Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

16 files changed, 1021 insertions, 0 deletions

diff --git a/kernel/arch/sh/include/mach-common/mach/highlander.h b/kernel/arch/sh/include/mach-common/mach/highlander.h
new file mode 100644
index 000000000..6ce944e33
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/highlander.h
@@ -0,0 +1,207 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses.  */
+#define PA_NORFLASH_ADDR	0x00000000
+#define PA_NORFLASH_SIZE	0x04000000
+
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extension Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF		(-1)
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extension Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
+#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
+#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
+#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
+#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+
+#define IVDR_CK_ON	4		/* iVDR Clock ON */
+#endif
+
+#define HL_FPGA_IRQ_BASE	200
+#define HL_NR_IRL		15
+
+#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
+#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
+#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
+#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
+#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
+#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
+#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
+#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
+#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
+#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
+#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
+#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
+#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
+
+unsigned char *highlander_plat_irq_setup(void);
+
+#ifdef CONFIG_SH_R7785RP
+void highlander_plat_pinmux_setup(void);
+#else
+#define highlander_plat_pinmux_setup()	do { } while (0)
+#endif
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/kernel/arch/sh/include/mach-common/mach/hp6xx.h b/kernel/arch/sh/include/mach-common/mach/hp6xx.h
new file mode 100644
index 000000000..6aaaf8596
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/hp6xx.h
@@ -0,0 +1,63 @@
+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sh_intc.h>
+
+#define HP680_BTN_IRQ		evt2irq(0x600)	/* IRQ0_IRQ */
+#define HP680_TS_IRQ		evt2irq(0x660)	/* IRQ3_IRQ */
+#define HP680_HD64461_IRQ	evt2irq(0x680)	/* IRQ4_IRQ */
+
+#define DAC_LCD_BRIGHTNESS	0
+#define DAC_SPEAKER_VOLUME	1
+
+#define PGDR_OPENED		0x01
+#define PGDR_MAIN_BATTERY_OUT	0x04
+#define PGDR_PLAY_BUTTON	0x08
+#define PGDR_REWIND_BUTTON	0x10
+#define PGDR_RECORD_BUTTON	0x20
+
+#define PHDR_TS_PEN_DOWN	0x08
+
+#define PJDR_LED_BLINK		0x02
+
+#define PKDR_LED_GREEN		0x10
+
+/* HP Palmtop 620lx/660lx speaker on/off */
+#define PKDR_SPEAKER		0x20
+
+#define SCPDR_TS_SCAN_ENABLE	0x20
+#define SCPDR_TS_SCAN_Y		0x02
+#define SCPDR_TS_SCAN_X		0x01
+
+#define SCPCR_TS_ENABLE		0x405
+#define SCPCR_TS_MASK		0xc0f
+
+#define ADC_CHANNEL_TS_Y	1
+#define ADC_CHANNEL_TS_X	2
+#define ADC_CHANNEL_BATTERY	3
+#define ADC_CHANNEL_BACKUP	4
+#define ADC_CHANNEL_CHARGE	5
+
+/* HP Jornada 680/690 speaker on/off */
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
+#define HD64461_GPBDR_LED_RED	0x80
+
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR	0xa4000130
+#define PKDR	0xa4000132
+
+#endif /* __ASM_SH_HP6XX_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/lboxre2.h b/kernel/arch/sh/include/mach-common/mach/lboxre2.h
new file mode 100644
index 000000000..3a4dcc5c7
