These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

3 files changed, 14 insertions, 717 deletions

diff --git a/kernel/arch/x86/ia32/Makefile b/kernel/arch/x86/ia32/Makefile
index bb635c641..cd4339bae 100644
--- a/kernel/arch/x86/ia32/Makefile
+++ b/kernel/arch/x86/ia32/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the ia32 kernel emulation subsystem.
 #
 
-obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o
+obj-$(CONFIG_IA32_EMULATION) := sys_ia32.o ia32_signal.o
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
diff --git a/kernel/arch/x86/ia32/ia32_signal.c b/kernel/arch/x86/ia32/ia32_signal.c
index c81d35e6c..0552884da 100644
--- a/kernel/arch/x86/ia32/ia32_signal.c
+++ b/kernel/arch/x86/ia32/ia32_signal.c
@@ -21,12 +21,12 @@
 #include <linux/binfmts.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
-#include <asm/i387.h>
-#include <asm/fpu-internal.h>
+#include <asm/fpu/internal.h>
+#include <asm/fpu/signal.h>
 #include <asm/ptrace.h>
 #include <asm/ia32_unistd.h>
 #include <asm/user32.h>
-#include <asm/sigcontext32.h>
+#include <uapi/asm/sigcontext.h>
 #include <asm/proto.h>
 #include <asm/vdso.h>
 #include <asm/sigframe.h>
@@ -34,99 +34,6 @@
 #include <asm/sys_ia32.h>
 #include <asm/smap.h>
 
-int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from)
-{
-	int err = 0;
-	bool ia32 = test_thread_flag(TIF_IA32);
-
-	if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t)))
-		return -EFAULT;
-
-	put_user_try {
-		/* If you change siginfo_t structure, please make sure that
-		   this code is fixed accordingly.
-		   It should never copy any pad contained in the structure
-		   to avoid security leaks, but must copy the generic
-		   3 ints plus the relevant union member.  */
-		put_user_ex(from->si_signo, &to->si_signo);
-		put_user_ex(from->si_errno, &to->si_errno);
-		put_user_ex((short)from->si_code, &to->si_code);
-
-		if (from->si_code < 0) {
-			put_user_ex(from->si_pid, &to->si_pid);
-			put_user_ex(from->si_uid, &to->si_uid);
-			put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr);
-		} else {
-			/*
-			 * First 32bits of unions are always present:
-			 * si_pid === si_band === si_tid === si_addr(LS half)
-			 */
-			put_user_ex(from->_sifields._pad[0],
-					  &to->_sifields._pad[0]);
-			switch (from->si_code >> 16) {
-			case __SI_FAULT >> 16:
-				break;
-			case __SI_SYS >> 16:
-				put_user_ex(from->si_syscall, &to->si_syscall);
-				put_user_ex(from->si_arch, &to->si_arch);
-				break;
-			case __SI_CHLD >> 16:
-				if (ia32) {
-					put_user_ex(from->si_utime, &to->si_utime);
-					put_user_ex(from->si_stime, &to->si_stime);
-				} else {
-					put_user_ex(from->si_utime, &to->_sifields._sigchld_x32._utime);
-					put_user_ex(from->si_stime, &to->_sifields._sigchld_x32._stime);
-				}
-				put_user_ex(from->si_status, &to->si_status);
-				/* FALL THROUGH */
-			default:
-			case __SI_KILL >> 16:
-				put_user_ex(from->si_uid, &to->si_uid);
-				break;
-			case __SI_POLL >> 16:
-				put_user_ex(from->si_fd, &to->si_fd);
-				break;
-			case __SI_TIMER >> 16:
-				put_user_ex(from->si_overrun, &to->si_overrun);
-				put_user_ex(ptr_to_compat(from->si_ptr),
-					    &to->si_ptr);
-				break;
-				 /* This is not generated by the kernel as of now.  */
-			case __SI_RT >> 16:
-			case __SI_MESGQ >> 16:
-				put_user_ex(from->si_uid, &to->si_uid);
-				put_user_ex(from->si_int, &to->si_int);
-				break;
-			}
-		}
-	} put_user_catch(err);
-
-	return err;
-}
-
-int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
-{
-	int err = 0;
-	u32 ptr32;
-
-	if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t)))
-		return -EFAULT;
-
-	get_user_try {
-		get_user_ex(to->si_signo, &from->si_signo);
-		get_user_ex(to->si_errno, &from->si_errno);
-		get_user_ex(to->si_code, &from->si_code);
-
-		get_user_ex(to->si_pid, &from->si_pid);
-		get_user_ex(to->si_uid, &from->si_uid);
-		get_user_ex(ptr32, &from->si_ptr);
-		to->si_ptr = compat_ptr(ptr32);
-	} get_user_catch(err);
-
-	return err;
-}
-
 /*
  * Do a signal return; undo the signal stack.
  */
@@ -161,7 +68,7 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 }
 
