Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 143 insertions, 0 deletions

diff --git a/kernel/arch/sparc/include/asm/dma.h b/kernel/arch/sparc/include/asm/dma.h
new file mode 100644
index 000000000..3d434ef5e
--- /dev/null
+++ b/kernel/arch/sparc/include/asm/dma.h
@@ -0,0 +1,143 @@
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#ifdef CONFIG_SPARC32
+
+/* Routines for data transfer buffers. */
+struct device;
+struct scatterlist;
+
+struct sparc32_dma_ops {
+	__u32 (*get_scsi_one)(struct device *, char *, unsigned long);
+	void (*get_scsi_sgl)(struct device *, struct scatterlist *, int);
+	void (*release_scsi_one)(struct device *, __u32, unsigned long);
+	void (*release_scsi_sgl)(struct device *, struct scatterlist *,int);
+#ifdef CONFIG_SBUS
+	int (*map_dma_area)(struct device *, dma_addr_t *, unsigned long, unsigned long, int);
+	void (*unmap_dma_area)(struct device *, unsigned long, int);
+#endif
+};
+extern const struct sparc32_dma_ops *sparc32_dma_ops;
+
+#define mmu_get_scsi_one(dev,vaddr,len) \
+	sparc32_dma_ops->get_scsi_one(dev, vaddr, len)
+#define mmu_get_scsi_sgl(dev,sg,sz) \
+	sparc32_dma_ops->get_scsi_sgl(dev, sg, sz)
+#define mmu_release_scsi_one(dev,vaddr,len) \
+	sparc32_dma_ops->release_scsi_one(dev, vaddr,len)
+#define mmu_release_scsi_sgl(dev,sg,sz) \
+	sparc32_dma_ops->release_scsi_sgl(dev, sg, sz)
+
+#ifdef CONFIG_SBUS
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+#define sbus_map_dma_area(dev,pba,va,a,len) \
+	sparc32_dma_ops->map_dma_area(dev, pba, va, a, len)
+#define sbus_unmap_dma_area(dev,ba,len) \
+	sparc32_dma_ops->unmap_dma_area(dev, ba, len)
+#endif /* CONFIG_SBUS */
+
+#endif
+
+#endif /* !(_ASM_SPARC_DMA_H) */