Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 1072 insertions, 0 deletions

diff --git a/kernel/drivers/acpi/acpica/exoparg1.c b/kernel/drivers/acpi/acpica/exoparg1.c
new file mode 100644
index 000000000..77930683a
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/exoparg1.c
@@ -0,0 +1,1072 @@
+/******************************************************************************
+ *
+ * Module Name: exoparg1 - AML execution - opcodes with 1 argument
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "amlcode.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exoparg1")
+
+/*!
+ * Naming convention for AML interpreter execution routines.
+ *
+ * The routines that begin execution of AML opcodes are named with a common
+ * convention based upon the number of arguments, the number of target operands,
+ * and whether or not a value is returned:
+ *
+ *      AcpiExOpcode_xA_yT_zR
+ *
+ * Where:
+ *
+ * xA - ARGUMENTS:    The number of arguments (input operands) that are
+ *                    required for this opcode type (0 through 6 args).
+ * yT - TARGETS:      The number of targets (output operands) that are required
+ *                    for this opcode type (0, 1, or 2 targets).
+ * zR - RETURN VALUE: Indicates whether this opcode type returns a value
+ *                    as the function return (0 or 1).
+ *
+ * The AcpiExOpcode* functions are called via the Dispatcher component with
+ * fully resolved operands.
+!*/
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_0A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute operator with no operands, one return value
+ *
+ ******************************************************************************/
+acpi_status acpi_ex_opcode_0A_0T_1R(struct acpi_walk_state *walk_state)
+{
+	acpi_status status = AE_OK;
+	union acpi_operand_object *return_desc = NULL;
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_0A_0T_1R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_TIMER_OP:	/*  Timer () */
+
+		/* Create a return object of type Integer */
+
+		return_desc =
+		    acpi_ut_create_integer_object(acpi_os_get_timer());
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+		break;
+
+	default:		/*  Unknown opcode  */
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if ((ACPI_FAILURE(status)) || walk_state->result_obj) {
+		acpi_ut_remove_reference(return_desc);
+		walk_state->result_obj = NULL;
+	} else {
+		/* Save the return value */
+
+		walk_state->result_obj = return_desc;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_0T_0R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute Type 1 monadic operator with numeric operand on
+ *              object stack
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_opcode_1A_0T_0R(struct acpi_walk_state *walk_state)
+{
+	union acpi_operand_object **operand = &walk_state->operands[0];
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_1A_0T_0R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_RELEASE_OP:	/*  Release (mutex_object) */
+
+		status = acpi_ex_release_mutex(operand[0], walk_state);
+		break;
+
+	case AML_RESET_OP:	/*  Reset (event_object) */
+
+		status = acpi_ex_system_reset_event(operand[0]);
+		break;
+
+	case AML_SIGNAL_OP:	/*  Signal (event_object) */
+
+		status = acpi_ex_system_signal_event(operand[0]);
+		break;
+
+	case AML_SLEEP_OP:	/*  Sleep (msec_time) */
+
+		status = acpi_ex_system_do_sleep(operand[0]->integer.value);
+		break;
+
+	case AML_STALL_OP:	/*  Stall (usec_time) */
+
+		status =
+		    acpi_ex_system_do_stall((u32) operand[0]->integer.value);
+		break;
+
+	case AML_UNLOAD_OP:	/*  Unload (Handle) */
+
+		status = acpi_ex_unload_table(operand[0]);
+		break;
+
