Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 587 insertions, 0 deletions

diff --git a/kernel/drivers/acpi/acpica/hwxface.c b/kernel/drivers/acpi/acpica/hwxface.c
new file mode 100644
index 000000000..8c017f15d
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/hwxface.c
@@ -0,0 +1,587 @@
+/******************************************************************************
+ *
+ * Module Name: hwxface - Public ACPICA hardware interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#define EXPORT_ACPI_INTERFACES
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_HARDWARE
+ACPI_MODULE_NAME("hwxface")
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_reset
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Set reset register in memory or IO space. Note: Does not
+ *              support reset register in PCI config space, this must be
+ *              handled separately.
+ *
+ ******************************************************************************/
+acpi_status acpi_reset(void)
+{
+	struct acpi_generic_address *reset_reg;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(acpi_reset);
+
+	reset_reg = &acpi_gbl_FADT.reset_register;
+
+	/* Check if the reset register is supported */
+
+	if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) ||
+	    !reset_reg->address) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	if (reset_reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+		/*
+		 * For I/O space, write directly to the OSL. This bypasses the port
+		 * validation mechanism, which may block a valid write to the reset
+		 * register.
+		 *
+		 * NOTE:
+		 * The ACPI spec requires the reset register width to be 8, so we
+		 * hardcode it here and ignore the FADT value. This maintains
+		 * compatibility with other ACPI implementations that have allowed
+		 * BIOS code with bad register width values to go unnoticed.
+		 */
+		status =
+		    acpi_os_write_port((acpi_io_address) reset_reg->address,
+				       acpi_gbl_FADT.reset_value,
+				       ACPI_RESET_REGISTER_WIDTH);
+	} else {
+		/* Write the reset value to the reset register */
+
+		status = acpi_hw_write(acpi_gbl_FADT.reset_value, reset_reg);
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_reset)
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_read
+ *
+ * PARAMETERS:  value               - Where the value is returned
+ *              reg                 - GAS register structure
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read from either memory or IO space.
+ *
+ * LIMITATIONS: <These limitations also apply to acpi_write>
+ *      bit_width must be exactly 8, 16, 32, or 64.
+ *      space_ID must be system_memory or system_IO.
+ *      bit_offset and access_width are currently ignored, as there has
+ *          not been a need to implement these.
+ *
+ ******************************************************************************/
+acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
+{
+	u32 value_lo;
+	u32 value_hi;
+	u32 width;
+	u64 address;
+	acpi_status status;
+
+	ACPI_FUNCTION_NAME(acpi_read);
+
+	if (!return_value) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* Validate contents of the GAS register. Allow 64-bit transfers */
+
+	status = acpi_hw_validate_register(reg, 64, &address);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/*
+	 * Two address spaces supported: Memory or I/O. PCI_Config is
+	 * not supported here because the GAS structure is insufficient
+	 */
+	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+		status = acpi_os_read_memory((acpi_physical_address)
+					     address, return_value,
+					     reg->bit_width);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+	} else {		/* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+
+		value_lo = 0;
+		value_hi = 0;
+
+		width = reg->bit_width;
+		if (width == 64) {
+			width = 32;	/* Break into two 32-bit transfers */
+		}
+
+		status = acpi_hw_read_port((acpi_io_address)
+					   address, &value_lo, width);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+
+		if (reg->bit_width == 64) {
+
+			/* Read the top 32 bits */
+
+			status = acpi_hw_read_port((acpi_io_address)
+						   (address + 4), &value_hi,
+						   32);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+		}
+
+		/* Set the return value only if status is AE_OK */
+
+		*return_value = (value_lo | ((u64)value_hi << 32));
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_IO,
+			  "Read:  %8.8X%8.8X width %2d from %8.8X%8.8X (%s)\n",
+			  ACPI_FORMAT_UINT64(*return_value), reg->bit_width,
+			  ACPI_FORMAT_UINT64(address),
+			  acpi_ut_get_region_name(reg->space_id)));
+
+	return (AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_read)
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_write
+ *
+ * PARAMETERS:  value               - Value to be written
+ *              reg                 - GAS register structure
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Write to either memory or IO space.
