Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 489 insertions, 0 deletions

diff --git a/kernel/arch/xtensa/Kconfig b/kernel/arch/xtensa/Kconfig
new file mode 100644
index 000000000..87be10e8b
--- /dev/null
+++ b/kernel/arch/xtensa/Kconfig
@@ -0,0 +1,489 @@
+config ZONE_DMA
+	def_bool y
+
+config XTENSA
+	def_bool y
+	select ARCH_WANT_FRAME_POINTERS
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BUILDTIME_EXTABLE_SORT
+	select CLONE_BACKWARDS
+	select COMMON_CLK
+	select GENERIC_ATOMIC64
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SCHED_CLOCK
+	select HAVE_FUNCTION_TRACER
+	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_OPROFILE
+	select HAVE_PERF_EVENTS
+	select IRQ_DOMAIN
+	select MODULES_USE_ELF_RELA
+	select VIRT_TO_BUS
+	help
+	  Xtensa processors are 32-bit RISC machines designed by Tensilica
+	  primarily for embedded systems.  These processors are both
+	  configurable and extensible.  The Linux port to the Xtensa
+	  architecture supports all processor configurations and extensions,
+	  with reasonable minimum requirements.  The Xtensa Linux project has
+	  a home page at <http://www.linux-xtensa.org/>.
+
+config RWSEM_XCHGADD_ALGORITHM
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config NO_IOPORT_MAP
+	def_bool n
+
+config HZ
+	int
+	default 100
+
+source "init/Kconfig"
+source "kernel/Kconfig.freezer"
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config MMU
+	bool
+	default n if !XTENSA_VARIANT_CUSTOM
+	default XTENSA_VARIANT_MMU if XTENSA_VARIANT_CUSTOM
+
+config VARIANT_IRQ_SWITCH
+	def_bool n
+
+config HAVE_XTENSA_GPIO32
+	def_bool n
+
+config MAY_HAVE_SMP
+	def_bool n
+
+menu "Processor type and features"
+
+choice
+	prompt "Xtensa Processor Configuration"
+	default XTENSA_VARIANT_FSF
+
+config XTENSA_VARIANT_FSF
+	bool "fsf - default (not generic) configuration"
+	select MMU
+
+config XTENSA_VARIANT_DC232B
+	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
+	select MMU
+	select HAVE_XTENSA_GPIO32
+	help
+	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
+
+config XTENSA_VARIANT_DC233C
+	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
+	select MMU
+	select HAVE_XTENSA_GPIO32
+	help
+	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).
+
+config XTENSA_VARIANT_CUSTOM
+	bool "Custom Xtensa processor configuration"
+	select MAY_HAVE_SMP
+	select HAVE_XTENSA_GPIO32
+	help
+	  Select this variant to use a custom Xtensa processor configuration.
+	  You will be prompted for a processor variant CORENAME.
+endchoice
+
+config XTENSA_VARIANT_CUSTOM_NAME
+	string "Xtensa Processor Custom Core Variant Name"
+	depends on XTENSA_VARIANT_CUSTOM
+	help
+	  Provide the name of a custom Xtensa processor variant.
+	  This CORENAME selects arch/xtensa/variant/CORENAME.
+	  Dont forget you have to select MMU if you have one.
+
+config XTENSA_VARIANT_NAME
+	string
+	default "dc232b"			if XTENSA_VARIANT_DC232B
+	default "dc233c"			if XTENSA_VARIANT_DC233C
+	default "fsf"				if XTENSA_VARIANT_FSF
+	default XTENSA_VARIANT_CUSTOM_NAME	if XTENSA_VARIANT_CUSTOM
+
+config XTENSA_VARIANT_MMU
+	bool "Core variant has a Full MMU (TLB, Pages, Protection, etc)"
+	depends on XTENSA_VARIANT_CUSTOM
+	default y
+	help
+	  Build a Conventional Kernel with full MMU support,
+	  ie: it supports a TLB with auto-loading, page protection.
+
+config XTENSA_UNALIGNED_USER
+	bool "Unaligned memory access in use space"
+	help
+	  The Xtensa architecture currently does not handle unaligned
+	  memory accesses in hardware but through an exception handler.
+	  Per default, unaligned memory accesses are disabled in user space.
+
+	  Say Y here to enable unaligned memory access in user space.
+
+source "kernel/Kconfig.preempt"
+
+config HAVE_SMP
+	bool "System Supports SMP (MX)"
+	depends on MAY_HAVE_SMP
+	select XTENSA_MX
+	help
+	  This option is use to indicate that the system-on-a-chip (SOC)
+	  supports Multiprocessing. Multiprocessor support implemented above
+	  the CPU core definition and currently needs to be selected manually.
+
+	  Multiprocessor support in implemented with external cache and
+	  interrupt controlers.
+
+	  The MX interrupt distributer adds Interprocessor Interrupts
+	  and causes the IRQ numbers to be increased by 4 for devices
+	  like the open cores ethernet driver and the serial interface.