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/lboxre2.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_SH_LBOXRE2_H
+#define __ASM_SH_LBOXRE2_H
+
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/sh_intc.h>
+
+#define IRQ_CF1		evt2irq(0x320)	/* CF1 */
+#define IRQ_CF0		evt2irq(0x340)	/* CF0 */
+#define IRQ_INTD	evt2irq(0x360)	/* INTD */
+#define IRQ_ETH1	evt2irq(0x380)	/* Ether1 */
+#define IRQ_ETH0	evt2irq(0x3a0)	/* Ether0 */
+#define IRQ_INTA	evt2irq(0x3c0)	/* INTA */
+
+void init_lboxre2_IRQ(void);
+
+#define __IO_PREFIX	lboxre2
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_LBOXRE2_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/magicpanelr2.h b/kernel/arch/sh/include/mach-common/mach/magicpanelr2.h
new file mode 100644
index 000000000..183a2f744
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/magicpanelr2.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-sh/magicpanelr2.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  I/O addresses and bitmasks for Magic Panel Release 2 board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <asm/gpio.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg)   __raw_writeb(__raw_readb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg)   __raw_writew(__raw_readw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg)   __raw_writel(__raw_readl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg)   __raw_writeb(__raw_readb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg)   __raw_writew(__raw_readw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg)   __raw_writel(__raw_readl(reg) & ~mask, reg)
+
+
+#define PA_LED          PORT_PADR      /* LED */
+
+
+/* BSC */
+#define CMNCR           0xA4FD0000UL
+#define CS0BCR          0xA4FD0004UL
+#define CS2BCR          0xA4FD0008UL
+#define CS3BCR          0xA4FD000CUL
+#define CS4BCR          0xA4FD0010UL
+#define CS5ABCR         0xA4FD0014UL
+#define CS5BBCR         0xA4FD0018UL
+#define CS6ABCR         0xA4FD001CUL
+#define CS6BBCR         0xA4FD0020UL
+#define CS0WCR          0xA4FD0024UL
+#define CS2WCR          0xA4FD0028UL
+#define CS3WCR          0xA4FD002CUL
+#define CS4WCR          0xA4FD0030UL
+#define CS5AWCR         0xA4FD0034UL
+#define CS5BWCR         0xA4FD0038UL
+#define CS6AWCR         0xA4FD003CUL
+#define CS6BWCR         0xA4FD0040UL
+
+
+/* usb */
+
+#define PORT_UTRCTL		0xA405012CUL
+#define PORT_UCLKCR_W		0xA40A0008UL
+
+#define INTC_ICR0		0xA414FEE0UL
+#define INTC_ICR1		0xA4140010UL
+#define INTC_ICR2		0xA4140012UL
+
+/* MTD */
+
+#define MPR2_MTD_BOOTLOADER_SIZE	0x00060000UL
+#define MPR2_MTD_KERNEL_SIZE		0x00200000UL
+
+#endif  /* __ASM_SH_MAGICPANELR2_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/mangle-port.h b/kernel/arch/sh/include/mach-common/mach/mangle-port.h
new file mode 100644
index 000000000..4ca1769a0
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/mangle-port.h
@@ -0,0 +1,49 @@
+/*
+ * SH version cribbed from the MIPS copy:
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __MACH_COMMON_MANGLE_PORT_H
+#define __MACH_COMMON_MANGLE_PORT_H
+
+/*
+ * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware;
+ * less sane hardware forces software to fiddle with this...
+ *
+ * Regardless, if the host bus endianness mismatches that of PCI/ISA, then
+ * you can't have the numerical value of data and byte addresses within
+ * multibyte quantities both preserved at the same time.  Hence two
+ * variations of functions: non-prefixed ones that preserve the value
+ * and prefixed ones that preserve byte addresses.  The latters are
+ * typically used for moving raw data between a peripheral and memory (cf.
+ * string I/O functions), hence the "__mem_" prefix.