+ *
+ ******************************************************************************/
+acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
+{
+	u32 width;
+	u64 address;
+	acpi_status status;
+
+	ACPI_FUNCTION_NAME(acpi_write);
+
+	/* Validate contents of the GAS register. Allow 64-bit transfers */
+
+	status = acpi_hw_validate_register(reg, 64, &address);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/*
+	 * Two address spaces supported: Memory or IO. PCI_Config is
+	 * not supported here because the GAS structure is insufficient
+	 */
+	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+		status = acpi_os_write_memory((acpi_physical_address)
+					      address, value, reg->bit_width);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+	} else {		/* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
+
+		width = reg->bit_width;
+		if (width == 64) {
+			width = 32;	/* Break into two 32-bit transfers */
+		}
+
+		status = acpi_hw_write_port((acpi_io_address)
+					    address, ACPI_LODWORD(value),
+					    width);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+
+		if (reg->bit_width == 64) {
+			status = acpi_hw_write_port((acpi_io_address)
+						    (address + 4),
+						    ACPI_HIDWORD(value), 32);
+			if (ACPI_FAILURE(status)) {
+				return (status);
+			}
+		}
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_IO,
+			  "Wrote: %8.8X%8.8X width %2d   to %8.8X%8.8X (%s)\n",
+			  ACPI_FORMAT_UINT64(value), reg->bit_width,
+			  ACPI_FORMAT_UINT64(address),
+			  acpi_ut_get_region_name(reg->space_id)));
+
+	return (status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_write)
+
+#if (!ACPI_REDUCED_HARDWARE)
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_read_bit_register
+ *
+ * PARAMETERS:  register_id     - ID of ACPI Bit Register to access
+ *              return_value    - Value that was read from the register,
+ *                                normalized to bit position zero.
+ *
+ * RETURN:      Status and the value read from the specified Register. Value
+ *              returned is normalized to bit0 (is shifted all the way right)
+ *
+ * DESCRIPTION: ACPI bit_register read function. Does not acquire the HW lock.
+ *
+ * SUPPORTS:    Bit fields in PM1 Status, PM1 Enable, PM1 Control, and
+ *              PM2 Control.
+ *
+ * Note: The hardware lock is not required when reading the ACPI bit registers
+ *       since almost all of them are single bit and it does not matter that
+ *       the parent hardware register can be split across two physical
+ *       registers. The only multi-bit field is SLP_TYP in the PM1 control
+ *       register, but this field does not cross an 8-bit boundary (nor does
+ *       it make much sense to actually read this field.)
+ *
+ ******************************************************************************/
+acpi_status acpi_read_bit_register(u32 register_id, u32 *return_value)
+{
+	struct acpi_bit_register_info *bit_reg_info;
+	u32 register_value;
+	u32 value;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_U32(acpi_read_bit_register, register_id);
+
+	/* Get the info structure corresponding to the requested ACPI Register */
+
+	bit_reg_info = acpi_hw_get_bit_register_info(register_id);
+	if (!bit_reg_info) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	/* Read the entire parent register */
+
+	status = acpi_hw_register_read(bit_reg_info->parent_register,
+				       &register_value);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Normalize the value that was read, mask off other bits */
+
+	value = ((register_value & bit_reg_info->access_bit_mask)
+		 >> bit_reg_info->bit_position);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_IO,
+			  "BitReg %X, ParentReg %X, Actual %8.8X, ReturnValue %8.8X\n",
+			  register_id, bit_reg_info->parent_register,
+			  register_value, value));
+
+	*return_value = value;
+	return_ACPI_STATUS(AE_OK);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_write_bit_register
+ *
+ * PARAMETERS:  register_id     - ID of ACPI Bit Register to access
+ *              value           - Value to write to the register, in bit
+ *                                position zero. The bit is automatically
+ *                                shifted to the correct position.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: ACPI Bit Register write function. Acquires the hardware lock
+ *              since most operations require a read/modify/write sequence.
+ *
+ * SUPPORTS:    Bit fields in PM1 Status, PM1 Enable, PM1 Control, and
+ *              PM2 Control.
+ *
+ * Note that at this level, the fact that there may be actually two
+ * hardware registers (A and B - and B may not exist) is abstracted.
+ *
+ ******************************************************************************/
+acpi_status acpi_write_bit_register(u32 register_id, u32 value)
+{
+	struct acpi_bit_register_info *bit_reg_info;
+	acpi_cpu_flags lock_flags;
+	u32 register_value;
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE_U32(acpi_write_bit_register, register_id);
+
+	/* Get the info structure corresponding to the requested ACPI Register */
+
+	bit_reg_info = acpi_hw_get_bit_register_info(register_id);
+	if (!bit_reg_info) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	raw_spin_lock_irqsave(acpi_gbl_hardware_lock, lock_flags);
+
+	/*
+	 * At this point, we know that the parent register is one of the
+	 * following: PM1 Status, PM1 Enable, PM1 Control, or PM2 Control
+	 */
+	if (bit_reg_info->parent_register != ACPI_REGISTER_PM1_STATUS) {
+		/*
+		 * 1) Case for PM1 Enable, PM1 Control, and PM2 Control
+		 *
+		 * Perform a register read to preserve the bits that we are not
+		 * interested in
+		 */
+		status = acpi_hw_register_read(bit_reg_info->parent_register,
+					       &register_value);
+		if (ACPI_FAILURE(status)) {
+			goto unlock_and_exit;
+		}
+
+		/*
+		 * Insert the input bit into the value that was just read
+		 * and write the register
+		 */
+		ACPI_REGISTER_INSERT_VALUE(register_value,
+					   bit_reg_info->bit_position,
+					   bit_reg_info->access_bit_mask,
+					   value);
+
+		status = acpi_hw_register_write(bit_reg_info->parent_register,
+						register_value);
+	} else {
+		/*
+		 * 2) Case for PM1 Status
+		 *
+		 * The Status register is different from the rest. Clear an event
+		 * by writing 1, writing 0 has no effect. So, the only relevant
+		 * information is the single bit we're interested in, all others
+		 * should be written as 0 so they will be left unchanged.
