Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 570 insertions, 0 deletions

diff --git a/kernel/drivers/acpi/acpica/dswload.c b/kernel/drivers/acpi/acpica/dswload.c
new file mode 100644
index 000000000..843942fb4
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/dswload.c
@@ -0,0 +1,570 @@
+/******************************************************************************
+ *
+ * Module Name: dswload - Dispatcher first pass namespace load callbacks
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acparser.h"
+#include "amlcode.h"
+#include "acdispat.h"
+#include "acinterp.h"
+#include "acnamesp.h"
+
+#ifdef ACPI_ASL_COMPILER
+#include "acdisasm.h"
+#endif
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dswload")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_callbacks
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              pass_number     - 1, 2, or 3
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Init walk state callbacks
+ *
+ ******************************************************************************/
+acpi_status
+acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
+{
+
+	switch (pass_number) {
+	case 0:
+
+		/* Parse only - caller will setup callbacks */
+
+		walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
+		    ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE;
+		walk_state->descending_callback = NULL;
+		walk_state->ascending_callback = NULL;
+		break;
+
+	case 1:
+
+		/* Load pass 1 */
+
+		walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
+		    ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_load1_begin_op;
+		walk_state->ascending_callback = acpi_ds_load1_end_op;
+		break;
+
+	case 2:
+
+		/* Load pass 2 */
+
+		walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
+		    ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_load2_begin_op;
+		walk_state->ascending_callback = acpi_ds_load2_end_op;
+		break;
+
+	case 3:
+
+		/* Execution pass */
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+		walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
+		    ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_exec_begin_op;
+		walk_state->ascending_callback = acpi_ds_exec_end_op;
+#endif
+		break;
+
+	default:
+
+		return (AE_BAD_PARAMETER);
+	}
+
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load1_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              out_op          - Where to return op if a new one is created
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,
+		       union acpi_parse_object ** out_op)
+{
+	union acpi_parse_object *op;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+	acpi_object_type object_type;
+	char *path;
+	u32 flags;
+
+	ACPI_FUNCTION_TRACE(ds_load1_begin_op);
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
+			  walk_state));
+
+	/* We are only interested in opcodes that have an associated name */
+
+	if (op) {
+		if (!(walk_state->op_info->flags & AML_NAMED)) {
+			*out_op = op;
+			return_ACPI_STATUS(AE_OK);
+		}
+
+		/* Check if this object has already been installed in the namespace */
+
+		if (op->common.node) {
+			*out_op = op;
+			return_ACPI_STATUS(AE_OK);
+		}
+	}
+
+	path = acpi_ps_get_next_namestring(&walk_state->parser_state);
+
+	/* Map the raw opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+			  "State=%p Op=%p [%s]\n", walk_state, op,
+			  acpi_ut_get_type_name(object_type)));
+
+	switch (walk_state->opcode) {
+	case AML_SCOPE_OP:
+		/*
+		 * The target name of the Scope() operator must exist at this point so
+		 * that we can actually open the scope to enter new names underneath it.
+		 * Allow search-to-root for single namesegs.
+		 */
+		status =
+		    acpi_ns_lookup(walk_state->scope_info, path, object_type,
+				   ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
+				   walk_state, &(node));
+#ifdef ACPI_ASL_COMPILER
+		if (status == AE_NOT_FOUND) {
+			/*
+			 * Table disassembly:
+			 * Target of Scope() not found. Generate an External for it, and
+			 * insert the name into the namespace.
+			 */
+			acpi_dm_add_op_to_external_list(op, path,
+							ACPI_TYPE_DEVICE, 0, 0);
+			status =
+			    acpi_ns_lookup(walk_state->scope_info, path,
+					   object_type, ACPI_IMODE_LOAD_PASS1,
+					   ACPI_NS_SEARCH_PARENT, walk_state,
+					   &node);
+		}
+#endif
+		if (ACPI_FAILURE(status)) {
+			ACPI_ERROR_NAMESPACE(path, status);
+			return_ACPI_STATUS(status);
+		}
+
+		/*
+		 * Check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_ANY:
+		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope  */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+			/*
+			 * These types we will allow, but we will change the type.
