + if (!string) { + goto error_exit; + } + + /* Skip over any white space in the buffer */ + + while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) { + string++; + } + + if (to_integer_op) { + /* + * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'. + * We need to determine if it is decimal or hexadecimal. + */ + if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) { + sign_of0x = 1; + base = 16; + + /* Skip over the leading '0x' */ + string += 2; + } else { + base = 10; + } + } + + /* Any string left? Check that '0x' is not followed by white space. */ + + if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') { + if (to_integer_op) { + goto error_exit; + } else { + goto all_done; + } + } + + /* + * Perform a 32-bit or 64-bit conversion, depending upon the current + * execution mode of the interpreter + */ + dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX; + + /* Main loop: convert the string to a 32- or 64-bit integer */ + + while (*string) { + if (ACPI_IS_DIGIT(*string)) { + + /* Convert ASCII 0-9 to Decimal value */ + + this_digit = ((u8)*string) - '0'; + } else if (base == 10) { + + /* Digit is out of range; possible in to_integer case only */ + + term = 1; + } else { + this_digit = (u8)ACPI_TOUPPER(*string); + if (ACPI_IS_XDIGIT((char)this_digit)) { + + /* Convert ASCII Hex char to value */ + + this_digit = this_digit - 'A' + 10; + } else { + term = 1; + } + } + + if (term) { + if (to_integer_op) { + goto error_exit; + } else { + break; + } + } else if ((valid_digits == 0) && (this_digit == 0) + && !sign_of0x) { + + /* Skip zeros */ + string++; + continue; + } + + valid_digits++; + + if (sign_of0x + && ((valid_digits > 16) + || ((valid_digits > 8) && mode32))) { + /* + * This is to_integer operation case. + * No any restrictions for string-to-integer conversion, + * see ACPI spec. + */ + goto error_exit; + } + + /* Divide the digit into the correct position */ + + (void)acpi_ut_short_divide((dividend - (u64)this_digit), + base, "ient, NULL); + + if (return_value > quotient) { + if (to_integer_op) { + goto error_exit; + } else { + break; + } + } + + return_value *= base; + return_value += this_digit; + string++; + } + + /* All done, normal exit */ + +all_done: + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n", + ACPI_FORMAT_UINT64(return_value))); + + *ret_integer = return_value; + return_ACPI_STATUS(AE_OK); + +error_exit: + /* Base was set/validated above */ + + if (base == 10) { + return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT); + } else { + return_ACPI_STATUS(AE_BAD_HEX_CONSTANT); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_print_string + * + * PARAMETERS: string - Null terminated ASCII string + * max_length - Maximum output length. Used to constrain the + * length of strings during debug output only. + * + * RETURN: None + * + * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape + * sequences. + * + ******************************************************************************/ + +void acpi_ut_print_string(char *string, u16 max_length) +{ + u32 i; + + if (!string) { + acpi_os_printf("<\"NULL STRING PTR\">"); + return; + } + + acpi_os_printf("\""); + for (i = 0; (i < max_length) && string[i]; i++) { + + /* Escape sequences */ + + switch (string[i]) { + case 0x07: + + acpi_os_printf("\\a"); /* BELL */ + break; + + case 0x08: + + acpi_os_printf("\\b"); /* BACKSPACE */ + break; + + case 0x0C: + + acpi_os_printf("\\f"); /* FORMFEED */ + break; + + case 0x0A: + + acpi_os_printf("\\n"); /* LINEFEED */ + break; + + case 0x0D: + + acpi_os_printf("\\r"); /* CARRIAGE RETURN */ + break; + + case 0x09: + + acpi_os_printf("\\t"); /* HORIZONTAL TAB */ + break; + + case 0x0B: + + acpi_os_printf("\\v"); /* VERTICAL TAB */ + break; + + case '\'': /* Single Quote */ + case '\"': /* Double Quote */ + case '\\': /* Backslash */ + + acpi_os_printf("\\%c", (int)string[i]); + break; + + default: + + /* Check for printable character or hex escape */ + + if (ACPI_IS_PRINT(string[i])) { + /* This is a normal character */ + + acpi_os_printf("%c", (int)string[i]); + } else { + /* All others will be Hex escapes */ + + acpi_os_printf("\\x%2.2X", (s32) string[i]); + } + break; + } + } + acpi_os_printf("\""); + + if (i == max_length && string[i]) { + acpi_os_printf("..."); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_valid_acpi_char + * + * PARAMETERS: char - The character to be examined + * position - Byte position (0-3) + * + * RETURN: TRUE if the character is valid, FALSE otherwise + * + * DESCRIPTION: Check for a valid ACPI character. Must be one of: + * 1) Upper case alpha + * 2) numeric + * 3) underscore + * + * We allow a '!' as the last character because of the ASF! table + * + ******************************************************************************/ + +u8 acpi_ut_valid_acpi_char(char character, u32 position) +{ + + if (!