+	default:		/*  Unknown opcode  */
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		break;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_1T_0R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with one argument, one target, and no
+ *              return value.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_opcode_1A_1T_0R(struct acpi_walk_state *walk_state)
+{
+	acpi_status status = AE_OK;
+	union acpi_operand_object **operand = &walk_state->operands[0];
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_1A_1T_0R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_LOAD_OP:
+
+		status = acpi_ex_load_op(operand[0], operand[1], walk_state);
+		break;
+
+	default:		/* Unknown opcode */
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+cleanup:
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_1T_1R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with one argument, one target, and a
+ *              return value.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_opcode_1A_1T_1R(struct acpi_walk_state *walk_state)
+{
+	acpi_status status = AE_OK;
+	union acpi_operand_object **operand = &walk_state->operands[0];
+	union acpi_operand_object *return_desc = NULL;
+	union acpi_operand_object *return_desc2 = NULL;
+	u32 temp32;
+	u32 i;
+	u64 power_of_ten;
+	u64 digit;
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_1A_1T_1R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_BIT_NOT_OP:
+	case AML_FIND_SET_LEFT_BIT_OP:
+	case AML_FIND_SET_RIGHT_BIT_OP:
+	case AML_FROM_BCD_OP:
+	case AML_TO_BCD_OP:
+	case AML_COND_REF_OF_OP:
+
+		/* Create a return object of type Integer for these opcodes */
+
+		return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		switch (walk_state->opcode) {
+		case AML_BIT_NOT_OP:	/* Not (Operand, Result)  */
+
+			return_desc->integer.value = ~operand[0]->integer.value;
+			break;
+
+		case AML_FIND_SET_LEFT_BIT_OP:	/* find_set_left_bit (Operand, Result) */
+
+			return_desc->integer.value = operand[0]->integer.value;
+
+			/*
+			 * Acpi specification describes Integer type as a little
+			 * endian unsigned value, so this boundary condition is valid.
+			 */
+			for (temp32 = 0; return_desc->integer.value &&
+			     temp32 < ACPI_INTEGER_BIT_SIZE; ++temp32) {
+				return_desc->integer.value >>= 1;
+			}
+
+			return_desc->integer.value = temp32;
+			break;
+
+		case AML_FIND_SET_RIGHT_BIT_OP:	/* find_set_right_bit (Operand, Result) */
+
+			return_desc->integer.value = operand[0]->integer.value;
+
+			/*
+			 * The Acpi specification describes Integer type as a little
+			 * endian unsigned value, so this boundary condition is valid.
+			 */
+			for (temp32 = 0; return_desc->integer.value &&
+			     temp32 < ACPI_INTEGER_BIT_SIZE; ++temp32) {
+				return_desc->integer.value <<= 1;
+			}
+
+			/* Since the bit position is one-based, subtract from 33 (65) */
+
+			return_desc->integer.value =
+			    temp32 ==
+			    0 ? 0 : (ACPI_INTEGER_BIT_SIZE + 1) - temp32;
+			break;
+
+		case AML_FROM_BCD_OP:	/* from_bcd (BCDValue, Result) */
+			/*
+			 * The 64-bit ACPI integer can hold 16 4-bit BCD characters
+			 * (if table is 32-bit, integer can hold 8 BCD characters)
+			 * Convert each 4-bit BCD value
+			 */
+			power_of_ten = 1;
+			return_desc->integer.value = 0;
+			digit = operand[0]->integer.value;
+
+			/* Convert each BCD digit (each is one nybble wide) */
+
+			for (i = 0;
+			     (i < acpi_gbl_integer_nybble_width) && (digit > 0);
+			     i++) {
+
+				/* Get the least significant 4-bit BCD digit */
+
+				temp32 = ((u32) digit) & 0xF;
+
+				/* Check the range of the digit */
+
+				if (temp32 > 9) {
+					ACPI_ERROR((AE_INFO,
+						    "BCD digit too large (not decimal): 0x%X",