+ */
+#if defined(CONFIG_SWAP_IO_SPACE)
+
+# define ioswabb(x)		(x)
+# define __mem_ioswabb(x)	(x)
+# define ioswabw(x)		le16_to_cpu(x)
+# define __mem_ioswabw(x)	(x)
+# define ioswabl(x)		le32_to_cpu(x)
+# define __mem_ioswabl(x)	(x)
+# define ioswabq(x)		le64_to_cpu(x)
+# define __mem_ioswabq(x)	(x)
+
+#else
+
+# define ioswabb(x)		(x)
+# define __mem_ioswabb(x)	(x)
+# define ioswabw(x)		(x)
+# define __mem_ioswabw(x)	cpu_to_le16(x)
+# define ioswabl(x)		(x)
+# define __mem_ioswabl(x)	cpu_to_le32(x)
+# define ioswabq(x)		(x)
+# define __mem_ioswabq(x)	cpu_to_le32(x)
+
+#endif
+
+#endif /* __MACH_COMMON_MANGLE_PORT_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/microdev.h b/kernel/arch/sh/include/mach-common/mach/microdev.h
new file mode 100644
index 000000000..dcb05fa8c
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/microdev.h
@@ -0,0 +1,71 @@
+/*
+ * linux/include/asm-sh/microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * Definitions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA.  should be noted that there
+ * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
+#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
+
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts.  i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA		 8
+#define MICRODEV_IRQ_PCI_INTB		 9
+#define MICRODEV_IRQ_PCI_INTC		10
+#define MICRODEV_IRQ_PCI_INTD		11
+
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/r2d.h b/kernel/arch/sh/include/mach-common/mach/r2d.h
new file mode 100644
index 000000000..e04f75eaa
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/r2d.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Board specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
+#define PA_CFCTL	0xa4000004	/* CF Timing control */
+#define PA_CFPOW	0xa4000006	/* CF Power control */
+#define PA_DISPCTL	0xa4000008	/* Display Timing control */
+#define PA_SDMPOW	0xa400000a	/* SD Power control */
+#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
+#define PA_PCICD	0xa400000e	/* PCI Extension detect control */
+#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
+
+#define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
+#define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
+#define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
+#define PA_R2D1_EXTRST		0xa4000028	/* Extension Reset control */
+#define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
+
+#define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
+#define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
+#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extension Reset control */
+#define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
+#define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
+
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_VERREG	0xa4000032	/* FPGA Version Register */
+#define PA_INPORT	0xa4000034	/* KEY Input Port control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+#define PA_BVERREG	0xa4000038	/* Board Revision Register */
+
+#define PA_AX88796L	0xaa000400	/* AX88796L Area */
+#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define R2D_FPGA_IRQ_BASE	100
+
+#define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
+#define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
+#define IRQ_TP			(R2D_FPGA_IRQ_BASE + 2)
+#define IRQ_RTC_T		(R2D_FPGA_IRQ_BASE + 3)
+#define IRQ_RTC_A		(R2D_FPGA_IRQ_BASE + 4)
+#define IRQ_SDCARD		(R2D_FPGA_IRQ_BASE + 5)
+#define IRQ_CF_CD		(R2D_FPGA_IRQ_BASE + 6)
+#define IRQ_CF_IDE		(R2D_FPGA_IRQ_BASE + 7)
+#define IRQ_AX88796		(R2D_FPGA_IRQ_BASE + 8)
+#define IRQ_KEY			(R2D_FPGA_IRQ_BASE + 9)
