Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

123 files changed, 16281 insertions, 0 deletions

diff --git a/kernel/arch/sh/boards/Kconfig b/kernel/arch/sh/boards/Kconfig
new file mode 100644
index 000000000..89963d13f
--- /dev/null
+++ b/kernel/arch/sh/boards/Kconfig
@@ -0,0 +1,383 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_ALPHA_BOARD
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7724_SOLUTION_ENGINE
+	bool "SolutionEngine7724"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	select GENERIC_IRQ_CHIP
+	select IRQ_DOMAIN
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED if MMU
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK
+	bool "Renesas Starter Kit"
+	depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \
+	  CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	 Select this option if configuring for any of the RSK+ MCU
+	 evaluation platforms.
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_SDK7786
+	bool "SDK7786"
+	depends on CPU_SUBTYPE_SH7786
+	select SYS_SUPPORTS_PCI
+	select NO_IOPORT_MAP if !PCI
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_SRAM_POOL
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select SDK7786 if configuring for a Renesas Technology Europe
+	  SH7786-65nm board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED if MMU
+
+config SH_SH7757LCR
+	bool "SH7757LCR"
+	depends on CPU_SUBTYPE_SH7757
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR && 29BIT
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_SH7785LCR_PT
+	bool "SH7785LCR prototype board on 32-bit MMU mode"
+	depends on SH_SH7785LCR && 32BIT
+	default n
+	help
+	  If you use prototype board, this option is enabled.
+
+config SH_URQUELL
+	bool "Urquell"
+	depends on CPU_SUBTYPE_SH7786
+	select ARCH_REQUIRE_GPIOLIB
+	select SYS_SUPPORTS_PCI
+	select NO_IOPORT_MAP if !PCI
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_KFR2R09
+	bool "KFR2R09"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  "Kit For R2R for 2009" support.
+
+config SH_ECOVEC
+	bool "EcoVec"
+	depends on CPU_SUBTYPE_SH7724
+	select ARCH_REQUIRE_GPIOLIB
+	select SND_SOC_DA7210 if SND_SIMPLE_CARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_ESPT
+	bool "ESPT"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select ESPT if configuring for a Renesas SH7763
+	  with gigabit ether evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_EDOSK7760
+	bool "EDOSK7760"
+	depends on CPU_SUBTYPE_SH7760
+	help
+	  Select if configuring for a Renesas EDOSK7760
+	  evaluation board.
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+	select NO_IOPORT_MAP if !PCI
+	select IRQ_DOMAIN
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+	select ARCH_MIGHT_HAVE_PC_SERIO
+
+config SH_POLARIS
+	bool "SMSC Polaris"
+	select CPU_HAS_IPR_IRQ
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select if configuring for an SMSC Polaris development board
+
+config SH_SH2007
+	bool "SH-2007 board"
+	select NO_IOPORT_MAP
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  SH-2007 is a single-board computer based around SH7780 chip
+	  intended for embedded applications.
+	  It has an Ethernet interface (SMC9118), direct connected
+	  Compact Flash socket, two serial ports and PC-104 bus.
+	  More information at <http://sh2000.sh-linux.org>.
+
+config SH_APSH4A3A
+	bool "AP-SH4A-3A"
+	select SH_ALPHA_BOARD
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7785
+	help
+	  Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A.
+
+config SH_APSH4AD0A
+	bool "AP-SH4AD-0A"
+	select SH_ALPHA_BOARD
+	select SYS_SUPPORTS_PCI
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	depends on CPU_SUBTYPE_SH7786
+	help
+	  Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A.
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+source "arch/sh/boards/mach-rsk/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int "Magic Panel R2 Version"
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
+
+endmenu
diff --git a/kernel/arch/sh/boards/Makefile b/kernel/arch/sh/boards/Makefile
new file mode 100644
index 000000000..975a0f64f
--- /dev/null
+++ b/kernel/arch/sh/boards/Makefile
@@ -0,0 +1,17 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410)	+= board-secureedge5410.o
+obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705)	+= board-edosk7705.o
+obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
+obj-$(CONFIG_SH_ESPT)		+= board-espt.o
+obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
+obj-$(CONFIG_SH_TITAN)		+= board-titan.o
+obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o
+obj-$(CONFIG_SH_APSH4A3A)	+= board-apsh4a3a.o
+obj-$(CONFIG_SH_APSH4AD0A)	+= board-apsh4ad0a.o
diff --git a/kernel/arch/sh/boards/board-apsh4a3a.c b/kernel/arch/sh/boards/board-apsh4a3a.c
new file mode 100644
index 000000000..0a39c2416
--- /dev/null
+++ b/kernel/arch/sh/boards/board-apsh4a3a.c
@@ -0,0 +1,185 @@
+/*
+ * ALPHAPROJECT AP-SH4A-3A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/physmap.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4a3a_devices[] __initdata = {
+	&nor_flash_device,
+	&smsc911x_device,
+};
+
+static int __init apsh4a3a_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(apsh4a3a_devices,
+				    ARRAY_SIZE(apsh4a3a_devices));
+}
+device_initcall(apsh4a3a_devices_setup);
+
+static int apsh4a3a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4a3a_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
+}
+
+static void __init apsh4a3a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int apsh4a3a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value &= ~MODE_PIN0;  /* Clock Mode 16 */
+	value &= ~MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value |=  MODE_PIN4;
+	value &= ~MODE_PIN5;  /* 16-bit Area0 bus width */
+	value |=  MODE_PIN6;  /* Area 0 SRAM interface */
+	value |=  MODE_PIN7;
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Master Mode */
+	value |=  MODE_PIN10; /* Crystal resonator */
+	value |=  MODE_PIN11; /* Display Unit */
+	value |=  MODE_PIN12;
+	value &= ~MODE_PIN13; /* 29-bit address mode */
+	value |=  MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4a3a __initmv = {
+	.mv_name		= "AP-SH4A-3A",
+	.mv_setup		= apsh4a3a_setup,
+	.mv_clk_init		= apsh4a3a_clk_init,
+	.mv_init_irq		= apsh4a3a_init_irq,
+	.mv_mode_pins		= apsh4a3a_mode_pins,
+};
diff --git a/kernel/arch/sh/boards/board-apsh4ad0a.c b/kernel/arch/sh/boards/board-apsh4ad0a.c
new file mode 100644
index 000000000..92eac3a99
--- /dev/null
+++ b/kernel/arch/sh/boards/board-apsh4ad0a.c
@@ -0,0 +1,135 @@
+/*
+ * ALPHAPROJECT AP-SH4AD-0A Support.
+ *
+ * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0xA4000000,
+		.end		= 0xA4000000 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x200),
+		.end		= evt2irq(0x200),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *apsh4ad0a_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init apsh4ad0a_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(apsh4ad0a_devices,
+				    ARRAY_SIZE(apsh4ad0a_devices));
+}
+device_initcall(apsh4ad0a_devices_setup);
+
+static int apsh4ad0a_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of SW1 and SW2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |=  MODE_PIN0;  /* Clock Mode 3 */
+	value |=  MODE_PIN1;
+	value &= ~MODE_PIN2;
+	value &= ~MODE_PIN3;
+	value &= ~MODE_PIN4;  /* 16-bit Area0 bus width  */
+	value |=  MODE_PIN5;
+	value |=  MODE_PIN6;
+	value |=  MODE_PIN7;  /* Normal mode */
+	value |=  MODE_PIN8;  /* Little Endian */
+	value |=  MODE_PIN9;  /* Crystal resonator */
+	value &= ~MODE_PIN10; /* 29-bit address mode */
+	value &= ~MODE_PIN11; /* PCI-E Root port */
+	value &= ~MODE_PIN12; /* 4 lane + 1 lane */
+	value |=  MODE_PIN13; /* AUD Enable */
+	value &= ~MODE_PIN14; /* Normal Operation */
+
+	return value;
+}
+
+static int apsh4ad0a_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333000);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init apsh4ad0a_setup(char **cmdline_p)
+{
+	pr_info("Alpha Project AP-SH4AD-0A support:\n");
+}
+
+static void __init apsh4ad0a_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_apsh4ad0a __initmv = {
+	.mv_name		= "AP-SH4AD-0A",
+	.mv_setup		= apsh4ad0a_setup,
+	.mv_mode_pins		= apsh4ad0a_mode_pins,
+	.mv_clk_init		= apsh4ad0a_clk_init,
+	.mv_init_irq		= apsh4ad0a_init_irq,
+};
diff --git a/kernel/arch/sh/boards/board-edosk7705.c b/kernel/arch/sh/boards/board-edosk7705.c
new file mode 100644
index 000000000..5e24c17bb
--- /dev/null
+++ b/kernel/arch/sh/boards/board-edosk7705.c
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <linux/sh_intc.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ	evt2irq(0x320)
+
+static void __init sh_edosk7705_init_irq(void)
+{
+	make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ETHERNET_IRQ,
+		.end	= ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+	&smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+	return platform_add_devices(edosk7705_devices,
+				    ARRAY_SIZE(edosk7705_devices));
+}
+device_initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+	.mv_name		= "EDOSK7705",
+	.mv_init_irq		= sh_edosk7705_init_irq,
+};
diff --git a/kernel/arch/sh/boards/board-edosk7760.c b/kernel/arch/sh/boards/board-edosk7760.c
new file mode 100644
index 000000000..bab5b9513
--- /dev/null
+++ b/kernel/arch/sh/boards/board-edosk7760.c
@@ -0,0 +1,191 @@
+/*
+ * Renesas Europe EDOSK7760 Board Support
+ *
+ * Copyright (C) 2008 SPES Societa' Progettazione Elettronica e Software Ltd.
+ * Author: Luca Santini <luca.santini@spesonline.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/interrupt.h>
+#include <linux/sh_intc.h>
+#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/delay.h>
+#include <asm/i2c-sh7760.h>
+#include <asm/sizes.h>
+
+/* Bus state controller registers for CS4 area */
+#define BSC_CS4BCR	0xA4FD0010
+#define BSC_CS4WCR	0xA4FD0030
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+/* NOR flash */
+static struct mtd_partition edosk7760_nor_flash_partitions[] = {
+	{
+		.name = "bootloader",
+		.offset = 0,
+		.size = SZ_256K,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = SZ_2M,
+	}, {
+		.name = "fs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (26 << 20),
+	}, {
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data edosk7760_nor_flash_data = {
+	.width		= 4,
+	.parts		= edosk7760_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(edosk7760_nor_flash_partitions),
+};
+
+static struct resource edosk7760_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00000000 + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device edosk7760_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= edosk7760_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(edosk7760_nor_flash_resources),
+	.dev		= {
+		.platform_data = &edosk7760_nor_flash_data,
+	},
+};
+
+/* i2c initialization functions */
+static struct sh7760_i2c_platdata i2c_pd = {
+	.speed_khz	= 400,
+};
+
+static struct resource sh7760_i2c1_res[] = {
+	{
+		.start	= SH7760_I2C1_MMIO,
+		.end	= SH7760_I2C1_MMIOEND,
+		.flags	= IORESOURCE_MEM,
+	},{
+		.start	= evt2irq(0x9e0),
+		.end	= evt2irq(0x9e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7760_i2c1_dev = {
+	.dev    = {
+		.platform_data	= &i2c_pd,
+	},
+
+	.name		= SH7760_I2C_DEVNAME,
+	.id		= 1,
+	.resource	= sh7760_i2c1_res,
+	.num_resources	= ARRAY_SIZE(sh7760_i2c1_res),
+};
+
+static struct resource sh7760_i2c0_res[] = {
+	{
+		.start	= SH7760_I2C0_MMIO,
+		.end	= SH7760_I2C0_MMIOEND,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x9c0),
+		.end	= evt2irq(0x9c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh7760_i2c0_dev = {
+	.dev    = {
+		.platform_data	= &i2c_pd,
+	},
+	.name		= SH7760_I2C_DEVNAME,
+	.id		= 0,
+	.resource	= sh7760_i2c0_res,
+	.num_resources	= ARRAY_SIZE(sh7760_i2c0_res),
+};
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x2a0),
+		.end	= evt2irq(0x2a0),
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7760_devices[] __initdata = {
+	&smc91x_dev,
+	&edosk7760_nor_flash_device,
+	&sh7760_i2c0_dev,
+	&sh7760_i2c1_dev,
+};
+
+static int __init init_edosk7760_devices(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+
+	return platform_add_devices(edosk7760_devices,
+				    ARRAY_SIZE(edosk7760_devices));
+}
+device_initcall(init_edosk7760_devices);
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_edosk7760 __initmv = {
+	.mv_name	= "EDOSK7760",
+};
diff --git a/kernel/arch/sh/boards/board-espt.c b/kernel/arch/sh/boards/board-espt.c
new file mode 100644
index 000000000..7291e2f11
--- /dev/null
+++ b/kernel/arch/sh/boards/board-espt.c
@@ -0,0 +1,109 @@
+/*
+ * Data Technology Inc. ESPT-GIGA board support
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * SZ_128K),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * SZ_128K),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+	.width = 2,
+	.parts = espt_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device espt_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = espt_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+	.dev = {
+		.platform_data = &espt_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
+	}, {
+
+		.start  = evt2irq(0x920),   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 0,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device espt_eth_device = {
+	.name       = "sh7763-gether",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+	&espt_nor_flash_device,
+	&espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+	return platform_add_devices(espt_devices,
+				    ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+	.mv_name = "ESPT-GIGA",
+};
diff --git a/kernel/arch/sh/boards/board-magicpanelr2.c b/kernel/arch/sh/boards/board-magicpanelr2.c
new file mode 100644
index 000000000..20500858b
--- /dev/null
+++ b/kernel/arch/sh/boards/board-magicpanelr2.c
@@ -0,0 +1,393 @@
+/*
+ * linux/arch/sh/boards/magicpanel/setup.c
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  Magic Panel Release 2 board setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/sh_intc.h>
+#include <mach/magicpanelr2.h>
+#include <asm/heartbeat.h>
+#include <cpu/sh7720.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+#define LAN9115_READY	(__raw_readl(0xA8000084UL) & 0x00000001UL)
+
+/* Wait until reset finished. Timeout is 100ms. */
+static int __init ethernet_reset_finished(void)
+{
+	int i;
+
+	if (LAN9115_READY)
+		return 1;
+
+	for (i = 0; i < 10; ++i) {
+		mdelay(10);
+		if (LAN9115_READY)
+			return 1;
+	}
+
+	return 0;
+}
+
+static void __init reset_ethernet(void)
+{
+	/* PMDR: LAN_RESET=on */
+	CLRBITS_OUTB(0x10, PORT_PMDR);
+
+	udelay(200);
+
+	/* PMDR: LAN_RESET=off */
+	SETBITS_OUTB(0x10, PORT_PMDR);
+}
+
+static void __init setup_chip_select(void)
+{
+	/* CS2: LAN (0x08000000 - 0x0bffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x36db0400, CS2BCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x000003c0, CS2WCR);
+
+	/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS4BCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x00100981, CS4WCR);
+
+	/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS5ABCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x00100981, CS5AWCR);
+
+	/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS5BBCR);
+	/* (SW:1.5 WR:3 HW:1.5), ext. wait */
+	__raw_writel(0x00100981, CS5BWCR);
+
+	/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
+	/* no idle cycles, normal space, 8 bit data bus */
+	__raw_writel(0x00000200, CS6ABCR);
+	/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
+	__raw_writel(0x001009C1, CS6AWCR);
+}
+
+static void __init setup_port_multiplexing(void)
+{
+	/* A7 GPO(LED8);     A6 GPO(LED7);     A5 GPO(LED6);	  A4 GPO(LED5);
+	 * A3 GPO(LED4);     A2 GPO(LED3);     A1 GPO(LED2);	  A0 GPO(LED1);
+	 */
+	__raw_writew(0x5555, PORT_PACR);	/* 01 01 01 01 01 01 01 01 */
+
+	/* B7 GPO(RST4);   B6 GPO(RST3);  B5 GPO(RST2);    B4 GPO(RST1);
+	 * B3 GPO(PB3);	   B2 GPO(PB2);	  B1 GPO(PB1);	   B0 GPO(PB0);
+	 */
+	__raw_writew(0x5555, PORT_PBCR);	/* 01 01 01 01 01 01 01 01 */
+
+	/* C7 GPO(PC7);	  C6 GPO(PC6);	  C5 GPO(PC5);	   C4 GPO(PC4);
+	 * C3 LCD_DATA3;  C2 LCD_DATA2;   C1 LCD_DATA1;	   C0 LCD_DATA0;
+	 */
+	__raw_writew(0x5500, PORT_PCCR);	/* 01 01 01 01 00 00 00 00 */
+
+	/* D7 GPO(PD7);	D6 GPO(PD6);	D5 GPO(PD5);	   D4 GPO(PD4);
+	 * D3 GPO(PD3);	D2 GPO(PD2);	D1 GPO(PD1);	   D0 GPO(PD0);
+	 */
+	__raw_writew(0x5555, PORT_PDCR);	/* 01 01 01 01 01 01 01 01 */
+
+	/* E7 (x);	  E6 GPI(nu);	 E5 GPI(nu);	  E4 LCD_M_DISP;
+	 * E3 LCD_CL1;	  E2 LCD_CL2;	 E1 LCD_DON;	  E0 LCD_FLM;
+	 */
+	__raw_writew(0x3C00, PORT_PECR);	/* 00 11 11 00 00 00 00 00 */
+
+	/* F7 (x);	     F6 DA1(VLCD);     F5 DA0(nc);	  F4 AN3;
+	 * F3 AN2(MID_AD);   F2 AN1(EARTH_AD); F1 AN0(TEMP);	  F0 GPI+(nc);
+	 */
+	__raw_writew(0x0002, PORT_PFCR);	/* 00 00 00 00 00 00 00 10 */
+
+	/* G7 (x);	  G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
+	 * G3 GPI(KEY1);  G2 GPO(LED11);	G1 GPO(LED10);     G0 GPO(LED9);
+	 */
+	__raw_writew(0x03D5, PORT_PGCR);	/* 00 00 00 11 11 01 01 01 */
+
+	/* H7 (x);	      H6 /RAS(BRAS);	  H5 /CAS(BCAS); H4 CKE(BCKE);
+	 * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR;	 H0 USB1_PWR;
+	 */
+	__raw_writew(0x0050, PORT_PHCR);	/* 00 00 00 00 01 01 00 00 */
+
+	/* J7 (x);	  J6 AUDCK;	   J5 ASEBRKAK;	    J4 AUDATA3;
+	 * J3 AUDATA2;	  J2 AUDATA1;	   J1 AUDATA0;	    J0 AUDSYNC;
+	 */
+	__raw_writew(0x0000, PORT_PJCR);	/* 00 00 00 00 00 00 00 00 */
+
+	/* K7 (x);	    K6 (x);	     K5 (x);	   K4 (x);
+	 * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
+	 */
+	__raw_writew(0x00FF, PORT_PKCR);	/* 00 00 00 00 11 11 11 11 */
+
+	/* L7 TRST;	   L6 TMS;	     L5 TDO;		  L4 TDI;
+	 * L3 TCK;	   L2 (x);	     L1 (x);		  L0 (x);
+	 */
+	__raw_writew(0x0000, PORT_PLCR);	/* 00 00 00 00 00 00 00 00 */
+
+	/* M7 GPO(CURRENT_SINK);    M6 GPO(PWR_SWITCH);     M5 GPO(LAN_SPEED);
+	 * M4 GPO(LAN_RESET);       M3 GPO(BUZZER);	    M2 GPO(LCD_BL);
+	 * M1 CS5B(CAN3_CS);	    M0 GPI+(nc);
+	 */
+	__raw_writew(0x5552, PORT_PMCR);	   /* 01 01 01 01 01 01 00 10 */
+
+	/* CURRENT_SINK=off,	PWR_SWITCH=off, LAN_SPEED=100MBit,
+	 * LAN_RESET=off,	BUZZER=off,	LCD_BL=off
+	 */
+#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
+	__raw_writeb(0x30, PORT_PMDR);
+#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
+	__raw_writeb(0xF0, PORT_PMDR);
+#else
+#error Unknown revision of PLATFORM_MP_R2
+#endif
+
+	/* P7 (x);	       P6 (x);		  P5 (x);
+	 * P4 GPO(nu);	       P3 IRQ3(LAN_IRQ);  P2 IRQ2(CAN3_IRQ);
+	 * P1 IRQ1(CAN2_IRQ);  P0 IRQ0(CAN1_IRQ)
+	 */
+	__raw_writew(0x0100, PORT_PPCR);	/* 00 00 00 01 00 00 00 00 */
+	__raw_writeb(0x10, PORT_PPDR);
+
+	/* R7 A25;	     R6 A24;	     R5 A23;		  R4 A22;
+	 * R3 A21;	     R2 A20;	     R1 A19;		  R0 A0;
+	 */
+	gpio_request(GPIO_FN_A25, NULL);
+	gpio_request(GPIO_FN_A24, NULL);
+	gpio_request(GPIO_FN_A23, NULL);
+	gpio_request(GPIO_FN_A22, NULL);
+	gpio_request(GPIO_FN_A21, NULL);
+	gpio_request(GPIO_FN_A20, NULL);
+	gpio_request(GPIO_FN_A19, NULL);
+	gpio_request(GPIO_FN_A0, NULL);
+
+	/* S7 (x);		S6 (x);        S5 (x);	     S4 GPO(EEPROM_CS2);
+	 * S3 GPO(EEPROM_CS1);  S2 SIOF0_TXD;  S1 SIOF0_RXD; S0 SIOF0_SCK;
+	 */
+	__raw_writew(0x0140, PORT_PSCR);	/* 00 00 00 01 01 00 00 00 */
+
+	/* T7 (x);	   T6 (x);	  T5 (x);	  T4 COM1_CTS;
+	 * T3 COM1_RTS;	   T2 COM1_TXD;	  T1 COM1_RXD;	  T0 GPO(WDOG)
+	 */
+	__raw_writew(0x0001, PORT_PTCR);	/* 00 00 00 00 00 00 00 01 */
+
+	/* U7 (x);	     U6 (x);	   U5 (x);	  U4 GPI+(/AC_FAULT);
+	 * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD;  U0 TOUCH_SCK;
+	 */
+	__raw_writew(0x0240, PORT_PUCR);	/* 00 00 00 10 01 00 00 00 */
+
+	/* V7 (x);	  V6 (x);	V5 (x);		  V4 GPO(MID2);
+	 * V3 GPO(MID1);  V2 CARD_TxD;	V1 CARD_RxD;	  V0 GPI+(/BAT_FAULT);
+	 */
+	__raw_writew(0x0142, PORT_PVCR);	/* 00 00 00 01 01 00 00 10 */
+}
+
+static void __init mpr2_setup(char **cmdline_p)
+{
+	/* set Pin Select Register A:
+	 * /PCC_CD1, /PCC_CD2,  PCC_BVD1, PCC_BVD2,
+	 * /IOIS16,  IRQ4,	IRQ5,	  USB1d_SUSPEND
+	 */
+	__raw_writew(0xAABC, PORT_PSELA);
+	/* set Pin Select Register B:
+	 * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
+	 * LCD_VEPWC,  IIC_SDA,    IIC_SCL, Reserved
+	 */
+	__raw_writew(0x3C00, PORT_PSELB);
+	/* set Pin Select Register C:
+	 * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
+	 */
+	__raw_writew(0x0000, PORT_PSELC);
+	/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
+	 * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
+	 */
+	__raw_writew(0x0000, PORT_PSELD);
+	/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
+	__raw_writew(0x0101, PORT_UTRCTL);
+	/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
+	__raw_writew(0xA5C0, PORT_UCLKCR_W);
+
+	setup_chip_select();
+
+	setup_port_multiplexing();
+
+	reset_ethernet();
+
+	printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
+				CONFIG_SH_MAGIC_PANEL_R2_VERSION);
+
+	if (ethernet_reset_finished() == 0)
+		printk(KERN_WARNING "Ethernet not ready\n");
+}
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0xa8000000,
+		.end		= 0xabffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= evt2irq(0x660),
+		.end		= evt2irq(0x660),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.flags		= HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition mpr2_partitions[] = {
+	/* Reserved for bootloader, read-only */
+	{
+		.name = "Bootloader",
+		.offset = 0x00000000UL,
+		.size = MPR2_MTD_BOOTLOADER_SIZE,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	/* Reserved for kernel image */
+	{
+		.name = "Kernel",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MPR2_MTD_KERNEL_SIZE,
+	},
+	/* Rest is used for Flash FS */
+	{
+		.name = "Flash_FS",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts		= mpr2_partitions,
+	.nr_parts	= ARRAY_SIZE(mpr2_partitions),
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x2000000UL,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+/*
+ * Add all resources to the platform_device
+ */
+
+static struct platform_device *mpr2_devices[] __initdata = {
+	&heartbeat_device,
+	&smsc911x_device,
+	&flash_device,
+};
+
+
+static int __init mpr2_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
+}
+device_initcall(mpr2_devices_setup);
+
+/*
+ * Initialize IRQ setting
+ */
+static void __init init_mpr2_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
+
+	irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW);    /* IRQ0 CAN1 */
+	irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW);    /* IRQ1 CAN2 */
+	irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW);    /* IRQ2 CAN3 */
+	irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW);    /* IRQ3 SMSC9115 */
+	irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING);  /* IRQ4 touchscreen */
+	irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
+
+	intc_set_priority(evt2irq(0x600), 13);		/* IRQ0 CAN1 */
+	intc_set_priority(evt2irq(0x620), 13);		/* IRQ0 CAN2 */
+	intc_set_priority(evt2irq(0x640), 13);		/* IRQ0 CAN3 */
+	intc_set_priority(evt2irq(0x660), 6);		/* IRQ3 SMSC9115 */
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_mpr2 __initmv = {
+	.mv_name		= "mpr2",
+	.mv_setup		= mpr2_setup,
+	.mv_init_irq		= init_mpr2_IRQ,
+};
diff --git a/kernel/arch/sh/boards/board-polaris.c b/kernel/arch/sh/boards/board-polaris.c
new file mode 100644
index 000000000..37a08d094
--- /dev/null
+++ b/kernel/arch/sh/boards/board-polaris.c
@@ -0,0 +1,155 @@
+/*
+ * June 2006 Steve Glendinning <steve.glendinning@shawell.net>
+ *
+ * Polaris-specific resource declaration
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <cpu/gpio.h>
+#include <mach-se/mach/se.h>
+
+#define BCR2		(0xFFFFFF62)
+#define WCR2		(0xFFFFFF66)
+#define AREA5_WAIT_CTRL	(0x1C00)
+#define WAIT_STATES_10	(0x7)
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= PA_EXT5,
+		.end		= PA_EXT5 + 0x1fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= IRQ0_IRQ,
+		.end		= IRQ0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PORT_PCDR,
+	.end	= PORT_PCDR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct platform_device *polaris_devices[] __initdata = {
+	&smsc911x_device,
+	&heartbeat_device,
+};
+
+static int __init polaris_initialise(void)
+{
+	u16 wcr, bcr_mask;
+
+	printk(KERN_INFO "Configuring Polaris external bus\n");
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	/* Configure area 5 with 2 wait states */
+	wcr = __raw_readw(WCR2);
+	wcr &= (~AREA5_WAIT_CTRL);
+	wcr |= (WAIT_STATES_10 << 10);
+	__raw_writew(wcr, WCR2);
+
+	/* Configure area 5 for 32-bit access */
+	bcr_mask = __raw_readw(BCR2);
+	bcr_mask |= 1 << 10;
+	__raw_writew(bcr_mask, BCR2);
+
+	return platform_add_devices(polaris_devices,
+				    ARRAY_SIZE(polaris_devices));
+}
+arch_initcall(polaris_initialise);
+
+static struct ipr_data ipr_irq_table[] = {
+	/* External IRQs */
+	{ IRQ0_IRQ, 0,  0,  1, },	/* IRQ0 */
+	{ IRQ1_IRQ, 0,  4,  1, },	/* IRQ1 */
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "sh7709-ext",
+	},
+};
+
+static void __init init_polaris_irq(void)
+{
+	/* Disable all interrupts */
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
+
+static struct sh_machine_vector mv_polaris __initmv = {
+	.mv_name		= "Polaris",
+	.mv_init_irq		= init_polaris_irq,
+};
diff --git a/kernel/arch/sh/boards/board-secureedge5410.c b/kernel/arch/sh/boards/board-secureedge5410.c
new file mode 100644
index 000000000..98b36205a
--- /dev/null
+++ b/kernel/arch/sh/boards/board-secureedge5410.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <mach/secureedge5410.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+unsigned short secureedge5410_ioport;
+
+/*
+ * EraseConfig handling functions
+ */
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+	printk("SnapGear: erase switch interrupt!\n");
+
+	return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+	unsigned int irq = evt2irq(0x240);
+
+	printk("SnapGear: EraseConfig init\n");
+
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				irq);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				irq);
+	return 0;
+}
+module_init(eraseconfig_init);
+
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+static void __init init_snapgear_IRQ(void)
+{
+	printk("Setup SnapGear IRQ/IPR ...\n");
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_init_irq		= init_snapgear_IRQ,
+};
diff --git a/kernel/arch/sh/boards/board-sh2007.c b/kernel/arch/sh/boards/board-sh2007.c
new file mode 100644
index 000000000..1980bb7e5
--- /dev/null
+++ b/kernel/arch/sh/boards/board-sh2007.c
@@ -0,0 +1,145 @@
+/*
+ * SH-2007 board support.