 static int ia32_restore_sigcontext(struct pt_regs *regs,
-				   struct sigcontext_ia32 __user *sc)
+				   struct sigcontext_32 __user *sc)
 {
 	unsigned int tmpflags, err = 0;
 	void __user *buf;
@@ -198,7 +105,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 		buf = compat_ptr(tmp);
 	} get_user_catch(err);
 
-	err |= restore_xstate_sig(buf, 1);
+	err |= fpu__restore_sig(buf, 1);
 
 	force_iret();
 
@@ -263,7 +170,7 @@ badframe:
  * Set up a signal frame.
  */
 
-static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc,
+static int ia32_setup_sigcontext(struct sigcontext_32 __user *sc,
 				 void __user *fpstate,
 				 struct pt_regs *regs, unsigned int mask)
 {
@@ -308,6 +215,7 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 				 size_t frame_size,
 				 void __user **fpstate)
 {
+	struct fpu *fpu = &current->thread.fpu;
 	unsigned long sp;
 
 	/* Default to using normal stack */
@@ -322,12 +230,12 @@ static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 		 ksig->ka.sa.sa_restorer)
 		sp = (unsigned long) ksig->ka.sa.sa_restorer;
 
-	if (used_math()) {
+	if (fpu->fpstate_active) {
 		unsigned long fx_aligned, math_size;
 
-		sp = alloc_mathframe(sp, 1, &fx_aligned, &math_size);
-		*fpstate = (struct _fpstate_ia32 __user *) sp;
-		if (save_xstate_sig(*fpstate, (void __user *)fx_aligned,
+		sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size);
+		*fpstate = (struct _fpstate_32 __user *) sp;
+		if (copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned,
 				    math_size) < 0)
 			return (void __user *) -1L;
 	}
@@ -381,7 +289,7 @@ int ia32_setup_frame(int sig, struct ksignal *ksig,
 		/* Return stub is in 32bit vsyscall page */
 		if (current->mm->context.vdso)
 			restorer = current->mm->context.vdso +
-				selected_vdso32->sym___kernel_sigreturn;
+				vdso_image_32.sym___kernel_sigreturn;
 		else
 			restorer = &frame->retcode;
 	}
@@ -460,7 +368,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
 			restorer = ksig->ka.sa.sa_restorer;
 		else
 			restorer = current->mm->context.vdso +
-				selected_vdso32->sym___kernel_rt_sigreturn;
+				vdso_image_32.sym___kernel_rt_sigreturn;
 		put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
 
