diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/arch/x86/boot/compressed/head_64.S | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/arch/x86/boot/compressed/head_64.S')
-rw-r--r-- | kernel/arch/x86/boot/compressed/head_64.S | 480 |
1 files changed, 480 insertions, 0 deletions
diff --git a/kernel/arch/x86/boot/compressed/head_64.S b/kernel/arch/x86/boot/compressed/head_64.S new file mode 100644 index 000000000..b0c0d16ef --- /dev/null +++ b/kernel/arch/x86/boot/compressed/head_64.S @@ -0,0 +1,480 @@ +/* + * linux/boot/head.S + * + * Copyright (C) 1991, 1992, 1993 Linus Torvalds + */ + +/* + * head.S contains the 32-bit startup code. + * + * NOTE!!! Startup happens at absolute address 0x00001000, which is also where + * the page directory will exist. The startup code will be overwritten by + * the page directory. [According to comments etc elsewhere on a compressed + * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] + * + * Page 0 is deliberately kept safe, since System Management Mode code in + * laptops may need to access the BIOS data stored there. This is also + * useful for future device drivers that either access the BIOS via VM86 + * mode. + */ + +/* + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + */ + .code32 + .text + +#include <linux/init.h> +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/boot.h> +#include <asm/msr.h> +#include <asm/processor-flags.h> +#include <asm/asm-offsets.h> +#include <asm/bootparam.h> + + __HEAD + .code32 +ENTRY(startup_32) + /* + * 32bit entry is 0 and it is ABI so immutable! + * If we come here directly from a bootloader, + * kernel(text+data+bss+brk) ramdisk, zero_page, command line + * all need to be under the 4G limit. + */ + cld + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ + testb $KEEP_SEGMENTS, BP_loadflags(%esi) + jnz 1f + + cli + movl $(__BOOT_DS), %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss +1: + +/* + * Calculate the delta between where we were compiled to run + * at and where we were actually loaded at. This can only be done + * with a short local call on x86. Nothing else will tell us what + * address we are running at. The reserved chunk of the real-mode + * data at 0x1e4 (defined as a scratch field) are used as the stack + * for this calculation. Only 4 bytes are needed. + */ + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp + +/* setup a stack and make sure cpu supports long mode. */ + movl $boot_stack_end, %eax + addl %ebp, %eax + movl %eax, %esp + + call verify_cpu + testl %eax, %eax + jnz no_longmode + +/* + * Compute the delta between where we were compiled to run at + * and where the code will actually run at. + * + * %ebp contains the address we are loaded at by the boot loader and %ebx + * contains the address where we should move the kernel image temporarily + * for safe in-place decompression. + */ + +#ifdef CONFIG_RELOCATABLE + movl %ebp, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx + cmpl $LOAD_PHYSICAL_ADDR, %ebx + jge 1f +#endif + movl $LOAD_PHYSICAL_ADDR, %ebx +1: + + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx + +/* + * Prepare for entering 64 bit mode + */ + + /* Load new GDT with the 64bit segments using 32bit descriptor */ + leal gdt(%ebp), %eax + movl %eax, gdt+2(%ebp) + lgdt gdt(%ebp) + + /* Enable PAE mode */ + movl %cr4, %eax + orl $X86_CR4_PAE, %eax + movl %eax, %cr4 + + /* + * Build early 4G boot pagetable + */ + /* Initialize Page tables to 0 */ + leal pgtable(%ebx), %edi + xorl %eax, %eax + movl $((4096*6)/4), %ecx + rep stosl + + /* Build Level 4 */ + leal pgtable + 0(%ebx), %edi + leal 0x1007 (%edi), %eax + movl %eax, 