+			 * This enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 *
+			 * Note: silently change the type here. On the second pass,
+			 * we will report a warning
+			 */
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "Type override - [%4.4s] had invalid type (%s) "
+					  "for Scope operator, changed to type ANY\n",
+					  acpi_ut_get_node_name(node),
+					  acpi_ut_get_type_name(node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		case ACPI_TYPE_METHOD:
+			/*
+			 * Allow scope change to root during execution of module-level
+			 * code. Root is typed METHOD during this time.
+			 */
+			if ((node == acpi_gbl_root_node) &&
+			    (walk_state->
+			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
+				break;
+			}
+
+			/*lint -fallthrough */
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_ERROR((AE_INFO,
+				    "Invalid type (%s) for target of "
+				    "Scope operator [%4.4s] (Cannot override)",
+				    acpi_ut_get_type_name(node->type),
+				    acpi_ut_get_node_name(node)));
+
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+	default:
+		/*
+		 * For all other named opcodes, we will enter the name into
+		 * the namespace.
+		 *
+		 * Setup the search flags.
+		 * Since we are entering a name into the namespace, we do not want to
+		 * enable the search-to-root upsearch.
+		 *
+		 * There are only two conditions where it is acceptable that the name
+		 * already exists:
+		 *    1) the Scope() operator can reopen a scoping object that was
+		 *       previously defined (Scope, Method, Device, etc.)
+		 *    2) Whenever we are parsing a deferred opcode (op_region, Buffer,
+		 *       buffer_field, or Package), the name of the object is already
+		 *       in the namespace.
+		 */
+		if (walk_state->deferred_node) {
+
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		/*
+		 * If we are executing a method, do not create any namespace objects
+		 * during the load phase, only during execution.
+		 */
+		if (walk_state->method_node) {
+			node = NULL;
+			status = AE_OK;
+			break;
+		}
+
+		flags = ACPI_NS_NO_UPSEARCH;
+		if ((walk_state->opcode != AML_SCOPE_OP) &&
+		    (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
+			flags |= ACPI_NS_ERROR_IF_FOUND;
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "[%s] Cannot already exist\n",
+					  acpi_ut_get_type_name(object_type)));
+		} else {
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "[%s] Both Find or Create allowed\n",
+					  acpi_ut_get_type_name(object_type)));
+		}
+
+		/*
+		 * Enter the named type into the internal namespace. We enter the name
+		 * as we go downward in the parse tree. Any necessary subobjects that
+		 * involve arguments to the opcode must be created as we go back up the
+		 * parse tree later.
+		 */
+		status =
+		    acpi_ns_lookup(walk_state->scope_info, path, object_type,
+				   ACPI_IMODE_LOAD_PASS1, flags, walk_state,
+				   &node);
+		if (ACPI_FAILURE(status)) {
+			if (status == AE_ALREADY_EXISTS) {
+
+				/* The name already exists in this scope */
+
+				if (node->flags & ANOBJ_IS_EXTERNAL) {
+					/*
+					 * Allow one create on an object or segment that was
+					 * previously declared External
+					 */
+					node->flags &= ~ANOBJ_IS_EXTERNAL;
+					node->type = (u8) object_type;
+
+					/* Just retyped a node, probably will need to open a scope */
+
+					if (acpi_ns_opens_scope(object_type)) {
+						status =
+						    acpi_ds_scope_stack_push
+						    (node, object_type,
+						     walk_state);
+						if (ACPI_FAILURE(status)) {
+							return_ACPI_STATUS
+							    (status);
+						}
+					}
+
+					status = AE_OK;
+				}
+			}
+
+			if (ACPI_FAILURE(status)) {
+				ACPI_ERROR_NAMESPACE(path, status);
+				return_ACPI_STATUS(status);
+			}
+		}
+		break;
+	}
+
+	/* Common exit */
+
+	if (!op) {
+
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op(walk_state->opcode);
+		if (!op) {
+			return_ACPI_STATUS(AE_NO_MEMORY);
+		}
+	}
+
+	/* Initialize the op */
+
+#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
+	op->named.path = ACPI_CAST_PTR(u8, path);
+#endif
+
+	if (node) {
+		/*
+		 * Put the Node in the "op" object that the parser uses, so we
+		 * can get it again quickly when this scope is closed
+		 */
+		op->common.node = node;
+		op->named.name = node->name.integer;
+	}
+
+	acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
+			   op);
+	*out_op = op;
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load1_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
+{
+	union acpi_parse_object *op;
+	acpi_object_type object_type;
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE(ds_load1_end_op);
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
+			  walk_state));
+
+	/* We are only interested in opcodes that have an associated name */
+
+	if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the object type to determine if we should pop the scope */
+
+	object_type = walk_state->op_info->object_type;
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+	if (walk_state->op_info->flags & AML_FIELD) {
+		/*
+		 * If we are executing a method, do not create any namespace objects
+		 * during the load phase, only during execution.