+#define IRQ_PCI_INTA		(R2D_FPGA_IRQ_BASE + 10)
+#define IRQ_PCI_INTB		(R2D_FPGA_IRQ_BASE + 11)
+#define IRQ_PCI_INTC		(R2D_FPGA_IRQ_BASE + 12)
+#define IRQ_PCI_INTD		(R2D_FPGA_IRQ_BASE + 13)
+
+/* arch/sh/boards/renesas/rts7751r2d/irq.c */
+void init_rts7751r2d_IRQ(void);
+int rts7751r2d_irq_demux(int);
+
+#endif  /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/kernel/arch/sh/include/mach-common/mach/romimage.h b/kernel/arch/sh/include/mach-common/mach/romimage.h
new file mode 100644
index 000000000..3670455fa
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/romimage.h
@@ -0,0 +1,11 @@
+#ifdef __ASSEMBLY__
+
+/* do nothing here by default */
+
+#else /* __ASSEMBLY__ */
+
+static inline void mmcif_update_progress(int nr)
+{
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/kernel/arch/sh/include/mach-common/mach/sdk7780.h b/kernel/arch/sh/include/mach-common/mach/sdk7780.h
new file mode 100644
index 000000000..ce64e02e9
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/sdk7780.h
@@ -0,0 +1,82 @@
+#ifndef __ASM_SH_RENESAS_SDK7780_H
+#define __ASM_SH_RENESAS_SDK7780_H
+
+/*
+ * linux/include/asm-sh/sdk7780.h
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sh_intc.h>
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM			0xa0000000	/* EPROM */
+#define PA_ROM_SIZE		0x00400000	/* EPROM size 4M byte */
+#define PA_FROM			0xa0800000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash-ROM size 4M byte */
+#define PA_EXT1			0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM		0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4			0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_USER		PA_EXT4		/* User Expansion Space */
+
+#define PA_PERIPHERAL	PA_AREA5_IO
+
+/* SRAM/Reserved */
+#define PA_RESERVED	(PA_PERIPHERAL + 0)
+/* FPGA base address */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01000000)
+/* SMC LAN91C111 */
+#define PA_LAN		(PA_PERIPHERAL + 0x01800000)
+
+
+#define FPGA_SRSTR      (PA_FPGA + 0x000)	/* System reset */
+#define FPGA_IRQ0SR     (PA_FPGA + 0x010)	/* IRQ0 status */
+#define FPGA_IRQ0MR     (PA_FPGA + 0x020)	/* IRQ0 mask */
+#define FPGA_BDMR       (PA_FPGA + 0x030)	/* Board operating mode */
+#define FPGA_INTT0PRTR  (PA_FPGA + 0x040)	/* Interrupt test mode0 port */
+#define FPGA_INTT0SELR  (PA_FPGA + 0x050)	/* Int. test mode0 select */
+#define FPGA_INTT1POLR  (PA_FPGA + 0x060)	/* Int. test mode0 polarity */
+#define FPGA_NMIR       (PA_FPGA + 0x070)	/* NMI source */
+#define FPGA_NMIMR      (PA_FPGA + 0x080)	/* NMI mask */
+#define FPGA_IRQR       (PA_FPGA + 0x090)	/* IRQX source */
+#define FPGA_IRQMR      (PA_FPGA + 0x0A0)	/* IRQX mask */
+#define FPGA_SLEDR      (PA_FPGA + 0x0B0)	/* LED control */
+#define PA_LED			FPGA_SLEDR
+#define FPGA_MAPSWR     (PA_FPGA + 0x0C0)	/* Map switch */
+#define FPGA_FPVERR     (PA_FPGA + 0x0D0)	/* FPGA version */
+#define FPGA_FPDATER    (PA_FPGA + 0x0E0)	/* FPGA date */
+#define FPGA_RSE        (PA_FPGA + 0x100)	/* Reset source */
+#define FPGA_EASR       (PA_FPGA + 0x110)	/* External area select */
+#define FPGA_SPER       (PA_FPGA + 0x120)	/* Serial port enable */
+#define FPGA_IMSR       (PA_FPGA + 0x130)	/* Interrupt mode select */
+#define FPGA_PCIMR      (PA_FPGA + 0x140)	/* PCI Mode */
+#define FPGA_DIPSWMR    (PA_FPGA + 0x150)	/* DIPSW monitor */
+#define FPGA_FPODR      (PA_FPGA + 0x160)	/* Output port data */
+#define FPGA_ATAESR     (PA_FPGA + 0x170)	/* ATA extended bus status */
+#define FPGA_IRQPOLR    (PA_FPGA + 0x180)	/* IRQx polarity */
+
+
+#define SDK7780_NR_IRL			15
+/* IDE/ATA interrupt */
+#define IRQ_CFCARD			evt2irq(0x3c0)
+/* SMC interrupt */
+#define IRQ_ETHERNET			evt2irq(0x2c0)
+
+