+ *
+ * Copyright (C) 2003, 2004  SUGIOKA Toshinobu
+ * Copyright (C) 2010  Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <mach/sh2007.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
+};
+
+struct smsc911x_platform_config smc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct resource smsc9118_0_resources[] = {
+	[0] = {
+		.start	= SMC0_BASE,
+		.end	= SMC0_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource smsc9118_1_resources[] = {
+	[0] = {
+		.start	= SMC1_BASE,
+		.end	= SMC1_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x280),
+		.end	= evt2irq(0x280),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_0_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc9118_0_resources),
+	.resource	= smsc9118_0_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platform_device smsc9118_1_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(smsc9118_1_resources),
+	.resource	= smsc9118_1_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct resource cf_resources[] = {
+	[0] = {
+		.start	= CF_BASE + CF_OFFSET,
+		.end	= CF_BASE + CF_OFFSET + 0x0f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CF_BASE + CF_OFFSET + 0x206,
+		.end	= CF_BASE + CF_OFFSET + 0x20f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= evt2irq(0x2c0),
+		.end	= evt2irq(0x2c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_device  = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cf_resources),
+	.resource	= cf_resources,
+};
+
+static struct platform_device *sh2007_devices[] __initdata = {
+	&smsc9118_0_device,
+	&smsc9118_1_device,
+	&cf_device,
+};
+
+static int __init sh2007_io_init(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
+	return 0;
+}
+subsys_initcall(sh2007_io_init);
+
+static void __init sh2007_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init sh2007_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "SH-2007 Setup...");
+
+	/* setup wait control registers for area 5 */
+	__raw_writel(CS5BCR_D, CS5BCR);
+	__raw_writel(CS5WCR_D, CS5WCR);
+	__raw_writel(CS5PCR_D, CS5PCR);
+
+	printk(KERN_INFO " done.\n");
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2007 __initmv = {
+	.mv_setup		= sh2007_setup,
+	.mv_name		= "sh2007",
+	.mv_init_irq		= sh2007_init_irq,
+};
diff --git a/kernel/arch/sh/boards/board-sh7757lcr.c b/kernel/arch/sh/boards/board-sh7757lcr.c
new file mode 100644
index 000000000..324599bfa
--- /dev/null
+++ b/kernel/arch/sh/boards/board-sh7757lcr.c
@@ -0,0 +1,612 @@
+/*
+ * Renesas R0P7757LC0012RL Support.
+ *
+ * Copyright (C) 2009 - 2010  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/io.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <cpu/sh7757.h>
+#include <asm/heartbeat.h>
+
+static struct resource heartbeat_resource = {
+	.start	= 0xffec005c,	/* PUDR */
+	.end	= 0xffec005c,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.flags		= HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* Fast Ethernet */
+#define GBECONT		0xffc10100
+#define GBECONT_RMII1	BIT(17)
+#define GBECONT_RMII0	BIT(16)
+static void sh7757_eth_set_mdio_gate(void *addr)
+{
+	if (((unsigned long)addr & 0x00000fff) < 0x0800)
+		writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
+	else
+		writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
+}
+
+static struct resource sh_eth0_resources[] = {
+	{
+		.start  = 0xfef00000,
+		.end    = 0xfef001ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0xc80),
+		.end    = evt2irq(0xc80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth0_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
+};
+
+static struct platform_device sh7757_eth0_device = {
+	.name		= "sh7757-ether",
+	.resource	= sh_eth0_resources,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(sh_eth0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth0_pdata,
+	},
+};
+
+static struct resource sh_eth1_resources[] = {
+	{
+		.start  = 0xfef00800,
+		.end    = 0xfef009ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0xc80),
+		.end    = evt2irq(0xc80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth1_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_set_mdio_gate,
+};
+
+static struct platform_device sh7757_eth1_device = {
+	.name		= "sh7757-ether",
+	.resource	= sh_eth1_resources,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sh_eth1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth1_pdata,
+	},
+};
+
+static void sh7757_eth_giga_set_mdio_gate(void *addr)
+{
+	if (((unsigned long)addr & 0x00000fff) < 0x0800) {
+		gpio_set_value(GPIO_PTT4, 1);
+		writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
+	} else {
+		gpio_set_value(GPIO_PTT4, 0);
+		writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT);
+	}
+}
+
+static struct resource sh_eth_giga0_resources[] = {
+	{
+		.start  = 0xfee00000,
+		.end    = 0xfee007ff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x2960),
+		.end    = evt2irq(0x2960),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga0_pdata = {
+	.phy = 18,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga0_device = {
+	.name		= "sh7757-gether",
+	.resource	= sh_eth_giga0_resources,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga0_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga0_pdata,
+	},
+};
+
+static struct resource sh_eth_giga1_resources[] = {
+	{
+		.start  = 0xfee00800,
+		.end    = 0xfee00fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		/* TSU */
+		.start  = 0xfee01800,
+		.end    = 0xfee01fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x2980),
+		.end    = evt2irq(0x2980),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7757_eth_giga1_pdata = {
+	.phy = 19,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.set_mdio_gate = sh7757_eth_giga_set_mdio_gate,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII_ID,
+};
+
+static struct platform_device sh7757_eth_giga1_device = {
+	.name		= "sh7757-gether",
+	.resource	= sh_eth_giga1_resources,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(sh_eth_giga1_resources),
+	.dev		= {
+		.platform_data = &sh7757_eth_giga1_pdata,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.start	= 0xffcb0000,
+		.end	= 0xffcb00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1c60),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x1c80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0x0f,
+	.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI0 */
+static struct tmio_mmc_data sdhi_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI_RX,
+	.capabilities	= MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct resource sdhi_resources[] = {
+	[0] = {
+		.start  = 0xffe50000,
+		.end    = 0xffe500ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi_resources),
+	.resource       = sdhi_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi_info,
+	},
+};
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static struct renesas_usbhs_platform_info usb0_data = {
+	.platform_callback = {
+		.get_id = usbhs0_get_id,
+	},
+	.driver_param = {
+		.buswait_bwait = 5,
+	}
+};
+
+static struct resource usb0_resources[] = {
+	[0] = {
+		.start	= 0xfe450000,
+		.end	= 0xfe4501ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x840),
+		.end	= evt2irq(0x840),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb0_device = {
+	.name		= "renesas_usbhs",
+	.id		= 0,
+	.dev = {
+		.platform_data		= &usb0_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_resources),
+	.resource	= usb0_resources,
+};
+
+static struct platform_device *sh7757lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&sh7757_eth0_device,
+	&sh7757_eth1_device,
+	&sh7757_eth_giga0_device,
+	&sh7757_eth_giga1_device,
+	&sh_mmcif_device,
+	&sdhi_device,
+	&usb0_device,
+};
+
+static struct flash_platform_data spi_flash_data = {
+	.name = "m25p80",
+	.type = "m25px64",
+};
+
+static struct spi_board_info spi_board_info[] = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &spi_flash_data,
+	},
+};
+
+static int __init sh7757lcr_devices_setup(void)
+{
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* RGMII (PTA) */
+	gpio_request(GPIO_FN_ET0_MDC, NULL);
+	gpio_request(GPIO_FN_ET0_MDIO, NULL);
+	gpio_request(GPIO_FN_ET1_MDC, NULL);
+	gpio_request(GPIO_FN_ET1_MDIO, NULL);
+
+	/* ONFI (PTB, PTZ) */
+	gpio_request(GPIO_FN_ON_NRE, NULL);
+	gpio_request(GPIO_FN_ON_NWE, NULL);
+	gpio_request(GPIO_FN_ON_NWP, NULL);
+	gpio_request(GPIO_FN_ON_NCE0, NULL);
+	gpio_request(GPIO_FN_ON_R_B0, NULL);
+	gpio_request(GPIO_FN_ON_ALE, NULL);
+	gpio_request(GPIO_FN_ON_CLE, NULL);
+
+	gpio_request(GPIO_FN_ON_DQ7, NULL);
+	gpio_request(GPIO_FN_ON_DQ6, NULL);
+	gpio_request(GPIO_FN_ON_DQ5, NULL);
+	gpio_request(GPIO_FN_ON_DQ4, NULL);
+	gpio_request(GPIO_FN_ON_DQ3, NULL);
+	gpio_request(GPIO_FN_ON_DQ2, NULL);
+	gpio_request(GPIO_FN_ON_DQ1, NULL);
+	gpio_request(GPIO_FN_ON_DQ0, NULL);
+
+	/* IRQ8 to 0 (PTB, PTC) */
+	gpio_request(GPIO_FN_IRQ8, NULL);
+	gpio_request(GPIO_FN_IRQ7, NULL);
+	gpio_request(GPIO_FN_IRQ6, NULL);
+	gpio_request(GPIO_FN_IRQ5, NULL);
+	gpio_request(GPIO_FN_IRQ4, NULL);
+	gpio_request(GPIO_FN_IRQ3, NULL);
+	gpio_request(GPIO_FN_IRQ2, NULL);
+	gpio_request(GPIO_FN_IRQ1, NULL);
+	gpio_request(GPIO_FN_IRQ0, NULL);
+
+	/* SPI0 (PTD) */
+	gpio_request(GPIO_FN_SP0_MOSI, NULL);
+	gpio_request(GPIO_FN_SP0_MISO, NULL);
+	gpio_request(GPIO_FN_SP0_SCK, NULL);
+	gpio_request(GPIO_FN_SP0_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP0_SS0, NULL);
+	gpio_request(GPIO_FN_SP0_SS1, NULL);
+	gpio_request(GPIO_FN_SP0_SS2, NULL);
+	gpio_request(GPIO_FN_SP0_SS3, NULL);
+
+	/* RMII 0/1 (PTE, PTF) */
+	gpio_request(GPIO_FN_RMII0_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII0_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII0_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII0_RX_ER, NULL);
+	gpio_request(GPIO_FN_RMII1_CRS_DV, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_TXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_TXEN, NULL);
+	gpio_request(GPIO_FN_RMII1_REFCLK, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD1, NULL);
+	gpio_request(GPIO_FN_RMII1_RXD0, NULL);
+	gpio_request(GPIO_FN_RMII1_RX_ER, NULL);
+
+	/* eMMC (PTG) */
+	gpio_request(GPIO_FN_MMCCLK, NULL);
+	gpio_request(GPIO_FN_MMCCMD, NULL);
+	gpio_request(GPIO_FN_MMCDAT7, NULL);
+	gpio_request(GPIO_FN_MMCDAT6, NULL);
+	gpio_request(GPIO_FN_MMCDAT5, NULL);
+	gpio_request(GPIO_FN_MMCDAT4, NULL);
+	gpio_request(GPIO_FN_MMCDAT3, NULL);
+	gpio_request(GPIO_FN_MMCDAT2, NULL);
+	gpio_request(GPIO_FN_MMCDAT1, NULL);
+	gpio_request(GPIO_FN_MMCDAT0, NULL);
+
+	/* LPC (PTG, PTH, PTQ, PTU) */
+	gpio_request(GPIO_FN_SERIRQ, NULL);
+	gpio_request(GPIO_FN_LPCPD, NULL);
+	gpio_request(GPIO_FN_LDRQ, NULL);
+	gpio_request(GPIO_FN_WP, NULL);
+	gpio_request(GPIO_FN_FMS0, NULL);
+	gpio_request(GPIO_FN_LAD3, NULL);
+	gpio_request(GPIO_FN_LAD2, NULL);
+	gpio_request(GPIO_FN_LAD1, NULL);
+	gpio_request(GPIO_FN_LAD0, NULL);
+	gpio_request(GPIO_FN_LFRAME, NULL);
+	gpio_request(GPIO_FN_LRESET, NULL);
+	gpio_request(GPIO_FN_LCLK, NULL);
+	gpio_request(GPIO_FN_LGPIO7, NULL);
+	gpio_request(GPIO_FN_LGPIO6, NULL);
+	gpio_request(GPIO_FN_LGPIO5, NULL);
+	gpio_request(GPIO_FN_LGPIO4, NULL);
+
+	/* SPI1 (PTH) */
+	gpio_request(GPIO_FN_SP1_MOSI, NULL);
+	gpio_request(GPIO_FN_SP1_MISO, NULL);
+	gpio_request(GPIO_FN_SP1_SCK, NULL);
+	gpio_request(GPIO_FN_SP1_SCK_FB, NULL);
+	gpio_request(GPIO_FN_SP1_SS0, NULL);
+	gpio_request(GPIO_FN_SP1_SS1, NULL);
+
+	/* SDHI (PTI) */
+	gpio_request(GPIO_FN_SD_WP, NULL);
+	gpio_request(GPIO_FN_SD_CD, NULL);
+	gpio_request(GPIO_FN_SD_CLK, NULL);
+	gpio_request(GPIO_FN_SD_CMD, NULL);
+	gpio_request(GPIO_FN_SD_D3, NULL);
+	gpio_request(GPIO_FN_SD_D2, NULL);
+	gpio_request(GPIO_FN_SD_D1, NULL);
+	gpio_request(GPIO_FN_SD_D0, NULL);
+
+	/* SCIF3/4 (PTJ, PTW) */
+	gpio_request(GPIO_FN_RTS3, NULL);
+	gpio_request(GPIO_FN_CTS3, NULL);
+	gpio_request(GPIO_FN_TXD3, NULL);
+	gpio_request(GPIO_FN_RXD3, NULL);
+	gpio_request(GPIO_FN_RTS4, NULL);
+	gpio_request(GPIO_FN_RXD4, NULL);
+	gpio_request(GPIO_FN_TXD4, NULL);
+	gpio_request(GPIO_FN_CTS4, NULL);
+
+	/* SERMUX (PTK, PTL, PTO, PTV) */
+	gpio_request(GPIO_FN_COM2_TXD, NULL);
+	gpio_request(GPIO_FN_COM2_RXD, NULL);
+	gpio_request(GPIO_FN_COM2_RTS, NULL);
+	gpio_request(GPIO_FN_COM2_CTS, NULL);
+	gpio_request(GPIO_FN_COM2_DTR, NULL);
+	gpio_request(GPIO_FN_COM2_DSR, NULL);
+	gpio_request(GPIO_FN_COM2_DCD, NULL);
+	gpio_request(GPIO_FN_COM2_RI, NULL);
+	gpio_request(GPIO_FN_RAC_RXD, NULL);
+	gpio_request(GPIO_FN_RAC_RTS, NULL);
+	gpio_request(GPIO_FN_RAC_CTS, NULL);
+	gpio_request(GPIO_FN_RAC_DTR, NULL);
+	gpio_request(GPIO_FN_RAC_DSR, NULL);
+	gpio_request(GPIO_FN_RAC_DCD, NULL);
+	gpio_request(GPIO_FN_RAC_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_TXD, NULL);
+	gpio_request(GPIO_FN_COM1_RXD, NULL);
+	gpio_request(GPIO_FN_COM1_RTS, NULL);
+	gpio_request(GPIO_FN_COM1_CTS, NULL);
+
+	writeb(0x10, 0xfe470000);	/* SMR0: SerMux mode 0 */
+
+	/* IIC (PTM, PTR, PTS) */
+	gpio_request(GPIO_FN_SDA7, NULL);
+	gpio_request(GPIO_FN_SCL7, NULL);
+	gpio_request(GPIO_FN_SDA6, NULL);
+	gpio_request(GPIO_FN_SCL6, NULL);
+	gpio_request(GPIO_FN_SDA5, NULL);
+	gpio_request(GPIO_FN_SCL5, NULL);
+	gpio_request(GPIO_FN_SDA4, NULL);
+	gpio_request(GPIO_FN_SCL4, NULL);
+	gpio_request(GPIO_FN_SDA3, NULL);
+	gpio_request(GPIO_FN_SCL3, NULL);
+	gpio_request(GPIO_FN_SDA2, NULL);
+	gpio_request(GPIO_FN_SCL2, NULL);
+	gpio_request(GPIO_FN_SDA1, NULL);
+	gpio_request(GPIO_FN_SCL1, NULL);
+	gpio_request(GPIO_FN_SDA0, NULL);
+	gpio_request(GPIO_FN_SCL0, NULL);
+
+	/* USB (PTN) */
+	gpio_request(GPIO_FN_VBUS_EN, NULL);
+	gpio_request(GPIO_FN_VBUS_OC, NULL);
+
+	/* SGPIO1/0 (PTN, PTO) */
+	gpio_request(GPIO_FN_SGPIO1_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO1_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO1_DO, NULL);
+	gpio_request(GPIO_FN_SGPIO0_CLK, NULL);
+	gpio_request(GPIO_FN_SGPIO0_LOAD, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DI, NULL);
+	gpio_request(GPIO_FN_SGPIO0_DO, NULL);
+
+	/* WDT (PTN) */
+	gpio_request(GPIO_FN_SUB_CLKIN, NULL);
+
+	/* System (PTT) */
+	gpio_request(GPIO_FN_STATUS1, NULL);
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* PWMX (PTT) */
+	gpio_request(GPIO_FN_PWMX1, NULL);
+	gpio_request(GPIO_FN_PWMX0, NULL);
+
+	/* R-SPI (PTV) */
+	gpio_request(GPIO_FN_R_SPI_MOSI, NULL);
+	gpio_request(GPIO_FN_R_SPI_MISO, NULL);
+	gpio_request(GPIO_FN_R_SPI_RSPCK, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL0, NULL);
+	gpio_request(GPIO_FN_R_SPI_SSL1, NULL);
+
+	/* EVC (PTV, PTW) */
+	gpio_request(GPIO_FN_EVENT7, NULL);
+	gpio_request(GPIO_FN_EVENT6, NULL);
+	gpio_request(GPIO_FN_EVENT5, NULL);
+	gpio_request(GPIO_FN_EVENT4, NULL);
+	gpio_request(GPIO_FN_EVENT3, NULL);
+	gpio_request(GPIO_FN_EVENT2, NULL);
+	gpio_request(GPIO_FN_EVENT1, NULL);
+	gpio_request(GPIO_FN_EVENT0, NULL);
+
+	/* LED for heartbeat */
+	gpio_request(GPIO_PTU3, NULL);
+	gpio_direction_output(GPIO_PTU3, 1);
+	gpio_request(GPIO_PTU2, NULL);
+	gpio_direction_output(GPIO_PTU2, 1);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_direction_output(GPIO_PTU1, 1);
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* control for MDIO of Gigabit Ethernet */
+	gpio_request(GPIO_PTT4, NULL);
+	gpio_direction_output(GPIO_PTT4, 1);
+
+	/* control for eMMC */
+	gpio_request(GPIO_PTT7, NULL);		/* eMMC_RST# */
+	gpio_direction_output(GPIO_PTT7, 0);
+	gpio_request(GPIO_PTT6, NULL);		/* eMMC_INDEX# */
+	gpio_direction_output(GPIO_PTT6, 0);
+	gpio_request(GPIO_PTT5, NULL);		/* eMMC_PRST# */
+	gpio_direction_output(GPIO_PTT5, 1);
+
+	/* register SPI device information */
+	spi_register_board_info(spi_board_info,
+				ARRAY_SIZE(spi_board_info));
+
+	/* General platform */
+	return platform_add_devices(sh7757lcr_devices,
+				    ARRAY_SIZE(sh7757lcr_devices));
+}
+arch_initcall(sh7757lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7757lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+/* Initialize the board */
+static void __init sh7757lcr_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
+}
+
+static int sh7757lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S3 (Low active).
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN0;	/* Clock Mode: 1 */
+
+	return value;
+}
+
+/* The Machine Vector */
+static struct sh_machine_vector mv_sh7757lcr __initmv = {
+	.mv_name		= "SH7757LCR",
+	.mv_setup		= sh7757lcr_setup,
+	.mv_init_irq		= init_sh7757lcr_IRQ,
+	.mv_mode_pins		= sh7757lcr_mode_pins,
+};
+
diff --git a/kernel/arch/sh/boards/board-sh7785lcr.c b/kernel/arch/sh/boards/board-sh7785lcr.c
new file mode 100644
index 000000000..2c4771ee8
--- /dev/null
+++ b/kernel/arch/sh/boards/board-sh7785lcr.c
@@ -0,0 +1,378 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2009  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_intc.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <mach/sh7785lcr.h>
+#include <cpu/sh7785.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <asm/bl_bit.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resource = {
+	.start	= PLD_LEDCR,
+	.end	= PLD_LEDCR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= evt2irq(0x340),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_proto_resources[] = {
+	[0] = {
+		.start	= PCA9564_PROTO_32BIT_ADDR,
+		.end	= PCA9564_PROTO_32BIT_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= evt2irq(0x380),
+		.end	= evt2irq(0x380),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= evt2irq(0x380),
+		.end	= evt2irq(0x380),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= HZ,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	if (mach_is_sh7785lcr_pt()) {
+		i2c_device.resource = i2c_proto_resources;
+		i2c_device.num_resources = ARRAY_SIZE(i2c_proto_resources);
+	}
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+device_initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static int sh7785lcr_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
+static void sh7785lcr_power_off(void)
+{
+	unsigned char *p;
+
+	p = ioremap(PLD_POFCR, PLD_POFCR + 1);
+	if (!p) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+	*p = 0x01;
+	iounmap(p);
+	set_bl_bit();
+	while (1)
+		cpu_relax();
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+	if (!sm501_reg) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+
+	writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
+	iounmap(sm501_reg);
+}
+
+/* Return the board specific boot mode pin configuration */
+static int sh7785lcr_mode_pins(void)
+{
+	int value = 0;
+
+	/* These are the factory default settings of S1 and S2.
+	 * If you change these dip switches then you will need to
+	 * adjust the values below as well.
+	 */
+	value |= MODE_PIN4; /* Clock Mode 16 */
+	value |= MODE_PIN5; /* 32-bit Area0 bus width */
+	value |= MODE_PIN6; /* 32-bit Area0 bus width */
+	value |= MODE_PIN7; /* Area 0 SRAM interface [fixed] */
+	value |= MODE_PIN8; /* Little Endian */
+	value |= MODE_PIN9; /* Master Mode */
+	value |= MODE_PIN14; /* No PLL step-up */
+
+	return value;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_clk_init		= sh7785lcr_clk_init,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+	.mv_mode_pins		= sh7785lcr_mode_pins,
+};
+
diff --git a/kernel/arch/sh/boards/board-shmin.c b/kernel/arch/sh/boards/board-shmin.c
new file mode 100644
index 000000000..325bed53b
--- /dev/null
+++ b/kernel/arch/sh/boards/board-shmin.c
@@ -0,0 +1,34 @@
+/*
+ * arch/sh/boards/shmin/setup.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII
+ *
+ * SHMIN Support.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/machvec.h>
+#include <mach/shmin.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+#define PFC_PHCR	0xa400010eUL
+#define INTC_ICR1	0xa4000010UL
+
+static void __init init_shmin_irq(void)
+{
+	__raw_writew(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
+	__raw_writew(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static void __init shmin_setup(char **cmdline_p)
+{
+	__set_io_port_base(SHMIN_IO_BASE);
+}
+
+static struct sh_machine_vector mv_shmin __initmv = {
+	.mv_name	= "SHMIN",
+	.mv_setup	= shmin_setup,
+	.mv_init_irq	= init_shmin_irq,
+};
diff --git a/kernel/arch/sh/boards/board-titan.c b/kernel/arch/sh/boards/board-titan.c
new file mode 100644
index 000000000..94c36c7bc
--- /dev/null
+++ b/kernel/arch/sh/boards/board-titan.c
@@ -0,0 +1,24 @@
+/*
+ * arch/sh/boards/titan/setup.c - Setup for Titan
+ *
+ *  Copyright (C) 2006  Jamie Lenehan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <mach/titan.h>
+#include <asm/io.h>
+
+static void __init init_titan_irq(void)
+{
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static struct sh_machine_vector mv_titan __initmv = {
+	.mv_name	= "Titan",
+	.mv_init_irq	= init_titan_irq,
+};
diff --git a/kernel/arch/sh/boards/board-urquell.c b/kernel/arch/sh/boards/board-urquell.c
new file mode 100644
index 000000000..b52abcc52
--- /dev/null
+++ b/kernel/arch/sh/boards/board-urquell.c
@@ -0,0 +1,221 @@
+/*
+ * Renesas Technology Corp. SH7786 Urquell Support.