 		/*
diff --git a/kernel/arch/x86/ia32/ia32entry.S b/kernel/arch/x86/ia32/ia32entry.S
deleted file mode 100644
index 72bf2680f..000000000
--- a/kernel/arch/x86/ia32/ia32entry.S
+++ /dev/null
@@ -1,611 +0,0 @@
-/*
- * Compatibility mode system call entry point for x86-64. 
- * 		
- * Copyright 2000-2002 Andi Kleen, SuSE Labs.
- */		 
-
-#include <asm/dwarf2.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/current.h>
-#include <asm/errno.h>
-#include <asm/ia32_unistd.h>	
-#include <asm/thread_info.h>	
-#include <asm/segment.h>
-#include <asm/irqflags.h>
-#include <asm/asm.h>
-#include <asm/smap.h>
-#include <linux/linkage.h>
-#include <linux/err.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_LE	   0x40000000
-
-#ifndef CONFIG_AUDITSYSCALL
-#define sysexit_audit ia32_ret_from_sys_call
-#define sysretl_audit ia32_ret_from_sys_call
-#endif
-
-	.section .entry.text, "ax"
-
-	/* clobbers %rax */
-	.macro  CLEAR_RREGS _r9=rax
-	xorl 	%eax,%eax
-	movq	%rax,R11(%rsp)
-	movq	%rax,R10(%rsp)
-	movq	%\_r9,R9(%rsp)
-	movq	%rax,R8(%rsp)
-	.endm
-
-	/*
-	 * Reload arg registers from stack in case ptrace changed them.
-	 * We don't reload %eax because syscall_trace_enter() returned
-	 * the %rax value we should see.  Instead, we just truncate that
-	 * value to 32 bits again as we did on entry from user mode.
-	 * If it's a new value set by user_regset during entry tracing,
-	 * this matches the normal truncation of the user-mode value.
-	 * If it's -1 to make us punt the syscall, then (u32)-1 is still
-	 * an appropriately invalid value.
-	 */
-	.macro LOAD_ARGS32 _r9=0
-	.if \_r9
-	movl R9(%rsp),%r9d
-	.endif
-	movl RCX(%rsp),%ecx
-	movl RDX(%rsp),%edx
-	movl RSI(%rsp),%esi
-	movl RDI(%rsp),%edi
-	movl %eax,%eax			/* zero extension */
-	.endm
-	
-	.macro CFI_STARTPROC32 simple
-	CFI_STARTPROC	\simple
-	CFI_UNDEFINED	r8
-	CFI_UNDEFINED	r9
-	CFI_UNDEFINED	r10
-	CFI_UNDEFINED	r11
-	CFI_UNDEFINED	r12
-	CFI_UNDEFINED	r13
-	CFI_UNDEFINED	r14
-	CFI_UNDEFINED	r15
-	.endm
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret32)
-	swapgs
-	sysretl
-ENDPROC(native_usergs_sysret32)
-
-ENTRY(native_irq_enable_sysexit)
-	swapgs
-	sti
-	sysexit
-ENDPROC(native_irq_enable_sysexit)
-#endif
-
-/*
- * 32bit SYSENTER instruction entry.
- *
- * SYSENTER loads ss, rsp, cs, and rip from previously programmed MSRs.
- * IF and VM in rflags are cleared (IOW: interrupts are off).
- * SYSENTER does not save anything on the stack,
- * and does not save old rip (!!!) and rflags.
- *
- * Arguments:
- * eax  system call number
- * ebx  arg1
- * ecx  arg2
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * ebp  user stack
- * 0(%ebp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
- */
-ENTRY(ia32_sysenter_target)
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,0
-	CFI_REGISTER	rsp,rbp
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	SWAPGS_UNSAFE_STACK
-	movq	PER_CPU_VAR(cpu_tss + TSS_sp0), %rsp
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%ebp, %ebp
-	movl	%eax, %eax
-
-	movl	ASM_THREAD_INFO(TI_sysenter_return, %rsp, 0), %r10d
-	CFI_REGISTER rip,r10
-
-	/* Construct struct pt_regs on stack */
-	pushq_cfi	$__USER32_DS		/* pt_regs->ss */
-	pushq_cfi	%rbp			/* pt_regs->sp */
-	CFI_REL_OFFSET	rsp,0
-	pushfq_cfi				/* pt_regs->flags */
-	pushq_cfi	$__USER32_CS		/* pt_regs->cs */