0(%edi) + + /* Build Level 3 */ + leal pgtable + 0x1000(%ebx), %edi + leal 0x1007(%edi), %eax + movl $4, %ecx +1: movl %eax, 0x00(%edi) + addl $0x00001000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Build Level 2 */ + leal pgtable + 0x2000(%ebx), %edi + movl $0x00000183, %eax + movl $2048, %ecx +1: movl %eax, 0(%edi) + addl $0x00200000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Enable the boot page tables */ + leal pgtable(%ebx), %eax + movl %eax, %cr3 + + /* Enable Long mode in EFER (Extended Feature Enable Register) */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + /* After gdt is loaded */ + xorl %eax, %eax + lldt %ax + movl $__BOOT_TSS, %eax + ltr %ax + + /* + * Setup for the jump to 64bit mode + * + * When the jump is performend we will be in long mode but + * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 + * (and in turn EFER.LMA = 1). To jump into 64bit mode we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + * We place all of the values on our mini stack so lret can + * used to perform that far jump. + */ + pushl $__KERNEL_CS + leal startup_64(%ebp), %eax +#ifdef CONFIG_EFI_MIXED + movl efi32_config(%ebp), %ebx + cmp $0, %ebx + jz 1f + leal handover_entry(%ebp), %eax +1: +#endif + pushl %eax + + /* Enter paged protected Mode, activating Long Mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ + movl %eax, %cr0 + + /* Jump from 32bit compatibility mode into 64bit mode. */ + lret +ENDPROC(startup_32) + +#ifdef CONFIG_EFI_MIXED + .org 0x190 +ENTRY(efi32_stub_entry) + add $0x4, %esp /* Discard return address */ + popl %ecx + popl %edx + popl %esi + + leal (BP_scratch+4)(%esi), %esp + call 1f +1: pop %ebp + subl $1b, %ebp + + movl %ecx, efi32_config(%ebp) + movl %edx, efi32_config+8(%ebp) + sgdtl efi32_boot_gdt(%ebp) + + leal efi32_config(%ebp), %eax + movl %eax, efi_config(%ebp) + + jmp startup_32 +ENDPROC(efi32_stub_entry) +#endif + + .code64 + .org 0x200 +ENTRY(startup_64) + /* + * 64bit entry is 0x200 and it is ABI so immutable! + * We come here either from startup_32 or directly from a + * 64bit bootloader. + * If we come here from a bootloader, kernel(text+data+bss+brk), + * ramdisk, zero_page, command line could be above 4G. + * We depend on an identity mapped page table being provided + * that maps our entire kernel(text+data+bss+brk), zero page + * and command line. + */ +#ifdef CONFIG_EFI_STUB + /* + * The entry point for the PE/COFF executable is efi_pe_entry, so + * only legacy boot loaders will execute this jmp. + */ + jmp preferred_addr + +ENTRY(efi_pe_entry) + movq %rcx, efi64_config(%rip) /* Handle */ + movq %rdx, efi64_config+8(%rip) /* EFI System table pointer */ + + leaq efi64_config(%rip), %rax + movq %rax, efi_config(%rip) + + call 1f +1: popq %rbp + subq $1b, %rbp + + /* + * Relocate efi_config->call(). + */ + addq %rbp, efi64_config+88(%rip) + + movq %rax, %rdi + call make_boot_params + cmpq $0,%rax + je fail + mov %rax, %rsi + leaq startup_32(%rip), %rax + movl %eax, BP_code32_start(%rsi) + jmp 2f /* Skip the relocation */ + +handover_entry: + call 1f +1: popq %rbp + subq $1b, %rbp + + /* + * Relocate efi_config->call(). + */ + movq efi_config(%rip), %rax + addq %rbp, 88(%rax) +2: + movq efi_config(%rip), %rdi + call efi_main + movq %rax,%rsi + cmpq $0,%rax + jne 2f +fail: + /* EFI init failed, so hang. */ + hlt + jmp fail +2: + movl BP_code32_start(%esi), %eax + leaq preferred_addr(%rax), %rax + jmp *%rax + +preferred_addr: +#endif + + /* Setup data segments. */ + xorl %eax, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss + movl %eax, %fs + movl %eax, %gs + + /* + * Compute the decompressed kernel start