+/* arch/sh/boards/renesas/sdk7780/irq.c */
+void init_sdk7780_IRQ(void);
+
+#define __IO_PREFIX		sdk7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/secureedge5410.h b/kernel/arch/sh/include/mach-common/mach/secureedge5410.h
new file mode 100644
index 000000000..3653b9a4b
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/secureedge5410.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#define __IO_PREFIX	snapgear
+#include <asm/io_generic.h>
+
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+	 (secureedge5410_ioport = \
+			((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+	 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/sh2007.h b/kernel/arch/sh/include/mach-common/mach/sh2007.h
new file mode 100644
index 000000000..48180b9aa
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/sh2007.h
@@ -0,0 +1,117 @@
+#ifndef __MACH_SH2007_H
+#define __MACH_SH2007_H
+
+#define CS5BCR		0xff802050
+#define CS5WCR		0xff802058
+#define CS5PCR		0xff802070
+
+#define BUS_SZ8		1
+#define BUS_SZ16	2
+#define BUS_SZ32	3
+
+#define PCMCIA_IODYN	1
+#define PCMCIA_ATA	0
+#define PCMCIA_IO8	2
+#define PCMCIA_IO16	3
+#define PCMCIA_COMM8	4
+#define PCMCIA_COMM16	5
+#define PCMCIA_ATTR8	6
+#define PCMCIA_ATTR16	7
+
+#define TYPE_SRAM	0
+#define TYPE_PCMCIA	4
+
+/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWW5		0
+#define IWW6		3
+/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWD5		2
+#define IWRWD6		2
+/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWS5		2
+#define IWRWS6		2
+/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRD5		2
+#define IWRRD6		2
+/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRS5		0
+#define IWRRS6		2
+/* burst count (0-3:4,8,16,32) */
+#define BST5		0
+#define BST6		0
+/* bus size */
+#define SZ5		BUS_SZ16
+#define SZ6		BUS_SZ16
+/* RD hold for SRAM (0-1:0,1) */
+#define RDSPL5		0
+#define RDSPL6		0
+/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
+#define BW5		0
+#define BW6		0
+/* Multiplex (0-1:0,1) */
+#define MPX5		0
+#define MPX6		0
+/* device type */
+#define TYPE5		TYPE_PCMCIA
+#define TYPE6		TYPE_PCMCIA
+/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADS5		0
+#define ADS6		0
+/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADH5		0
+#define ADH6		0
+/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDS5		0
+#define RDS6		0
+/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDH5		0
+#define RDH6		0
+/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTS5		0
+#define WTS6		0
+/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTH5		0
+#define WTH6		0
+/* BS hold (0-1:1,2) */
+#define BSH5		0
+#define BSH6		0
+/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define IW5		6	/* 60ns PIO mode 4 */
+#define IW6		15	/* 250ns */
+
+#define SAA5		PCMCIA_IODYN	/* IDE area b4000000-b5ffffff */
+#define SAB5		PCMCIA_IODYN	/* CF  area b6000000-b7ffffff */
+#define PCWA5		0	/* additional wait A (0-3:0,15,30,50) */
+#define PCWB5		0	/* additional wait B (0-3:0,15,30,50) */
+/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define PCIW5		12
+/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEDA5		2
+/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEDB5		4
+/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEHA5		2
+/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEHB5		3
+
+#define CS5BCR_D	((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)|		\
+			(IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)|		\
+			(SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
+#define CS5WCR_D	((ADS5<<28)|(ADH5<<24)|(RDS5<<20)|	\
+			(RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
+#define CS5PCR_D	((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)|		\