-	pushq_cfi	%r10 /* pt_regs->ip = thread_info->sysenter_return */
-	CFI_REL_OFFSET	rip,0
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rcx			/* pt_regs->cx */
-	pushq_cfi_reg	rax			/* pt_regs->ax */
-	cld
-	sub	$(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 10*8
-
-	/*
-	 * no need to do an access_ok check here because rbp has been
-	 * 32bit zero extended
-	 */
-	ASM_STAC
-1:	movl	(%rbp),%ebp
-	_ASM_EXTABLE(1b,ia32_badarg)
-	ASM_CLAC
-
-	/*
-	 * Sysenter doesn't filter flags, so we need to clear NT
-	 * ourselves.  To save a few cycles, we can check whether
-	 * NT was set instead of doing an unconditional popfq.
-	 */
-	testl $X86_EFLAGS_NT,EFLAGS(%rsp)
-	jnz sysenter_fix_flags
-sysenter_flags_fixed:
-
-	orl     $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	testl   $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	CFI_REMEMBER_STATE
-	jnz  sysenter_tracesys
-	cmpq	$(IA32_NR_syscalls-1),%rax
-	ja	ia32_badsys
-sysenter_do_call:
-	/* 32bit syscall -> 64bit C ABI argument conversion */
-	movl	%edi,%r8d	/* arg5 */
-	movl	%ebp,%r9d	/* arg6 */
-	xchg	%ecx,%esi	/* rsi:arg2, rcx:arg4 */
-	movl	%ebx,%edi	/* arg1 */
-	movl	%edx,%edx	/* arg3 (zero extension) */
-sysenter_dispatch:
-	call	*ia32_sys_call_table(,%rax,8)
-	movq	%rax,RAX(%rsp)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl	$_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz	sysexit_audit
-sysexit_from_sys_call:
-	/*
-	 * NB: SYSEXIT is not obviously safe for 64-bit kernels -- an
-	 * NMI between STI and SYSEXIT has poorly specified behavior,
-	 * and and NMI followed by an IRQ with usergs is fatal.  So
-	 * we just pretend we're using SYSEXIT but we really use
-	 * SYSRETL instead.
-	 *
-	 * This code path is still called 'sysexit' because it pairs
-	 * with 'sysenter' and it uses the SYSENTER calling convention.
-	 */
-	andl    $~TS_COMPAT,ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	movl	RIP(%rsp),%ecx		/* User %eip */
-	CFI_REGISTER rip,rcx
-	RESTORE_RSI_RDI
-	xorl	%edx,%edx		/* avoid info leaks */
-	xorq	%r8,%r8
-	xorq	%r9,%r9
-	xorq	%r10,%r10
-	movl	EFLAGS(%rsp),%r11d	/* User eflags */
-	/*CFI_RESTORE rflags*/
-	TRACE_IRQS_ON
-
-	/*
-	 * SYSRETL works even on Intel CPUs.  Use it in preference to SYSEXIT,
-	 * since it avoids a dicey window with interrupts enabled.
-	 */
-	movl	RSP(%rsp),%esp
-
-	/*
-	 * USERGS_SYSRET32 does:
-	 *  gsbase = user's gs base
-	 *  eip = ecx
-	 *  rflags = r11
-	 *  cs = __USER32_CS
-	 *  ss = __USER_DS
-	 *
-	 * The prologue set RIP(%rsp) to VDSO32_SYSENTER_RETURN, which does:
-	 *
-	 *  pop %ebp
-	 *  pop %edx
-	 *  pop %ecx
-	 *
-	 * Therefore, we invoke SYSRETL with EDX and R8-R10 zeroed to
-	 * avoid info leaks.  R11 ends up with VDSO32_SYSENTER_RETURN's
-	 * address (already known to user code), and R12-R15 are
-	 * callee-saved and therefore don't contain any interesting
-	 * kernel data.
-	 */
-	USERGS_SYSRET32
-
-	CFI_RESTORE_STATE
-
-#ifdef CONFIG_AUDITSYSCALL
-	.macro auditsys_entry_common
-	movl %esi,%r8d			/* 5th arg: 4th syscall arg */
-	movl %ecx,%r9d			/*swap with edx*/
-	movl %edx,%ecx			/* 4th arg: 3rd syscall arg */
-	movl %r9d,%edx			/* 3rd arg: 2nd syscall arg */
-	movl %ebx,%esi			/* 2nd arg: 1st syscall arg */
-	movl %eax,%edi			/* 1st arg: syscall number */
