These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 1 insertions, 344 deletions

diff --git a/kernel/drivers/acpi/acpica/utstring.c b/kernel/drivers/acpi/acpica/utstring.c
index 83b6c5249..4ddd105d9 100644
--- a/kernel/drivers/acpi/acpica/utstring.c
+++ b/kernel/drivers/acpi/acpica/utstring.c
@@ -48,286 +48,6 @@
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utstring")
 
-/*
- * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
- * version of strtoul.
- */
-#ifdef ACPI_ASL_COMPILER
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_strlwr (strlwr)
- *
- * PARAMETERS:  src_string      - The source string to convert
- *
- * RETURN:      None
- *
- * DESCRIPTION: Convert string to lowercase
- *
- * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
- *
- ******************************************************************************/
-void acpi_ut_strlwr(char *src_string)
-{
-	char *string;
-
-	ACPI_FUNCTION_ENTRY();
-
-	if (!src_string) {
-		return;
-	}
-
-	/* Walk entire string, lowercasing the letters */
-
-	for (string = src_string; *string; string++) {
-		*string = (char)ACPI_TOLOWER(*string);
-	}
-
-	return;
-}
-
-/******************************************************************************
- *
- * FUNCTION:    acpi_ut_stricmp (stricmp)
- *
- * PARAMETERS:  string1             - first string to compare
- *              string2             - second string to compare
- *
- * RETURN:      int that signifies string relationship. Zero means strings
- *              are equal.
- *
- * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
- *              strings with no case sensitivity)
- *
- ******************************************************************************/
-
-int acpi_ut_stricmp(char *string1, char *string2)
-{
-	int c1;
-	int c2;
-
-	do {
-		c1 = tolower((int)*string1);
-		c2 = tolower((int)*string2);
-
-		string1++;
-		string2++;
-	}
-	while ((c1 == c2) && (c1));
-
-	return (c1 - c2);
-}
-#endif
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_strupr (strupr)
- *
- * PARAMETERS:  src_string      - The source string to convert
- *
- * RETURN:      None
- *
- * DESCRIPTION: Convert string to uppercase
- *
- * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
- *
- ******************************************************************************/
-
-void acpi_ut_strupr(char *src_string)
-{
-	char *string;
-
-	ACPI_FUNCTION_ENTRY();
-
-	if (!src_string) {
-		return;
-	}
-
-	/* Walk entire string, uppercasing the letters */
-
-	for (string = src_string; *string; string++) {
-		*string = (char)ACPI_TOUPPER(*string);
-	}
-
-	return;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_strtoul64
- *
- * PARAMETERS:  string          - Null terminated string
- *              base            - Radix of the string: 16 or ACPI_ANY_BASE;
- *                                ACPI_ANY_BASE means 'in behalf of to_integer'
- *              ret_integer     - Where the converted integer is returned
- *
- * RETURN:      Status and Converted value
- *
- * DESCRIPTION: Convert a string into an unsigned value. Performs either a
- *              32-bit or 64-bit conversion, depending on the current mode
- *              of the interpreter.
- *              NOTE: Does not support Octal strings, not needed.
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
-{
-	u32 this_digit = 0;
-	u64 return_value = 0;
-	u64 quotient;
-	u64 dividend;
-	u32 to_integer_op = (base == ACPI_ANY_BASE);
-	u32 mode32 = (acpi_gbl_integer_byte_width == 4);
-	u8 valid_digits = 0;
-	u8 sign_of0x = 0;
-	u8 term = 0;
-
-	ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
-
-	switch (base) {
-	case ACPI_ANY_BASE:
-	case 16:
-
-		break;
-
-	default:
-
-		/* Invalid Base */
-
-		return_ACPI_STATUS(AE_BAD_PARAMETER);
-	}
-
-	if (!string) {
-		goto error_exit;
-	}
-
-	/* Skip over any white space in the buffer */
-
-	while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
-		string++;
-	}
-
-	if (to_integer_op) {
-		/*
-		 * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
-		 * We need to determine if it is decimal or hexadecimal.
-		 */
-		if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
-			sign_of0x = 1;
-			base = 16;
-
-			/* Skip over the leading '0x' */
-			string += 2;
-		} else {
-			base = 10;
-		}
-	}
-
-	/* Any string left? Check that '0x' is not followed by white space. */
-
-	if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
-		if (to_integer_op) {
-			goto error_exit;
-		} else {
-			goto all_done;
-		}
-	}
-
-	/*
-	 * Perform a 32-bit or 64-bit conversion, depending upon the current
-	 * execution mode of the interpreter
-	 */
-	dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
-
-	/* Main loop: convert the string to a 32- or 64-bit integer */
-
-	while (*string) {
-		if (ACPI_IS_DIGIT(*string)) {
-
-			/* Convert ASCII 0-9 to Decimal value */
-
-			this_digit = ((u8)*string) - '0';
-		} else if (base == 10) {
-
-			/* Digit is out of range; possible in to_integer case only */
-
-			term = 1;
-		} else {
-			this_digit = (u8)ACPI_TOUPPER(*string);
-			if (ACPI_IS_XDIGIT((char)this_digit)) {
-
-				/* Convert ASCII Hex char to value */
-
-				this_digit = this_digit - 'A' + 10;
-			} else {
-				term = 1;
-			}
-		}
-
-		if (term) {
-			if (to_integer_op) {
-				goto error_exit;
-			} else {
-				break;
-			}
-		} else if ((valid_digits == 0) && (this_digit == 0)
-			   && !sign_of0x) {
-
-			/* Skip zeros */
-			string++;
-			continue;
-		}
-
-		valid_digits++;
-
-		if (sign_of0x
-		    && ((valid_digits > 16)
-			|| ((valid_digits > 8) && mode32))) {
-			/*
-			 * This is to_integer operation case.
-			 * No any restrictions for string-to-integer conversion,
-			 * see ACPI spec.
-			 */
-			goto error_exit;
-		}
-
-		/* Divide the digit into the correct position */
-
-		(void)acpi_ut_short_divide((dividend - (u64)this_digit),
-					   base, &quotient, NULL);
-
-		if (return_value > quotient) {
-			if (to_integer_op) {
-				goto error_exit;
-			} else {
-				break;
-			}
-		}
-
-		return_value *= base;
-		return_value += this_digit;
-		string++;
-	}
-
-	/* All done, normal exit */
-
-all_done:
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
-			  ACPI_FORMAT_UINT64(return_value)));
-
-	*ret_integer = return_value;
-	return_ACPI_STATUS(AE_OK);
-
-error_exit:
-	/* Base was set/validated above */
-
-	if (base == 10) {
-		return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
-	} else {
-		return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
-	}
-}
-
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_print_string
@@ -342,7 +62,6 @@ error_exit:
  *              sequences.
  *
  ******************************************************************************/
-
 void acpi_ut_print_string(char *string, u16 max_length)
 {
 	u32 i;
@@ -404,7 +123,7 @@ void acpi_ut_print_string(char *string, u16 max_length)
 