+						    temp32));
+
+					status = AE_AML_NUMERIC_OVERFLOW;
+					goto cleanup;
+				}
+
+				/* Sum the digit into the result with the current power of 10 */
+
+				return_desc->integer.value +=
+				    (((u64) temp32) * power_of_ten);
+
+				/* Shift to next BCD digit */
+
+				digit >>= 4;
+
+				/* Next power of 10 */
+
+				power_of_ten *= 10;
+			}
+			break;
+
+		case AML_TO_BCD_OP:	/* to_bcd (Operand, Result) */
+
+			return_desc->integer.value = 0;
+			digit = operand[0]->integer.value;
+
+			/* Each BCD digit is one nybble wide */
+
+			for (i = 0;
+			     (i < acpi_gbl_integer_nybble_width) && (digit > 0);
+			     i++) {
+				(void)acpi_ut_short_divide(digit, 10, &digit,
+							   &temp32);
+
+				/*
+				 * Insert the BCD digit that resides in the
+				 * remainder from above
+				 */
+				return_desc->integer.value |=
+				    (((u64) temp32) << ACPI_MUL_4(i));
+			}
+
+			/* Overflow if there is any data left in Digit */
+
+			if (digit > 0) {
+				ACPI_ERROR((AE_INFO,
+					    "Integer too large to convert to BCD: 0x%8.8X%8.8X",
+					    ACPI_FORMAT_UINT64(operand[0]->
+							       integer.value)));
+				status = AE_AML_NUMERIC_OVERFLOW;
+				goto cleanup;
+			}
+			break;
+
+		case AML_COND_REF_OF_OP:	/* cond_ref_of (source_object, Result) */
+			/*
+			 * This op is a little strange because the internal return value is
+			 * different than the return value stored in the result descriptor
+			 * (There are really two return values)
+			 */
+			if ((struct acpi_namespace_node *)operand[0] ==
+			    acpi_gbl_root_node) {
+				/*
+				 * This means that the object does not exist in the namespace,
+				 * return FALSE
+				 */
+				return_desc->integer.value = 0;
+				goto cleanup;
+			}
+
+			/* Get the object reference, store it, and remove our reference */
+
+			status = acpi_ex_get_object_reference(operand[0],
+							      &return_desc2,
+							      walk_state);
+			if (ACPI_FAILURE(status)) {
+				goto cleanup;
+			}
+
+			status =
+			    acpi_ex_store(return_desc2, operand[1], walk_state);
+			acpi_ut_remove_reference(return_desc2);
+
+			/* The object exists in the namespace, return TRUE */
+
+			return_desc->integer.value = ACPI_UINT64_MAX;
+			goto cleanup;
+
+		default:
+
+			/* No other opcodes get here */
+
+			break;
+		}
+		break;
+
+	case AML_STORE_OP:	/* Store (Source, Target) */
+		/*
+		 * A store operand is typically a number, string, buffer or lvalue
+		 * Be careful about deleting the source object,
+		 * since the object itself may have been stored.
+		 */
+		status = acpi_ex_store(operand[0], operand[1], walk_state);
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
+		/* It is possible that the Store already produced a return object */
+
+		if (!walk_state->result_obj) {
+			/*
+			 * Normally, we would remove a reference on the Operand[0]
+			 * parameter; But since it is being used as the internal return
+			 * object (meaning we would normally increment it), the two
+			 * cancel out, and we simply don't do anything.
+			 */
+			walk_state->result_obj = operand[0];
+			walk_state->operands[0] = NULL;	/* Prevent deletion */
+		}
+		return_ACPI_STATUS(status);
+
+		/*
+		 * ACPI 2.0 Opcodes
+		 */
+	case AML_COPY_OP:	/* Copy (Source, Target) */
+
+		status =
+		    acpi_ut_copy_iobject_to_iobject(operand[0], &return_desc,
+						    walk_state);
+		break;
+
+	case AML_TO_DECSTRING_OP:	/* to_decimal_string (Data, Result) */
+
+		status = acpi_ex_convert_to_string(operand[0], &return_desc,
+						   ACPI_EXPLICIT_CONVERT_DECIMAL);
+		if (return_desc == operand[0]) {
+
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference(return_desc);
+		}
+		break;
+