-	call __audit_syscall_entry
-	movl RAX(%rsp),%eax	/* reload syscall number */
-	cmpq $(IA32_NR_syscalls-1),%rax
-	ja ia32_badsys
-	movl %ebx,%edi			/* reload 1st syscall arg */
-	movl RCX(%rsp),%esi	/* reload 2nd syscall arg */
-	movl RDX(%rsp),%edx	/* reload 3rd syscall arg */
-	movl RSI(%rsp),%ecx	/* reload 4th syscall arg */
-	movl RDI(%rsp),%r8d	/* reload 5th syscall arg */
-	.endm
-
-	.macro auditsys_exit exit
-	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz ia32_ret_from_sys_call
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	movl %eax,%esi		/* second arg, syscall return value */
-	cmpl $-MAX_ERRNO,%eax	/* is it an error ? */
-	jbe 1f
-	movslq %eax, %rsi	/* if error sign extend to 64 bits */
-1:	setbe %al		/* 1 if error, 0 if not */
-	movzbl %al,%edi		/* zero-extend that into %edi */
-	call __audit_syscall_exit
-	movq RAX(%rsp),%rax	/* reload syscall return value */
-	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl %edi, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jz \exit
-	CLEAR_RREGS
-	jmp int_with_check
-	.endm
-
-sysenter_auditsys:
-	auditsys_entry_common
-	movl %ebp,%r9d			/* reload 6th syscall arg */
-	jmp sysenter_dispatch
-
-sysexit_audit:
-	auditsys_exit sysexit_from_sys_call
-#endif
-
-sysenter_fix_flags:
-	pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED)
-	popfq_cfi
-	jmp sysenter_flags_fixed
-
-sysenter_tracesys:
-#ifdef CONFIG_AUDITSYSCALL
-	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jz	sysenter_auditsys
-#endif
-	SAVE_EXTRA_REGS
-	CLEAR_RREGS
-	movq	$-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
-	movq	%rsp,%rdi        /* &pt_regs -> arg1 */
-	call	syscall_trace_enter
-	LOAD_ARGS32  /* reload args from stack in case ptrace changed it */
-	RESTORE_EXTRA_REGS
-	cmpq	$(IA32_NR_syscalls-1),%rax
-	ja	int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
-	jmp	sysenter_do_call
-	CFI_ENDPROC
-ENDPROC(ia32_sysenter_target)
-
-/*
- * 32bit SYSCALL instruction entry.
- *
- * 32bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
- *
- * Note: rflags saving+masking-with-MSR happens only in Long mode
- * (in legacy 32bit mode, IF, RF and VM bits are cleared and that's it).
- * Don't get confused: rflags saving+masking depends on Long Mode Active bit
- * (EFER.LMA=1), NOT on bitness of userspace where SYSCALL executes
- * or target CS descriptor's L bit (SYSCALL does not read segment descriptors).
- *
- * Arguments:
- * eax  system call number
- * ecx  return address
- * ebx  arg1
- * ebp  arg2	(note: not saved in the stack frame, should not be touched)
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * esp  user stack
- * 0(%esp) arg6
- *
- * This is purely a fast path. For anything complicated we use the int 0x80
- * path below. We set up a complete hardware stack frame to share code
- * with the int 0x80 path.
- */
-ENTRY(ia32_cstar_target)
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,0
-	CFI_REGISTER	rip,rcx
-	/*CFI_REGISTER	rflags,r11*/
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	SWAPGS_UNSAFE_STACK
-	movl	%esp,%r8d
-	CFI_REGISTER	rsp,r8
-	movq	PER_CPU_VAR(kernel_stack),%rsp
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%eax,%eax
-
-	/* Construct struct pt_regs on stack */
-	pushq_cfi	$__USER32_DS		/* pt_regs->ss */
-	pushq_cfi	%r8			/* pt_regs->sp */