+
+	  You still have to select "Enable SMP" to enable SMP on this SOC.
+
+config SMP
+	bool "Enable Symmetric multi-processing support"
+	depends on HAVE_SMP
+	select GENERIC_SMP_IDLE_THREAD
+	help
+	  Enabled SMP Software; allows more than one CPU/CORE
+	  to be activated during startup.
+
+config NR_CPUS
+	depends on SMP
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	default "4"
+
+config HOTPLUG_CPU
+	bool "Enable CPU hotplug support"
+	depends on SMP
+	help
+	  Say Y here to allow turning CPUs off and on. CPUs can be
+	  controlled through /sys/devices/system/cpu.
+
+	  Say N if you want to disable CPU hotplug.
+
+config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	bool "Initialize Xtensa MMU inside the Linux kernel code"
+	default y
+	help
+	  Earlier version initialized the MMU in the exception vector
+	  before jumping to _startup in head.S and had an advantage that
+	  it was possible to place a software breakpoint at 'reset' and
+	  then enter your normal kernel breakpoints once the MMU was mapped
+	  to the kernel mappings (0XC0000000).
+
+	  This unfortunately doesn't work for U-Boot and likley also wont
+	  work for using KEXEC to have a hot kernel ready for doing a
+	  KDUMP.
+
+	  So now the MMU is initialized in head.S but it's necessary to
+	  use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup.
+	  xt-gdb can't place a Software Breakpoint in the  0XD region prior
+	  to mapping the MMU and after mapping even if the area of low memory
+	  was mapped gdb wouldn't remove the breakpoint on hitting it as the
+	  PC wouldn't match. Since Hardware Breakpoints are recommended for
+	  Linux configurations it seems reasonable to just assume they exist
+	  and leave this older mechanism for unfortunate souls that choose
+	  not to follow Tensilica's recommendation.
+
+	  Selecting this will cause U-Boot to set the KERNEL Load and Entry
+	  address at 0x00003000 instead of the mapped std of 0xD0003000.
+
+	  If in doubt, say Y.
+
+config HIGHMEM
+	bool "High Memory Support"
+	depends on MMU
+	help
+	  Linux can use the full amount of RAM in the system by
+	  default. However, the default MMUv2 setup only maps the
+	  lowermost 128 MB of memory linearly to the areas starting
+	  at 0xd0000000 (cached) and 0xd8000000 (uncached).
+	  When there are more than 128 MB memory in the system not
+	  all of it can be "permanently mapped" by the kernel.
+	  The physical memory that's not permanently mapped is called
+	  "high memory".
+
+	  If you are compiling a kernel which will never run on a
+	  machine with more than 128 MB total physical RAM, answer
+	  N here.
+
+	  If unsure, say Y.
+
+config FAST_SYSCALL_XTENSA
+	bool "Enable fast atomic syscalls"
+	default n
+	help
+	  fast_syscall_xtensa is a syscall that can make atomic operations
+	  on UP kernel when processor has no s32c1i support.
+
+	  This syscall is deprecated. It may have issues when called with
+	  invalid arguments. It is provided only for backwards compatibility.
+	  Only enable it if your userspace software requires it.
+
+	  If unsure, say N.
+
+config FAST_SYSCALL_SPILL_REGISTERS
+	bool "Enable spill registers syscall"
+	default n
+	help
+	  fast_syscall_spill_registers is a syscall that spills all active
+	  register windows of a calling userspace task onto its stack.
+
+	  This syscall is deprecated. It may have issues when called with
+	  invalid arguments. It is provided only for backwards compatibility.
+	  Only enable it if your userspace software requires it.
+
+	  If unsure, say N.
+
+endmenu
+
+config XTENSA_CALIBRATE_CCOUNT
+	def_bool n
+	help
+	  On some platforms (XT2000, for example), the CPU clock rate can
+	  vary.  The frequency can be determined, however, by measuring
+	  against a well known, fixed frequency, such as an UART oscillator.
+
+config SERIAL_CONSOLE
+	def_bool n
+
+menu "Bus options"
+
+config PCI
+	bool "PCI support"
+	default y
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+source "drivers/pci/Kconfig"
+
+endmenu
+
+menu "Platform options"
+
+choice
+	prompt "Xtensa System Type"
+	default XTENSA_PLATFORM_ISS
+
+config XTENSA_PLATFORM_ISS
+	bool "ISS"
+	select XTENSA_CALIBRATE_CCOUNT
+	select SERIAL_CONSOLE
+	help
+	  ISS is an acronym for Tensilica's Instruction Set Simulator.
+
+config XTENSA_PLATFORM_XT2000
+	bool "XT2000"
+	select HAVE_IDE
+	help
+	  XT2000 is the name of Tensilica's feature-rich emulation platform.
+	  This hardware is capable of running a full Linux distribution.