+	case AML_TO_HEXSTRING_OP:	/* to_hex_string (Data, Result) */
+
+		status = acpi_ex_convert_to_string(operand[0], &return_desc,
+						   ACPI_EXPLICIT_CONVERT_HEX);
+		if (return_desc == operand[0]) {
+
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference(return_desc);
+		}
+		break;
+
+	case AML_TO_BUFFER_OP:	/* to_buffer (Data, Result) */
+
+		status = acpi_ex_convert_to_buffer(operand[0], &return_desc);
+		if (return_desc == operand[0]) {
+
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference(return_desc);
+		}
+		break;
+
+	case AML_TO_INTEGER_OP:	/* to_integer (Data, Result) */
+
+		status = acpi_ex_convert_to_integer(operand[0], &return_desc,
+						    ACPI_ANY_BASE);
+		if (return_desc == operand[0]) {
+
+			/* No conversion performed, add ref to handle return value */
+			acpi_ut_add_reference(return_desc);
+		}
+		break;
+
+	case AML_SHIFT_LEFT_BIT_OP:	/* shift_left_bit (Source, bit_num) */
+	case AML_SHIFT_RIGHT_BIT_OP:	/* shift_right_bit (Source, bit_num) */
+
+		/* These are two obsolete opcodes */
+
+		ACPI_ERROR((AE_INFO,
+			    "%s is obsolete and not implemented",
+			    acpi_ps_get_opcode_name(walk_state->opcode)));
+		status = AE_SUPPORT;
+		goto cleanup;
+
+	default:		/* Unknown opcode */
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+	if (ACPI_SUCCESS(status)) {
+
+		/* Store the return value computed above into the target object */
+
+		status = acpi_ex_store(return_desc, operand[1], walk_state);
+	}
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE(status)) {
+		acpi_ut_remove_reference(return_desc);
+	}
+
+	/* Save return object on success */
+
+	else if (!walk_state->result_obj) {
+		walk_state->result_obj = return_desc;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_opcode_1A_0T_1R
+ *
+ * PARAMETERS:  walk_state          - Current state (contains AML opcode)
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Execute opcode with one argument, no target, and a return value
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_opcode_1A_0T_1R(struct acpi_walk_state *walk_state)
+{
+	union acpi_operand_object **operand = &walk_state->operands[0];
+	union acpi_operand_object *temp_desc;
+	union acpi_operand_object *return_desc = NULL;
+	acpi_status status = AE_OK;
+	u32 type;
+	u64 value;
+
+	ACPI_FUNCTION_TRACE_STR(ex_opcode_1A_0T_1R,
+				acpi_ps_get_opcode_name(walk_state->opcode));
+
+	/* Examine the AML opcode */
+
+	switch (walk_state->opcode) {
+	case AML_LNOT_OP:	/* LNot (Operand) */
+
+		return_desc = acpi_ut_create_integer_object((u64) 0);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/*
+		 * Set result to ONES (TRUE) if Value == 0. Note:
+		 * return_desc->Integer.Value is initially == 0 (FALSE) from above.
+		 */
+		if (!operand[0]->integer.value) {
+			return_desc->integer.value = ACPI_UINT64_MAX;
+		}
+		break;
+
+	case AML_DECREMENT_OP:	/* Decrement (Operand)  */
+	case AML_INCREMENT_OP:	/* Increment (Operand)  */
+		/*
+		 * Create a new integer. Can't just get the base integer and
+		 * increment it because it may be an Arg or Field.
+		 */
+		return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+
+		/*
+		 * Since we are expecting a Reference operand, it can be either a
+		 * NS Node or an internal object.
+		 */
+		temp_desc = operand[0];
+		if (ACPI_GET_DESCRIPTOR_TYPE(temp_desc) ==
+		    ACPI_DESC_TYPE_OPERAND) {
+
+			/* Internal reference object - prevent deletion */
+
+			acpi_ut_add_reference(temp_desc);
+		}
+
+		/*
+		 * Convert the Reference operand to an Integer (This removes a
+		 * reference on the Operand[0] object)
+		 *
+		 * NOTE:  We use LNOT_OP here in order to force resolution of the
+		 * reference operand to an actual integer.