+			(PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)|		\
+			(TEDB5<<8)|(TEHA5<<4)|TEHB5)
+
+#define SMC0_BASE       0xb0800000      /* eth0 */
+#define SMC1_BASE       0xb0900000      /* eth1 */
+#define CF_BASE         0xb6100000      /* Compact Flash (I/O area) */
+#define IDE_BASE        0xb4000000      /* IDE */
+#define PC104_IO_BASE   0xb8000000
+#define PC104_MEM_BASE  0xba000000
+#define SMC_IO_SIZE     0x100
+
+#define CF_OFFSET       0x1f0
+#define IDE_OFFSET      0x170
+
+#endif /* __MACH_SH2007_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/sh7763rdp.h b/kernel/arch/sh/include/mach-common/mach/sh7763rdp.h
new file mode 100644
index 000000000..8750cc852
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/sh7763rdp.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0	0xFFEF0070
+#define PORT_PSEL1	0xFFEF0072
+#define PORT_PSEL2	0xFFEF0074
+#define PORT_PSEL3	0xFFEF0076
+#define PORT_PSEL4	0xFFEF0078
+
+#define PORT_PACR	0xFFEF0000
+#define PORT_PCCR	0xFFEF0004
+#define PORT_PFCR	0xFFEF000A
+#define PORT_PGCR	0xFFEF000C
+#define PORT_PHCR	0xFFEF000E
+#define PORT_PICR	0xFFEF0010
+#define PORT_PJCR	0xFFEF0012
+#define PORT_PKCR	0xFFEF0014
+#define PORT_PLCR	0xFFEF0016
+#define PORT_PMCR	0xFFEF0018
+#define PORT_PNCR	0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG	0xB1000000
+#define CPLD_CPLD_CMD_REG		0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC	0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX	sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/sh7785lcr.h b/kernel/arch/sh/include/mach-common/mach/sh7785lcr.h
new file mode 100644
index 000000000..1292ae5c2
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/sh7785lcr.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address			| S2-5 = OFF	| S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ * 0x06000000 - 0x07ffffff(CS1)	| I2C		| I2C
+ * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ * 0x14000000 - 0x17ffffff(CS5)	| reserved	| USB
+ * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR		0x00000000
+#define NOR_FLASH_SIZE		0x04000000
+
+#define PLD_BASE_ADDR		0x04000000
+#define PLD_PCICR		(PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR	(PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR		(PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR		(PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR		(PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR		(PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
+
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#define PCA9564_SIZE		0x00000100
+
+#define PCA9564_PROTO_32BIT_ADDR	0x14000000
+
+#define SM107_MEM_ADDR		0x10000000
+#define SM107_MEM_SIZE		0x00e00000
+#define SM107_REG_ADDR		0x13e00000
+#define SM107_REG_SIZE		0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR		0x14000000	/* USB */
+#define CG200_ADDR		0x18000000	/* SD */
+#else
+#define R8A66597_ADDR		0x08000000
+#define CG200_ADDR		0x0c000000
+#endif
+
+#define R8A66597_SIZE		0x00000100
+#define CG200_SIZE		0x00010000
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/kernel/arch/sh/include/mach-common/mach/shmin.h b/kernel/arch/sh/include/mach-common/mach/shmin.h
new file mode 100644
index 000000000..36ba138a8
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/shmin.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif
diff --git a/kernel/arch/sh/include/mach-common/mach/titan.h b/kernel/arch/sh/include/mach-common/mach/titan.h
new file mode 100644
index 000000000..fa3cd801c
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/titan.h
@@ -0,0 +1,19 @@
+/*
+ * Platform definitions for Titan
+ */