address. It is where + * we were loaded at aligned to a 2M boundary. %rbp contains the + * decompressed kernel start address. + * + * If it is a relocatable kernel then decompress and run the kernel + * from load address aligned to 2MB addr, otherwise decompress and + * run the kernel from LOAD_PHYSICAL_ADDR + * + * We cannot rely on the calculation done in 32-bit mode, since we + * may have been invoked via the 64-bit entry point. + */ + + /* Start with the delta to where the kernel will run at. */ +#ifdef CONFIG_RELOCATABLE + leaq startup_32(%rip) /* - $startup_32 */, %rbp + movl BP_kernel_alignment(%rsi), %eax + decl %eax + addq %rax, %rbp + notq %rax + andq %rax, %rbp + cmpq $LOAD_PHYSICAL_ADDR, %rbp + jge 1f +#endif + movq $LOAD_PHYSICAL_ADDR, %rbp +1: + + /* Target address to relocate to for decompression */ + leaq z_extract_offset(%rbp), %rbx + + /* Set up the stack */ + leaq boot_stack_end(%rbx), %rsp + + /* Zero EFLAGS */ + pushq $0 + popfq + +/* + * Copy the compressed kernel to the end of our buffer + * where decompression in place becomes safe. + */ + pushq %rsi + leaq (_bss-8)(%rip), %rsi + leaq (_bss-8)(%rbx), %rdi + movq $_bss /* - $startup_32 */, %rcx + shrq $3, %rcx + std + rep movsq + cld + popq %rsi + +/* + * Jump to the relocated address. + */ + leaq relocated(%rbx), %rax + jmp *%rax + +#ifdef CONFIG_EFI_STUB + .org 0x390 +ENTRY(efi64_stub_entry) + movq %rdi, efi64_config(%rip) /* Handle */ + movq %rsi, efi64_config+8(%rip) /* EFI System table pointer */ + + leaq efi64_config(%rip), %rax + movq %rax, efi_config(%rip) + + movq %rdx, %rsi + jmp handover_entry +ENDPROC(efi64_stub_entry) +#endif + + .text +relocated: + +/* + * Clear BSS (stack is currently empty) + */ + xorl %eax, %eax + leaq _bss(%rip), %rdi + leaq _ebss(%rip), %rcx + subq %rdi, %rcx + shrq $3, %rcx + rep stosq + +/* + * Adjust our own GOT + */ + leaq _got(%rip), %rdx + leaq _egot(%rip), %rcx +1: + cmpq %rcx, %rdx + jae 2f + addq %rbx, (%rdx) + addq $8, %rdx + jmp 1b +2: + +/* + * Do the decompression, and jump to the new kernel.. + */ + pushq %rsi /* Save the real mode argument */ + movq $z_run_size, %r9 /* size of kernel with .bss and .brk */ + pushq %r9 + movq %rsi, %rdi /* real mode address */ + leaq boot_heap(%rip), %rsi /* malloc area for uncompression */ + leaq input_data(%rip), %rdx /* input_data */ + movl $z_input_len, %ecx /* input_len */ + movq %rbp, %r8 /* output target address */ + movq $z_output_len, %r9 /* decompressed length, end of relocs */ + call decompress_kernel /* returns kernel location in %rax */ + popq %r9 + popq %rsi + +/* + * Jump to the decompressed kernel. + */ + jmp *%rax + + .code32 +no_longmode: + /* This isn't an x86-64 CPU so hang */ +1: + hlt + jmp 1b + +#include "../../kernel/verify_cpu.S" + + .data +gdt: + .word gdt_end - gdt + .long gdt + .word 0 + .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00af9a000000ffff /* __KERNEL_CS */ + .quad 0x00cf92000000ffff /* __KERNEL_DS */ + .quad 0x0080890000000000 /* TS descriptor */ + .quad 0x0000000000000000 /* TS continued */ +gdt_end: + +#ifdef CONFIG_EFI_STUB +efi_config: + .quad 0 + +#ifdef CONFIG_EFI_MIXED + .global efi32_config +efi32_config: + .fill 11,8,0 + .quad efi64_thunk + .byte 0 +#endif + + .global efi64_config +efi64_config: + .fill 11,8,0 + .quad efi_call + .byte 1 +#endif /* CONFIG_EFI_STUB */ + +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 +boot_heap: + .fill BOOT_HEAP_SIZE, 1, 0 +boot_stack: + .fill BOOT_STACK_SIZE, 1, 0 +boot_stack_end: + +/* + * Space for page tables (not in .bss so not zeroed) + */ + .section ".pgtable","a",@nobits + .balign 4096 +pgtable: + .fill 6*4096, 1, 0 |