+
+config XTENSA_PLATFORM_XTFPGA
+	bool "XTFPGA"
+	select ETHOC if ETHERNET
+	select PLATFORM_WANT_DEFAULT_MEM
+	select SERIAL_CONSOLE
+	select XTENSA_CALIBRATE_CCOUNT
+	help
+	  XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
+	  This hardware is capable of running a full Linux distribution.
+
+endchoice
+
+
+config XTENSA_CPU_CLOCK
+	int "CPU clock rate [MHz]"
+	depends on !XTENSA_CALIBRATE_CCOUNT
+	default 16
+
+config GENERIC_CALIBRATE_DELAY
+	bool "Auto calibration of the BogoMIPS value"
+	help
+	  The BogoMIPS value can easily be derived from the CPU frequency.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,38400 root=/dev/ram"
+	help
+	  On some architectures (EBSA110 and CATS), there is currently no way
+	  for the boot loader to pass arguments to the kernel. For these
+	  architectures, you should supply some command-line options at build
+	  time by entering them here. As a minimum, you should specify the
+	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+config USE_OF
+	bool "Flattened Device Tree support"
+	select OF
+	select OF_EARLY_FLATTREE
+	help
+	  Include support for flattened device tree machine descriptions.
+
+config BUILTIN_DTB
+	string "DTB to build into the kernel image"
+	depends on OF
+
+config BLK_DEV_SIMDISK
+	tristate "Host file-based simulated block device support"
+	default n
+	depends on XTENSA_PLATFORM_ISS && BLOCK
+	help
+	  Create block devices that map to files in the host file system.
+	  Device binding to host file may be changed at runtime via proc
+	  interface provided the device is not in use.
+
+config BLK_DEV_SIMDISK_COUNT
+	int "Number of host file-based simulated block devices"
+	range 1 10
+	depends on BLK_DEV_SIMDISK
+	default 2
+	help
+	  This is the default minimal number of created block devices.
+	  Kernel/module parameter 'simdisk_count' may be used to change this
+	  value at runtime. More file names (but no more than 10) may be
+	  specified as parameters, simdisk_count grows accordingly.
+
+config SIMDISK0_FILENAME
+	string "Host filename for the first simulated device"
+	depends on BLK_DEV_SIMDISK = y
+	default ""
+	help
+	  Attach a first simdisk to a host file. Conventionally, this file
+	  contains a root file system.
+
+config SIMDISK1_FILENAME
+	string "Host filename for the second simulated device"
+	depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
+	default ""
+	help
+	  Another simulated disk in a host file for a buildroot-independent
+	  storage.
+
+source "mm/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+config PLATFORM_WANT_DEFAULT_MEM
+	def_bool n
+
+config DEFAULT_MEM_START
+	hex "Physical address of the default memory area start"
+	depends on PLATFORM_WANT_DEFAULT_MEM
+	default 0x00000000 if MMU
+	default 0x40000000 if !MMU
+	help
+	  This is a fallback start address of the default memory area, it is
+	  used when no physical memory size is passed through DTB or through
+	  boot parameter from bootloader.
+
+	  In noMMU configuration the following parameters are derived from it:
+	  - kernel load address;
+	  - kernel entry point address;
+	  - relocatable vectors base address;
+	  - uBoot load address;
+	  - TASK_SIZE.
+
+	  If unsure, leave the default value here.
+
+config DEFAULT_MEM_SIZE
+	hex "Maximal size of the default memory area"
+	depends on PLATFORM_WANT_DEFAULT_MEM
+	default 0x04000000
+	help
+	  This is a fallback size of the default memory area, it is used when
+	  no physical memory size is passed through DTB or through boot
+	  parameter from bootloader.
+
+	  It's also used for TASK_SIZE calculation in noMMU configuration.
+
+	  If unsure, leave the default value here.
+
+config XTFPGA_LCD
+	bool "Enable XTFPGA LCD driver"
+	depends on XTENSA_PLATFORM_XTFPGA
+	default n
+	help
+	  There's a 2x16 LCD on most of XTFPGA boards, kernel may output
+	  progress messages there during bootup/shutdown. It may be useful
+	  during board bringup.
+
+	  If unsure, say N.
+
+config XTFPGA_LCD_BASE_ADDR
+	hex "XTFPGA LCD base address"
+	depends on XTFPGA_LCD
+	default "0x0d0c0000"
+	help
+	  Base address of the LCD controller inside KIO region.
+	  Different boards from XTFPGA family have LCD controller at different
+	  addresses. Please consult prototyping user guide for your board for
+	  the correct address. Wrong address here may lead to hardware lockup.
+
+config XTFPGA_LCD_8BIT_ACCESS
+	bool "Use 8-bit access to XTFPGA LCD"
+	depends on XTFPGA_LCD
+	default n
+	help
+	  LCD may be connected with 4- or 8-bit interface, 8-bit access may
+	  only be used with 8-bit interface. Please consult prototyping user
+	  guide for your board for the correct interface width.
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/xtensa/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+