+ *
+ * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2009, 2010  Paul Mundt
+ *
+ * Based on board-sh7785lcr.c
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/sh_intc.h>
+#include <mach/urquell.h>
+#include <cpu/sh7786.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+#include <asm/smp-ops.h>
+
+/*
+ * bit  1234 5678
+ *----------------------------
+ * SW1  0101 0010  -> Pck 33MHz version
+ *     (1101 0010)    Pck 66MHz version
+ * SW2  0x1x xxxx  -> little endian
+ *                    29bit mode
+ * SW47 0001 1000  -> CS0 : on-board flash
+ *                    CS1 : SRAM, registers, LAN, PCMCIA
+ *                    38400 bps for SCIF1
+ *
+ * Address
+ * 0x00000000 - 0x04000000  (CS0)     Nor Flash
+ * 0x04000000 - 0x04200000  (CS1)     SRAM
+ * 0x05000000 - 0x05800000  (CS1)     on board register
+ * 0x05800000 - 0x06000000  (CS1)     LAN91C111
+ * 0x06000000 - 0x06400000  (CS1)     PCMCIA
+ * 0x08000000 - 0x10000000  (CS2-CS3) DDR3
+ * 0x10000000 - 0x14000000  (CS4)     PCIe
+ * 0x14000000 - 0x14800000  (CS5)     Core0 LRAM/URAM
+ * 0x14800000 - 0x15000000  (CS5)     Core1 LRAM/URAM
+ * 0x18000000 - 0x1C000000  (CS6)     ATA/NAND-Flash
+ * 0x1C000000 -             (CS7)     SH7786 Control register
+ */
+
+/* HeartBeat */
+static struct resource heartbeat_resource = {
+	.start	= BOARDREG(SLEDR),
+	.end	= BOARDREG(SLEDR),
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x05800300,
+		.end    = 0x0580030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x360),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* Nor Flash */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *urquell_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&nor_flash_device,
+};
+
+static int __init urquell_devices_setup(void)
+{
+	/* USB */
+	gpio_request(GPIO_FN_USB_OVC0,  NULL);
+	gpio_request(GPIO_FN_USB_PENC0, NULL);
+
+	/* enable LAN */
+	__raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
+		  UBOARDREG(IRL2MSKR));
+
+	return platform_add_devices(urquell_devices,
+				    ARRAY_SIZE(urquell_devices));
+}
+device_initcall(urquell_devices_setup);
+
+static void urquell_power_off(void)
+{
+	__raw_writew(0xa5a5, UBOARDREG(SRSTR));
+}
+
+static void __init urquell_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
+
+static int urquell_mode_pins(void)
+{
+	return __raw_readw(UBOARDREG(MDSWMR));
+}
+
+static int urquell_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * Only handle the EXTAL case, anyone interfacing a crystal
+	 * resonator will need to provide their own input clock.
+	 */
+	if (test_mode_pin(MODE_PIN9))
+		return -EINVAL;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	return ret;
+}
+
+/* Initialize the board */
+static void __init urquell_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
+
+	pm_power_off = urquell_power_off;
+
+	register_smp_ops(&shx3_smp_ops);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_urquell __initmv = {
+	.mv_name	= "Urquell",
+	.mv_setup	= urquell_setup,
+	.mv_init_irq	= urquell_init_irq,
+	.mv_mode_pins	= urquell_mode_pins,
+	.mv_clk_init	= urquell_clk_init,
+};
diff --git a/kernel/arch/sh/boards/mach-ap325rxa/Makefile b/kernel/arch/sh/boards/mach-ap325rxa/Makefile
new file mode 100644
index 000000000..4cf1774d2
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-ap325rxa/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o sdram.o
+
diff --git a/kernel/arch/sh/boards/mach-ap325rxa/sdram.S b/kernel/arch/sh/boards/mach-ap325rxa/sdram.S
new file mode 100644
index 000000000..db24fbed4
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-ap325rxa/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * AP325RXA sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ap325rxa_sdram_enter_start)
+
+	/* SBSC: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+ENTRY(ap325rxa_sdram_enter_end)
+
+	.balign 4
+ENTRY(ap325rxa_sdram_leave_start)
+
+	/* SBSC: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r0
+	mov.l   4f, r1
+	and	r1, r0
+	mov.l	r0, @r4
+	mov.l	6f, r4
+	mov.l	8f, r0
+	mov.l	@r4, r1
+	mov	#-1, r4
+	add	r4, r1
+	or	r1, r0
+	mov.l	7f, r1
+	mov.l	r0, @r1
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+4:	.long	0xfffffbff
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+ENTRY(ap325rxa_sdram_leave_end)
diff --git a/kernel/arch/sh/boards/mach-ap325rxa/setup.c b/kernel/arch/sh/boards/mach-ap325rxa/setup.c
new file mode 100644
index 000000000..cbd2a9f02
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-ap325rxa/setup.c
@@ -0,0 +1,696 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/sh_flctl.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <media/ov772x.h>
+#include <media/soc_camera.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+#include <asm/suspend.h>
+#include <cpu/sh7723.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+};
+
+static struct resource smsc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x660),
+		.end	= evt2irq(0x660),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc9118_resources),
+	.resource	= smsc9118_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+/*
+ * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
+ * If this area erased, this board can not boot.
+ */
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area0",
+		.offset = MTDPART_OFS_APPEND,
+		.size = ((7 * 1024 * 1024) + (512 * 1024)),
+	}, {
+		.name = "CPLD-Data",
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+		.size = (1024 * 128 * 2),
+	}, {
+		.name = "free-area1",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+static struct mtd_partition nand_partition_info[] = {
+	{
+		.name	= "nand_data",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct resource nand_flash_resources[] = {
+	[0] = {
+		.start	= 0xa4530000,
+		.end	= 0xa45300ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct sh_flctl_platform_data nand_flash_data = {
+	.parts		= nand_partition_info,
+	.nr_parts	= ARRAY_SIZE(nand_partition_info),
+	.flcmncr_val	= FCKSEL_E | TYPESEL_SET | NANWF_E,
+	.has_hwecc	= 1,
+};
+
+static struct platform_device nand_flash_device = {
+	.name		= "sh_flctl",
+	.resource	= nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(nand_flash_resources),
+	.dev		= {
+		.platform_data = &nand_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_MSELCRB	0xA4050182
+#define PORT_HIZCRC	0xA405015C
+#define PORT_DRVCRA	0xA405018A
+#define PORT_DRVCRB	0xA405018C
+
+static int ap320_wvga_set_brightness(int brightness)
+{
+	if (brightness) {
+		gpio_set_value(GPIO_PTS3, 0);
+		__raw_writew(0x100, FPGA_BKLREG);
+	} else {
+		__raw_writew(0, FPGA_BKLREG);
+		gpio_set_value(GPIO_PTS3, 1);
+	}
+
+	return 0;
+}
+
+static void ap320_wvga_power_on(void)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
+}
+
+static void ap320_wvga_power_off(void)
+{
+	/* ASD AP-320/325 LCD OFF */
+	__raw_writew(0, FPGA_LCDREG);
+}
+
+static const struct fb_videomode ap325rxa_lcdc_modes[] = {
+	{
+		.name = "LB070WV1",
+		.xres = 800,
+		.yres = 480,
+		.left_margin = 32,
+		.right_margin = 160,
+		.hsync_len = 8,
+		.upper_margin = 63,
+		.lower_margin = 80,
+		.vsync_len = 1,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_modes = ap325rxa_lcdc_modes,
+		.num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes),
+		.panel_cfg = {
+			.width = 152,	/* 7.0 inch */
+			.height = 91,
+			.display_on = ap320_wvga_power_on,
+			.display_off = ap320_wvga_power_off,
+		},
+		.bl_info = {
+			.name = "sh_mobile_lcdc_bl",
+			.max_brightness = 1,
+			.set_brightness = ap320_wvga_set_brightness,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static void camera_power(int val)
+{
+	gpio_set_value(GPIO_PTZ5, val); /* RST_CAM/RSTB */
+	mdelay(10);
+}
+
+#ifdef CONFIG_I2C
+/* support for the old ncm03j camera */
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_probe(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret;
+
+	if (!a)
+		return -ENODEV;
+
+	camera_power(1);
+	msg.addr = 0x6e;
+	msg.buf = camera_ncm03j_magic;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	camera_power(0);
+
+	return ret;
+}
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	camera_power(0);
+	if (!enable)
+		return 0; /* no disable for now */
+
+	camera_power(1);
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static int ap325rxa_camera_add(struct soc_camera_device *icd);
+static void ap325rxa_camera_del(struct soc_camera_device *icd);
+
+static struct soc_camera_platform_info camera_info = {
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.code = MEDIA_BUS_FMT_UYVY8_2X8,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.field = V4L2_FIELD_NONE,
+		.width = 640,
+		.height = 480,
+	},
+	.mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+	V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+	V4L2_MBUS_DATA_ACTIVE_HIGH,
+	.mbus_type = V4L2_MBUS_PARALLEL,
+	.set_capture = camera_set_capture,
+};
+
+static struct soc_camera_link camera_link = {
+	.bus_id		= 0,
+	.add_device	= ap325rxa_camera_add,
+	.del_device	= ap325rxa_camera_del,
+	.module_name	= "soc_camera_platform",
+	.priv		= &camera_info,
+};
+
+static struct platform_device *camera_device;
+
+static void ap325rxa_camera_release(struct device *dev)
+{
+	soc_camera_platform_release(&camera_device);
+}
+
+static int ap325rxa_camera_add(struct soc_camera_device *icd)
+{
+	int ret = soc_camera_platform_add(icd, &camera_device, &camera_link,
+					  ap325rxa_camera_release, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = camera_probe();
+	if (ret < 0)
+		soc_camera_platform_del(icd, camera_device, &camera_link);
+
+	return ret;
+}
+
+static void ap325rxa_camera_del(struct soc_camera_device *icd)
+{
+	soc_camera_platform_del(icd, camera_device, &camera_link);
+}
+#endif /* CONFIG_I2C */
+
+static int ov7725_power(struct device *dev, int mode)
+{
+	camera_power(0);
+	if (mode)
+		camera_power(1);
+
+	return 0;
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct resource sdhi0_cn3_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0x04ce0000,
+		.end	= 0x04ce00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sdhi0_cn3_data = {
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi0_cn3_device = {
+	.name		= "sh_mobile_sdhi",
+	.id             = 0, /* "sdhi0" clock */
+	.num_resources	= ARRAY_SIZE(sdhi0_cn3_resources),
+	.resource	= sdhi0_cn3_resources,
+	.dev = {
+		.platform_data = &sdhi0_cn3_data,
+	},
+};
+
+static struct resource sdhi1_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0x04cf0000,
+		.end	= 0x04cf00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sdhi1_cn7_data = {
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi1_cn7_device = {
+	.name		= "sh_mobile_sdhi",
+	.id             = 1, /* "sdhi1" clock */
+	.num_resources	= ARRAY_SIZE(sdhi1_cn7_resources),
+	.resource	= sdhi1_cn7_resources,
+	.dev = {
+		.platform_data = &sdhi1_cn7_data,
+	},
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
+};
+
+static struct i2c_board_info ap325rxa_i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+	},
+};
+
+static struct ov772x_camera_info ov7725_info = {
+	.flags		= OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+	.edgectrl	= OV772X_AUTO_EDGECTRL(0xf, 0),
+};
+
+static struct soc_camera_link ov7725_link = {
+	.bus_id		= 0,
+	.power		= ov7725_power,
+	.board_info	= &ap325rxa_i2c_camera[0],
+	.i2c_adapter_id	= 0,
+	.priv		= &ov7725_info,
+};
+
+static struct platform_device ap325rxa_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &camera_link,
+		},
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smsc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+	&nand_flash_device,
+	&sdhi0_cn3_device,
+	&sdhi1_cn7_device,
+	&ap325rxa_camera[0],
+	&ap325rxa_camera[1],
+};
+
+extern char ap325rxa_sdram_enter_start;
+extern char ap325rxa_sdram_enter_end;
+extern char ap325rxa_sdram_leave_start;
+extern char ap325rxa_sdram_leave_end;
+
+static int __init ap325rxa_devices_setup(void)
+{
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&ap325rxa_sdram_enter_start,
+					&ap325rxa_sdram_enter_end,
+					&ap325rxa_sdram_leave_start,
+					&ap325rxa_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	/* LD3 and LD4 LEDs */
+	gpio_request(GPIO_PTX5, NULL); /* RUN */
+	gpio_direction_output(GPIO_PTX5, 1);
+	gpio_export(GPIO_PTX5, 0);
+
+	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
+	gpio_direction_output(GPIO_PTX4, 0);
+	gpio_export(GPIO_PTX4, 0);
+
+	/* SW1 input */
+	gpio_request(GPIO_PTF7, NULL); /* MODE */
+	gpio_direction_input(GPIO_PTF7);
+	gpio_export(GPIO_PTF7, 0);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+
+	/* LCD backlight */
+	gpio_request(GPIO_PTS3, NULL);
+	gpio_direction_output(GPIO_PTS3, 1);
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTZ7, NULL);
+	gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
+	gpio_request(GPIO_PTZ6, NULL);
+	gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
+	gpio_request(GPIO_PTZ5, NULL);
+	gpio_direction_output(GPIO_PTZ5, 0); /* RST_CAM */
+	gpio_request(GPIO_PTZ4, NULL);
+	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
+
+	__raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+
+	/* FLCTL */
+	gpio_request(GPIO_FN_FCE, NULL);
+	gpio_request(GPIO_FN_NAF7, NULL);
+	gpio_request(GPIO_FN_NAF6, NULL);
+	gpio_request(GPIO_FN_NAF5, NULL);
+	gpio_request(GPIO_FN_NAF4, NULL);
+	gpio_request(GPIO_FN_NAF3, NULL);
+	gpio_request(GPIO_FN_NAF2, NULL);
+	gpio_request(GPIO_FN_NAF1, NULL);
+	gpio_request(GPIO_FN_NAF0, NULL);
+	gpio_request(GPIO_FN_FCDE, NULL);
+	gpio_request(GPIO_FN_FOE, NULL);
+	gpio_request(GPIO_FN_FSC, NULL);
+	gpio_request(GPIO_FN_FWE, NULL);
+	gpio_request(GPIO_FN_FRB, NULL);
+
+	__raw_writew(0, PORT_HIZCRC);
+	__raw_writew(0xFFFF, PORT_DRVCRA);
+	__raw_writew(0xFFFF, PORT_DRVCRB);
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	/* SDHI0 - CN3 - SD CARD */
+	gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
+
+	/* SDHI1 - CN7 - MICRO SD CARD */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+arch_initcall(ap325rxa_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int ap325rxa_mode_pins(void)
+{
+	/* MD0=0, MD1=0, MD2=0: Clock Mode 0
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN5 | MODE_PIN8;
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_mode_pins = ap325rxa_mode_pins,
+};
diff --git a/kernel/arch/sh/boards/mach-cayman/Makefile b/kernel/arch/sh/boards/mach-cayman/Makefile
new file mode 100644
index 000000000..00fa3eaec
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-cayman/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for the Hitachi Cayman specific parts of the kernel
+#
+obj-y := setup.o irq.o panic.o
diff --git a/kernel/arch/sh/boards/mach-cayman/irq.c b/kernel/arch/sh/boards/mach-cayman/irq.c
new file mode 100644
index 000000000..724e8b727
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-cayman/irq.c
@@ -0,0 +1,157 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+};
+
+static void enable_cayman_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = __raw_readl(reg);
+	mask |= bit;
+	__raw_writel(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void disable_cayman_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = __raw_readl(reg);
+	mask &= ~bit;
+	__raw_writel(mask, reg);
+	local_irq_restore(flags);
+}
+
+struct irq_chip cayman_irq_type = {
+	.name		= "Cayman-IRQ",
+	.irq_unmask	= enable_cayman_irq,
+	.irq_mask	= disable_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = __raw_readl(EPLD_STATUS_BASE) &
+			 __raw_readl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = (unsigned long)ioremap_nocache(EPLD_BASE, 1024);
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i = 0; i < NR_EXT_IRQS; i++) {
+		irq_set_chip_and_handler(START_EXT_IRQS + i,
+					 &cayman_irq_type, handle_level_irq);
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/kernel/arch/sh/boards/mach-cayman/panic.c b/kernel/arch/sh/boards/mach-cayman/panic.c
new file mode 100644
index 000000000..d1e67306d
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-cayman/panic.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2003  Richard Curnow, SuperH UK Limited
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <cpu/registers.h>
+
+/* THIS IS A PHYSICAL ADDRESS */
+#define HDSP2534_ADDR (0x04002100)
+
+static void poor_mans_delay(void)
+{
+	int i;
+
+	for (i = 0; i < 2500000; i++)
+		cpu_relax();
+}
+
+static void show_value(unsigned long x)
+{
+	int i;
+	unsigned nibble;
+	for (i = 0; i < 8; i++) {
+		nibble = ((x >> (i * 4)) & 0xf);
+
+		__raw_writeb(nibble + ((nibble > 9) ? 55 : 48),
+			  HDSP2534_ADDR + 0xe0 + ((7 - i) << 2));
+	}
+}
+
+void
+panic_handler(unsigned long panicPC, unsigned long panicSSR,
+	      unsigned long panicEXPEVT)
+{
+	while (1) {
+		/* This piece of code displays the PC on the LED display */
+		show_value(panicPC);
+		poor_mans_delay();
+		show_value(panicSSR);
+		poor_mans_delay();
+		show_value(panicEXPEVT);
+		poor_mans_delay();
+	}
+}
diff --git a/kernel/arch/sh/boards/mach-cayman/setup.c b/kernel/arch/sh/boards/mach-cayman/setup.c
new file mode 100644
index 000000000..340fd40b3
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-cayman/setup.c
@@ -0,0 +1,186 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = (unsigned long)ioremap_nocache(SMSC_SUPERIO_BASE, 1024);
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+device_initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};
diff --git a/kernel/arch/sh/boards/mach-dreamcast/Makefile b/kernel/arch/sh/boards/mach-dreamcast/Makefile
new file mode 100644
index 000000000..7b97546c7
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-dreamcast/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Sega Dreamcast specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o rtc.o
+
diff --git a/kernel/arch/sh/boards/mach-dreamcast/irq.c b/kernel/arch/sh/boards/mach-dreamcast/irq.c
new file mode 100644
index 000000000..2789647ab
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-dreamcast/irq.c
@@ -0,0 +1,156 @@
+/*
+ * arch/sh/boards/dreamcast/irq.c
+ *
+ * Holly IRQ support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ * Released under the terms of the GNU GPL v2.0
+ */
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <mach/sysasic.h>
+
+/*
+ * Dreamcast System ASIC Hardware Events -
+ *
+ * The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+ * hardware events from system peripherals and triggering an SH7750 IRQ.
+ * Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+ * set in the Event Mask Registers (EMRs).  When a hardware event is
+ * triggered, its corresponding bit in the Event Status Registers (ESRs)
+ * is set, and that bit should be rewritten to the ESR to acknowledge that
+ * event.
+ *
+ * There are three 32-bit ESRs located at 0xa05f6900 - 0xa05f6908.  Event
+ * types can be found in arch/sh/include/mach-dreamcast/mach/sysasic.h.
+ * There are three groups of EMRs that parallel the ESRs.  Each EMR group
+ * corresponds to an IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13,
+ * 0xa05f6920 - 0xa05f6928 triggers IRQ 11, and 0xa05f6930 - 0xa05f6938
+ * triggers IRQ 9.
+ *
+ * In the kernel, these events are mapped to virtual IRQs so that drivers can
+ * respond to them as they would a normal interrupt.  In order to keep this
+ * mapping simple, the events are mapped as:
+ *
+ * 6900/6910 - Events  0-31, IRQ 13
+ * 6904/6924 - Events 32-63, IRQ 11
+ * 6908/6938 - Events 64-95, IRQ  9
+ *
+ */
+
+#define ESR_BASE 0x005f6900    /* Base event status register */
+#define EMR_BASE 0x005f6910    /* Base event mask register */
+
+/*
+ * Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+ * 1 = 0x6920, 2 = 0x6930; also determine the event offset.
+ */
+#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
+
+/* Return the hardware event's bit position within the EMR/ESR */
+#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
+
+/*
+ * For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+ * (logically mapped to the corresponding bit for the hardware event).