((character >= 'A' && character <= 'Z') || + (character >= '0' && character <= '9') || (character == '_'))) { + + /* Allow a '!' in the last position */ + + if (character == '!' && position == 3) { + return (TRUE); + } + + return (FALSE); + } + + return (TRUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_valid_acpi_name + * + * PARAMETERS: name - The name to be examined. Does not have to + * be NULL terminated string. + * + * RETURN: TRUE if the name is valid, FALSE otherwise + * + * DESCRIPTION: Check for a valid ACPI name. Each character must be one of: + * 1) Upper case alpha + * 2) numeric + * 3) underscore + * + ******************************************************************************/ + +u8 acpi_ut_valid_acpi_name(char *name) +{ + u32 i; + + ACPI_FUNCTION_ENTRY(); + + for (i = 0; i < ACPI_NAME_SIZE; i++) { + if (!acpi_ut_valid_acpi_char(name[i], i)) { + return (FALSE); + } + } + + return (TRUE); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_repair_name + * + * PARAMETERS: name - The ACPI name to be repaired + * + * RETURN: Repaired version of the name + * + * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and + * return the new name. NOTE: the Name parameter must reside in + * read/write memory, cannot be a const. + * + * An ACPI Name must consist of valid ACPI characters. We will repair the name + * if necessary because we don't want to abort because of this, but we want + * all namespace names to be printable. A warning message is appropriate. + * + * This issue came up because there are in fact machines that exhibit + * this problem, and we want to be able to enable ACPI support for them, + * even though there are a few bad names. + * + ******************************************************************************/ + +void acpi_ut_repair_name(char *name) +{ + u32 i; + u8 found_bad_char = FALSE; + u32 original_name; + + ACPI_FUNCTION_NAME(ut_repair_name); + + ACPI_MOVE_NAME(&original_name, name); + + /* Check each character in the name */ + + for (i = 0; i < ACPI_NAME_SIZE; i++) { + if (acpi_ut_valid_acpi_char(name[i], i)) { + continue; + } + + /* + * Replace a bad character with something printable, yet technically + * still invalid. This prevents any collisions with existing "good" + * names in the namespace. + */ + name[i] = '*'; + found_bad_char = TRUE; + } + + if (found_bad_char) { + + /* Report warning only if in strict mode or debug mode */ + + if (!acpi_gbl_enable_interpreter_slack) { + ACPI_WARNING((AE_INFO, + "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]", + original_name, name)); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]", + original_name, name)); + } + } +} + +#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP +/******************************************************************************* + * + * FUNCTION: ut_convert_backslashes + * + * PARAMETERS: pathname - File pathname string to be converted + * + * RETURN: Modifies the input Pathname + * + * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within + * the entire input file pathname string. + * + ******************************************************************************/ + +void ut_convert_backslashes(char *pathname) +{ + + if (!pathname) { + return; + } + + while (*pathname) { + if (*pathname == '\\') { + *pathname = '/'; + } + + pathname++; + } +} +#endif + +#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION) +/******************************************************************************* + * + * FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat + * + * PARAMETERS: Adds a "DestSize" parameter to each of the standard string + * functions. This is the size of the Destination buffer. + * + * RETURN: TRUE if the operation would overflow the destination buffer. + * + * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that + * the result of the operation will not overflow the output string + * buffer. + * + * NOTE: These functions are typically only helpful for processing + * user input and command lines. For most ACPICA code, the + * required buffer length is precisely calculated before buffer + * allocation, so the use of these functions is unnecessary. + * + ******************************************************************************/ + +u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source) +{ + + if (ACPI_STRLEN(source) >= dest_size) { + return (TRUE); + } + + ACPI_STRCPY(dest, source); + return (FALSE); +} + +u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source) +{ + + if ((ACPI_STRLEN(dest) + ACPI_STRLEN(source)) >= dest_size) { + return (TRUE); + } + + ACPI_STRCAT(dest, source); + return (FALSE); +} + +u8 +acpi_ut_safe_strncat(char *dest, + acpi_size dest_size, + char *source, acpi_size max_transfer_length) +{ + acpi_size actual_transfer_length; + + actual_transfer_length = + ACPI_MIN(max_transfer_length, ACPI_STRLEN(source)); + + if ((ACPI_STRLEN(dest) + actual_transfer_length) >= dest_size) { + return (TRUE); + } + + ACPI_STRNCAT(dest, source, max_transfer_length); + return (FALSE); +} +#endif |