-	CFI_REL_OFFSET rsp,0
-	pushq_cfi	%r11			/* pt_regs->flags */
-	pushq_cfi	$__USER32_CS		/* pt_regs->cs */
-	pushq_cfi	%rcx			/* pt_regs->ip */
-	CFI_REL_OFFSET rip,0
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rbp			/* pt_regs->cx */
-	movl	%ebp,%ecx
-	pushq_cfi_reg	rax			/* pt_regs->ax */
-	sub	$(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 10*8
-
-	/*
-	 * no need to do an access_ok check here because r8 has been
-	 * 32bit zero extended
-	 */
-	ASM_STAC
-1:	movl	(%r8),%r9d
-	_ASM_EXTABLE(1b,ia32_badarg)
-	ASM_CLAC
-	orl     $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	testl   $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	CFI_REMEMBER_STATE
-	jnz   cstar_tracesys
-	cmpq $IA32_NR_syscalls-1,%rax
-	ja  ia32_badsys
-cstar_do_call:
-	/* 32bit syscall -> 64bit C ABI argument conversion */
-	movl	%edi,%r8d	/* arg5 */
-	/* r9 already loaded */	/* arg6 */
-	xchg	%ecx,%esi	/* rsi:arg2, rcx:arg4 */
-	movl	%ebx,%edi	/* arg1 */
-	movl	%edx,%edx	/* arg3 (zero extension) */
-cstar_dispatch:
-	call *ia32_sys_call_table(,%rax,8)
-	movq %rax,RAX(%rsp)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz sysretl_audit
-sysretl_from_sys_call:
-	andl $~TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	RESTORE_RSI_RDI_RDX
-	movl RIP(%rsp),%ecx
-	CFI_REGISTER rip,rcx
-	movl EFLAGS(%rsp),%r11d
-	/*CFI_REGISTER rflags,r11*/
-	xorq	%r10,%r10
-	xorq	%r9,%r9
-	xorq	%r8,%r8
-	TRACE_IRQS_ON
-	movl RSP(%rsp),%esp
-	CFI_RESTORE rsp
-	/*
-	 * 64bit->32bit SYSRET restores eip from ecx,
-	 * eflags from r11 (but RF and VM bits are forced to 0),
-	 * cs and ss are loaded from MSRs.
-	 * (Note: 32bit->32bit SYSRET is different: since r11
-	 * does not exist, it merely sets eflags.IF=1).
-	 *
-	 * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
-	 * descriptor is not reinitialized.  This means that we must
-	 * avoid SYSRET with SS == NULL, which could happen if we schedule,
-	 * exit the kernel, and re-enter using an interrupt vector.  (All
-	 * interrupt entries on x86_64 set SS to NULL.)  We prevent that
-	 * from happening by reloading SS in __switch_to.
-	 */
-	USERGS_SYSRET32
-
-#ifdef CONFIG_AUDITSYSCALL
-cstar_auditsys:
-	CFI_RESTORE_STATE
-	movl %r9d,R9(%rsp)	/* register to be clobbered by call */
-	auditsys_entry_common
-	movl R9(%rsp),%r9d	/* reload 6th syscall arg */
-	jmp cstar_dispatch
-
-sysretl_audit:
-	auditsys_exit sysretl_from_sys_call
-#endif
-
-cstar_tracesys:
-#ifdef CONFIG_AUDITSYSCALL
-	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT), ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jz cstar_auditsys
-#endif
-	xchgl %r9d,%ebp
-	SAVE_EXTRA_REGS
-	CLEAR_RREGS r9
-	movq $-ENOSYS,RAX(%rsp)	/* ptrace can change this for a bad syscall */
-	movq %rsp,%rdi        /* &pt_regs -> arg1 */
-	call syscall_trace_enter
-	LOAD_ARGS32 1	/* reload args from stack in case ptrace changed it */
-	RESTORE_EXTRA_REGS
-	xchgl %ebp,%r9d
-	cmpq $(IA32_NR_syscalls-1),%rax
-	ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
-	jmp cstar_do_call
-END(ia32_cstar_target)
-				
-ia32_badarg:
-	ASM_CLAC
-	movq $-EFAULT,%rax
-	jmp ia32_sysret
-	CFI_ENDPROC
-
-/*
- * Emulated IA32 system calls via int 0x80.
- *
- * Arguments:
- * eax  system call number
- * ebx  arg1
- * ecx  arg2
- * edx  arg3
- * esi  arg4
- * edi  arg5
