Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 81 insertions, 0 deletions

diff --git a/kernel/arch/tile/include/asm/irq.h b/kernel/arch/tile/include/asm/irq.h
new file mode 100644
index 000000000..1fe869118
--- /dev/null
+++ b/kernel/arch/tile/include/asm/irq.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#ifndef _ASM_TILE_IRQ_H
+#define _ASM_TILE_IRQ_H
+
+#include <linux/hardirq.h>
+
+/* The hypervisor interface provides 32 IRQs. */
+#define NR_IRQS			32
+
+/* IRQ numbers used for linux IPIs. */
+#define IRQ_RESCHEDULE	0
+/* Interrupts for dynamic allocation start at 1. Let the core allocate irq0 */
+#define NR_IRQS_LEGACY	1
+
+#define irq_canonicalize(irq)   (irq)
+
+void ack_bad_irq(unsigned int irq);
+
+/*
+ * Different ways of handling interrupts.  Tile interrupts are always
+ * per-cpu; there is no global interrupt controller to implement
+ * enable/disable.  Most onboard devices can send their interrupts to
+ * many tiles at the same time, and Tile-specific drivers know how to
+ * deal with this.
+ *
+ * However, generic devices (usually PCIE based, sometimes GPIO)
+ * expect that interrupts will fire on a single core at a time and
+ * that the irq can be enabled or disabled from any core at any time.
+ * We implement this by directing such interrupts to a single core.
+ *
+ * One added wrinkle is that PCI interrupts can be either
+ * hardware-cleared (legacy interrupts) or software cleared (MSI).
+ * Other generic device systems (GPIO) are always software-cleared.
+ *
+ * The enums below are used by drivers for onboard devices, including
+ * the internals of PCI root complex and GPIO.  They allow the driver
+ * to tell the generic irq code what kind of interrupt is mapped to a
+ * particular IRQ number.
+ */
+enum {
+	/* per-cpu interrupt; use enable/disable_percpu_irq() to mask */
+	TILE_IRQ_PERCPU,
+	/* global interrupt, hardware responsible for clearing. */
+	TILE_IRQ_HW_CLEAR,
+	/* global interrupt, software responsible for clearing. */
+	TILE_IRQ_SW_CLEAR,
+};
+
+
+/*
+ * Paravirtualized drivers should call this when they dynamically
+ * allocate a new IRQ or discover an IRQ that was pre-allocated by the
+ * hypervisor for use with their particular device.  This gives the
+ * IRQ subsystem an opportunity to do interrupt-type-specific
+ * initialization.
+ *
+ * ISSUE: We should modify this API so that registering anything
+ * except percpu interrupts also requires providing callback methods
+ * for enabling and disabling the interrupt.  This would allow the
+ * generic IRQ code to proxy enable/disable_irq() calls back into the
+ * PCI subsystem, which in turn could enable or disable the interrupt
+ * at the PCI shim.
+ */
+void tile_irq_activate(unsigned int irq, int tile_irq_type);
+
+void setup_irq_regs(void);
+
+#endif /* _ASM_TILE_IRQ_H */