These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 369 insertions, 0 deletions

diff --git a/kernel/drivers/acpi/acpica/dbmethod.c b/kernel/drivers/acpi/acpica/dbmethod.c
new file mode 100644
index 000000000..01e5a7114
--- /dev/null
+++ b/kernel/drivers/acpi/acpica/dbmethod.c
@@ -0,0 +1,369 @@
+/*******************************************************************************
+ *
+ * Module Name: dbmethod - Debug commands for control methods
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2015, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acdispat.h"
+#include "acnamesp.h"
+#include "acdebug.h"
+#include "acparser.h"
+#include "acpredef.h"
+
+#define _COMPONENT          ACPI_CA_DEBUGGER
+ACPI_MODULE_NAME("dbmethod")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_db_set_method_breakpoint
+ *
+ * PARAMETERS:  location            - AML offset of breakpoint
+ *              walk_state          - Current walk info
+ *              op                  - Current Op (from parse walk)
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Set a breakpoint in a control method at the specified
+ *              AML offset
+ *
+ ******************************************************************************/
+void
+acpi_db_set_method_breakpoint(char *location,
+			      struct acpi_walk_state *walk_state,
+			      union acpi_parse_object *op)
+{
+	u32 address;
+	u32 aml_offset;
+
+	if (!op) {
+		acpi_os_printf("There is no method currently executing\n");
+		return;
+	}
+
+	/* Get and verify the breakpoint address */
+
+	address = strtoul(location, NULL, 16);
+	aml_offset = (u32)ACPI_PTR_DIFF(op->common.aml,
+					walk_state->parser_state.aml_start);
+	if (address <= aml_offset) {
+		acpi_os_printf("Breakpoint %X is beyond current address %X\n",
+			       address, aml_offset);
+	}
+
+	/* Save breakpoint in current walk */
+
+	walk_state->user_breakpoint = address;
+	acpi_os_printf("Breakpoint set at AML offset %X\n", address);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_db_set_method_call_breakpoint
+ *
+ * PARAMETERS:  op                  - Current Op (from parse walk)
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Set a breakpoint in a control method at the specified
+ *              AML offset
+ *
+ ******************************************************************************/
+
+void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op)
+{
+
+	if (!op) {
+		acpi_os_printf("There is no method currently executing\n");
+		return;
+	}
+
+	acpi_gbl_step_to_next_call = TRUE;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_db_set_method_data
+ *
+ * PARAMETERS:  type_arg        - L for local, A for argument
+ *              index_arg       - which one
+ *              value_arg       - Value to set.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Set a local or argument for the running control method.
+ *              NOTE: only object supported is Number.
+ *
+ ******************************************************************************/
+
+void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg)
+{
+	char type;
+	u32 index;
+	u32 value;
+	struct acpi_walk_state *walk_state;
+	union acpi_operand_object *obj_desc;
+	acpi_status status;
+	struct acpi_namespace_node *node;
+
+	/* Validate type_arg */
+
+	acpi_ut_strupr(type_arg);
+	type = type_arg[0];
+	if ((type != 'L') && (type != 'A') && (type != 'N')) {
+		acpi_os_printf("Invalid SET operand: %s\n", type_arg);
+		return;
+	}
+
+	value = strtoul(value_arg, NULL, 16);
+
+	if (type == 'N') {
+		node = acpi_db_convert_to_node(index_arg);
+		if (!node) {
+			return;
+		}
+
+		if (node->type != ACPI_TYPE_INTEGER) {
+			acpi_os_printf("Can only set Integer nodes\n");
+			return;
+		}
+		obj_desc = node->object;
+		obj_desc->integer.value = value;
+		return;
+	}
+
+	/* Get the index and value */
+
+	index = strtoul(index_arg, NULL, 16);
+
+	walk_state = acpi_ds_get_current_walk_state(acpi_gbl_current_walk_list);
+	if (!walk_state) {
+		acpi_os_printf("There is no method currently executing\n");
+		return;
+	}
+
+	/* Create and initialize the new object */
+
+	obj_desc = acpi_ut_create_integer_object((u64)value);
+	if (!obj_desc) {
+		acpi_os_printf("Could not create an internal object\n");
+		return;
+	}
+
+	/* Store the new object into the target */
+
+	switch (type) {
+	case 'A':
+
+		/* Set a method argument */
+
+		if (index > ACPI_METHOD_MAX_ARG) {
+			acpi_os_printf("Arg%u - Invalid argument name\n",
+				       index);
+			goto cleanup;
+		}
+
+		status = acpi_ds_store_object_to_local(ACPI_REFCLASS_ARG,
+						       index, obj_desc,
+						       walk_state);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		obj_desc = walk_state->arguments[index].object;
+
+		acpi_os_printf("Arg%u: ", index);
+		acpi_db_display_internal_object(obj_desc, walk_state);
+		break;
+
+	case 'L':
+
+		/* Set a method local */
+
+		if (index > ACPI_METHOD_MAX_LOCAL) {
+			acpi_os_printf
+			    ("Local%u - Invalid local variable name\n", index);
+			goto cleanup;
+		}
+
+		status = acpi_ds_store_object_to_local(ACPI_REFCLASS_LOCAL,
+						       index, obj_desc,
+						       walk_state);
+		if (ACPI_FAILURE(status)) {
+			goto cleanup;
+		}
+
+		obj_desc = walk_state->local_variables[index].object;
+
+		acpi_os_printf("Local%u: ", index);
+		acpi_db_display_internal_object(obj_desc, walk_state);
+		break;
+
+	default:
+
+		break;
+	}
+
+cleanup:
+	acpi_ut_remove_reference(obj_desc);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_db_disassemble_aml
+ *
+ * PARAMETERS:  statements          - Number of statements to disassemble
+ *              op                  - Current Op (from parse walk)
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
+ *              of statements specified.
