Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 281 insertions, 0 deletions

diff --git a/kernel/drivers/acpi/acpica/exoparg3.c b/kernel/drivers/acpi/acpica/exoparg3.c
new file mode 100644
index 000000000..1c64a988c
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/exoparg3.c
@@ -0,0 +1,281 @@
+/******************************************************************************
+ *
+ * Module Name: exoparg3 - AML execution - opcodes with 3 arguments
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acinterp.h"
+#include "acparser.h"
+#include "amlcode.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exoparg3")
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (1 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_3A_0T_0R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute Triadic operator (3 operands)
+ *
+ ******************************************************************************/
+acpi_status acpi_ex_opcode_3A_0T_0R(struct acpi_walk_state *walk_state)
+{
+	union acpi_operand_object **operand = &walk_state->operands[0];
+	struct acpi_signal_fatal_info *fatal;
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_3A_0T_0R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	switch (walk_state->opcode) {
+	case AML_FATAL_OP:	/* Fatal (fatal_type fatal_code fatal_arg) */
+
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "FatalOp: Type %X Code %X Arg %X <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n",
+				  (u32) operand[0]->integer.value,
+				  (u32) operand[1]->integer.value,
+				  (u32) operand[2]->integer.value));
+
+		fatal = ACPI_ALLOCATE(sizeof(struct acpi_signal_fatal_info));
+		if (fatal) {
+			fatal->type = (u32) operand[0]->integer.value;
+			fatal->code = (u32) operand[1]->integer.value;
+			fatal->argument = (u32) operand[2]->integer.value;
+		}
+
+		/* Always signal the OS! */
+
+		status = acpi_os_signal(ACPI_SIGNAL_FATAL, fatal);
+
+		/* Might return while OS is shutting down, just continue */
+
+		ACPI_FREE(fatal);
+		goto cleanup;
+
+	case AML_EXTERNAL_OP:
+		/*
+		 * If the interpreter sees this opcode, just ignore it. The External
+		 * op is intended for use by disassemblers in order to properly
+		 * disassemble control method invocations. The opcode or group of
+		 * opcodes should be surrounded by an "if (0)" clause to ensure that
+		 * AML interpreters never see the opcode.
+		 */
+		status = AE_OK;
+		goto cleanup;
+
+	default:
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+cleanup:
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_3A_1T_1R
+ *
+ * PARAMETERS:  walk_state          - Current walk state
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute Triadic operator (3 operands)
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
+{
+	union acpi_operand_object **operand = &walk_state->operands[0];
+	union acpi_operand_object *return_desc = NULL;
+	char *buffer = NULL;
+	acpi_status status = AE_OK;
+	u64 index;
+	acpi_size length;
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_3A_1T_1R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	switch (walk_state->opcode) {
+	case AML_MID_OP:	/* Mid (Source[0], Index[1], Length[2], Result[3]) */
+		/*
+		 * Create the return object. The Source operand is guaranteed to be
+		 * either a String or a Buffer, so just use its type.
+		 */
+		return_desc = acpi_ut_create_internal_object((operand[0])->
+							     common.type);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/* Get the Integer values from the objects */
+
+		index = operand[1]->integer.value;
+		length = (acpi_size) operand[2]->integer.value;
+
+		/*
+		 * If the index is beyond the length of the String/Buffer, or if the
+		 * requested length is zero, return a zero-length String/Buffer
+		 */
+		if (index >= operand[0]->string.length) {
+			length = 0;
+		}
+
+		/* Truncate request if larger than the actual String/Buffer */
+
+		else if ((index + length) > operand[0]->string.length) {
+			length = (acpi_size) operand[0]->string.length -
+			    (acpi_size) index;
+		}
+
+		/* Strings always have a sub-pointer, not so for buffers */
+
+		switch ((operand[0])->common.type) {
+		case ACPI_TYPE_STRING:
+
+			/* Always allocate a new buffer for the String */
+
+			buffer = ACPI_ALLOCATE_ZEROED((acpi_size) length + 1);
+			if (!buffer) {
+				status = AE_NO_MEMORY;
+				goto cleanup;
+			}
+			break;
+
+		case ACPI_TYPE_BUFFER:
+
+			/* If the requested length is zero, don't allocate a buffer */
+
+			if (length > 0) {
+
+				/* Allocate a new buffer for the Buffer */
+
+				buffer = ACPI_ALLOCATE_ZEROED(length);
+				if (!buffer) {
+					status = AE_NO_MEMORY;
+					goto cleanup;
+				}
+			}
+			break;
+
+		default:	/* Should not happen */
+
+			status = AE_AML_OPERAND_TYPE;
+			goto cleanup;
+		}
+
+		if (buffer) {
+
+			/* We have a buffer, copy the portion requested */
+
+			ACPI_MEMCPY(buffer, operand[0]->string.pointer + index,
+				    length);
+		}
+
+		/* Set the length of the new String/Buffer */
+
+		return_desc->string.pointer = buffer;
+		return_desc->string.length = (u32) length;
+
+		/* Mark buffer initialized */
+
+		return_desc->buffer.flags |= AOPOBJ_DATA_VALID;
+		break;
+
+	default:
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+	/* Store the result in the target */
+
+	status = acpi_ex_store(return_desc, operand[3], walk_state);
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE(status) || walk_state->result_obj) {
+		acpi_ut_remove_reference(return_desc);
+		walk_state->result_obj = NULL;
+	}
+
+	/* Set the return object and exit */
+
+	else {
+		walk_state->result_obj = return_desc;
+	}
+	return_ACPI_STATUS(status);
+}