+		 */
+		if (!walk_state->method_node) {
+			if (walk_state->opcode == AML_FIELD_OP ||
+			    walk_state->opcode == AML_BANK_FIELD_OP ||
+			    walk_state->opcode == AML_INDEX_FIELD_OP) {
+				status =
+				    acpi_ds_init_field_objects(op, walk_state);
+			}
+		}
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * If we are executing a method, do not create any namespace objects
+	 * during the load phase, only during execution.
+	 */
+	if (!walk_state->method_node) {
+		if (op->common.aml_opcode == AML_REGION_OP) {
+			status =
+			    acpi_ex_create_region(op->named.data,
+						  op->named.length,
+						  (acpi_adr_space_type) ((op->
+									  common.
+									  value.
+									  arg)->
+									 common.
+									 value.
+									 integer),
+						  walk_state);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		} else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
+			status =
+			    acpi_ex_create_region(op->named.data,
+						  op->named.length,
+						  ACPI_ADR_SPACE_DATA_TABLE,
+						  walk_state);
+			if (ACPI_FAILURE(status)) {
+				return_ACPI_STATUS(status);
+			}
+		}
+	}
+#endif
+
+	if (op->common.aml_opcode == AML_NAME_OP) {
+
+		/* For Name opcode, get the object type from the argument */
+
+		if (op->common.value.arg) {
+			object_type = (acpi_ps_get_opcode_info((op->common.
+								value.arg)->
+							       common.
+							       aml_opcode))->
+			    object_type;
+
+			/* Set node type if we have a namespace node */
+
+			if (op->common.node) {
+				op->common.node->type = (u8) object_type;
+			}
+		}
+	}
+
+	/*
+	 * If we are executing a method, do not create any namespace objects
+	 * during the load phase, only during execution.
+	 */
+	if (!walk_state->method_node) {
+		if (op->common.aml_opcode == AML_METHOD_OP) {
+			/*
+			 * method_op pkg_length name_string method_flags term_list
+			 *
+			 * Note: We must create the method node/object pair as soon as we
+			 * see the method declaration. This allows later pass1 parsing
+			 * of invocations of the method (need to know the number of
+			 * arguments.)
+			 */
+			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+					  "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
+					  walk_state, op, op->named.node));
+
+			if (!acpi_ns_get_attached_object(op->named.node)) {
+				walk_state->operands[0] =
+				    ACPI_CAST_PTR(void, op->named.node);
+				walk_state->num_operands = 1;
+
+				status =
+				    acpi_ds_create_operands(walk_state,
+							    op->common.value.
+							    arg);
+				if (ACPI_SUCCESS(status)) {
+					status =
+					    acpi_ex_create_method(op->named.
+								  data,
+								  op->named.
+								  length,
+								  walk_state);
+				}
+
+				walk_state->operands[0] = NULL;
+				walk_state->num_operands = 0;
+
+				if (ACPI_FAILURE(status)) {
+					return_ACPI_STATUS(status);
+				}
+			}
+		}
+	}
+
+	/* Pop the scope stack (only if loading a table) */
+
+	if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
+		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
+				  "(%s): Popping scope for Op %p\n",
+				  acpi_ut_get_type_name(object_type), op));
+
+		status = acpi_ds_scope_stack_pop(walk_state);
+	}
+
+	return_ACPI_STATUS(status);
+}