+ */
+
+/* Disable the hardware event by masking its bit in its EMR */
+static inline void disable_systemasic_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
+
+	mask = inl(emr);
+	mask &= ~(1 << EVENT_BIT(irq));
+	outl(mask, emr);
+}
+
+/* Enable the hardware event by setting its bit in its EMR */
+static inline void enable_systemasic_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	__u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+	__u32 mask;
+
+	mask = inl(emr);
+	mask |= (1 << EVENT_BIT(irq));
+	outl(mask, emr);
+}
+
+/* Acknowledge a hardware event by writing its bit back to its ESR */
+static void mask_ack_systemasic_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	__u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+	disable_systemasic_irq(data);
+	outl((1 << EVENT_BIT(irq)), esr);
+}
+
+struct irq_chip systemasic_int = {
+	.name		= "System ASIC",
+	.irq_mask	= disable_systemasic_irq,
+	.irq_mask_ack	= mask_ack_systemasic_irq,
+	.irq_unmask	= enable_systemasic_irq,
+};
+
+/*
+ * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
+ */
+int systemasic_irq_demux(int irq)
+{
+	__u32 emr, esr, status, level;
+	__u32 j, bit;
+
+	switch (irq) {
+	case 13:
+		level = 0;
+		break;
+	case 11:
+		level = 1;
+		break;
+	case  9:
+		level = 2;
+		break;
+	default:
+		return irq;
+	}
+	emr = EMR_BASE + (level << 4) + (level << 2);
+	esr = ESR_BASE + (level << 2);
+
+	/* Mask the ESR to filter any spurious, unwanted interrupts */
+	status = inl(esr);
+	status &= inl(emr);
+
+	/* Now scan and find the first set bit as the event to map */
+	for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+		if (status & bit) {
+			irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+			return irq;
+		}
+	}
+
+	/* Not reached */
+	return irq;
+}
+
+void systemasic_irq_init(void)
+{
+	int irq_base, i;
+
+	irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE,
+				   HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1);
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs\n", __func__);
+		return;
+	}
+
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+		irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq);
+}
diff --git a/kernel/arch/sh/boards/mach-dreamcast/rtc.c b/kernel/arch/sh/boards/mach-dreamcast/rtc.c
new file mode 100644
index 000000000..061d65714
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-dreamcast/rtc.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/boards/dreamcast/rtc.c
+ *
+ * Dreamcast AICA RTC routines.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+
+#include <linux/time.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+
+/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
+   seconds) to get the standard Unix Epoch when getting the time, and add
+   20 years when setting the time. */
+#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
+
+/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
+   registers.*/
+#define AICA_RTC_SECS_H		0xa0710000
+#define AICA_RTC_SECS_L		0xa0710004
+
+/**
+ * aica_rtc_gettimeofday - Get the time from the AICA RTC
+ * @ts: pointer to resulting timespec
+ *
+ * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
+ */
+static void aica_rtc_gettimeofday(struct timespec *ts)
+{
+	unsigned long val1, val2;
+
+	do {
+		val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	ts->tv_sec = val1 - TWENTY_YEARS;
+
+	/* Can't get nanoseconds with just a seconds counter. */
+	ts->tv_nsec = 0;
+}
+
+/**
+ * aica_rtc_settimeofday - Set the AICA RTC to the current time
+ * @secs: contains the time_t to set
+ *
+ * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
+ */
+static int aica_rtc_settimeofday(const time_t secs)
+{
+	unsigned long val1, val2;
+	unsigned long adj = secs + TWENTY_YEARS;
+
+	do {
+		__raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+		__raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
+
+		val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(__raw_readl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	return 0;
+}
+
+void aica_time_init(void)
+{
+	rtc_sh_get_time = aica_rtc_gettimeofday;
+	rtc_sh_set_time = aica_rtc_settimeofday;
+}
+
diff --git a/kernel/arch/sh/boards/mach-dreamcast/setup.c b/kernel/arch/sh/boards/mach-dreamcast/setup.c
new file mode 100644
index 000000000..ad1a4db72
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-dreamcast/setup.c
@@ -0,0 +1,41 @@
+/*
+ * arch/sh/boards/dreamcast/setup.c
+ *
+ * Hardware support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
+ *	SEGA Dreamcast support
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+#include <asm/machvec.h>
+#include <mach/sysasic.h>
+
+static void __init dreamcast_setup(char **cmdline_p)
+{
+	board_time_init = aica_time_init;
+}
+
+static struct sh_machine_vector mv_dreamcast __initmv = {
+	.mv_name		= "Sega Dreamcast",
+	.mv_setup		= dreamcast_setup,
+	.mv_irq_demux		= systemasic_irq_demux,
+	.mv_init_irq		= systemasic_irq_init,
+};
diff --git a/kernel/arch/sh/boards/mach-ecovec24/Makefile b/kernel/arch/sh/boards/mach-ecovec24/Makefile
new file mode 100644
index 000000000..e69bc8220
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-ecovec24/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the R0P7724LC0011/21RL (EcoVec)
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+obj-y	 := setup.o sdram.o
\ No newline at end of file
diff --git a/kernel/arch/sh/boards/mach-ecovec24/sdram.S b/kernel/arch/sh/boards/mach-ecovec24/sdram.S
new file mode 100644
index 000000000..3963c6f23
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-ecovec24/sdram.S
@@ -0,0 +1,111 @@
+/*
+ * Ecovec24 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ecovec24_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ecovec24_sdram_enter_end)
+
+	.balign 4
+ENTRY(ecovec24_sdram_leave_start)
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+
+ENTRY(ecovec24_sdram_leave_end)
diff --git a/kernel/arch/sh/boards/mach-ecovec24/setup.c b/kernel/arch/sh/boards/mach-ecovec24/setup.c
new file mode 100644
index 000000000..d531791f0
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-ecovec24/setup.c
@@ -0,0 +1,1450 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mfd/tmio.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_msiof.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/platform_data/gpio_backlight.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/videodev2.h>
+#include <video/sh_mobile_lcdc.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
+#include <media/tw9910.h>
+#include <media/mt9t112.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <asm/suspend.h>
+#include <cpu/sh7724.h>
+
+/*
+ *  Address      Interface        BusWidth
+ *-----------------------------------------
+ *  0x0000_0000  uboot            16bit
+ *  0x0004_0000  Linux romImage   16bit
+ *  0x0014_0000  MTD for Linux    16bit
+ *  0x0400_0000  Internal I/O     16/32bit
+ *  0x0800_0000  DRAM             32bit
+ *  0x1800_0000  MFI              16bit
+ */
+
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect  ON     : write protect
+ *                                  OFF    : No write protect
+ * DS2[2] = RMII / TS, SCIF         ON     : RMII
+ *                                  OFF    : TS, SCIF3
+ * DS2[3] = Camera / Video          ON     : Camera
+ *                                  OFF    : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock          ON     : On board OSC
+ *                                  OFF    : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD              ON-OFF : SD
+ *                                  OFF-ON : MMC
+ */
+
+/*
+ * FSI - DA7210
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set 'HeadPhone' 80
+ * amixer set 'Out Mixer Left DAC Left' on
+ * amixer set 'Out Mixer Right DAC Right' on
+ */
+
+/* Heartbeat */
+static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.nr_bits = 4,
+	.bit_pos = led_pos,
+};
+
+static struct resource heartbeat_resource = {
+	.start  = 0xA405012C, /* PTG */
+	.end    = 0xA405012E - 1,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "boot loader",
+		.offset = 0,
+		.size = (5 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x03ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* SH Eth */
+#define SH_ETH_ADDR	(0xA4600000)
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = evt2irq(0xd60),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8700 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+	.ether_link_active_low = 1
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh7724-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+/* USB0 host */
+static void usb0_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB4, power);
+}
+
+static struct r8a66597_platdata usb0_host_data = {
+	.on_chip = 1,
+	.port_power = usb0_port_power,
+};
+
+static struct resource usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb0_host_resources),
+	.resource	= usb0_host_resources,
+};
+
+/* USB1 host/function */
+static void usb1_port_power(int port, int power)
+{
+	gpio_set_value(GPIO_PTB5, power);
+}
+
+static struct r8a66597_platdata usb1_common_data = {
+	.on_chip = 1,
+	.port_power = usb1_port_power,
+};
+
+static struct resource usb1_common_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device usb1_common_device = {
+	/* .name will be added in arch_setup */
+	.id		= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_common_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_common_resources),
+	.resource	= usb1_common_resources,
+};
+
+/*
+ * USBHS
+ */
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return gpio_get_value(GPIO_PTB3);
+}
+
+static int usbhs_phy_reset(struct platform_device *pdev)
+{
+	/* enable vbus if HOST */
+	if (!gpio_get_value(GPIO_PTB3))
+		gpio_set_value(GPIO_PTB5, 1);
+
+	return 0;
+}
+
+static struct renesas_usbhs_platform_info usbhs_info = {
+	.platform_callback = {
+		.get_id		= usbhs_get_id,
+		.phy_reset	= usbhs_phy_reset,
+	},
+	.driver_param = {
+		.buswait_bwait		= 4,
+		.detection_delay	= 5,
+		.d0_tx_id = SHDMA_SLAVE_USB1D0_TX,
+		.d0_rx_id = SHDMA_SLAVE_USB1D0_RX,
+		.d1_tx_id = SHDMA_SLAVE_USB1D1_TX,
+		.d1_rx_id = SHDMA_SLAVE_USB1D1_RX,
+	},
+};
+
+static struct resource usbhs_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhs_device = {
+	.name	= "renesas_usbhs",
+	.id	= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbhs_info,
+	},
+	.num_resources	= ARRAY_SIZE(usbhs_resources),
+	.resource	= usbhs_resources,
+};
+
+/* LCDC and backlight */
+static const struct fb_videomode ecovec_lcd_modes[] = {
+	{
+		.name		= "Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0, /* hsync and vsync are active low */
+	},
+};
+
+static const struct fb_videomode ecovec_dvi_modes[] = {
+	{
+		.name		= "DVI",
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync = 0, /* hsync and vsync are active low */
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.ch[0] = {
+		.interface_type = RGB18,
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+	.fbdev = &lcdc_device.dev,
+	.gpio = GPIO_PTR1,
+	.def_value = 1,
+	.name = "backlight",
+};
+
+static struct platform_device gpio_backlight_device = {
+	.name = "gpio-backlight",
+	.dev = {
+		.platform_data = &gpio_backlight_data,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x9e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+};
+
+/* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("da7210", 0x1a),
+	},
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("lis3lv02d", 0x1c),
+		.irq = evt2irq(0x620),
+	}
+};
+
+/* KEYSC */
+static struct sh_keysc_info keysc_info = {
+	.mode		= SH_KEYSC_MODE_1,
+	.scan_timing	= 3,
+	.delay		= 50,
+	.kycr2_delay	= 100,
+	.keycodes	= { KEY_1, 0, 0, 0, 0,
+			    KEY_2, 0, 0, 0, 0,
+			    KEY_3, 0, 0, 0, 0,
+			    KEY_4, 0, 0, 0, 0,
+			    KEY_5, 0, 0, 0, 0,
+			    KEY_6, 0, 0, 0, 0, },
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* keysc0 clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* TouchScreen */
+#define IRQ0 evt2irq(0x600)
+
+static int ts_get_pendown_state(struct device *dev)
+{
+	int val = 0;
+	gpio_free(GPIO_FN_INTC_IRQ0);
+	gpio_request(GPIO_PTZ0, NULL);
+	gpio_direction_input(GPIO_PTZ0);
+
+	val = gpio_get_value(GPIO_PTZ0);
+
+	gpio_free(GPIO_PTZ0);
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+	return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	return 0;
+}
+
+static struct tsc2007_platform_data tsc2007_info = {
+	.model			= 2007,
+	.x_plate_ohms		= 180,
+	.get_pendown_state	= ts_get_pendown_state,
+	.init_platform_hw	= ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+	I2C_BOARD_INFO("tsc2007", 0x48),
+	.type		= "tsc2007",
+	.platform_data	= &tsc2007_info,
+	.irq		= IRQ0,
+};
+
+static struct regulator_consumer_supply cn12_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data cn12_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(cn12_power_consumers),
+	.consumer_supplies      = cn12_power_consumers,
+};
+
+static struct fixed_voltage_config cn12_power_info = {
+	.supply_name = "CN12 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.gpio = GPIO_PTB7,
+	.enable_high = 1,
+	.init_data = &cn12_power_init_data,
+};
+
+static struct platform_device cn12_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 0,
+	.dev  = {
+		.platform_data = &cn12_power_info,
+	},
+};
+
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+/* SDHI0 */
+static struct regulator_consumer_supply sdhi0_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data sdhi0_power_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = ARRAY_SIZE(sdhi0_power_consumers),
+	.consumer_supplies      = sdhi0_power_consumers,
+};
+
+static struct fixed_voltage_config sdhi0_power_info = {
+	.supply_name = "CN11 SD/MMC Vdd",
+	.microvolts = 3300000,
+	.gpio = GPIO_PTB6,
+	.enable_high = 1,
+	.init_data = &sdhi0_power_init_data,
+};
+
+static struct platform_device sdhi0_power = {
+	.name = "reg-fixed-voltage",
+	.id   = 1,
+	.dev  = {
+		.platform_data = &sdhi0_power_info,
+	},
+};
+
+static struct tmio_mmc_data sdhi0_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+	.flags		= TMIO_MMC_USE_GPIO_CD,
+	.cd_gpio	= GPIO_PTY7,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi0_resources),
+	.resource       = sdhi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SDHI1 */
+static struct tmio_mmc_data sdhi1_info = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD |
+			  MMC_CAP_NEEDS_POLL,
+	.flags		= TMIO_MMC_USE_GPIO_CD,
+	.cd_gpio	= GPIO_PTW7,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(sdhi1_resources),
+	.resource       = sdhi1_resources,
+	.id             = 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+#endif /* CONFIG_MMC_SH_MMCIF */
+
+#else
+
+/* MMC SPI */
+static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
+{
+	gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
+}
+
+static struct mmc_spi_platform_data mmc_spi_info = {
+	.caps = MMC_CAP_NEEDS_POLL,
+	.caps2 = MMC_CAP2_RO_ACTIVE_HIGH,
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
+	.setpower = mmc_spi_setpower,
+	.flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO,
+	.cd_gpio = GPIO_PTY7,
+	.ro_gpio = GPIO_PTY6,
+};
+
+static struct spi_board_info spi_bus[] = {
+	{
+		.modalias	= "mmc_spi",
+		.platform_data	= &mmc_spi_info,
+		.max_speed_hz	= 5000000,
+		.mode		= SPI_MODE_0,
+		.controller_data = (void *) GPIO_PTM4,
+	},
+};
+
+/* MSIOF0 */
+static struct sh_msiof_spi_info msiof0_data = {
+	.num_chipselect = 1,
+};
+
+static struct resource msiof0_resources[] = {
+	[0] = {
+		.name	= "MSIOF0",
+		.start	= 0xa4c40000,
+		.end	= 0xa4c40063,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xc80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device msiof0_device = {
+	.name		= "spi_sh_msiof",
+	.id		= 0, /* MSIOF0 */
+	.dev = {
+		.platform_data = &msiof0_data,
+	},
+	.num_resources	= ARRAY_SIZE(msiof0_resources),
+	.resource	= msiof0_resources,
+};
+
+#endif
+
+/* I2C Video/Camera */
+static struct i2c_board_info i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+	},
+	{
+		/* 1st camera */
+		I2C_BOARD_INFO("mt9t112", 0x3c),
+	},
+	{
+		/* 2nd camera */
+		I2C_BOARD_INFO("mt9t112", 0x3c),
+	},
+};
+
+/* tw9910 */
+static int tw9910_power(struct device *dev, int mode)
+{
+	int val = mode ? 0 : 1;
+
+	gpio_set_value(GPIO_PTU2, val);
+	if (mode)
+		mdelay(100);
+
+	return 0;
+}
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.mpout		= TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+	.i2c_adapter_id	= 0,
+	.bus_id		= 1,
+	.power		= tw9910_power,
+	.board_info	= &i2c_camera[0],
+	.priv		= &tw9910_info,
+};
+
+/* mt9t112 */
+static int mt9t112_power1(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_PTA3, mode);
+	if (mode)
+		mdelay(100);
+
+	return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info1 = {
+	.flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link1 = {
+	.i2c_adapter_id	= 0,
+	.power		= mt9t112_power1,
+	.bus_id		= 0,
+	.board_info	= &i2c_camera[1],
+	.priv		= &mt9t112_info1,
+};
+
+static int mt9t112_power2(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_PTA4, mode);
+	if (mode)
+		mdelay(100);
+
+	return 0;
+}
+
+static struct mt9t112_camera_info mt9t112_info2 = {
+	.flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
+	.divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
+};
+
+static struct soc_camera_link mt9t112_link2 = {
+	.i2c_adapter_id	= 1,
+	.power		= mt9t112_power2,
+	.bus_id		= 1,
+	.board_info	= &i2c_camera[2],
+	.priv		= &mt9t112_info2,
+};
+
+static struct platform_device camera_devices[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &tw9910_link,
+		},
+	},
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &mt9t112_link1,
+		},
+	},
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 2,
+		.dev	= {
+			.platform_data = &mt9t112_link2,
+		},
+	},
+};
+
+/* FSI */
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xf80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+};
+
+static struct asoc_simple_card_info fsi_da7210_info = {
+	.name		= "DA7210",
+	.card		= "FSIB-DA7210",
+	.codec		= "da7210.0-001a",
+	.platform	= "sh_fsi.0",
+	.daifmt		= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_dai = {
+		.name	= "fsib-dai",
+	},
+	.codec_dai = {
+		.name	= "da7210-hifi",
+	},
+};
+
+static struct platform_device fsi_da7210_device = {
+	.name	= "asoc-simple-card",
+	.dev	= {
+		.platform_data	= &fsi_da7210_info,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.dma_mask = &fsi_da7210_device.dev.coherent_dma_mask,
+	},
+};
+
+
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/ak881x.h>
+#include <media/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x8e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+};
+
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "SH_MMCIF",
+		.start	= 0xA4CA0000,
+		.end	= 0xA4CA00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC2I */
+		.start	= evt2irq(0x5a0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC3I */
+		.start	= evt2irq(0x5c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0, /* SH7724: Max Pclk/2 */
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.ocr		= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+#endif
+
+static struct platform_device *ecovec_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&sh_eth_device,
+	&usb0_host_device,
+	&usb1_common_device,
+	&usbhs_device,
+	&lcdc_device,
+	&gpio_backlight_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+	&cn12_power,
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	&sdhi0_power,
+	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sdhi1_device,
+#endif
+#else
+	&msiof0_device,
+#endif
+	&camera_devices[0],
+	&camera_devices[1],
+	&camera_devices[2],
+	&fsi_device,
+	&fsi_da7210_device,
+	&irda_device,
+	&vou_device,
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	&sh_mmcif_device,
+#endif
+};
+
+#ifdef CONFIG_I2C
+#define EEPROM_ADDR 0x50
+static u8 mac_read(struct i2c_adapter *a, u8 command)
+{
+	struct i2c_msg msg[2];
+	u8 buf;
+	int ret;
+
+	msg[0].addr  = EEPROM_ADDR;
+	msg[0].flags = 0;
+	msg[0].len   = 1;
+	msg[0].buf   = &command;
+
+	msg[1].addr  = EEPROM_ADDR;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len   = 1;
+	msg[1].buf   = &buf;
+
+	ret = i2c_transfer(a, msg, 2);
+	if (ret < 0) {
+		printk(KERN_ERR "error %d\n", ret);
+		buf = 0xff;
+	}
+
+	return buf;
+}
+
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	struct i2c_adapter *a = i2c_get_adapter(1);
+	int i;
+
+	if (!a) {
+		pr_err("can not get I2C 1\n");
+		return;
+	}
+
+	/* read MAC address from EEPROM */
+	for (i = 0; i < sizeof(pd->mac_addr); i++) {
+		pd->mac_addr[i] = mac_read(a, 0x10 + i);
+		msleep(10);
+	}
+
+	i2c_put_adapter(a);
+}
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+	pr_err("unable to read sh_eth MAC address\n");
+}
+#endif
+
+#define PORT_HIZA 0xA4050158
+#define IODRIVEA  0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
+static int __init arch_setup(void)
+{
+	struct clk *clk;
+	bool cn12_enabled = false;
+
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&ecovec24_sdram_enter_start,
+					&ecovec24_sdram_enter_end,
+					&ecovec24_sdram_leave_start,
+					&ecovec24_sdram_leave_end);
+
+	/* enable STATUS0, STATUS2 and PDSTATUS */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+	gpio_request(GPIO_FN_STATUS2, NULL);
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+
+	/* enable debug LED */
+	gpio_request(GPIO_PTG0, NULL);
+	gpio_request(GPIO_PTG1, NULL);
+	gpio_request(GPIO_PTG2, NULL);
+	gpio_request(GPIO_PTG3, NULL);
+	gpio_direction_output(GPIO_PTG0, 0);
+	gpio_direction_output(GPIO_PTG1, 0);
+	gpio_direction_output(GPIO_PTG2, 0);
+	gpio_direction_output(GPIO_PTG3, 0);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+
+	/* enable SH-Eth */
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_output(GPIO_PTA1, 1);
+	mdelay(20);
+
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_FN_LNKSTA,       NULL);
+
+	/* enable USB */
+	__raw_writew(0x0000, 0xA4D80000);
+	__raw_writew(0x0000, 0xA4D90000);
+	gpio_request(GPIO_PTB3,  NULL);
+	gpio_request(GPIO_PTB4,  NULL);
+	gpio_request(GPIO_PTB5,  NULL);
+	gpio_direction_input(GPIO_PTB3);
+	gpio_direction_output(GPIO_PTB4, 0);
+	gpio_direction_output(GPIO_PTB5, 0);
+	__raw_writew(0x0600, 0xa40501d4);
+	__raw_writew(0x0600, 0xa4050192);
+
+	if (gpio_get_value(GPIO_PTB3)) {
+		printk(KERN_INFO "USB1 function is selected\n");
+		usb1_common_device.name = "r8a66597_udc";
+	} else {
+		printk(KERN_INFO "USB1 host is selected\n");
+		usb1_common_device.name = "r8a66597_hcd";
+	}
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	gpio_request(GPIO_PTE6, NULL);
+	gpio_request(GPIO_PTU1, NULL);
+	gpio_request(GPIO_PTA2, NULL);
+	gpio_direction_input(GPIO_PTE6);
+	gpio_direction_output(GPIO_PTU1, 0);
+	gpio_direction_output(GPIO_PTA2, 0);
+
+	/* I/O buffer drive ability is high */
+	__raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+
+	if (gpio_get_value(GPIO_PTE6)) {
+		/* DVI */
+		lcdc_info.clock_source			= LCDC_CLK_EXTERNAL;
+		lcdc_info.ch[0].clock_divider		= 1;
+		lcdc_info.ch[0].lcd_modes		= ecovec_dvi_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_dvi_modes);
+
+		/* No backlight */
+		gpio_backlight_data.fbdev = NULL;
+
+		gpio_set_value(GPIO_PTA2, 1);
+		gpio_set_value(GPIO_PTU1, 1);
+	} else {
+		/* Panel */
+		lcdc_info.clock_source			= LCDC_CLK_PERIPHERAL;
+		lcdc_info.ch[0].clock_divider		= 2;
+		lcdc_info.ch[0].lcd_modes		= ecovec_lcd_modes;
+		lcdc_info.ch[0].num_modes		= ARRAY_SIZE(ecovec_lcd_modes);
+
+		/* FIXME
+		 *
+		 * LCDDON control is needed for Panel,
+		 * but current sh_mobile_lcdc driver doesn't control it.
+		 * It is temporary correspondence
+		 */
+		gpio_request(GPIO_PTF4, NULL);
+		gpio_direction_output(GPIO_PTF4, 1);
+
+		/* enable TouchScreen */
+		i2c_register_board_info(0, &ts_i2c_clients, 1);
+		irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
+	}
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+
+	/* enable user debug switch */
+	gpio_request(GPIO_PTR0, NULL);
+	gpio_request(GPIO_PTR4, NULL);
+	gpio_request(GPIO_PTR5, NULL);
+	gpio_request(GPIO_PTR6, NULL);
+	gpio_direction_input(GPIO_PTR0);
+	gpio_direction_input(GPIO_PTR4);
+	gpio_direction_input(GPIO_PTR5);
+	gpio_direction_input(GPIO_PTR6);
+
+	/* SD-card slot CN11 */
+#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
+	gpio_request(GPIO_FN_SDHI0WP,  NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0D3,  NULL);
+	gpio_request(GPIO_FN_SDHI0D2,  NULL);
+	gpio_request(GPIO_FN_SDHI0D1,  NULL);
+	gpio_request(GPIO_FN_SDHI0D0,  NULL);
+#else
+	/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
+	gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
+	gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
+	gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
+	gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
+	gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
+	gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
+	gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
+
+	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+#endif
+
+	/* MMC/SD-card slot CN12 */
+#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE)
+	/* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
+	gpio_request(GPIO_FN_MMC_D7, NULL);
+	gpio_request(GPIO_FN_MMC_D6, NULL);
+	gpio_request(GPIO_FN_MMC_D5, NULL);
+	gpio_request(GPIO_FN_MMC_D4, NULL);
+	gpio_request(GPIO_FN_MMC_D3, NULL);
+	gpio_request(GPIO_FN_MMC_D2, NULL);
+	gpio_request(GPIO_FN_MMC_D1, NULL);
+	gpio_request(GPIO_FN_MMC_D0, NULL);
+	gpio_request(GPIO_FN_MMC_CLK, NULL);
+	gpio_request(GPIO_FN_MMC_CMD, NULL);
+
+	cn12_enabled = true;
+#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
+	/* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
+	gpio_request(GPIO_FN_SDHI1WP,  NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+	gpio_request(GPIO_FN_SDHI1D3,  NULL);
+	gpio_request(GPIO_FN_SDHI1D2,  NULL);
+	gpio_request(GPIO_FN_SDHI1D1,  NULL);
+	gpio_request(GPIO_FN_SDHI1D0,  NULL);
+
+	cn12_enabled = true;
+#endif
+
+	if (cn12_enabled)
+		/* I/O buffer drive ability is high for CN12 */
+		__raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000,
+			     IODRIVEA);
+
+	/* enable Video */
+	gpio_request(GPIO_PTU2, NULL);
+	gpio_direction_output(GPIO_PTU2, 1);
+
+	/* enable Camera */
+	gpio_request(GPIO_PTA3, NULL);
+	gpio_request(GPIO_PTA4, NULL);
+	gpio_direction_output(GPIO_PTA3, 0);
+	gpio_direction_output(GPIO_PTA4, 0);
+
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKB,    NULL);
+	gpio_request(GPIO_FN_FSIIBSD,    NULL);
+	gpio_request(GPIO_FN_FSIOBSD,    NULL);
+	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI B */
+	clk = clk_get(NULL, "fsib_clk");
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimckb_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimckb_clk);
+		clk_set_rate(clk, 48000);
+		clk_put(clk);
+	}
+
+	gpio_request(GPIO_PTU0, NULL);
+	gpio_direction_output(GPIO_PTU0, 0);
+	mdelay(20);
+
+	/* enable motion sensor */
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_direction_input(GPIO_FN_INTC_IRQ1);
+
+	/* set VPU clock to 166 MHz */
+	clk = clk_get(NULL, "vpu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 166000000));
+		clk_put(clk);
+	}
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+	gpio_request(GPIO_PTU5, NULL);
+	gpio_direction_output(GPIO_PTU5, 0);
+
+	/* enable I2C device */
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	/* AK8813 power / reset sequence */
+	gpio_request(GPIO_PTG4, NULL);
+	gpio_request(GPIO_PTU3, NULL);
+	/* Reset */
+	gpio_direction_output(GPIO_PTG4, 0);
+	/* Power down */
+	gpio_direction_output(GPIO_PTU3, 1);
+
+	udelay(10);
+
+	/* Power up, reset */
+	gpio_set_value(GPIO_PTU3, 0);
+
+	udelay(10);
+
+	/* Remove reset */
+	gpio_set_value(GPIO_PTG4, 1);
+#endif
+
+	return platform_add_devices(ecovec_devices,
+				    ARRAY_SIZE(ecovec_devices));
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	sh_eth_init(&sh_eth_plat);
+	return 0;
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ecovec __initmv = {
+	.mv_name	= "R0P7724 (EcoVec)",
+};
diff --git a/kernel/arch/sh/boards/mach-highlander/Kconfig b/kernel/arch/sh/boards/mach-highlander/Kconfig
new file mode 100644
index 000000000..def49cc0a
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/Kconfig
@@ -0,0 +1,25 @@
+if SH_HIGHLANDER
+
+choice
+	prompt "Highlander options"
+	default SH_R7780MP
+
+config SH_R7780RP
+	bool "R7780RP-1 board support"
+	depends on CPU_SUBTYPE_SH7780
+
+config SH_R7780MP
+	bool "R7780MP board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the mass-production
+	  version of the R7780RP. If in doubt, say Y.