 			/* Check for printable character or hex escape */
 
-			if (ACPI_IS_PRINT(string[i])) {
+			if (isprint((int)string[i])) {
 				/* This is a normal character */
 
 				acpi_os_printf("%c", (int)string[i]);
@@ -584,65 +303,3 @@ void ut_convert_backslashes(char *pathname)
 	}
 }
 #endif
-
-#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat
- *
- * PARAMETERS:  Adds a "DestSize" parameter to each of the standard string
- *              functions. This is the size of the Destination buffer.
- *
- * RETURN:      TRUE if the operation would overflow the destination buffer.
- *
- * DESCRIPTION: Safe versions of standard Clib string functions. Ensure that
- *              the result of the operation will not overflow the output string
- *              buffer.
- *
- * NOTE:        These functions are typically only helpful for processing
- *              user input and command lines. For most ACPICA code, the
- *              required buffer length is precisely calculated before buffer
- *              allocation, so the use of these functions is unnecessary.
- *
- ******************************************************************************/
-
-u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source)
-{
-
-	if (ACPI_STRLEN(source) >= dest_size) {
-		return (TRUE);
-	}
-
-	ACPI_STRCPY(dest, source);
-	return (FALSE);
-}
-
-u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source)
-{
-
-	if ((ACPI_STRLEN(dest) + ACPI_STRLEN(source)) >= dest_size) {
-		return (TRUE);
-	}
-
-	ACPI_STRCAT(dest, source);
-	return (FALSE);
-}
-
-u8
-acpi_ut_safe_strncat(char *dest,
-		     acpi_size dest_size,
-		     char *source, acpi_size max_transfer_length)
-{
-	acpi_size actual_transfer_length;
-
-	actual_transfer_length =
-	    ACPI_MIN(max_transfer_length, ACPI_STRLEN(source));
-
-	if ((ACPI_STRLEN(dest) + actual_transfer_length) >= dest_size) {
-		return (TRUE);
-	}
-
-	ACPI_STRNCAT(dest, source, max_transfer_length);
-	return (FALSE);
-}
-#endif