+		 */
+		register_value = ACPI_REGISTER_PREPARE_BITS(value,
+							    bit_reg_info->
+							    bit_position,
+							    bit_reg_info->
+							    access_bit_mask);
+
+		/* No need to write the register if value is all zeros */
+
+		if (register_value) {
+			status =
+			    acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
+						   register_value);
+		}
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_IO,
+			  "BitReg %X, ParentReg %X, Value %8.8X, Actual %8.8X\n",
+			  register_id, bit_reg_info->parent_register, value,
+			  register_value));
+
+unlock_and_exit:
+
+	raw_spin_unlock_irqrestore(acpi_gbl_hardware_lock, lock_flags);
+	return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
+#endif				/* !ACPI_REDUCED_HARDWARE */
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_get_sleep_type_data
+ *
+ * PARAMETERS:  sleep_state         - Numeric sleep state
+ *              *sleep_type_a        - Where SLP_TYPa is returned
+ *              *sleep_type_b        - Where SLP_TYPb is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested
+ *              sleep state via the appropriate \_Sx object.
+ *
+ *  The sleep state package returned from the corresponding \_Sx_ object
+ *  must contain at least one integer.
+ *
+ *  March 2005:
+ *  Added support for a package that contains two integers. This
+ *  goes against the ACPI specification which defines this object as a
+ *  package with one encoded DWORD integer. However, existing practice
+ *  by many BIOS vendors is to return a package with 2 or more integer
+ *  elements, at least one per sleep type (A/B).
+ *
+ *  January 2013:
+ *  Therefore, we must be prepared to accept a package with either a
+ *  single integer or multiple integers.
+ *
+ *  The single integer DWORD format is as follows:
+ *      BYTE 0 - Value for the PM1A SLP_TYP register
+ *      BYTE 1 - Value for the PM1B SLP_TYP register
+ *      BYTE 2-3 - Reserved
+ *
+ *  The dual integer format is as follows:
+ *      Integer 0 - Value for the PM1A SLP_TYP register
+ *      Integer 1 - Value for the PM1A SLP_TYP register
+ *
+ ******************************************************************************/
+acpi_status
+acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
+{
+	acpi_status status;
+	struct acpi_evaluate_info *info;
+	union acpi_operand_object **elements;
+
+	ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
+
+	/* Validate parameters */
+
+	if ((sleep_state > ACPI_S_STATES_MAX) || !sleep_type_a || !sleep_type_b) {
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	/* Allocate the evaluation information block */
+
+	info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
+	if (!info) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	/*
+	 * Evaluate the \_Sx namespace object containing the register values
+	 * for this state
+	 */
+	info->relative_pathname =
+	    ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
+	status = acpi_ns_evaluate(info);
+	if (ACPI_FAILURE(status)) {
+		goto cleanup;
+	}
+
+	/* Must have a return object */
+
+	if (!info->return_object) {
+		ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
+			    info->relative_pathname));
+		status = AE_AML_NO_RETURN_VALUE;
+		goto cleanup;
+	}
+
+	/* Return object must be of type Package */
+
+	if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
+		ACPI_ERROR((AE_INFO,
+			    "Sleep State return object is not a Package"));
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup1;
+	}
+
+	/*
+	 * Any warnings about the package length or the object types have
+	 * already been issued by the predefined name module -- there is no
+	 * need to repeat them here.
+	 */
+	elements = info->return_object->package.elements;
+	switch (info->return_object->package.count) {
+	case 0:
+
+		status = AE_AML_PACKAGE_LIMIT;
+		break;
+
+	case 1:
+
+		if (elements[0]->common.type != ACPI_TYPE_INTEGER) {
+			status = AE_AML_OPERAND_TYPE;
+			break;
+		}
+
+		/* A valid _Sx_ package with one integer */
+
+		*sleep_type_a = (u8)elements[0]->integer.value;
+		*sleep_type_b = (u8)(elements[0]->integer.value >> 8);
+		break;
+
+	case 2:
+	default:
+
+		if ((elements[0]->common.type != ACPI_TYPE_INTEGER) ||
+		    (elements[1]->common.type != ACPI_TYPE_INTEGER)) {
+			status = AE_AML_OPERAND_TYPE;
+			break;
+		}
+
+		/* A valid _Sx_ package with two integers */
+
+		*sleep_type_a = (u8)elements[0]->integer.value;
+		*sleep_type_b = (u8)elements[1]->integer.value;
+		break;
+	}
+
+cleanup1:
+	acpi_ut_remove_reference(info->return_object);
+
+cleanup:
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status,
+				"While evaluating Sleep State [%s]",
+				info->relative_pathname));
+	}
+
+	ACPI_FREE(info);
+	return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_get_sleep_type_data)