+
+config SH_R7785RP
+	bool "R7785RP board support"
+	depends on CPU_SUBTYPE_SH7785
+	select ARCH_REQUIRE_GPIOLIB
+
+endchoice
+
+endif
diff --git a/kernel/arch/sh/boards/mach-highlander/Makefile b/kernel/arch/sh/boards/mach-highlander/Makefile
new file mode 100644
index 000000000..d93aaf880
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Highlander specific parts of the kernel
+#
+obj-y				:= setup.o
+obj-$(CONFIG_SH_R7780RP)	+= irq-r7780rp.o
+obj-$(CONFIG_SH_R7780MP)	+= irq-r7780mp.o
+obj-$(CONFIG_SH_R7785RP)	+= irq-r7785rp.o pinmux-r7785rp.o
+
+ifneq ($(CONFIG_SH_R7785RP),y)
+obj-$(CONFIG_PUSH_SWITCH)	+= psw.o
+endif
diff --git a/kernel/arch/sh/boards/mach-highlander/irq-r7780mp.c b/kernel/arch/sh/boards/mach-highlander/irq-r7780mp.c
new file mode 100644
index 000000000..9893fd3a1
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -0,0 +1,74 @@
+/*
+ * Renesas Solutions Highlander R7780MP Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2007  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/highlander.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	CF,		/* Compact Flash */
+	TP,		/* Touch panel */
+	SCIF1,		/* FPGA SCIF1 */
+	SCIF0,		/* FPGA SCIF0 */
+	SMBUS,		/* SMBUS */
+	RTC,		/* RTC Alarm */
+	AX88796,	/* Ethernet controller */
+	PSW,		/* Push Switch */
+
+	/* external bus connector */
+	EXT1, EXT2, EXT4, EXT5, EXT6,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(SCIF1, IRQ_SCIF1),
+	INTC_IRQ(SCIF0, IRQ_SCIF0),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(RTC, IRQ_RTC),
+	INTC_IRQ(AX88796, IRQ_AX88796),
+	INTC_IRQ(PSW, IRQ_PSW),
+
+	INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4000000, 0, 16, /* IRLMSK */
+	  { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
+	    0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
+	IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
+	IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
+	0, IRQ_AX88796, IRQ_PSW,
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_plat_irq_setup(void)
+{
+	if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
+		printk(KERN_INFO "Using r7780mp interrupt controller.\n");
+		register_intc_controller(&intc_desc);
+		return irl2irq;
+	}
+
+	return NULL;
+}
diff --git a/kernel/arch/sh/boards/mach-highlander/irq-r7780rp.c b/kernel/arch/sh/boards/mach-highlander/irq-r7780rp.c
new file mode 100644
index 000000000..0805b2151
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -0,0 +1,67 @@
+/*
+ * Renesas Solutions Highlander R7780RP-1 Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006  Paul Mundt
+ * Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/highlander.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+
+	AX88796,          /* Ethernet controller */
+	PSW,              /* Push Switch */
+	CF,               /* Compact Flash */
+
+	PCI_A,
+	PCI_B,
+	PCI_C,
+	PCI_D,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */
+	INTC_IRQ(PCI_B, 66),
+	INTC_IRQ(PCI_C, 67),
+	INTC_IRQ(PCI_D, 68),
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(PSW, IRQ_PSW),
+	INTC_IRQ(AX88796, IRQ_AX88796),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa5000000, 0, 16, /* IRLMSK */
+	  { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0,
+	    0, 0, 0, 0, 0, 0, PSW, AX88796 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	65, 66, 67, 68,
+	IRQ_CF, 0, 0, 0,
+	0, 0, 0, 0,
+	IRQ_AX88796, IRQ_PSW
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_plat_irq_setup(void)
+{
+	if (__raw_readw(0xa5000600)) {
+		printk(KERN_INFO "Using r7780rp interrupt controller.\n");
+		register_intc_controller(&intc_desc);
+		return irl2irq;
+	}
+
+	return NULL;
+}
diff --git a/kernel/arch/sh/boards/mach-highlander/irq-r7785rp.c b/kernel/arch/sh/boards/mach-highlander/irq-r7785rp.c
new file mode 100644
index 000000000..558b24862
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -0,0 +1,86 @@
+/*
+ * Renesas Solutions Highlander R7785RP Support.
+ *
+ * Copyright (C) 2002  Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2006 - 2008  Paul Mundt
+ * Copyright (C) 2007  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/highlander.h>
+
+enum {
+	UNUSED = 0,
+
+	/* FPGA specific interrupt sources */
+	CF,		/* Compact Flash */
+	SMBUS,		/* SMBUS */
+	TP,		/* Touch panel */
+	RTC,		/* RTC Alarm */
+	TH_ALERT,	/* Temperature sensor */
+	AX88796,	/* Ethernet controller */
+
+	/* external bus connector */
+	EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(CF, IRQ_CF),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(RTC, IRQ_RTC),
+	INTC_IRQ(TH_ALERT, IRQ_TH_ALERT),
+
+	INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1),
+	INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3),
+
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7),
+
+	INTC_IRQ(AX88796, IRQ_AX88796),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4000010, 0, 16, /* IRLMCR1 */
+	  { 0, 0, 0, 0, CF, AX88796, SMBUS, TP,
+	    RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } },
+	{ 0xa4000012, 0, 16, /* IRLMCR2 */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } },
+};
+
+static unsigned char irl2irq[HL_NR_IRL] __initdata = {
+	0, IRQ_CF, IRQ_EXT4, IRQ_EXT5,
+	IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP,
+	IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0,
+	IRQ_EXT1, IRQ_EXT2, IRQ_EXT3,
+};
+
+static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
+			 NULL, mask_registers, NULL, NULL);
+
+unsigned char * __init highlander_plat_irq_setup(void)
+{
+	if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
+		return NULL;
+
+	printk(KERN_INFO "Using r7785rp interrupt controller.\n");
+
+	__raw_writew(0x0000, PA_IRLSSR1);	/* FPGA IRLSSR1(CF_CD clear) */
+
+	/* Setup the FPGA IRL */
+	__raw_writew(0x0000, PA_IRLPRA);	/* FPGA IRLA */
+	__raw_writew(0xe598, PA_IRLPRB);	/* FPGA IRLB */
+	__raw_writew(0x7060, PA_IRLPRC);	/* FPGA IRLC */
+	__raw_writew(0x0000, PA_IRLPRD);	/* FPGA IRLD */
+	__raw_writew(0x4321, PA_IRLPRE);	/* FPGA IRLE */
+	__raw_writew(0xdcba, PA_IRLPRF);	/* FPGA IRLF */
+
+	register_intc_controller(&intc_desc);
+	return irl2irq;
+}
diff --git a/kernel/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/kernel/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
new file mode 100644
index 000000000..c77a2bea8
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/pinmux-r7785rp.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <cpu/sh7785.h>
+
+void __init highlander_plat_pinmux_setup(void)
+{
+	/* SCIF0 */
+	gpio_request(GPIO_FN_SCIF0_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_RTS, NULL);
+	gpio_request(GPIO_FN_SCIF0_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF0_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF0_TXD, NULL);
+}
diff --git a/kernel/arch/sh/boards/mach-highlander/psw.c b/kernel/arch/sh/boards/mach-highlander/psw.c
new file mode 100644
index 000000000..522786318
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach/highlander.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int l, mask;
+	int ret = 0;
+
+	l = __raw_readw(PA_DBSW);
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	mask = l & 0x70;
+	/* Figure out who raised it */
+	if (mask & (1 << psw_info->bit)) {
+		psw->state = !!(mask & (1 << psw_info->bit));
+		if (psw->state)	/* debounce */
+			mod_timer(&psw->debounce, jiffies + 50);
+
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	l |= (0x7 << 12);
+	__raw_writew(l, PA_DBSW);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+	[0] = {
+		.start	= IRQ_PSW,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+	.name		= "s2",
+	.bit		= 6,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s2_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+	.name		= "s3",
+	.bit		= 5,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s3_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+	.name		= "s4",
+	.bit		= 4,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s4_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/kernel/arch/sh/boards/mach-highlander/setup.c b/kernel/arch/sh/boards/mach-highlander/setup.c
new file mode 100644
index 000000000..4a52590fe
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-highlander/setup.c
@@ -0,0 +1,419 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/setup.c
+ *
+ * Renesas Solutions Highlander Support.
+ *
+ * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005 - 2008 Paul Mundt
+ *
+ * This contains support for the R7780RP-1, R7780MP, and R7785RP
+ * Highlander modules.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/types.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
+#include <linux/clkdev.h>
+#include <net/ax88796.h>
+#include <asm/machvec.h>
+#include <mach/highlander.h>
+#include <asm/clock.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/io_trapped.h>
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0xA4200000,
+		.end	= 0xA42000FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EXT1,		/* irq number */
+		.end	= IRQ_EXT1,
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0xb0000000,
+		.end	= 0xb00000FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		.start	= IRQ_EXT4,		/* irq number */
+		.end	= IRQ_EXT4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_AREA5_IO + 0x1000,
+		.end	= PA_AREA5_IO + 0x1000 + 0x08 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PA_AREA5_IO + 0x80c,
+		.end	= PA_AREA5_IO + 0x80c + 0x16 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_CF,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device  = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev	= {
+		.platform_data	= &pata_info,
+	},
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OBLED,
+		.end	= PA_OBLED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+#ifndef CONFIG_SH_R7785RP
+static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+#endif
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+
+	/* R7785RP has a slightly more sensible FPGA.. */
+#ifndef CONFIG_SH_R7785RP
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+#endif
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct ax_plat_data ax88796_platdata = {
+	.flags          = AXFLG_HAS_93CX6,
+	.wordlength     = 2,
+	.dcr_val        = 0x1,
+	.rcr_val        = 0x40,
+};
+
+static struct resource ax88796_resources[] = {
+	{
+#ifdef CONFIG_SH_R7780RP
+		.start  = 0xa5800400,
+		.end    = 0xa5800400 + (0x20 * 0x2) - 1,
+#else
+		.start  = 0xa4100400,
+		.end    = 0xa4100400 + (0x20 * 0x2) - 1,
+#endif
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.start  = IRQ_AX88796,
+		.end    = IRQ_AX88796,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ax88796_device = {
+	.name           = "ax88796",
+	.id             = 0,
+
+	.dev    = {
+		.platform_data = &ax88796_platdata,
+	},
+
+	.num_resources  = ARRAY_SIZE(ax88796_resources),
+	.resource       = ax88796_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+/* This config is flash board for mass production. */
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= PA_NORFLASH_ADDR,
+		.end	= PA_NORFLASH_ADDR + PA_NORFLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource smbus_resources[] = {
+	[0] = {
+		.start	= PA_SMCR,
+		.end	= PA_SMCR + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SMBUS,
+		.end	= IRQ_SMBUS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smbus_device = {
+	.name		= "i2c-highlander",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smbus_resources),
+	.resource	= smbus_resources,
+};
+
+static struct i2c_board_info __initdata highlander_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static struct platform_device *r7780rp_devices[] __initdata = {
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+	&heartbeat_device,
+	&smbus_device,
+	&nor_flash_device,
+#ifndef CONFIG_SH_R7780RP
+	&ax88796_device,
+#endif
+};
+
+/*
+ * The CF is connected using a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+	.resource		= cf_ide_resources,
+	.num_resources		= 2,
+	.minimum_bus_width	= 16,
+};
+
+static int __init r7780rp_devices_setup(void)
+{
+	int ret = 0;
+
+#ifndef CONFIG_SH_R7780RP
+	if (register_trapped_io(&cf_trapped_io) == 0)
+		ret |= platform_device_register(&cf_ide_device);
+#endif
+
+	ret |= platform_add_devices(r7780rp_devices,
+				    ARRAY_SIZE(r7780rp_devices));
+
+	ret |= i2c_register_board_info(0, highlander_i2c_devices,
+				       ARRAY_SIZE(highlander_i2c_devices));
+
+	return ret;
+}
+device_initcall(r7780rp_devices_setup);
+
+/*
+ * Platform specific clocks
+ */
+static int ivdr_clk_enable(struct clk *clk)
+{
+	__raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
+	return 0;
+}
+
+static void ivdr_clk_disable(struct clk *clk)
+{
+	__raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
+}
+
+static struct sh_clk_ops ivdr_clk_ops = {
+	.enable		= ivdr_clk_enable,
+	.disable	= ivdr_clk_disable,
+};
+
+static struct clk ivdr_clk = {
+	.ops		= &ivdr_clk_ops,
+};
+
+static struct clk *r7780rp_clocks[] = {
+	&ivdr_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),
+};
+
+static void r7780rp_power_off(void)
+{
+	if (mach_is_r7780mp() || mach_is_r7785rp())
+		__raw_writew(0x0001, PA_POFF);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init highlander_setup(char **cmdline_p)
+{
+	u16 ver = __raw_readw(PA_VERREG);
+	int i;
+
+	printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
+			 mach_is_r7780rp() ? "R7780RP-1" :
+			 mach_is_r7780mp() ? "R7780MP"	 :
+					     "R7785RP");
+
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d)\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf);
+
+	highlander_plat_pinmux_setup();
+
+	/*
+	 * Enable the important clocks right away..
+	 */
+	for (i = 0; i < ARRAY_SIZE(r7780rp_clocks); i++) {
+		struct clk *clk = r7780rp_clocks[i];
+
+		clk_register(clk);
+		clk_enable(clk);
+	}
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	__raw_writew(0x0000, PA_OBLED);	/* Clear LED. */
+
+	if (mach_is_r7780rp())
+		__raw_writew(0x0001, PA_SDPOW);	/* SD Power ON */
+
+	__raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
+
+	pm_power_off = r7780rp_power_off;
+}
+
+static unsigned char irl2irq[HL_NR_IRL];
+
+static int highlander_irq_demux(int irq)
+{
+	if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
+		return irq;
+
+	return irl2irq[irq];
+}
+
+static void __init highlander_init_irq(void)
+{
+	unsigned char *ucp = highlander_plat_irq_setup();
+
+	if (ucp) {
+		plat_irq_setup_pins(IRQ_MODE_IRL3210);
+		memcpy(irl2irq, ucp, HL_NR_IRL);
+	}
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_highlander __initmv = {
+	.mv_name		= "Highlander",
+	.mv_setup		= highlander_setup,
+	.mv_init_irq		= highlander_init_irq,
+	.mv_irq_demux		= highlander_irq_demux,
+};
diff --git a/kernel/arch/sh/boards/mach-hp6xx/Makefile b/kernel/arch/sh/boards/mach-hp6xx/Makefile
new file mode 100644
index 000000000..b31242782
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-hp6xx/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the HP6xx specific parts of the kernel
+#
+
+obj-y			:= setup.o
+obj-$(CONFIG_PM)	+= pm.o pm_wakeup.o
+obj-$(CONFIG_APM_EMULATION)	+= hp6xx_apm.o
diff --git a/kernel/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/kernel/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
new file mode 100644
index 000000000..865d8d6e8
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -0,0 +1,111 @@
+/*
+ * bios-less APM driver for hp680
+ *
+ * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/apm-emulation.h>
+#include <linux/io.h>
+#include <asm/adc.h>
+#include <mach/hp6xx.h>
+
+/* percentage values */
+#define APM_CRITICAL			10
+#define APM_LOW				30
+
+/* resonably sane values */
+#define HP680_BATTERY_MAX		898
+#define HP680_BATTERY_MIN		486
+#define HP680_BATTERY_AC_ON		1023
+
+#define MODNAME "hp6x0_apm"
+
+#define PGDR	0xa400012c
+
+static void hp6x0_apm_get_power_status(struct apm_power_info *info)
+{
+	int battery, backup, charging, percentage;
+	u8 pgdr;
+
+	battery		= adc_single(ADC_CHANNEL_BATTERY);
+	backup		= adc_single(ADC_CHANNEL_BACKUP);
+	charging	= adc_single(ADC_CHANNEL_CHARGE);
+
+	percentage = 100 * (battery - HP680_BATTERY_MIN) /
+			   (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+
+	/* % of full battery */
+	info->battery_life = percentage;
+
+	/* We want our estimates in minutes */
+	info->units = 0;
+
+	/* Extremely(!!) rough estimate, we will replace this with a datalist later on */
+	info->time = (2 * battery);
+
+	info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
+			 APM_AC_ONLINE : APM_AC_OFFLINE;
+
+	pgdr = __raw_readb(PGDR);
+	if (pgdr & PGDR_MAIN_BATTERY_OUT) {
+		info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
+		info->battery_flag	= 0x80;
+	} else if (charging < 8) {
+		info->battery_status	= APM_BATTERY_STATUS_CHARGING;
+		info->battery_flag	= 0x08;
+		info->ac_line_status	= 0x01;
+	} else if (percentage <= APM_CRITICAL) {
+		info->battery_status	= APM_BATTERY_STATUS_CRITICAL;
+		info->battery_flag	= 0x04;
+	} else if (percentage <= APM_LOW) {
+		info->battery_status	= APM_BATTERY_STATUS_LOW;
+		info->battery_flag	= 0x02;
+	} else {
+		info->battery_status	= APM_BATTERY_STATUS_HIGH;
+		info->battery_flag	= 0x01;
+	}
+}
+
+static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
+{
+	if (!APM_DISABLED)
+		apm_queue_event(APM_USER_SUSPEND);
+
+	return IRQ_HANDLED;
+}
+
+static int __init hp6x0_apm_init(void)
+{
+	int ret;
+
+	ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt,
+			  0, MODNAME, NULL);
+	if (unlikely(ret < 0)) {
+		printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
+		       HP680_BTN_IRQ);
+		return ret;
+	}
+
+	apm_get_power_status = hp6x0_apm_get_power_status;
+
+	return ret;
+}
+
+static void __exit hp6x0_apm_exit(void)
+{
+	free_irq(HP680_BTN_IRQ, 0);
+}
+
+module_init(hp6x0_apm_init);
+module_exit(hp6x0_apm_exit);
+
+MODULE_AUTHOR("Adriy Skulysh");
+MODULE_DESCRIPTION("hp6xx Advanced Power Management");
+MODULE_LICENSE("GPL");
diff --git a/kernel/arch/sh/boards/mach-hp6xx/pm.c b/kernel/arch/sh/boards/mach-hp6xx/pm.c
new file mode 100644
index 000000000..8b50cf763
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-hp6xx/pm.c
@@ -0,0 +1,158 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/bl_bit.h>
+#include <mach/hp6xx.h>
+#include <cpu/dac.h>
+#include <asm/freq.h>
+#include <asm/watchdog.h>
+
+#define INTR_OFFSET	0x600
+
+#define STBCR		0xffffff82
+#define STBCR2		0xffffff88
+
+#define STBCR_STBY	0x80
+#define STBCR_MSTP2	0x04
+
+#define MCR		0xffffff68
+#define RTCNT		0xffffff70
+
+#define MCR_RMODE	2
+#define MCR_RFSH	4
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+static void pm_enter(void)
+{
+	u8 stbcr, csr;
+	u16 frqcr, mcr;
+	u32 vbr_new, vbr_old;
+
+	set_bl_bit();
+
+	/* set wdt */
+	csr = sh_wdt_read_csr();
+	csr &= ~WTCSR_TME;
+	csr |= WTCSR_CKS_4096;
+	sh_wdt_write_csr(csr);
+	csr = sh_wdt_read_csr();
+	sh_wdt_write_cnt(0);
+
+	/* disable PLL1 */
+	frqcr = __raw_readw(FRQCR);
+	frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
+	__raw_writew(frqcr, FRQCR);
+
+	/* enable standby */
+	stbcr = __raw_readb(STBCR);
+	__raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+
+	/* set self-refresh */
+	mcr = __raw_readw(MCR);
+	__raw_writew(mcr & ~MCR_RFSH, MCR);
+
+	/* set interrupt handler */
+	asm volatile("stc vbr, %0" : "=r" (vbr_old));
+	vbr_new = get_zeroed_page(GFP_ATOMIC);
+	udelay(50);
+	memcpy((void*)(vbr_new + INTR_OFFSET),
+	       &wakeup_start, &wakeup_end - &wakeup_start);
+	asm volatile("ldc %0, vbr" : : "r" (vbr_new));
+
+	__raw_writew(0, RTCNT);
+	__raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
+
+	cpu_sleep();
+
+	asm volatile("ldc %0, vbr" : : "r" (vbr_old));
+
+	free_page(vbr_new);
+
+	/* enable PLL1 */
+	frqcr = __raw_readw(FRQCR);
+	frqcr |= FRQCR_PSTBY;
+	__raw_writew(frqcr, FRQCR);
+	udelay(50);
+	frqcr |= FRQCR_PLLEN;
+	__raw_writew(frqcr, FRQCR);
+
+	__raw_writeb(stbcr, STBCR);
+
+	clear_bl_bit();
+}
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+	u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+	u8 scr;
+	u16 hd64461_stbcr;
+#endif
+
+#ifdef CONFIG_HD64461_ENABLER
+	outb(0, HD64461_PCC1CSCIER);
+
+	scr = inb(HD64461_PCC1SCR);
+	scr |= HD64461_PCCSCR_VCC1;
+	outb(scr, HD64461_PCC1SCR);
+
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+	__raw_writeb(0x1f, DACR);
+
+	stbcr = __raw_readb(STBCR);
+	__raw_writeb(0x01, STBCR);
+
+	stbcr2 = __raw_readb(STBCR2);
+	__raw_writeb(0x7f , STBCR2);
+
+	outw(0xf07f, HD64461_SCPUCR);
+
+	pm_enter();
+
+	outw(0, HD64461_SCPUCR);
+	__raw_writeb(stbcr, STBCR);
+	__raw_writeb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+
+	outb(0x4c, HD64461_PCC1CSCIER);
+	outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+	return 0;
+}
+
+static const struct platform_suspend_ops hp6x0_pm_ops = {
+	.enter		= hp6x0_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+	suspend_set_ops(&hp6x0_pm_ops);
+	return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/kernel/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/kernel/arch/sh/boards/mach-hp6xx/pm_wakeup.S
new file mode 100644
index 000000000..4f18d44e0
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <cpu/mmu_context.h>
+
+/*
+ * Kernel mode register usage:
+ *	k0	scratch
+ *	k1	scratch
+ * For more details, please have a look at entry.S
+ */
+
+#define k0	r0
+#define k1	r1
+
+ENTRY(wakeup_start)
+! clear STBY bit
+	mov	#-126, k1
+   	and	#127, k0
+	mov.b	k0, @k1
+! enable refresh
+	mov.l	5f, k1
+	mov.w	6f, k0
+  	mov.w	k0, @k1
+! jump to handler
+	mov.l	4f, k1
+	jmp	@k1
+	 nop
+
+	.align	2
+4:	.long	handle_interrupt
+5:	.long	0xffffff68
+6:	.word	0x0524
+
+ENTRY(wakeup_end)
+	nop
diff --git a/kernel/arch/sh/boards/mach-hp6xx/setup.c b/kernel/arch/sh/boards/mach-hp6xx/setup.c
new file mode 100644
index 000000000..05797b33f
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-hp6xx/setup.c
@@ -0,0 +1,174 @@
+/*
+ * linux/arch/sh/boards/hp6xx/setup.c
+ *
+ * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/sh_intc.h>
+#include <sound/sh_dac_audio.h>
+#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <mach/hp6xx.h>
+#include <cpu/dac.h>
+
+#define	SCPCR	0xa4000116
+#define	SCPDR	0xa4000136
+
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start = 0x15000000 + 0x1f0,
+		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 0x15000000 + 0x1fe,
+		.end   = 0x15000000 + 0x1fe + 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = evt2irq(0xba0),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		=  "pata_platform",
+	.id		=  -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device jornadakbd_device = {
+	.name		= "jornada680_kbd",
+	.id		= -1,
+};
+
+static void dac_audio_start(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker on */
+	v = inw(HD64461_GPADR);
+	v &= ~HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker on */
+	v8 = inb(PKDR);
+	v8 &= ~PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_enable(pdata->channel);
+}
+
+static void dac_audio_stop(struct dac_audio_pdata *pdata)
+{
+	u16 v;
+	u8 v8;
+
+	/* HP Jornada 680/690 speaker off */
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER;
+	outw(v, HD64461_GPADR);
+
+	/* HP Palmtop 620lx/660lx speaker off */
+	v8 = inb(PKDR);
+	v8 |= PKDR_SPEAKER;
+	outb(v8, PKDR);
+
+	sh_dac_output(0, pdata->channel);
+	sh_dac_disable(pdata->channel);
+}
+
+static struct dac_audio_pdata dac_audio_platform_data = {
+	.buffer_size		= 64000,
+	.channel		= 1,
+	.start			= dac_audio_start,
+	.stop			= dac_audio_stop,
+};
+
+static struct platform_device dac_audio_device = {
+	.name		= "dac_audio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dac_audio_platform_data,
+	}
+
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+	&cf_ide_device,
+	&jornadakbd_device,
+	&dac_audio_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+	/* Gets touchscreen and powerbutton IRQ working */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static int __init hp6xx_devices_setup(void)
+{
+	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
+static void __init hp6xx_setup(char **cmdline_p)
+{
+	u8 v8;
+	u16 v;
+
+	v = inw(HD64461_STBCR);
+	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
+		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
+		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
+		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+		HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+	v |= HD64461_STBCR_SPC1ST;
+#endif
+	outw(v, HD64461_STBCR);
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+	outw(v, HD64461_GPADR);
+
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+	sh_dac_output(0, DAC_SPEAKER_VOLUME);
+	sh_dac_disable(DAC_SPEAKER_VOLUME);
+	v8 = __raw_readb(DACR);
+	v8 &= ~DACR_DAE;
+	__raw_writeb(v8,DACR);
+
+	v8 = __raw_readb(SCPDR);
+	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+	v8 &= ~SCPDR_TS_SCAN_ENABLE;
+	__raw_writeb(v8, SCPDR);
+
+	v = __raw_readw(SCPCR);
+	v &= ~SCPCR_TS_MASK;
+	v |= SCPCR_TS_ENABLE;
+	__raw_writew(v, SCPCR);
+}
+device_initcall(hp6xx_devices_setup);
+
+static struct sh_machine_vector mv_hp6xx __initmv = {
+	.mv_name = "hp6xx",
+	.mv_setup = hp6xx_setup,
+	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+	.mv_init_irq = hp6xx_init_irq,
+};
diff --git a/kernel/arch/sh/boards/mach-kfr2r09/Makefile b/kernel/arch/sh/boards/mach-kfr2r09/Makefile
new file mode 100644
index 000000000..60dd63f4a
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-kfr2r09/Makefile
@@ -0,0 +1,4 @@
+obj-y	:= setup.o sdram.o
+ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),)
+obj-y	+=  lcd_wqvga.o
+endif
diff --git a/kernel/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/kernel/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
new file mode 100644
index 000000000..355a78a3b
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
@@ -0,0 +1,278 @@
+/*
+ * KFR2R09 LCD panel support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * Register settings based on the out-of-tree t33fb.c driver
+ * Copyright (C) 2008 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <mach/kfr2r09.h>
+#include <cpu/sh7724.h>
+
+/* The on-board LCD module is a Hitachi TX07D34VM0AAA. This module is made
+ * up of a 240x400 LCD hooked up to a R61517 driver IC. The driver IC is
+ * communicating with the main port of the LCDC using an 18-bit SYS interface.
+ *
+ * The device code for this LCD module is 0x01221517.