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
+
+#include <linux/sh_intc.h>
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN		evt2irq(0x240)	/* eth0 (WAN) */
+#define TITAN_IRQ_LAN		evt2irq(0x2a0)	/* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA		evt2irq(0x300)	/* mPCI A */
+#define TITAN_IRQ_MPCIB		evt2irq(0x360)	/* mPCI B */
+#define TITAN_IRQ_USB		evt2irq(0x360)	/* USB */
+
+#endif /* __ASM_SH_TITAN_H */
diff --git a/kernel/arch/sh/include/mach-common/mach/urquell.h b/kernel/arch/sh/include/mach-common/mach/urquell.h
new file mode 100644
index 000000000..14b3e1d01
--- /dev/null
+++ b/kernel/arch/sh/include/mach-common/mach/urquell.h
@@ -0,0 +1,68 @@
+#ifndef __MACH_URQUELL_H
+#define __MACH_URQUELL_H
+
+/*
+ * ------ 0x00000000 ------------------------------------
+ *  CS0 | (SW1,SW47)    EEPROM, SRAM, NOR FLASH
+ * -----+ 0x04000000 ------------------------------------
+ *  CS1 | (SW47)        SRAM, SRAM-LAN-PCMCIA, NOR FLASH
+ * -----+ 0x08000000 ------------------------------------
+ *  CS2 |               DDR3
+ *  CS3 |
+ * -----+ 0x10000000 ------------------------------------
+ *  CS4 |               PCIe
+ * -----+ 0x14000000 ------------------------------------
+ *  CS5 | (SW47)        LRAM/URAM, SRAM-LAN-PCMCIA
+ * -----+ 0x18000000 ------------------------------------
+ *  CS6 |               ATA, NAND FLASH
+ * -----+ 0x1c000000 ------------------------------------
+ *  CS7 |               SH7786 register
+ * -----+------------------------------------------------
+ */
+
+#define NOR_FLASH_ADDR	0x00000000
+#define NOR_FLASH_SIZE	0x04000000
+
+#define CS1_BASE	0x05000000
+#define CS5_BASE	0x15000000
+#define FPGA_BASE	CS1_BASE
+
+#define BOARDREG(ofs)	(FPGA_BASE + ofs##_OFS)
+#define UBOARDREG(ofs)	(0xa0000000 + FPGA_BASE + ofs##_OFS)
+
+#define SRSTR_OFS	0x0000 /* System reset register */
+#define BDMR_OFS	0x0010 /* Board operating mode resister */
+#define IRL0SR_OFS	0x0020 /* IRL0 Status register */
+#define IRL0MSKR_OFS	0x0030 /* IRL0 Mask register */
+#define IRL1SR_OFS	0x0040 /* IRL1 Status register */
+#define IRL1MSKR_OFS	0x0050 /* IRL1 Mask register */
+#define IRL2SR_OFS	0x0060 /* IRL2 Status register */
+#define IRL2MSKR_OFS	0x0070 /* IRL2 Mask register */
+#define IRL3SR_OFS	0x0080 /* IRL3 Status register */
+#define IRL3MSKR_OFS	0x0090 /* IRL3 Mask register */
+#define SOFTINTR_OFS	0x0120 /* Softwear Interrupt register */
+#define SLEDR_OFS	0x0130 /* LED control resister */
+#define MAPSCIFSWR_OFS	0x0140 /* Map/SCIF Switch register */
+#define FPVERR_OFS	0x0150 /* FPGA Version register */
+#define FPDATER_OFS	0x0160 /* FPGA Date register */
+#define FPYEARR_OFS	0x0170 /* FPGA Year register */
+#define TCLKCR_OFS	0x0180 /* TCLK Control register */
+#define DIPSWMR_OFS	0x1000 /* DIPSW monitor register */
+#define FPODR_OFS	0x1010 /* Output port data register */
+#define ATACNR_OFS	0x1020 /* ATA-CN Control/status register */
+#define FPINDR_OFS	0x1030 /* Input port data register */
+#define MDSWMR_OFS	0x1040 /* MODE SW monitor register */
+#define DDR3BUPCR_OFS	0x1050 /* DDR3 Backup control register */
+#define SSICODECCR_OFS	0x1060 /* SSI-CODEC control register */
+#define PCIESLOTSR_OFS	0x1070 /* PCIexpress Slot status register */
+#define ETHERPORTSR_OFS	0x1080 /* EtherPhy Port status register */
+#define LATCHCR_OFS	0x3000 /* Latch control register */
+#define LATCUAR_OFS	0x3010 /* Latch upper address register */
+#define LATCLAR_OFS	0x3012 /* Latch lower address register */
+#define LATCLUDR_OFS	0x3024 /* Latch D31-16 register */
+#define LATCLLDR_OFS	0x3026 /* Latch D15-0 register */
+
+#define CHARLED_OFS	0x2000 /* Character LED */
+
+#endif  /* __MACH_URQUELL_H */
+