+		 */
+		status =
+		    acpi_ex_resolve_operands(AML_LNOT_OP, &temp_desc,
+					     walk_state);
+		if (ACPI_FAILURE(status)) {
+			ACPI_EXCEPTION((AE_INFO, status,
+					"While resolving operands for [%s]",
+					acpi_ps_get_opcode_name(walk_state->
+								opcode)));
+
+			goto cleanup;
+		}
+
+		/*
+		 * temp_desc is now guaranteed to be an Integer object --
+		 * Perform the actual increment or decrement
+		 */
+		if (walk_state->opcode == AML_INCREMENT_OP) {
+			return_desc->integer.value =
+			    temp_desc->integer.value + 1;
+		} else {
+			return_desc->integer.value =
+			    temp_desc->integer.value - 1;
+		}
+
+		/* Finished with this Integer object */
+
+		acpi_ut_remove_reference(temp_desc);
+
+		/*
+		 * Store the result back (indirectly) through the original
+		 * Reference object
+		 */
+		status = acpi_ex_store(return_desc, operand[0], walk_state);
+		break;
+
+	case AML_TYPE_OP:	/* object_type (source_object) */
+		/*
+		 * Note: The operand is not resolved at this point because we want to
+		 * get the associated object, not its value. For example, we don't
+		 * want to resolve a field_unit to its value, we want the actual
+		 * field_unit object.
+		 */
+
+		/* Get the type of the base object */
+
+		status =
+		    acpi_ex_resolve_multiple(walk_state, operand[0], &type,
+					     NULL);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		/* Allocate a descriptor to hold the type. */
+
+		return_desc = acpi_ut_create_integer_object((u64) type);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+		break;
+
+	case AML_SIZE_OF_OP:	/* size_of (source_object) */
+		/*
+		 * Note: The operand is not resolved at this point because we want to
+		 * get the associated object, not its value.
+		 */
+
+		/* Get the base object */
+
+		status = acpi_ex_resolve_multiple(walk_state,
+						  operand[0], &type,
+						  &temp_desc);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		/*
+		 * The type of the base object must be integer, buffer, string, or
+		 * package. All others are not supported.
+		 *
+		 * NOTE: Integer is not specifically supported by the ACPI spec,
+		 * but is supported implicitly via implicit operand conversion.
+		 * rather than bother with conversion, we just use the byte width
+		 * global (4 or 8 bytes).
+		 */
+		switch (type) {
+		case ACPI_TYPE_INTEGER:
+
+			value = acpi_gbl_integer_byte_width;
+			break;
+
+		case ACPI_TYPE_STRING:
+
+			value = temp_desc->string.length;
+			break;
+
+		case ACPI_TYPE_BUFFER:
+
+			/* Buffer arguments may not be evaluated at this point */
+
+			status = acpi_ds_get_buffer_arguments(temp_desc);
+			value = temp_desc->buffer.length;
+			break;
+
+		case ACPI_TYPE_PACKAGE:
+
+			/* Package arguments may not be evaluated at this point */
+
+			status = acpi_ds_get_package_arguments(temp_desc);
+			value = temp_desc->package.count;
+			break;
+
+		default:
+
+			ACPI_ERROR((AE_INFO,
+				    "Operand must be Buffer/Integer/String/Package - found type %s",
+				    acpi_ut_get_type_name(type)));
+			status = AE_AML_OPERAND_TYPE;
+			goto cleanup;
+		}
+
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		/*
+		 * Now that we have the size of the object, create a result
+		 * object to hold the value
+		 */
+		return_desc = acpi_ut_create_integer_object(value);
+		if (!return_desc) {
+			status = AE_NO_MEMORY;
+			goto cleanup;
+		}
+		break;
+