+ */
+
+static const unsigned char data_frame_if[] = {
+	0x02, /* WEMODE: 1=cont, 0=one-shot */
+	0x00, 0x00,
+	0x00, /* EPF, DFM */
+	0x02, /* RIM[1] : 1 (18bpp) */
+};
+
+static const unsigned char data_panel[] = {
+	0x0b,
+	0x63, /* 400 lines */
+	0x04, 0x00, 0x00, 0x04, 0x11, 0x00, 0x00,
+};
+
+static const unsigned char data_timing[] = {
+	0x00, 0x00, 0x13, 0x08, 0x08,
+};
+
+static const unsigned char data_timing_src[] = {
+	0x11, 0x01, 0x00, 0x01,
+};
+
+static const unsigned char data_gamma[] = {
+	0x01, 0x02, 0x08, 0x23,	0x03, 0x0c, 0x00, 0x06,	0x00, 0x00,
+	0x01, 0x00, 0x0c, 0x23, 0x03, 0x08, 0x02, 0x06, 0x00, 0x00,
+};
+
+static const unsigned char data_power[] = {
+	0x07, 0xc5, 0xdc, 0x02,	0x33, 0x0a,
+};
+
+static unsigned long read_reg(void *sohandle,
+			      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	return so->read_data(sohandle);
+}
+
+static void write_reg(void *sohandle,
+		      struct sh_mobile_lcdc_sys_bus_ops *so,
+		      int i, unsigned long v)
+{
+	if (i)
+		so->write_data(sohandle, v); /* PTH4/LCDRS High [param, 17:0] */
+	else
+		so->write_index(sohandle, v); /* PTH4/LCDRS Low [cmd, 7:0] */
+}
+
+static void write_data(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so,
+		       unsigned char const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i++)
+		write_reg(sohandle, so, 1, data[i]);
+}
+
+static unsigned long read_device_code(void *sohandle,
+				      struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long device_code;
+
+	/* access protect OFF */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* deep standby OFF */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* device code command */
+	write_reg(sohandle, so, 0, 0xbf);
+	mdelay(50);
+
+	/* dummy read */
+	read_reg(sohandle, so);
+
+	/* read device code */
+	device_code = ((read_reg(sohandle, so) & 0xff) << 24);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 16);
+	device_code |= ((read_reg(sohandle, so) & 0xff) << 8);
+	device_code |= (read_reg(sohandle, so) & 0xff);
+
+	return device_code;
+}
+
+static void write_memory_start(void *sohandle,
+			       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_reg(sohandle, so, 0, 0x2c);
+}
+
+static void clear_memory(void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	int i;
+
+	/* write start */
+	write_memory_start(sohandle, so);
+
+	/* paint it black */
+	for (i = 0; i < (240 * 400); i++)
+		write_reg(sohandle, so, 1, 0x00);
+}
+
+static void display_on(void *sohandle,
+		       struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* access protect off */
+	write_reg(sohandle, so, 0, 0xb0);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* exit deep standby mode */
+	write_reg(sohandle, so, 0, 0xb1);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* frame memory I/F */
+	write_reg(sohandle, so, 0, 0xb3);
+	write_data(sohandle, so, data_frame_if, ARRAY_SIZE(data_frame_if));
+
+	/* display mode and frame memory write mode */
+	write_reg(sohandle, so, 0, 0xb4);
+	write_reg(sohandle, so, 1, 0x00); /* DBI, internal clock */
+
+	/* panel */
+	write_reg(sohandle, so, 0, 0xc0);
+	write_data(sohandle, so, data_panel, ARRAY_SIZE(data_panel));
+
+	/* timing (normal) */
+	write_reg(sohandle, so, 0, 0xc1);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (partial) */
+	write_reg(sohandle, so, 0, 0xc2);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (idle) */
+	write_reg(sohandle, so, 0, 0xc3);
+	write_data(sohandle, so, data_timing, ARRAY_SIZE(data_timing));
+
+	/* timing (source/VCOM/gate driving) */
+	write_reg(sohandle, so, 0, 0xc4);
+	write_data(sohandle, so, data_timing_src, ARRAY_SIZE(data_timing_src));
+
+	/* gamma (red) */
+	write_reg(sohandle, so, 0, 0xc8);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (green) */
+	write_reg(sohandle, so, 0, 0xc9);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* gamma (blue) */
+	write_reg(sohandle, so, 0, 0xca);
+	write_data(sohandle, so, data_gamma, ARRAY_SIZE(data_gamma));
+
+	/* power (common) */
+	write_reg(sohandle, so, 0, 0xd0);
+	write_data(sohandle, so, data_power, ARRAY_SIZE(data_power));
+
+	/* VCOM */
+	write_reg(sohandle, so, 0, 0xd1);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x0f);
+	write_reg(sohandle, so, 1, 0x02);
+
+	/* power (normal) */
+	write_reg(sohandle, so, 0, 0xd2);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (partial) */
+	write_reg(sohandle, so, 0, 0xd3);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	/* power (idle) */
+	write_reg(sohandle, so, 0, 0xd4);
+	write_reg(sohandle, so, 1, 0x63);
+	write_reg(sohandle, so, 1, 0x24);
+
+	write_reg(sohandle, so, 0, 0xd8);
+	write_reg(sohandle, so, 1, 0x77);
+	write_reg(sohandle, so, 1, 0x77);
+
+	/* TE signal */
+	write_reg(sohandle, so, 0, 0x35);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* TE signal line */
+	write_reg(sohandle, so, 0, 0x44);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+
+	/* column address */
+	write_reg(sohandle, so, 0, 0x2a);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0xef);
+
+	/* page address */
+	write_reg(sohandle, so, 0, 0x2b);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x00);
+	write_reg(sohandle, so, 1, 0x01);
+	write_reg(sohandle, so, 1, 0x8f);
+
+	/* exit sleep mode */
+	write_reg(sohandle, so, 0, 0x11);
+
+	mdelay(120);
+
+	/* clear vram */
+	clear_memory(sohandle, so);
+
+	/* display ON */
+	write_reg(sohandle, so, 0, 0x29);
+	mdelay(1);
+
+	write_memory_start(sohandle, so);
+}
+
+int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	/* power on */
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	gpio_set_value(GPIO_PTE4, 0);  /* LCD_RST/ -> L */
+	gpio_set_value(GPIO_PTF4, 1);  /* PROTECT/ -> H */
+	udelay(1100);
+	gpio_set_value(GPIO_PTE4, 1);  /* LCD_RST/ -> H */
+	udelay(10);
+	gpio_set_value(GPIO_PTF4, 0);  /* PROTECT/ -> L */
+	mdelay(20);
+
+	if (read_device_code(sohandle, so) != 0x01221517)
+		return -ENODEV;
+
+	pr_info("KFR2R09 WQVGA LCD Module detected.\n");
+
+	display_on(sohandle, so);
+	return 0;
+}
+
+void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	write_memory_start(sohandle, so);
+}
diff --git a/kernel/arch/sh/boards/mach-kfr2r09/sdram.S b/kernel/arch/sh/boards/mach-kfr2r09/sdram.S
new file mode 100644
index 000000000..0c9f55bec
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-kfr2r09/sdram.S
@@ -0,0 +1,80 @@
+/*
+ * KFR2R09 sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(kfr2r09_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(kfr2r09_sdram_enter_end)
+
+	.balign 4
+ENTRY(kfr2r09_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
+	ED 0xFD000020, 0x011B0002 /* DBCONF */
+	ED 0xFD000030, 0x03060E02 /* DBTR0 */
+	ED 0xFD000034, 0x01020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090406 /* DBTR2 */
+	ED 0xFD000008, 0x00000004 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+	WAIT 1
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
+	ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(kfr2r09_sdram_leave_end)
diff --git a/kernel/arch/sh/boards/mach-kfr2r09/setup.c b/kernel/arch/sh/boards/mach-kfr2r09/setup.c
new file mode 100644
index 000000000..7d997cec0
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-kfr2r09/setup.c
@@ -0,0 +1,661 @@
+/*
+ * KFR2R09 board support code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/onenand.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/lv5207lp.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <media/rj54n1cb0c.h>
+#include <media/soc_camera.h>
+#include <media/sh_mobile_ceu.h>
+#include <video/sh_mobile_lcdc.h>
+#include <asm/suspend.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7724.h>
+#include <mach/kfr2r09.h>
+
+static struct mtd_partition kfr2r09_nor_flash_partitions[] =
+{
+	{
+		.name = "boot",
+		.offset = 0,
+		.size = (4 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data kfr2r09_nor_flash_data = {
+	.width		= 2,
+	.parts		= kfr2r09_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(kfr2r09_nor_flash_partitions),
+};
+
+static struct resource kfr2r09_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= kfr2r09_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nor_flash_resources),
+	.dev		= {
+		.platform_data = &kfr2r09_nor_flash_data,
+	},
+};
+
+static struct resource kfr2r09_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x10000000,
+		.end		= 0x1001ffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device kfr2r09_nand_flash_device = {
+	.name		= "onenand-flash",
+	.resource	= kfr2r09_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(kfr2r09_nand_flash_resources),
+};
+
+static struct sh_keysc_info kfr2r09_sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 10,
+	.keycodes = {
+		KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
+		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
+		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
+		KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
+		KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
+		0, 0, 0, 0, 0
+	},
+};
+
+static struct resource kfr2r09_sh_keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
+	.resource       = kfr2r09_sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_keysc_info,
+	},
+};
+
+static const struct fb_videomode kfr2r09_lcdc_modes[] = {
+	{
+		.name = "TX07D34VM0AAA",
+		.xres = 240,
+		.yres = 400,
+		.left_margin = 0,
+		.right_margin = 16,
+		.hsync_len = 8,
+		.upper_margin = 0,
+		.lower_margin = 1,
+		.vsync_len = 1,
+		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = SYS18,
+		.clock_divider = 6,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_modes = kfr2r09_lcdc_modes,
+		.num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
+		.panel_cfg = {
+			.width = 35,
+			.height = 58,
+			.setup_sys = kfr2r09_lcd_setup,
+			.start_transfer = kfr2r09_lcd_start,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x07010904,
+			.ldmt3r = 0x14012914,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+};
+
+static struct resource kfr2r09_sh_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kfr2r09_sh_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
+	.resource	= kfr2r09_sh_lcdc_resources,
+	.dev	= {
+		.platform_data	= &kfr2r09_sh_lcdc_info,
+	},
+};
+
+static struct lv5207lp_platform_data kfr2r09_backlight_data = {
+	.fbdev = &kfr2r09_sh_lcdc_device.dev,
+	.def_value = 13,
+	.max_value = 13,
+};
+
+static struct i2c_board_info kfr2r09_backlight_board_info = {
+	I2C_BOARD_INFO("lv5207lp", 0x75),
+	.platform_data = &kfr2r09_backlight_data,
+};
+
+static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource kfr2r09_usb0_gadget_resources[] = {
+	[0] = {
+		.start	= 0x04d80000,
+		.end	= 0x04d80123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device kfr2r09_usb0_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data	= &kfr2r09_usb0_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
+	.resource	= kfr2r09_usb0_gadget_resources,
+};
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource kfr2r09_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.end	= evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device kfr2r09_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(kfr2r09_ceu_resources),
+	.resource	= kfr2r09_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct i2c_board_info kfr2r09_i2c_camera = {
+	I2C_BOARD_INFO("rj54n1cb0c", 0x50),
+};
+
+static struct clk *camera_clk;
+
+/* set VIO_CKO clock to 25MHz */
+#define CEU_MCLK_FREQ 25000000
+
+#define DRVCRB 0xA405018C
+static int camera_power(struct device *dev, int mode)
+{
+	int ret;
+
+	if (mode) {
+		long rate;
+
+		camera_clk = clk_get(NULL, "video_clk");
+		if (IS_ERR(camera_clk))
+			return PTR_ERR(camera_clk);
+
+		rate = clk_round_rate(camera_clk, CEU_MCLK_FREQ);
+		ret = clk_set_rate(camera_clk, rate);
+		if (ret < 0)
+			goto eclkrate;
+
+		/* set DRVCRB
+		 *
+		 * use 1.8 V for VccQ_VIO
+		 * use 2.85V for VccQ_SR
+		 */
+		__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+
+		/* reset clear */
+		ret = gpio_request(GPIO_PTB4, NULL);
+		if (ret < 0)
+			goto eptb4;
+		ret = gpio_request(GPIO_PTB7, NULL);
+		if (ret < 0)
+			goto eptb7;
+
+		ret = gpio_direction_output(GPIO_PTB4, 1);
+		if (!ret)
+			ret = gpio_direction_output(GPIO_PTB7, 1);
+		if (ret < 0)
+			goto egpioout;
+		msleep(1);
+
+		ret = clk_enable(camera_clk);	/* start VIO_CKO */
+		if (ret < 0)
+			goto eclkon;
+
+		return 0;
+	}
+
+	ret = 0;
+
+	clk_disable(camera_clk);
+eclkon:
+	gpio_set_value(GPIO_PTB7, 0);
+egpioout:
+	gpio_set_value(GPIO_PTB4, 0);
+	gpio_free(GPIO_PTB7);
+eptb7:
+	gpio_free(GPIO_PTB4);
+eptb4:
+eclkrate:
+	clk_put(camera_clk);
+	return ret;
+}
+
+static struct rj54n1_pdata rj54n1_priv = {
+	.mclk_freq	= CEU_MCLK_FREQ,
+	.ioctl_high	= false,
+};
+
+static struct soc_camera_link rj54n1_link = {
+	.power		= camera_power,
+	.board_info	= &kfr2r09_i2c_camera,
+	.i2c_adapter_id	= 1,
+	.priv		= &rj54n1_priv,
+};
+
+static struct platform_device kfr2r09_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &rj54n1_link,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct resource kfr2r09_sh_sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi0_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.flags		= TMIO_MMC_WRPROTECT_DISABLE,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device kfr2r09_sh_sdhi0_device = {
+	.name           = "sh_mobile_sdhi",
+	.num_resources  = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
+	.resource       = kfr2r09_sh_sdhi0_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
+};
+
+static struct platform_device *kfr2r09_devices[] __initdata = {
+	&kfr2r09_nor_flash_device,
+	&kfr2r09_nand_flash_device,
+	&kfr2r09_sh_keysc_device,
+	&kfr2r09_sh_lcdc_device,
+	&kfr2r09_ceu_device,
+	&kfr2r09_camera,
+	&kfr2r09_sh_sdhi0_device,
+};
+
+#define BSC_CS0BCR 0xfec10004
+#define BSC_CS0WCR 0xfec10024
+#define BSC_CS4BCR 0xfec10010
+#define BSC_CS4WCR 0xfec10030
+#define PORT_MSELCRB 0xa4050182
+
+#ifdef CONFIG_I2C
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 1);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	unsigned char buf[2];
+	int ret;
+
+	a = i2c_get_adapter(0);
+	if (!a)
+		return -ENODEV;
+
+	/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[0] = 0;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 1;
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	buf[1] = buf[0] | (1 << 6);
+	buf[0] = 0x13;
+	msg.addr = 0x09;
+	msg.buf = buf;
+	msg.len = 2;
+	msg.flags = 0;
+	ret = i2c_transfer(a, &msg, 1);
+	if (ret != 1)
+		return -ENODEV;
+
+	return 0;
+}
+#else
+static int kfr2r09_usb0_gadget_i2c_setup(void)
+{
+	return -ENODEV;
+}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+	return -ENODEV;
+}
+#endif
+
+static int kfr2r09_usb0_gadget_setup(void)
+{
+	int plugged_in;
+
+	gpio_request(GPIO_PTN4, NULL); /* USB_DET */
+	gpio_direction_input(GPIO_PTN4);
+	plugged_in = gpio_get_value(GPIO_PTN4);
+	if (!plugged_in)
+		return -ENODEV; /* no cable plugged in */
+
+	if (kfr2r09_usb0_gadget_i2c_setup() != 0)
+		return -ENODEV; /* unable to configure using i2c */
+
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
+	gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
+	gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
+	msleep(20); /* wait 20ms to let the clock settle */
+	clk_enable(clk_get(NULL, "usb0"));
+	__raw_writew(0x0600, 0xa40501d4);
+
+	return 0;
+}
+
+extern char kfr2r09_sdram_enter_start;
+extern char kfr2r09_sdram_enter_end;
+extern char kfr2r09_sdram_leave_start;
+extern char kfr2r09_sdram_leave_end;
+
+static int __init kfr2r09_devices_setup(void)
+{
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&kfr2r09_sdram_enter_start,
+					&kfr2r09_sdram_enter_end,
+					&kfr2r09_sdram_leave_start,
+					&kfr2r09_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* enable SCIF1 serial port for YC401 console support */
+	gpio_request(GPIO_FN_SCIF1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+	kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
+	gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
+	gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
+
+	/* setup NOR flash at CS0 */
+	__raw_writel(0x36db0400, BSC_CS0BCR);
+	__raw_writel(0x00000500, BSC_CS0WCR);
+
+	/* setup NAND flash at CS4 */
+	__raw_writel(0x36db0400, BSC_CS4BCR);
+	__raw_writel(0x00000500, BSC_CS4WCR);
+
+	/* setup KEYSC pins */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN0, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* setup LCDC pins for SYS panel */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
+	gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
+	gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
+	gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
+	gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
+	gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
+	gpio_direction_output(GPIO_PTE4, 1);
+	gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
+	gpio_direction_output(GPIO_PTF4, 1);
+	gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
+	gpio_direction_output(GPIO_PTU0, 1);
+
+	/* setup USB function */
+	if (kfr2r09_usb0_gadget_setup() == 0)
+		platform_device_register(&kfr2r09_usb0_gadget_device);
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_VD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_D7, NULL);
+	gpio_request(GPIO_FN_VIO0_D6, NULL);
+	gpio_request(GPIO_FN_VIO0_D5, NULL);
+	gpio_request(GPIO_FN_VIO0_D4, NULL);
+	gpio_request(GPIO_FN_VIO0_D3, NULL);
+	gpio_request(GPIO_FN_VIO0_D2, NULL);
+	gpio_request(GPIO_FN_VIO0_D1, NULL);
+	gpio_request(GPIO_FN_VIO0_D0, NULL);
+
+	platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
+
+	/* SDHI0 connected to yc304 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
+
+	return platform_add_devices(kfr2r09_devices,
+				    ARRAY_SIZE(kfr2r09_devices));
+}
+device_initcall(kfr2r09_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int kfr2r09_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * MD8=1: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_kfr2r09 __initmv = {
+	.mv_name		= "kfr2r09",
+	.mv_mode_pins		= kfr2r09_mode_pins,
+};
diff --git a/kernel/arch/sh/boards/mach-landisk/Makefile b/kernel/arch/sh/boards/mach-landisk/Makefile
new file mode 100644
index 000000000..a696b4277
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-landisk/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for I-O DATA DEVICE, INC. "LANDISK Series"
+#
+
+obj-y	 := setup.o irq.o psw.o gio.o
diff --git a/kernel/arch/sh/boards/mach-landisk/gio.c b/kernel/arch/sh/boards/mach-landisk/gio.c
new file mode 100644
index 000000000..8132dff07
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-landisk/gio.c
@@ -0,0 +1,170 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ *   Copylight (C) 2006 kogiidena
+ *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+#define DEVCOUNT                4
+#define GIO_MINOR	        2	/* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+	int ret = -ENOENT;
+
+	preempt_disable();
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		if (openCnt > 0) {
+			ret = -EALREADY;
+		} else {
+			openCnt++;
+			ret = 0;
+		}
+	}
+	preempt_enable();
+	return ret;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		openCnt--;
+	}
+	return 0;
+}
+
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	unsigned int data;
+	static unsigned int addr = 0;
+
+	if (cmd & 0x01) {	/* write */
+		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+
+	switch (cmd) {
+	case GIODRV_IOCSGIOSETADDR:	/* address set */
+		addr = data;
+		break;
+
+	case GIODRV_IOCSGIODATA1:	/* write byte */
+		__raw_writeb((unsigned char)(0x0ff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA2:	/* write word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		__raw_writew((unsigned short int)(0x0ffff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA4:	/* write long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		__raw_writel(data, addr);
+		break;
+
+	case GIODRV_IOCGGIODATA1:	/* read byte */
+		data = __raw_readb(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA2:	/* read word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		data = __raw_readw(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA4:	/* read long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		data = __raw_readl(addr);
+		break;
+	default:
+		return -EFAULT;
+		break;
+	}
+
+	if ((cmd & 0x01) == 0) {	/* read */
+		if (copy_to_user((int *)arg, &data, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+static const struct file_operations gio_fops = {
+	.owner = THIS_MODULE,
+	.open = gio_open,	/* open */
+	.release = gio_close,	/* release */
+	.unlocked_ioctl = gio_ioctl,
+	.llseek = noop_llseek,
+};
+
+static int __init gio_init(void)
+{
+	int error;
+
+	printk(KERN_INFO "gio: driver initialized\n");
+
+	openCnt = 0;
+
+	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+		printk(KERN_ERR
+		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
+		       error);
+		return 1;
+	}
+
+	cdev_p = cdev_alloc();
+	cdev_p->ops = &gio_fops;
+	error = cdev_add(cdev_p, dev, DEVCOUNT);
+	if (error) {
+		printk(KERN_ERR
+		       "gio: Couldn't cdev_add, error=%d\n", error);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __exit gio_exit(void)
+{
+	cdev_del(cdev_p);
+	unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/kernel/arch/sh/boards/mach-landisk/irq.c b/kernel/arch/sh/boards/mach-landisk/irq.c
new file mode 100644
index 000000000..c00ace38d
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-landisk/irq.c
@@ -0,0 +1,66 @@
+/*
+ * arch/sh/boards/mach-landisk/irq.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ * Copyright (C) 2011 Nobuhiro Iwamatsu
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+enum {
+	UNUSED = 0,
+
+	PCI_INTA, /* PCI int A */
+	PCI_INTB, /* PCI int B */
+	PCI_INTC, /* PCI int C */
+	PCI_INTD, /* PCI int D */
+	ATA,	  /* ATA */
+	FATA,	  /* CF */
+	POWER,	  /* Power swtich */
+	BUTTON,	  /* Button swtich */
+};
+
+/* Vectors for LANDISK */
+static struct intc_vect vectors_landisk[] __initdata = {
+	INTC_IRQ(PCI_INTA, IRQ_PCIINTA),
+	INTC_IRQ(PCI_INTB, IRQ_PCIINTB),
+	INTC_IRQ(PCI_INTC, IRQ_PCIINTC),
+	INTC_IRQ(PCI_INTD, IRQ_PCIINTD),
+	INTC_IRQ(ATA, IRQ_ATA),
+	INTC_IRQ(FATA, IRQ_FATA),
+	INTC_IRQ(POWER, IRQ_POWER),
+	INTC_IRQ(BUTTON, IRQ_BUTTON),
+};
+
+/* IRLMSK mask register layout for LANDISK */
+static struct intc_mask_reg mask_registers_landisk[] __initdata = {
+	{ PA_IMASK, 0, 8, /* IRLMSK */
+	  {  BUTTON, POWER, FATA, ATA,
+	     PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA,
+	  }
+	},
+};
+
+static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL,
+			mask_registers_landisk, NULL, NULL);
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+	register_intc_controller(&intc_desc_landisk);
+	__raw_writeb(0x00, PA_PWRINT_CLR);
+}
diff --git a/kernel/arch/sh/boards/mach-landisk/psw.c b/kernel/arch/sh/boards/mach-landisk/psw.c
new file mode 100644
index 000000000..bef83522f
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int sw_value;
+	int ret = 0;
+
+	sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	/* Figure out who raised it */
+	if (sw_value & (1 << psw_info->bit)) {
+		psw->state = 1;
+		mod_timer(&psw->debounce, jiffies + 50);
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	__raw_writeb(0x00, PA_PWRINT_CLR);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+	[0] = {
+		.start = IRQ_POWER,
+		.flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+	[0] = {
+		.start = IRQ_BUTTON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+	.name		= "psw_power",
+	.bit		= 4,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+	.name		= "psw1",
+	.bit		= 0,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+	.name		= "psw2",
+	.bit		= 2,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+	.name		= "psw3",
+	.bit		= 1,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_power_resources),
+	.resource	= psw_power_resources,
+	.dev		= {
+		.platform_data = &psw_power_platform_data,
+	},
+};
+
+static struct platform_device psw1_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw1_platform_data,
+	},
+};
+
+static struct platform_device psw2_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw2_platform_data,
+	},
+};
+
+static struct platform_device psw3_switch_device = {
+	.name		= "push-switch",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev = {
+		.platform_data = &psw3_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&psw_power_switch_device,
+	&psw1_switch_device,
+	&psw2_switch_device,
+	&psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/kernel/arch/sh/boards/mach-landisk/setup.c b/kernel/arch/sh/boards/mach-landisk/setup.c
new file mode 100644
index 000000000..f1147caeb
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-landisk/setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/io.h>
+
+static void landisk_power_off(void)
+{
+	__raw_writeb(0x01, PA_SHUTDOWN);
+}
+
+static struct resource cf_ide_resources[3];
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev		= {
+		.platform_data = &pata_info,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rs5c313",
+	.id		= -1,
+};
+
+static struct platform_device *landisk_devices[] __initdata = {
+	&cf_ide_device,
+	&rtc_device,
+};
+
+static int __init landisk_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+	cf_ide_resources[0].flags = IORESOURCE_IO;
+	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+	cf_ide_resources[1].flags = IORESOURCE_IO;
+	cf_ide_resources[2].start = IRQ_FATA;
+	cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+	return platform_add_devices(landisk_devices,
+				    ARRAY_SIZE(landisk_devices));
+}
+
+device_initcall(landisk_devices_setup);
+
+static void __init landisk_setup(char **cmdline_p)
+{
+	/* LED ON */
+	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
+
+	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+	pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_landisk __initmv = {
+	.mv_name = "LANDISK",
+	.mv_setup = landisk_setup,
+	.mv_init_irq = init_landisk_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-lboxre2/Makefile b/kernel/arch/sh/boards/mach-lboxre2/Makefile
new file mode 100644
index 000000000..e9ed140c0
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-lboxre2/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the L-BOX RE2 specific parts of the kernel
+# Copyright (c) 2007 Nobuhiro Iwamatsu
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-lboxre2/irq.c b/kernel/arch/sh/boards/mach-lboxre2/irq.c
new file mode 100644
index 000000000..8aa171ab8
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-lboxre2/irq.c
@@ -0,0 +1,31 @@
+/*
+ * linux/arch/sh/boards/lboxre2/irq.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach/lboxre2.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_lboxre2_IRQ(void)
+{
+	make_imask_irq(IRQ_CF1);
+	make_imask_irq(IRQ_CF0);
+	make_imask_irq(IRQ_INTD);
+	make_imask_irq(IRQ_ETH1);
+	make_imask_irq(IRQ_ETH0);
+	make_imask_irq(IRQ_INTA);
+}
diff --git a/kernel/arch/sh/boards/mach-lboxre2/setup.c b/kernel/arch/sh/boards/mach-lboxre2/setup.c
new file mode 100644
index 000000000..6660622aa
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-lboxre2/setup.c
@@ -0,0 +1,83 @@
+/*
+ * linux/arch/sh/boards/lbox/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 Support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/machvec.h>
+#include <asm/addrspace.h>
+#include <mach/lboxre2.h>
+#include <asm/io.h>
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRQ_CF0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct platform_device *lboxre2_devices[] __initdata = {
+       &cf_ide_device,
+};
+
+static int __init lboxre2_devices_setup(void)
+{
+	u32 cf0_io_base;	/* Boot CF base address */
+	pgprot_t prot;
+	unsigned long paddrbase, psize;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void*)PA_AREA5_IO);
+	psize = PAGE_SIZE;
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf0_io_base = (u32)ioremap_prot(paddrbase, psize, pgprot_val(prot));
+	if (!cf0_io_base) {
+		printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
+		return -ENOMEM;
+	}
+
+	cf_ide_resources[0].start += cf0_io_base ;
+	cf_ide_resources[0].end   += cf0_io_base ;
+	cf_ide_resources[1].start += cf0_io_base ;
+	cf_ide_resources[1].end   += cf0_io_base ;
+
+	return platform_add_devices(lboxre2_devices,
+			ARRAY_SIZE(lboxre2_devices));
+
+}
+device_initcall(lboxre2_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_lboxre2 __initmv = {
+	.mv_name		= "L-BOX RE2",
+	.mv_init_irq		= init_lboxre2_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-microdev/Makefile b/kernel/arch/sh/boards/mach-microdev/Makefile
new file mode 100644
index 000000000..4e3588e88
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-microdev/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SuperH MicroDev specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o io.o fdc37c93xapm.o
diff --git a/kernel/arch/sh/boards/mach-microdev/fdc37c93xapm.c b/kernel/arch/sh/boards/mach-microdev/fdc37c93xapm.c
new file mode 100644
index 000000000..458a7cf5f
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-microdev/fdc37c93xapm.c
@@ -0,0 +1,160 @@
+/*
+ *
+ * Setup for the SMSC FDC37C93xAPM
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach/microdev.h>
+
+#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
+#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
+
+#define SMSC_ENTER_CONFIG_KEY	 0x55
+#define SMSC_EXIT_CONFIG_KEY	 0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	 0x07	/* Logical Device Number */
+#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
+#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
+#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
+#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
+#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
+#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
+#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
+#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
+#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
+
+#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
+#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
+#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
+#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
+#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
+#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
+#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
+
+#define SMSC_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
+#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
+#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
+#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
+
+#define SERIAL1_PRIMARY_BASE	0x03f8
+#define SERIAL2_PRIMARY_BASE	0x02f8
+
+#define	MSB(x)		( (x) >> 8 )
+#define	LSB(x)		( (x) & 0xff )
+
+	/* General-Purpose base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
+
+static int __init smsc_superio_setup(void)
+{
+
+	unsigned char devid, devrev;
+
+		/* Initially the chip is in run state */
+		/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+		/* Read device ID info */
+	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+
+	if ((devid == 0x30) && (devrev == 0x01))
+		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
+	else
+		return -ENODEV;
+
+		/* Select the keyboard device */
+	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
+
+		/* Select the Serial #1 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the Serial #2 device */
+	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
+		/* enable the interrupts */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#1 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
+	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the IDE#2 device */
+	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+		/* enable it */
+	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+		/* program with port addresses */
+	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
+	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
+	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
+		/* select the interrupt */
+	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
+
+		/* Select the configuration registers */
+	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
+		/* enable the appropriate GPIO pins for IDE functionality:
+		 * bit[0]   In/Out		1==input;  0==output
+		 * bit[1]   Polarity		1==invert; 0==no invert
+		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
+		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
+		 */
+	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
+	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
+	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
+	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
+	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
+
+		/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+device_initcall(smsc_superio_setup);
diff --git a/kernel/arch/sh/boards/mach-microdev/io.c b/kernel/arch/sh/boards/mach-microdev/io.c
new file mode 100644
index 000000000..acdafb0c6
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-microdev/io.c
@@ -0,0 +1,125 @@
+/*
+ * linux/arch/sh/boards/superh/microdev/io.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+#include <mach/microdev.h>
+
+	/*
+	 *	we need to have a 'safe' address to re-direct all I/O requests
+	 *	that we do not explicitly wish to handle. This safe address
+	 *	must have the following properies:
+	 *
+	 *		* writes are ignored (no exception)
+	 *		* reads are benign (no side-effects)
+	 *		* accesses of width 1, 2 and 4-bytes are all valid.