- * ebp  arg6	(note: not saved in the stack frame, should not be touched)
- *
- * Notes:
- * Uses the same stack frame as the x86-64 version.
- * All registers except eax must be saved (but ptrace may violate that).
- * Arguments are zero extended. For system calls that want sign extension and
- * take long arguments a wrapper is needed. Most calls can just be called
- * directly.
- * Assumes it is only called from user space and entered with interrupts off.
- */
-
-ENTRY(ia32_syscall)
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,5*8
-	/*CFI_REL_OFFSET	ss,4*8 */
-	CFI_REL_OFFSET	rsp,3*8
-	/*CFI_REL_OFFSET	rflags,2*8 */
-	/*CFI_REL_OFFSET	cs,1*8 */
-	CFI_REL_OFFSET	rip,0*8
-
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	SWAPGS
-	ENABLE_INTERRUPTS(CLBR_NONE)
-
-	/* Zero-extending 32-bit regs, do not remove */
-	movl	%eax,%eax
-
-	/* Construct struct pt_regs on stack (iret frame is already on stack) */
-	pushq_cfi_reg	rax			/* pt_regs->orig_ax */
-	pushq_cfi_reg	rdi			/* pt_regs->di */
-	pushq_cfi_reg	rsi			/* pt_regs->si */
-	pushq_cfi_reg	rdx			/* pt_regs->dx */
-	pushq_cfi_reg	rcx			/* pt_regs->cx */
-	pushq_cfi_reg	rax			/* pt_regs->ax */
-	cld
-	sub	$(10*8),%rsp /* pt_regs->r8-11,bp,bx,r12-15 not saved */
-	CFI_ADJUST_CFA_OFFSET 10*8
-
-	orl $TS_COMPAT, ASM_THREAD_INFO(TI_status, %rsp, SIZEOF_PTREGS)
-	testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz ia32_tracesys
-	cmpq $(IA32_NR_syscalls-1),%rax
-	ja ia32_badsys
-ia32_do_call:
-	/* 32bit syscall -> 64bit C ABI argument conversion */
-	movl %edi,%r8d	/* arg5 */
-	movl %ebp,%r9d	/* arg6 */
-	xchg %ecx,%esi	/* rsi:arg2, rcx:arg4 */
-	movl %ebx,%edi	/* arg1 */
-	movl %edx,%edx	/* arg3 (zero extension) */
-	call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
-ia32_sysret:
-	movq %rax,RAX(%rsp)
-ia32_ret_from_sys_call:
-	CLEAR_RREGS
-	jmp int_ret_from_sys_call
-
-ia32_tracesys:
-	SAVE_EXTRA_REGS
-	CLEAR_RREGS
-	movq $-ENOSYS,RAX(%rsp)	/* ptrace can change this for a bad syscall */
-	movq %rsp,%rdi        /* &pt_regs -> arg1 */
-	call syscall_trace_enter
-	LOAD_ARGS32	/* reload args from stack in case ptrace changed it */
-	RESTORE_EXTRA_REGS
-	cmpq $(IA32_NR_syscalls-1),%rax
-	ja  int_ret_from_sys_call	/* ia32_tracesys has set RAX(%rsp) */
-	jmp ia32_do_call
-END(ia32_syscall)
-
-ia32_badsys:
-	movq $0,ORIG_RAX(%rsp)
-	movq $-ENOSYS,%rax
-	jmp ia32_sysret
-
-	CFI_ENDPROC
-	
-	.macro PTREGSCALL label, func
-	ALIGN
-GLOBAL(\label)
-	leaq \func(%rip),%rax
-	jmp  ia32_ptregs_common	
-	.endm
-
-	CFI_STARTPROC32
-
-	PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn
-	PTREGSCALL stub32_sigreturn, sys32_sigreturn
-	PTREGSCALL stub32_fork, sys_fork
-	PTREGSCALL stub32_vfork, sys_vfork
-
-	ALIGN
-GLOBAL(stub32_clone)
-	leaq sys_clone(%rip),%rax
-	mov	%r8, %rcx
-	jmp  ia32_ptregs_common	
-
-	ALIGN
-ia32_ptregs_common:
-	CFI_ENDPROC
-	CFI_STARTPROC32	simple
-	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA	rsp,SIZEOF_PTREGS
-	CFI_REL_OFFSET	rax,RAX
-	CFI_REL_OFFSET	rcx,RCX
-	CFI_REL_OFFSET	rdx,RDX
-	CFI_REL_OFFSET	rsi,RSI
-	CFI_REL_OFFSET	rdi,RDI
-	CFI_REL_OFFSET	rip,RIP
-/*	CFI_REL_OFFSET	cs,CS*/
-/*	CFI_REL_OFFSET	rflags,EFLAGS*/
-	CFI_REL_OFFSET	rsp,RSP
-/*	CFI_REL_OFFSET	ss,SS*/
-	SAVE_EXTRA_REGS 8
-	call *%rax
-	RESTORE_EXTRA_REGS 8
-	ret
-	CFI_ENDPROC
-END(ia32_ptregs_common)