+	case AML_REF_OF_OP:	/* ref_of (source_object) */
+
+		status =
+		    acpi_ex_get_object_reference(operand[0], &return_desc,
+						 walk_state);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+		break;
+
+	case AML_DEREF_OF_OP:	/* deref_of (obj_reference | String) */
+
+		/* Check for a method local or argument, or standalone String */
+
+		if (ACPI_GET_DESCRIPTOR_TYPE(operand[0]) ==
+		    ACPI_DESC_TYPE_NAMED) {
+			temp_desc =
+			    acpi_ns_get_attached_object((struct
+							 acpi_namespace_node *)
+							operand[0]);
+			if (temp_desc
+			    && ((temp_desc->common.type == ACPI_TYPE_STRING)
+				|| (temp_desc->common.type ==
+				    ACPI_TYPE_LOCAL_REFERENCE))) {
+				operand[0] = temp_desc;
+				acpi_ut_add_reference(temp_desc);
+			} else {
+				status = AE_AML_OPERAND_TYPE;
+				goto cleanup;
+			}
+		} else {
+			switch ((operand[0])->common.type) {
+			case ACPI_TYPE_LOCAL_REFERENCE:
+				/*
+				 * This is a deref_of (local_x | arg_x)
+				 *
+				 * Must resolve/dereference the local/arg reference first
+				 */
+				switch (operand[0]->reference.class) {
+				case ACPI_REFCLASS_LOCAL:
+				case ACPI_REFCLASS_ARG:
+
+					/* Set Operand[0] to the value of the local/arg */
+
+					status =
+					    acpi_ds_method_data_get_value
+					    (operand[0]->reference.class,
+					     operand[0]->reference.value,
+					     walk_state, &temp_desc);
+					if (ACPI_FAILURE(status)) {
+						goto cleanup;
+					}
+
+					/*
+					 * Delete our reference to the input object and
+					 * point to the object just retrieved
+					 */
+					acpi_ut_remove_reference(operand[0]);
+					operand[0] = temp_desc;
+					break;
+
+				case ACPI_REFCLASS_REFOF:
+
+					/* Get the object to which the reference refers */
+
+					temp_desc =
+					    operand[0]->reference.object;
+					acpi_ut_remove_reference(operand[0]);
+					operand[0] = temp_desc;
+					break;
+
+				default:
+
+					/* Must be an Index op - handled below */
+					break;
+				}
+				break;
+
+			case ACPI_TYPE_STRING:
+
+				break;
+
+			default:
+
+				status = AE_AML_OPERAND_TYPE;
+				goto cleanup;
+			}
+		}
+
+		if (ACPI_GET_DESCRIPTOR_TYPE(operand[0]) !=
+		    ACPI_DESC_TYPE_NAMED) {
+			if ((operand[0])->common.type == ACPI_TYPE_STRING) {
+				/*
+				 * This is a deref_of (String). The string is a reference
+				 * to a named ACPI object.
+				 *
+				 * 1) Find the owning Node
+				 * 2) Dereference the node to an actual object. Could be a
+				 *    Field, so we need to resolve the node to a value.
+				 */
+				status =
+				    acpi_ns_get_node(walk_state->scope_info->
+						     scope.node,
+						     operand[0]->string.pointer,
+						     ACPI_NS_SEARCH_PARENT,
+						     ACPI_CAST_INDIRECT_PTR
+						     (struct
+						      acpi_namespace_node,
+						      &return_desc));
+				if (ACPI_FAILURE(status)) {
+					goto cleanup;
+				}
+
+				status =
+				    acpi_ex_resolve_node_to_value
+				    (ACPI_CAST_INDIRECT_PTR
+				     (struct acpi_namespace_node, &return_desc),
+				     walk_state);
+				goto cleanup;
+			}
+		}
+
+		/* Operand[0] may have changed from the code above */
+
+		if (ACPI_GET_DESCRIPTOR_TYPE(operand[0]) ==
+		    ACPI_DESC_TYPE_NAMED) {
+			/*
+			 * This is a deref_of (object_reference)
+			 * Get the actual object from the Node (This is the dereference).
+			 * This case may only happen when a local_x or arg_x is
+			 * dereferenced above.