+	 *
+	 *	The Processor Version Register (PVR) has these properties.
+	 */
+#define	PVR	0xff000030	/* Processor Version Register */
+
+
+#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
+#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
+#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
+#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
+#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
+#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
+#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
+#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
+#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
+
+#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
+#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
+#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
+#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
+#define IO_SERIAL_EXTENT	0x10ul
+
+#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
+#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
+#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
+
+/*
+ * map I/O ports to memory-mapped addresses
+ */
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
+{
+	unsigned long result;
+
+	if ((offset >= IO_LAN91C111_BASE) &&
+	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
+			/*
+			 *	SMSC LAN91C111 Ethernet chip
+			 */
+		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
+	} else if ((offset >= IO_SUPERIO_BASE) &&
+		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Configuration Registers
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if (((offset >= IO_IDE1_BASE) &&
+		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
+		    (offset == IO_IDE1_MISC)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	IDE #1
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if (((offset >= IO_IDE2_BASE) &&
+		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
+		    (offset == IO_IDE2_MISC)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	IDE #2
+			 */
+	        result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_SERIAL1_BASE) &&
+		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Serial #1
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_SERIAL2_BASE) &&
+		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
+			/*
+			 *	SMSC FDC37C93xAPM SuperIO chip
+			 *
+			 *	Serial #2
+			 */
+		result = IO_SUPERIO_PHYS + (offset << 1);
+	} else if ((offset >= IO_ISP1161_BASE) &&
+		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
+			/*
+			 *	Philips USB ISP1161x chip
+			 */
+		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
+	} else {
+			/*
+			 *	safe default.
+			 */
+		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
+		       __func__, offset);
+		result = PVR;
+	}
+
+	return (void __iomem *)result;
+}
diff --git a/kernel/arch/sh/boards/mach-microdev/irq.c b/kernel/arch/sh/boards/mach-microdev/irq.c
new file mode 100644
index 000000000..9a8aff339
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-microdev/irq.c
@@ -0,0 +1,152 @@
+/*
+ * arch/sh/boards/superh/microdev/irq.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <mach/microdev.h>
+
+#define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
+
+static const struct {
+	unsigned char fpgaIrq;
+	unsigned char mapped;
+	const char *name;
+} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
+	{ 0,				0,	"unused"   },		/* IRQ #0	IRL=15	0x200  */
+	{ MICRODEV_FPGA_IRQ_KEYBOARD,	1,	"keyboard" },		/* IRQ #1	IRL=14	0x220  */
+	{ MICRODEV_FPGA_IRQ_SERIAL1,	1,	"Serial #1"},		/* IRQ #2	IRL=13	0x240  */
+	{ MICRODEV_FPGA_IRQ_ETHERNET,	1,	"Ethernet" },		/* IRQ #3	IRL=12	0x260  */
+	{ MICRODEV_FPGA_IRQ_SERIAL2,	0,	"Serial #2"},		/* IRQ #4	IRL=11	0x280  */
+	{ 0,				0,	"unused"   },		/* IRQ #5	IRL=10	0x2a0  */
+	{ 0,				0,	"unused"   },		/* IRQ #6	IRL=9	0x2c0  */
+	{ MICRODEV_FPGA_IRQ_USB_HC,	1,	"USB"	   },		/* IRQ #7	IRL=8	0x2e0  */
+	{ MICRODEV_IRQ_PCI_INTA,	1,	"PCI INTA" },		/* IRQ #8	IRL=7	0x300  */
+	{ MICRODEV_IRQ_PCI_INTB,	1,	"PCI INTB" },		/* IRQ #9	IRL=6	0x320  */
+	{ MICRODEV_IRQ_PCI_INTC,	1,	"PCI INTC" },		/* IRQ #10	IRL=5	0x340  */
+	{ MICRODEV_IRQ_PCI_INTD,	1,	"PCI INTD" },		/* IRQ #11	IRL=4	0x360  */
+	{ MICRODEV_FPGA_IRQ_MOUSE,	1,	"mouse"    },		/* IRQ #12	IRL=3	0x380  */
+	{ MICRODEV_FPGA_IRQ_IDE2,	1,	"IDE #2"   },		/* IRQ #13	IRL=2	0x3a0  */
+	{ MICRODEV_FPGA_IRQ_IDE1,	1,	"IDE #1"   },		/* IRQ #14	IRL=1	0x3c0  */
+	{ 0,				0,	"unused"   },		/* IRQ #15	IRL=0	0x3e0  */
+};
+
+#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
+#  error Inconsistancy in defining the IRQ# for Keyboard!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
+#  error Inconsistancy in defining the IRQ# for Ethernet!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
+#  error Inconsistancy in defining the IRQ# for USB!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
+#  error Inconsistancy in defining the IRQ# for PS/2 Mouse!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
+#  error Inconsistancy in defining the IRQ# for secondary IDE!
+#endif
+
+#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
+#  error Inconsistancy in defining the IRQ# for primary IDE!
+#endif
+
+static void disable_microdev_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned int fpgaIrq;
+
+	if (irq >= NUM_EXTERNAL_IRQS)
+		return;
+	if (!fpgaIrqTable[irq].mapped)
+		return;
+
+	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
+
+	/* disable interrupts on the FPGA INTC register */
+	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
+}
+
+static void enable_microdev_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned long priorityReg, priorities, pri;
+	unsigned int fpgaIrq;
+
+	if (unlikely(irq >= NUM_EXTERNAL_IRQS))
+		return;
+	if (unlikely(!fpgaIrqTable[irq].mapped))
+		return;
+
+	pri = 15 - irq;
+
+	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
+	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
+
+	/* set priority for the interrupt */
+	priorities = __raw_readl(priorityReg);
+	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
+	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
+	__raw_writel(priorities, priorityReg);
+
+	/* enable interrupts on the FPGA INTC register */
+	__raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
+}
+
+static struct irq_chip microdev_irq_type = {
+	.name = "MicroDev-IRQ",
+	.irq_unmask = enable_microdev_irq,
+	.irq_mask = disable_microdev_irq,
+};
+
+/* This function sets the desired irq handler to be a MicroDev type */
+static void __init make_microdev_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_set_chip_and_handler(irq, &microdev_irq_type, handle_level_irq);
+	disable_microdev_irq(irq_get_irq_data(irq));
+}
+
+extern void __init init_microdev_irq(void)
+{
+	int i;
+
+	/* disable interrupts on the FPGA INTC register */
+	__raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
+
+	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
+		make_microdev_irq(i);
+}
+
+extern void microdev_print_fpga_intc_status(void)
+{
+	volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
+	volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
+	volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
+	volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
+	volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
+	volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
+	volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
+	volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
+
+	printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
+	printk("FPGA_INTENB = 0x%08x\n", *intenb);
+	printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
+	printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
+	printk("FPGA_INTREQ = 0x%08x\n", *intreq);
+	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
+	printk("-------------------------------------------------------------------------------\n");
+}
diff --git a/kernel/arch/sh/boards/mach-microdev/setup.c b/kernel/arch/sh/boards/mach-microdev/setup.c
new file mode 100644
index 000000000..6c66ee4d8
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-microdev/setup.c
@@ -0,0 +1,199 @@
+/*
+ * arch/sh/boards/superh/microdev/setup.c
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ * Copyright (C) 2003, 2004 SuperH, Inc.
+ * Copyright (C) 2004, 2005 Paul Mundt
+ *
+ * SuperH SH4-202 MicroDev board support.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <video/s1d13xxxfb.h>
+#include <mach/microdev.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x300,
+		.end		= 0x300 + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= MICRODEV_LINUX_IRQ_ETHERNET,
+		.end		= MICRODEV_LINUX_IRQ_ETHERNET,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct s1d13xxxfb_regval s1d13806_initregs[] = {
+	{ S1DREG_MISC,			0x00 },
+	{ S1DREG_COM_DISP_MODE,		0x00 },
+	{ S1DREG_GPIO_CNF0,		0x00 },
+	{ S1DREG_GPIO_CNF1,		0x00 },
+	{ S1DREG_GPIO_CTL0,		0x00 },
+	{ S1DREG_GPIO_CTL1,		0x00 },
+	{ S1DREG_CLK_CNF,		0x02 },
+	{ S1DREG_LCD_CLK_CNF,		0x01 },
+	{ S1DREG_CRT_CLK_CNF,		0x03 },
+	{ S1DREG_MPLUG_CLK_CNF,		0x03 },
+	{ S1DREG_CPU2MEM_WST_SEL,	0x02 },
+	{ S1DREG_SDRAM_REF_RATE,	0x03 },
+	{ S1DREG_SDRAM_TC0,		0x00 },
+	{ S1DREG_SDRAM_TC1,		0x01 },
+	{ S1DREG_MEM_CNF,		0x80 },
+	{ S1DREG_PANEL_TYPE,		0x25 },
+	{ S1DREG_MOD_RATE,		0x00 },
+	{ S1DREG_LCD_DISP_HWIDTH,	0x63 },
+	{ S1DREG_LCD_NDISP_HPER,	0x1e },
+	{ S1DREG_TFT_FPLINE_START,	0x06 },
+	{ S1DREG_TFT_FPLINE_PWIDTH,	0x03 },
+	{ S1DREG_LCD_DISP_VHEIGHT0,	0x57 },
+	{ S1DREG_LCD_DISP_VHEIGHT1,	0x02 },
+	{ S1DREG_LCD_NDISP_VPER,	0x00 },
+	{ S1DREG_TFT_FPFRAME_START,	0x0a },
+	{ S1DREG_TFT_FPFRAME_PWIDTH,	0x81 },
+	{ S1DREG_LCD_DISP_MODE,		0x03 },
+	{ S1DREG_LCD_MISC,		0x00 },
+	{ S1DREG_LCD_DISP_START0,	0x00 },
+	{ S1DREG_LCD_DISP_START1,	0x00 },
+	{ S1DREG_LCD_DISP_START2,	0x00 },
+	{ S1DREG_LCD_MEM_OFF0,		0x90 },
+	{ S1DREG_LCD_MEM_OFF1,		0x01 },
+	{ S1DREG_LCD_PIX_PAN,		0x00 },
+	{ S1DREG_LCD_DISP_FIFO_HTC,	0x00 },
+	{ S1DREG_LCD_DISP_FIFO_LTC,	0x00 },
+	{ S1DREG_CRT_DISP_HWIDTH,	0x63 },
+	{ S1DREG_CRT_NDISP_HPER,	0x1f },
+	{ S1DREG_CRT_HRTC_START,	0x04 },
+	{ S1DREG_CRT_HRTC_PWIDTH,	0x8f },
+	{ S1DREG_CRT_DISP_VHEIGHT0,	0x57 },
+	{ S1DREG_CRT_DISP_VHEIGHT1,	0x02 },
+	{ S1DREG_CRT_NDISP_VPER,	0x1b },
+	{ S1DREG_CRT_VRTC_START,	0x00 },
+	{ S1DREG_CRT_VRTC_PWIDTH,	0x83 },
+	{ S1DREG_TV_OUT_CTL,		0x10 },
+	{ S1DREG_CRT_DISP_MODE,		0x05 },
+	{ S1DREG_CRT_DISP_START0,	0x00 },
+	{ S1DREG_CRT_DISP_START1,	0x00 },
+	{ S1DREG_CRT_DISP_START2,	0x00 },
+	{ S1DREG_CRT_MEM_OFF0,		0x20 },
+	{ S1DREG_CRT_MEM_OFF1,		0x03 },
+	{ S1DREG_CRT_PIX_PAN,		0x00 },
+	{ S1DREG_CRT_DISP_FIFO_HTC,	0x00 },
+	{ S1DREG_CRT_DISP_FIFO_LTC,	0x00 },
+	{ S1DREG_LCD_CUR_CTL,		0x00 },
+	{ S1DREG_LCD_CUR_START,		0x01 },
+	{ S1DREG_LCD_CUR_XPOS0,		0x00 },
+	{ S1DREG_LCD_CUR_XPOS1,		0x00 },
+	{ S1DREG_LCD_CUR_YPOS0,		0x00 },
+	{ S1DREG_LCD_CUR_YPOS1,		0x00 },
+	{ S1DREG_LCD_CUR_BCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_GCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_RCTL0,		0x00 },
+	{ S1DREG_LCD_CUR_BCTL1,		0x1f },
+	{ S1DREG_LCD_CUR_GCTL1,		0x3f },
+	{ S1DREG_LCD_CUR_RCTL1,		0x1f },
+	{ S1DREG_LCD_CUR_FIFO_HTC,	0x00 },
+	{ S1DREG_CRT_CUR_CTL,		0x00 },
+	{ S1DREG_CRT_CUR_START,		0x01 },
+	{ S1DREG_CRT_CUR_XPOS0,		0x00 },
+	{ S1DREG_CRT_CUR_XPOS1,		0x00 },
+	{ S1DREG_CRT_CUR_YPOS0,		0x00 },
+	{ S1DREG_CRT_CUR_YPOS1,		0x00 },
+	{ S1DREG_CRT_CUR_BCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_GCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_RCTL0,		0x00 },
+	{ S1DREG_CRT_CUR_BCTL1,		0x1f },
+	{ S1DREG_CRT_CUR_GCTL1,		0x3f },
+	{ S1DREG_CRT_CUR_RCTL1,		0x1f },
+	{ S1DREG_CRT_CUR_FIFO_HTC,	0x00 },
+	{ S1DREG_BBLT_CTL0,		0x00 },
+	{ S1DREG_BBLT_CTL1,		0x00 },
+	{ S1DREG_BBLT_CC_EXP,		0x00 },
+	{ S1DREG_BBLT_OP,		0x00 },
+	{ S1DREG_BBLT_SRC_START0,	0x00 },
+	{ S1DREG_BBLT_SRC_START1,	0x00 },
+	{ S1DREG_BBLT_SRC_START2,	0x00 },
+	{ S1DREG_BBLT_DST_START0,	0x00 },
+	{ S1DREG_BBLT_DST_START1,	0x00 },
+	{ S1DREG_BBLT_DST_START2,	0x00 },
+	{ S1DREG_BBLT_MEM_OFF0,		0x00 },
+	{ S1DREG_BBLT_MEM_OFF1,		0x00 },
+	{ S1DREG_BBLT_WIDTH0,		0x00 },
+	{ S1DREG_BBLT_WIDTH1,		0x00 },
+	{ S1DREG_BBLT_HEIGHT0,		0x00 },
+	{ S1DREG_BBLT_HEIGHT1,		0x00 },
+	{ S1DREG_BBLT_BGC0,		0x00 },
+	{ S1DREG_BBLT_BGC1,		0x00 },
+	{ S1DREG_BBLT_FGC0,		0x00 },
+	{ S1DREG_BBLT_FGC1,		0x00 },
+	{ S1DREG_LKUP_MODE,		0x00 },
+	{ S1DREG_LKUP_ADDR,		0x00 },
+	{ S1DREG_PS_CNF,		0x10 },
+	{ S1DREG_PS_STATUS,		0x00 },
+	{ S1DREG_CPU2MEM_WDOGT,		0x00 },
+	{ S1DREG_COM_DISP_MODE,		0x02 },
+};
+
+static struct s1d13xxxfb_pdata s1d13806_platform_data = {
+	.initregs	= s1d13806_initregs,
+	.initregssize	= ARRAY_SIZE(s1d13806_initregs),
+};
+
+static struct resource s1d13806_resources[] = {
+	[0] = {
+		.start		= 0x07200000,
+		.end		= 0x07200000 + SZ_2M - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0x07000000,
+		.end		= 0x07000000 + SZ_2M - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device s1d13806_device = {
+	.name		= "s1d13806fb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s1d13806_resources),
+	.resource	= s1d13806_resources,
+
+	.dev = {
+		.platform_data	= &s1d13806_platform_data,
+	},
+};
+
+static struct platform_device *microdev_devices[] __initdata = {
+	&smc91x_device,
+	&s1d13806_device,
+};
+
+static int __init microdev_devices_setup(void)
+{
+	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
+}
+device_initcall(microdev_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh4202_microdev __initmv = {
+	.mv_name		= "SH4-202 MicroDev",
+	.mv_ioport_map		= microdev_ioport_map,
+	.mv_init_irq		= init_microdev_irq,
+};
diff --git a/kernel/arch/sh/boards/mach-migor/Kconfig b/kernel/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 000000000..a7b3b728e
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/kernel/arch/sh/boards/mach-migor/Makefile b/kernel/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 000000000..4601a89e5
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o sdram.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/kernel/arch/sh/boards/mach-migor/lcd_qvga.c b/kernel/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 000000000..8bccd345b
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,166 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <video/sh_mobile_lcdc.h>
+#include <cpu/sh7722.h>
+#include <mach/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	gpio_set_value(GPIO_PTH2, 0);
+	mdelay(2);
+	gpio_set_value(GPIO_PTH2, 1);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}
diff --git a/kernel/arch/sh/boards/mach-migor/sdram.S b/kernel/arch/sh/boards/mach-migor/sdram.S
new file mode 100644
index 000000000..614aa3a13
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-migor/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * Migo-R sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(migor_sdram_enter_start)
+
+	/* SBSC: disable power down and put in self-refresh mode */
+	mov.l	1f, r4
+	mov.l	2f, r1
+	mov.l	@r4, r2
+	or	r1, r2
+	mov.l   3f, r3
+	and	r3, r2
+	mov.l	r2, @r4
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+2:	.long	0x00000400
+3:	.long	0xffff7fff
+ENTRY(migor_sdram_enter_end)
+
+	.balign 4
+ENTRY(migor_sdram_leave_start)
+
+	/* SBSC: set auto-refresh mode */
+	mov.l	1f, r4
+	mov.l	@r4, r0
+	mov.l   4f, r1
+	and	r1, r0
+	mov.l	r0, @r4
+	mov.l	6f, r4
+	mov.l	8f, r0
+	mov.l	@r4, r1
+	mov	#-1, r4
+	add	r4, r1
+	or	r1, r0
+	mov.l	7f, r1
+	mov.l	r0, @r1
+
+	rts
+	 nop
+
+	.balign 4
+1:	.long	0xfe400008 /* SDCR0 */
+4:	.long	0xfffffbff
+6:	.long   0xfe40001c /* RTCOR */
+7:	.long   0xfe400018 /* RTCNT */
+8:	.long   0xa55a0000
+ENTRY(migor_sdram_leave_end)
diff --git a/kernel/arch/sh/boards/mach-migor/setup.c b/kernel/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 000000000..29b7c0dcf
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,675 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+#include <linux/sh_intc.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/ov772x.h>
+#include <media/soc_camera.h>
+#include <media/tw9910.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/suspend.h>
+#include <mach/migor.h>
+#include <cpu/sh7722.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x600), /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(GPIO_PTA1); /* NAND_RBn */
+}
+
+static struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
+static const struct fb_videomode migor_lcd_modes[] = {
+	{
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+		.name = "LB070WV1",
+		.xres = 800,
+		.yres = 480,
+		.left_margin = 64,
+		.right_margin = 16,
+		.hsync_len = 120,
+		.sync = 0,
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+		.name = "PH240320T",
+		.xres = 320,
+		.yres = 240,
+		.left_margin = 0,
+		.right_margin = 16,
+		.hsync_len = 8,
+		.sync = FB_SYNC_HOR_HIGH_ACT,
+#endif
+		.upper_margin = 1,
+		.lower_margin = 17,
+		.vsync_len = 2,
+	},
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_modes = migor_lcd_modes,
+		.num_modes = ARRAY_SIZE(migor_lcd_modes),
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+#elif defined(CONFIG_SH_MIGOR_QVGA)
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_modes = migor_lcd_modes,
+		.num_modes = ARRAY_SIZE(migor_lcd_modes),
+		.panel_cfg = {
+			.width = 49,	/* 2.4 inch */
+			.height = 37,
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+			/* set 1s delay to encourage fsync() */
+			.deferred_io_msec = 1000,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+static DEFINE_MUTEX(camera_lock);
+
+static void camera_power_on(int is_tw)
+{
+	mutex_lock(&camera_lock);
+
+	/* Use 10 MHz VIO_CKO instead of 24 MHz to work
+	 * around signal quality issues on Panel Board V2.1.