+ *
+ ******************************************************************************/
+
+void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op)
+{
+	u32 num_statements = 8;
+
+	if (!op) {
+		acpi_os_printf("There is no method currently executing\n");
+		return;
+	}
+
+	if (statements) {
+		num_statements = strtoul(statements, NULL, 0);
+	}
+#ifdef ACPI_DISASSEMBLER
+	acpi_dm_disassemble(NULL, op, num_statements);
+#endif
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_db_disassemble_method
+ *
+ * PARAMETERS:  name            - Name of control method
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Display disassembled AML (ASL) starting from Op for the number
+ *              of statements specified.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_db_disassemble_method(char *name)
+{
+	acpi_status status;
+	union acpi_parse_object *op;
+	struct acpi_walk_state *walk_state;
+	union acpi_operand_object *obj_desc;
+	struct acpi_namespace_node *method;
+
+	method = acpi_db_convert_to_node(name);
+	if (!method) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	if (method->type != ACPI_TYPE_METHOD) {
+		ACPI_ERROR((AE_INFO, "%s (%s): Object must be a control method",
+			    name, acpi_ut_get_type_name(method->type)));
+		return (AE_BAD_PARAMETER);
+	}
+
+	obj_desc = method->object;
+
+	op = acpi_ps_create_scope_op(obj_desc->method.aml_start);
+	if (!op) {
+		return (AE_NO_MEMORY);
+	}
+
+	/* Create and initialize a new walk state */
+
+	walk_state = acpi_ds_create_walk_state(0, op, NULL, NULL);
+	if (!walk_state) {
+		return (AE_NO_MEMORY);
+	}
+
+	status = acpi_ds_init_aml_walk(walk_state, op, NULL,
+				       obj_desc->method.aml_start,
+				       obj_desc->method.aml_length, NULL,
+				       ACPI_IMODE_LOAD_PASS1);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	status = acpi_ut_allocate_owner_id(&obj_desc->method.owner_id);
+	walk_state->owner_id = obj_desc->method.owner_id;
+
+	/* Push start scope on scope stack and make it current */
+
+	status = acpi_ds_scope_stack_push(method, method->type, walk_state);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* Parse the entire method AML including deferred operators */
+
+	walk_state->parse_flags &= ~ACPI_PARSE_DELETE_TREE;
+	walk_state->parse_flags |= ACPI_PARSE_DISASSEMBLE;
+
+	status = acpi_ps_parse_aml(walk_state);
+
+#ifdef ACPI_DISASSEMBLER
+	(void)acpi_dm_parse_deferred_ops(op);
+
+	/* Now we can disassemble the method */
+
+	acpi_gbl_dm_opt_verbose = FALSE;
+	acpi_dm_disassemble(NULL, op, 0);
+	acpi_gbl_dm_opt_verbose = TRUE;
+#endif
+
+	acpi_ps_delete_parse_tree(op);
+
+	/* Method cleanup */
+
+	acpi_ns_delete_namespace_subtree(method);
+	acpi_ns_delete_namespace_by_owner(obj_desc->method.owner_id);
+	acpi_ut_release_owner_id(&obj_desc->method.owner_id);
+	return (AE_OK);
+}