+			 */
+			return_desc = acpi_ns_get_attached_object((struct
+								   acpi_namespace_node
+								   *)
+								  operand[0]);
+			acpi_ut_add_reference(return_desc);
+		} else {
+			/*
+			 * This must be a reference object produced by either the
+			 * Index() or ref_of() operator
+			 */
+			switch (operand[0]->reference.class) {
+			case ACPI_REFCLASS_INDEX:
+				/*
+				 * The target type for the Index operator must be
+				 * either a Buffer or a Package
+				 */
+				switch (operand[0]->reference.target_type) {
+				case ACPI_TYPE_BUFFER_FIELD:
+
+					temp_desc =
+					    operand[0]->reference.object;
+
+					/*
+					 * Create a new object that contains one element of the
+					 * buffer -- the element pointed to by the index.
+					 *
+					 * NOTE: index into a buffer is NOT a pointer to a
+					 * sub-buffer of the main buffer, it is only a pointer to a
+					 * single element (byte) of the buffer!
+					 *
+					 * Since we are returning the value of the buffer at the
+					 * indexed location, we don't need to add an additional
+					 * reference to the buffer itself.
+					 */
+					return_desc =
+					    acpi_ut_create_integer_object((u64)
+									  temp_desc->buffer.pointer[operand[0]->reference.value]);
+					if (!return_desc) {
+						status = AE_NO_MEMORY;
+						goto cleanup;
+					}
+					break;
+
+				case ACPI_TYPE_PACKAGE:
+					/*
+					 * Return the referenced element of the package. We must
+					 * add another reference to the referenced object, however.
+					 */
+					return_desc =
+					    *(operand[0]->reference.where);
+					if (!return_desc) {
+						/*
+						 * Element is NULL, do not allow the dereference.
+						 * This provides compatibility with other ACPI
+						 * implementations.
+						 */
+						return_ACPI_STATUS
+						    (AE_AML_UNINITIALIZED_ELEMENT);
+					}
+
+					acpi_ut_add_reference(return_desc);
+					break;
+
+				default:
+
+					ACPI_ERROR((AE_INFO,
+						    "Unknown Index TargetType 0x%X in reference object %p",
+						    operand[0]->reference.
+						    target_type, operand[0]));
+					status = AE_AML_OPERAND_TYPE;
+					goto cleanup;
+				}
+				break;
+
+			case ACPI_REFCLASS_REFOF:
+
+				return_desc = operand[0]->reference.object;
+
+				if (ACPI_GET_DESCRIPTOR_TYPE(return_desc) ==
+				    ACPI_DESC_TYPE_NAMED) {
+					return_desc =
+					    acpi_ns_get_attached_object((struct
+									 acpi_namespace_node
+									 *)
+									return_desc);
+					if (!return_desc) {
+						break;
+					}
+
+					/*
+					 * June 2013:
+					 * buffer_fields/field_units require additional resolution
+					 */
+					switch (return_desc->common.type) {
+					case ACPI_TYPE_BUFFER_FIELD:
+					case ACPI_TYPE_LOCAL_REGION_FIELD:
+					case ACPI_TYPE_LOCAL_BANK_FIELD:
+					case ACPI_TYPE_LOCAL_INDEX_FIELD:
+
+						status =
+						    acpi_ex_read_data_from_field
+						    (walk_state, return_desc,
+						     &temp_desc);
+						if (ACPI_FAILURE(status)) {
+							goto cleanup;
+						}
+
+						return_desc = temp_desc;
+						break;
+
+					default:
+
+						/* Add another reference to the object */
+
+						acpi_ut_add_reference
+						    (return_desc);
+						break;
+					}
+				}
+				break;
+
+			default:
+
+				ACPI_ERROR((AE_INFO,
+					    "Unknown class in reference(%p) - 0x%2.2X",
+					    operand[0],
+					    operand[0]->reference.class));
+
+				status = AE_TYPE;
+				goto cleanup;
+			}
+		}
+		break;
+
+	default:
+
+		ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
+			    walk_state->opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+cleanup:
+
+	/* Delete return object on error */
+
+	if (ACPI_FAILURE(status)) {
+		acpi_ut_remove_reference(return_desc);
+	}
+
+	/* Save return object on success */
+
+	else {
+		walk_state->result_obj = return_desc;
+	}
+
+	return_ACPI_STATUS(status);
+}