+	 */
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 10000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	/* use VIO_RST to take camera out of reset */
+	mdelay(10);
+	if (is_tw) {
+		gpio_set_value(GPIO_PTT2, 0);
+		gpio_set_value(GPIO_PTT0, 0);
+	} else {
+		gpio_set_value(GPIO_PTT0, 1);
+	}
+	gpio_set_value(GPIO_PTT3, 0);
+	mdelay(10);
+	gpio_set_value(GPIO_PTT3, 1);
+	mdelay(10); /* wait to let chip come out of reset */
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	gpio_set_value(GPIO_PTT3, 0);
+	mutex_unlock(&camera_lock);
+}
+
+static int ov7725_power(struct device *dev, int mode)
+{
+	if (mode)
+		camera_power_on(0);
+	else
+		camera_power_off();
+
+	return 0;
+}
+
+static int tw9910_power(struct device *dev, int mode)
+{
+	if (mode)
+		camera_power_on(1);
+	else
+		camera_power_off();
+
+	return 0;
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct resource sdhi_cn9_resources[] = {
+	[0] = {
+		.name	= "SDHI",
+		.start	= 0x04ce0000,
+		.end	= 0x04ce00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi_cn9_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi_cn9_resources),
+	.resource	= sdhi_cn9_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi_data,
+	},
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = evt2irq(0x6c0), /* IRQ6 */
+	},
+	{
+		I2C_BOARD_INFO("wm8978", 0x1a),
+	},
+};
+
+static struct i2c_board_info migor_i2c_camera[] = {
+	{
+		I2C_BOARD_INFO("ov772x", 0x21),
+	},
+	{
+		I2C_BOARD_INFO("tw9910", 0x45),
+	},
+};
+
+static struct ov772x_camera_info ov7725_info;
+
+static struct soc_camera_link ov7725_link = {
+	.power		= ov7725_power,
+	.board_info	= &migor_i2c_camera[0],
+	.i2c_adapter_id	= 0,
+	.priv		= &ov7725_info,
+};
+
+static struct tw9910_video_info tw9910_info = {
+	.buswidth	= SOCAM_DATAWIDTH_8,
+	.mpout		= TW9910_MPO_FIELD,
+};
+
+static struct soc_camera_link tw9910_link = {
+	.power		= tw9910_power,
+	.board_info	= &migor_i2c_camera[1],
+	.i2c_adapter_id	= 0,
+	.priv		= &tw9910_info,
+};
+
+static struct platform_device migor_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &ov7725_link,
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &tw9910_link,
+		},
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+	&sdhi_cn9_device,
+	&migor_camera[0],
+	&migor_camera[1],
+};
+
+extern char migor_sdram_enter_start;
+extern char migor_sdram_enter_end;
+extern char migor_sdram_leave_start;
+extern char migor_sdram_leave_end;
+
+static int __init migor_devices_setup(void)
+{
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+					&migor_sdram_enter_start,
+					&migor_sdram_enter_end,
+					&migor_sdram_leave_start,
+					&migor_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* Let D11 LED show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit D12 LED show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
+	gpio_request(GPIO_FN_IRQ0, NULL);
+	__raw_writel(0x00003400, BSC_CS4BCR);
+	__raw_writel(0x00110080, BSC_CS4WCR);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN1, NULL);
+	gpio_request(GPIO_FN_KEYIN2, NULL);
+	gpio_request(GPIO_FN_KEYIN3, NULL);
+	gpio_request(GPIO_FN_KEYIN4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+
+	/* NAND Flash */
+	gpio_request(GPIO_FN_CS6A_CE2B, NULL);
+	__raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+	gpio_request(GPIO_PTA1, NULL);
+	gpio_direction_input(GPIO_PTA1);
+
+	/* SDHI */
+	gpio_request(GPIO_FN_SDHICD, NULL);
+	gpio_request(GPIO_FN_SDHIWP, NULL);
+	gpio_request(GPIO_FN_SDHID3, NULL);
+	gpio_request(GPIO_FN_SDHID2, NULL);
+	gpio_request(GPIO_FN_SDHID1, NULL);
+	gpio_request(GPIO_FN_SDHID0, NULL);
+	gpio_request(GPIO_FN_SDHICMD, NULL);
+	gpio_request(GPIO_FN_SDHICLK, NULL);
+
+	/* Touch Panel */
+	gpio_request(GPIO_FN_IRQ6, NULL);
+
+	/* LCD Panel */
+#ifdef CONFIG_SH_MIGOR_QVGA /* LCDC - QVGA - Enable SYS Interface signals */
+	gpio_request(GPIO_FN_LCDD17, NULL);
+	gpio_request(GPIO_FN_LCDD16, NULL);
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDRS, NULL);
+	gpio_request(GPIO_FN_LCDCS, NULL);
+	gpio_request(GPIO_FN_LCDRD, NULL);
+	gpio_request(GPIO_FN_LCDWR, NULL);
+	gpio_request(GPIO_PTH2, NULL); /* LCD_DON */
+	gpio_direction_output(GPIO_PTH2, 1);
+#endif
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA /* LCDC - WVGA - Enable RGB Interface signals */
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+#endif
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTT3, NULL); /* VIO_RST */
+	gpio_direction_output(GPIO_PTT3, 0);
+	gpio_request(GPIO_PTT2, NULL); /* TV_IN_EN */
+	gpio_direction_output(GPIO_PTT2, 1);
+	gpio_request(GPIO_PTT0, NULL); /* CAM_EN */
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	gpio_direction_output(GPIO_PTT0, 0);
+#else
+	gpio_direction_output(GPIO_PTT0, 1);
+#endif
+	__raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
+	/* SIU: Port B */
+	gpio_request(GPIO_FN_SIUBOLR, NULL);
+	gpio_request(GPIO_FN_SIUBOBT, NULL);
+	gpio_request(GPIO_FN_SIUBISLD, NULL);
+	gpio_request(GPIO_FN_SIUBOSLD, NULL);
+	gpio_request(GPIO_FN_SIUMCKB, NULL);
+
+	/*
+	 * The original driver sets SIUB OLR/OBT, ILR/IBT, and SIUA OLR/OBT to
+	 * output. Need only SIUB, set to output for master mode (table 34.2)
+	 */
+	__raw_writew(__raw_readw(PORT_MSELCRA) | 1, PORT_MSELCRA);
+
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+arch_initcall(migor_devices_setup);
+
+/* Return the board specific boot mode pin configuration */
+static int migor_mode_pins(void)
+{
+	/* MD0=1, MD1=1, MD2=0: Clock Mode 3
+	 * MD3=0: 16-bit Area0 Bus Width
+	 * MD5=1: Little Endian
+	 * TSTMD=1, MD8=0: Test Mode Disabled
+	 */
+	return MODE_PIN0 | MODE_PIN1 | MODE_PIN5;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_mode_pins		= migor_mode_pins,
+};
diff --git a/kernel/arch/sh/boards/mach-r2d/Kconfig b/kernel/arch/sh/boards/mach-r2d/Kconfig
new file mode 100644
index 000000000..8122a9667
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-r2d/Kconfig
@@ -0,0 +1,23 @@
+if SH_RTS7751R2D
+
+menu "RTS7751R2D Board Revision"
+
+config RTS7751R2D_PLUS
+	bool "R2D-PLUS"
+	help
+	  Selecting this option will configure the kernel for R2D-PLUS.
+
+	  R2D-PLUS is the smaller of the two R2D board versions, equipped
+	  with a single PCI slot.
+
+config RTS7751R2D_1
+	bool "R2D-1"
+	help
+	  Selecting this option will configure the kernel for R2D-1.
+
+	  R2D-1 is the larger of the two R2D board versions, equipped
+	  with two PCI slots.
+endmenu
+
+endif
+
diff --git a/kernel/arch/sh/boards/mach-r2d/Makefile b/kernel/arch/sh/boards/mach-r2d/Makefile
new file mode 100644
index 000000000..0d4c75a72
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-r2d/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RTS7751R2D specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-r2d/irq.c b/kernel/arch/sh/boards/mach-r2d/irq.c
new file mode 100644
index 000000000..574f009c3
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-r2d/irq.c
@@ -0,0 +1,155 @@
+/*
+ * linux/arch/sh/boards/renesas/rts7751r2d/irq.c
+ *
+ * Copyright (C) 2007  Magnus Damm
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Renesas Technology Sales RTS7751R2D Support, R2D-PLUS and R2D-1.
+ *
+ * Modified for RTS7751R2D by
+ * Atom Create Engineering Co., Ltd. 2002.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach/r2d.h>
+
+#define R2D_NR_IRL 13
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources (R2D-1 and R2D-PLUS) */
+	EXT,              /* EXT_INT0-3 */
+	RTC_T, RTC_A,     /* Real Time Clock */
+	AX88796,          /* Ethernet controller (R2D-1 board) */
+	KEY,              /* Key input (R2D-PLUS board) */
+	SDCARD,           /* SD Card */
+	CF_CD, CF_IDE,    /* CF Card Detect + CF IDE */
+	SM501,            /* SM501 aka Voyager */
+	PCI_INTD_RTL8139, /* Ethernet controller */
+	PCI_INTC_PCI1520, /* Cardbus/PCMCIA bridge */
+	PCI_INTB_RTL8139, /* Ethernet controller with HUB (R2D-PLUS board) */
+	PCI_INTB_SLOT,    /* PCI Slot 3.3v (R2D-1 board) */
+	PCI_INTA_SLOT,    /* PCI Slot 3.3v */
+	TP,               /* Touch Panel */
+};
+
+#ifdef CONFIG_RTS7751R2D_1
+
+/* Vectors for R2D-1 */
+static struct intc_vect vectors_r2d_1[] __initdata = {
+	INTC_IRQ(EXT, IRQ_EXT),
+	INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
+	INTC_IRQ(AX88796, IRQ_AX88796), INTC_IRQ(SDCARD, IRQ_SDCARD),
+	INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE), /* ng */
+	INTC_IRQ(SM501, IRQ_VOYAGER),
+	INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
+	INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
+	INTC_IRQ(PCI_INTB_SLOT, IRQ_PCI_INTB),
+	INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
+	INTC_IRQ(TP, IRQ_TP),
+};
+
+/* IRLMSK mask register layout for R2D-1 */
+static struct intc_mask_reg mask_registers_r2d_1[] __initdata = {
+	{ 0xa4000000, 0, 16, /* IRLMSK */
+	  { TP, PCI_INTA_SLOT, PCI_INTB_SLOT,
+	    PCI_INTC_PCI1520, PCI_INTD_RTL8139,
+	    SM501, CF_IDE, CF_CD, SDCARD, AX88796,
+	    RTC_A, RTC_T, 0, 0, 0, EXT } },
+};
+
+/* IRLn to IRQ table for R2D-1 */
+static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = {
+	IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
+	IRQ_VOYAGER, IRQ_AX88796, IRQ_RTC_A, IRQ_RTC_T,
+	IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
+	IRQ_TP,
+};
+
+static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1,
+			 NULL, mask_registers_r2d_1, NULL, NULL);
+
+#endif /* CONFIG_RTS7751R2D_1 */
+
+#ifdef CONFIG_RTS7751R2D_PLUS
+
+/* Vectors for R2D-PLUS */
+static struct intc_vect vectors_r2d_plus[] __initdata = {
+	INTC_IRQ(EXT, IRQ_EXT),
+	INTC_IRQ(RTC_T, IRQ_RTC_T), INTC_IRQ(RTC_A, IRQ_RTC_A),
+	INTC_IRQ(KEY, IRQ_KEY), INTC_IRQ(SDCARD, IRQ_SDCARD),
+	INTC_IRQ(CF_CD, IRQ_CF_CD), INTC_IRQ(CF_IDE, IRQ_CF_IDE),
+	INTC_IRQ(SM501, IRQ_VOYAGER),
+	INTC_IRQ(PCI_INTD_RTL8139, IRQ_PCI_INTD),
+	INTC_IRQ(PCI_INTC_PCI1520, IRQ_PCI_INTC),
+	INTC_IRQ(PCI_INTB_RTL8139, IRQ_PCI_INTB),
+	INTC_IRQ(PCI_INTA_SLOT, IRQ_PCI_INTA),
+	INTC_IRQ(TP, IRQ_TP),
+};
+
+/* IRLMSK mask register layout for R2D-PLUS */
+static struct intc_mask_reg mask_registers_r2d_plus[] __initdata = {
+	{ 0xa4000000, 0, 16, /* IRLMSK */
+	  { TP, PCI_INTA_SLOT, PCI_INTB_RTL8139,
+	    PCI_INTC_PCI1520, PCI_INTD_RTL8139,
+	    SM501, CF_IDE, CF_CD, SDCARD, KEY,
+	    RTC_A, RTC_T, 0, 0, 0, EXT } },
+};
+
+/* IRLn to IRQ table for R2D-PLUS */
+static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = {
+	IRQ_PCI_INTD, IRQ_CF_IDE, IRQ_CF_CD, IRQ_PCI_INTC,
+	IRQ_VOYAGER, IRQ_KEY, IRQ_RTC_A, IRQ_RTC_T,
+	IRQ_SDCARD, IRQ_PCI_INTA, IRQ_PCI_INTB, IRQ_EXT,
+	IRQ_TP,
+};
+
+static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus,
+			 NULL, mask_registers_r2d_plus, NULL, NULL);
+
+#endif /* CONFIG_RTS7751R2D_PLUS */
+
+static unsigned char irl2irq[R2D_NR_IRL];
+
+int rts7751r2d_irq_demux(int irq)
+{
+	if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
+		return irq;
+
+	return irl2irq[irq];
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_rts7751r2d_IRQ(void)
+{
+	struct intc_desc *d;
+
+	switch (__raw_readw(PA_VERREG) & 0xf0) {
+#ifdef CONFIG_RTS7751R2D_PLUS
+	case 0x10:
+		printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
+		d = &intc_desc_r2d_plus;
+		memcpy(irl2irq, irl2irq_r2d_plus, R2D_NR_IRL);
+		break;
+#endif
+#ifdef CONFIG_RTS7751R2D_1
+	case 0x00: /* according to manual */
+	case 0x30: /* in reality */
+		printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
+		d = &intc_desc_r2d_1;
+		memcpy(irl2irq, irl2irq_r2d_1, R2D_NR_IRL);
+		break;
+#endif
+	default:
+		printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
+		       __raw_readw(PA_VERREG));
+		return;
+	}
+
+	register_intc_controller(d);
+}
diff --git a/kernel/arch/sh/boards/mach-r2d/setup.c b/kernel/arch/sh/boards/mach-r2d/setup.c
new file mode 100644
index 000000000..4b98a5251
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-r2d/setup.c
@@ -0,0 +1,308 @@
+/*
+ * Renesas Technology Sales RTS7751R2D Support.
+ *
+ * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2004 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/ata_platform.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/pm.h>
+#include <linux/fb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <asm/machvec.h>
+#include <mach/r2d.h>
+#include <asm/io.h>
+#include <asm/io_trapped.h>
+#include <asm/spi.h>
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_AREA5_IO + 0x1000,
+		.end	= PA_AREA5_IO + 0x1000 + 0x10 - 0x2,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PA_AREA5_IO + 0x80c,
+		.end	= PA_AREA5_IO + 0x80c,
+		.flags	= IORESOURCE_MEM,
+	},
+#ifndef CONFIG_RTS7751R2D_1 /* For R2D-1 polling is preferred */
+	[2] = {
+		.start	= IRQ_CF_IDE,
+		.flags	= IORESOURCE_IRQ,
+	},
+#endif
+};
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device  = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev	= {
+		.platform_data	= &pata_info,
+	},
+};
+
+static struct spi_board_info spi_bus[] = {
+	{
+		.modalias	= "rtc-r9701",
+		.max_speed_hz	= 1000000,
+		.mode		= SPI_MODE_3,
+	},
+};
+
+static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
+{
+	BUG_ON(cs != 0);  /* Single Epson RTC-9701JE attached on CS0 */
+	__raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
+}
+
+static struct sh_spi_info spi_info = {
+	.num_chipselect = 1,
+	.chip_select = r2d_chip_select,
+};
+
+static struct resource spi_sh_sci_resources[] = {
+	{
+		.start	= 0xffe00000,
+		.end	= 0xffe0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device spi_sh_sci_device  = {
+	.name		= "spi_sh_sci",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(spi_sh_sci_resources),
+	.resource	= spi_sh_sci_resources,
+	.dev	= {
+		.platform_data	= &spi_info,
+	},
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OUTPORT,
+		.end	= PA_OUTPORT,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= 0x10000000,
+		.end	= 0x13e00000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= 0x13e00000,
+		.end	= 0x13ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= IRQ_VOYAGER,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode = {
+	.pixclock	= 35714,
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 50,
+	.upper_margin	= 35,
+	.lower_margin	= 0,
+	.hsync_len	= 96,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.flags		= (SM501FB_FLAG_USE_INIT_MODE |
+			   SM501FB_FLAG_USE_HWCURSOR |
+			   SM501FB_FLAG_USE_HWACCEL |
+			   SM501FB_FLAG_DISABLE_AT_EXIT),
+
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+	.flags		= SM501_FBPD_SWAP_FB_ENDIAN,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.devices	= SM501_USE_USB_HOST | SM501_USE_UART0,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct mtd_partition r2d_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Environment",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(r2d_partitions),
+	.parts		= r2d_partitions,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x00000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct platform_device *rts7751r2d_devices[] __initdata = {
+	&sm501_device,
+	&heartbeat_device,
+	&spi_sh_sci_device,
+};
+
+/*
+ * The CF is connected with a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+	.resource		= cf_ide_resources,
+	.num_resources		= 2,
+	.minimum_bus_width	= 16,
+};
+
+static int __init rts7751r2d_devices_setup(void)
+{
+	if (register_trapped_io(&cf_trapped_io) == 0)
+		platform_device_register(&cf_ide_device);
+
+	if (mach_is_r2d_plus())
+		platform_device_register(&flash_device);
+
+	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+
+	return platform_add_devices(rts7751r2d_devices,
+				    ARRAY_SIZE(rts7751r2d_devices));
+}
+device_initcall(rts7751r2d_devices_setup);
+
+static void rts7751r2d_power_off(void)
+{
+	__raw_writew(0x0001, PA_POWOFF);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init rts7751r2d_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+	u16 ver = __raw_readw(PA_VERREG);
+
+	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
+
+	printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
+					(ver >> 4) & 0xf, ver & 0xf);
+
+	__raw_writew(0x0000, PA_OUTPORT);
+	pm_power_off = rts7751r2d_power_off;
+
+	/* sm501 dram configuration:
+	 * ColSizeX = 11 - External Memory Column Size: 256 words.
+	 * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
+	 * RstX = 1 - External Memory Reset: Normal.
+	 * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
+	 * BwC =  1 - Local Memory Block Write Cycle Time: 2 clocks.
+	 * BwP =  1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
+	 * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
+	 * Rst = 1 - Internal Memory Reset: Normal.
+	 * RA = 1 - Internal Memory Remain in Active State: Do not remain.
+	 */
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rts7751r2d __initmv = {
+	.mv_name		= "RTS7751R2D",
+	.mv_setup		= rts7751r2d_setup,
+	.mv_init_irq		= init_rts7751r2d_IRQ,
+	.mv_irq_demux		= rts7751r2d_irq_demux,
+};
diff --git a/kernel/arch/sh/boards/mach-rsk/Kconfig b/kernel/arch/sh/boards/mach-rsk/Kconfig
new file mode 100644
index 000000000..458a11ffd
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-rsk/Kconfig
@@ -0,0 +1,28 @@
+if SH_RSK
+
+choice
+	prompt "RSK+ options"
+	default SH_RSK7203
+
+config SH_RSK7201
+	bool "RSK7201"
+	depends on CPU_SUBTYPE_SH7201
+
+config SH_RSK7203
+	bool "RSK7203"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_RSK7264
+	bool "RSK2+SH7264"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on CPU_SUBTYPE_SH7264
+
+config SH_RSK7269
+	bool "RSK2+SH7269"
+	select ARCH_REQUIRE_GPIOLIB
+	depends on CPU_SUBTYPE_SH7269
+
+endchoice
+
+endif
diff --git a/kernel/arch/sh/boards/mach-rsk/Makefile b/kernel/arch/sh/boards/mach-rsk/Makefile
new file mode 100644
index 000000000..6a4e1b538
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-rsk/Makefile
@@ -0,0 +1,4 @@
+obj-y				:= setup.o
+obj-$(CONFIG_SH_RSK7203)	+= devices-rsk7203.o
+obj-$(CONFIG_SH_RSK7264)	+= devices-rsk7264.o
+obj-$(CONFIG_SH_RSK7269)	+= devices-rsk7269.o
diff --git a/kernel/arch/sh/boards/mach-rsk/devices-rsk7203.c b/kernel/arch/sh/boards/mach-rsk/devices-rsk7203.c
new file mode 100644
index 000000000..a8089f79d
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -0,0 +1,140 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <cpu/sh7203.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct gpio_led rsk7203_gpio_leds[] = {
+	{
+		.name			= "green",
+		.gpio			= GPIO_PE10,
+		.active_low		= 1,
+	}, {
+		.name			= "orange",
+		.default_trigger	= "nand-disk",
+		.gpio			= GPIO_PE12,
+		.active_low		= 1,
+	}, {
+		.name			= "red:timer",
+		.default_trigger	= "timer",
+		.gpio			= GPIO_PC14,
+		.active_low		= 1,
+	}, {
+		.name			= "red:heartbeat",
+		.default_trigger	= "heartbeat",
+		.gpio			= GPIO_PE11,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data rsk7203_gpio_leds_info = {
+	.leds		= rsk7203_gpio_leds,
+	.num_leds	= ARRAY_SIZE(rsk7203_gpio_leds),
+};
+
+static struct platform_device led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_leds_info,
+	},
+};
+
+static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
+	{
+		.code		= BTN_0,
+		.gpio		= GPIO_PB0,
+		.active_low	= 1,
+		.desc		= "SW1",
+	}, {
+		.code		= BTN_1,
+		.gpio		= GPIO_PB1,
+		.active_low	= 1,
+		.desc		= "SW2",
+	}, {
+		.code		= BTN_2,
+		.gpio		= GPIO_PB2,
+		.active_low	= 1,
+		.desc		= "SW3",
+	},
+};
+
+static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
+	.buttons	= rsk7203_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(rsk7203_gpio_keys_table),
+	.poll_interval	= 50, /* default to 50ms */
+};
+
+static struct platform_device keys_device = {
+	.name		= "gpio-keys-polled",
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_keys_info,
+	},
+};
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smsc911x_device,
+	&led_device,
+	&keys_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	/* Select pins for SCIF0 */
+	gpio_request(GPIO_FN_TXD0, NULL);
+	gpio_request(GPIO_FN_RXD0, NULL);
+
+	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
+	__raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
+	gpio_request(GPIO_FN_IRQ0_PB, NULL);
+
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
diff --git a/kernel/arch/sh/boards/mach-rsk/devices-rsk7264.c b/kernel/arch/sh/boards/mach-rsk/devices-rsk7264.c
new file mode 100644
index 000000000..7251e37a8
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-rsk/devices-rsk7264.c
@@ -0,0 +1,58 @@
+/*
+ * RSK+SH7264 Support.
+ *
+ * Copyright (C) 2012 Renesas Electronics Europe
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x28000000,
+		.end		= 0x280000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 65,
+		.end		= 65,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *rsk7264_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init rsk7264_devices_setup(void)
+{
+	return platform_add_devices(rsk7264_devices,
+				    ARRAY_SIZE(rsk7264_devices));
+}
+device_initcall(rsk7264_devices_setup);
diff --git a/kernel/arch/sh/boards/mach-rsk/devices-rsk7269.c b/kernel/arch/sh/boards/mach-rsk/devices-rsk7269.c
new file mode 100644
index 000000000..4a544591d
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-rsk/devices-rsk7269.c
@@ -0,0 +1,60 @@
+/*
+ * RSK+SH7269 Support
+ *
+ * Copyright (C) 2012  Renesas Electronics Europe Ltd
+ * Copyright (C) 2012  Phil Edworthy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO,
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x240000ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 85,
+		.end		= 85,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct platform_device *rsk7269_devices[] __initdata = {
+	&smsc911x_device,
+};
+
+static int __init rsk7269_devices_setup(void)
+{
+	return platform_add_devices(rsk7269_devices,
+				    ARRAY_SIZE(rsk7269_devices));
+}
+device_initcall(rsk7269_devices_setup);
diff --git a/kernel/arch/sh/boards/mach-rsk/setup.c b/kernel/arch/sh/boards/mach-rsk/setup.c
new file mode 100644
index 000000000..2685ea03b
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-rsk/setup.c
@@ -0,0 +1,90 @@
+/*
+ * Renesas Technology Europe RSK+ Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Peter Griffin <pgriffin@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition rsk_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.parts			= rsk_partitions,
+	.nr_parts		= ARRAY_SIZE(rsk_partitions),
+	.width			= 2,
+	.part_probe_types	= part_probes,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct platform_device *rsk_devices[] __initdata = {
+	&flash_device,
+};
+
+static int __init rsk_devices_setup(void)
+{
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	return platform_add_devices(rsk_devices,
+				    ARRAY_SIZE(rsk_devices));
+}
+device_initcall(rsk_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk __initmv = {
+	.mv_name        = "RSK+",
+};
diff --git a/kernel/arch/sh/boards/mach-sdk7780/Kconfig b/kernel/arch/sh/boards/mach-sdk7780/Kconfig
new file mode 100644
index 000000000..065f1df09
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7780/Kconfig
@@ -0,0 +1,16 @@
+if SH_SDK7780
+
+choice
+	prompt "SDK7780 options"
+	default SH_SDK7780_BASE
+
+config SH_SDK7780_BASE
+	bool "SDK7780 with base-board support"
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Selecting this option will enable support for the expansion
+	  baseboard devices. If in doubt, say Y.
+
+endchoice
+
+endif
diff --git a/kernel/arch/sh/boards/mach-sdk7780/Makefile b/kernel/arch/sh/boards/mach-sdk7780/Makefile
new file mode 100644
index 000000000..3d8f0befc
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7780/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the SDK7780 specific parts of the kernel
+#
+obj-y	 := setup.o irq.o
+
diff --git a/kernel/arch/sh/boards/mach-sdk7780/irq.c b/kernel/arch/sh/boards/mach-sdk7780/irq.c
new file mode 100644
index 000000000..e5f7564f2
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/renesas/sdk7780/irq.c
+ *
+ * Renesas Technology Europe SDK7780 Support.
+ *
+ * Copyright (C) 2008  Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <mach/sdk7780.h>
+
+enum {
+	UNUSED = 0,
+	/* board specific interrupt sources */
+	SMC91C111,	/* Ethernet controller */
+};
+
+static struct intc_vect fpga_vectors[] __initdata = {
+	INTC_IRQ(SMC91C111, IRQ_ETHERNET),
+};
+
+static struct intc_mask_reg fpga_mask_registers[] __initdata = {
+	{ 0, FPGA_IRQ0MR, 16,
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    0, 0, 0, SMC91C111, 0, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors,
+			 NULL, fpga_mask_registers, NULL, NULL);
+
+void __init init_sdk7780_IRQ(void)
+{
+	printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
+
+	__raw_writew(0xFFFF, FPGA_IRQ0MR);
+	/* Setup IRL 0-3 */
+	__raw_writew(0x0003, FPGA_IMSR);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	register_intc_controller(&fpga_intc_desc);
+}
diff --git a/kernel/arch/sh/boards/mach-sdk7780/setup.c b/kernel/arch/sh/boards/mach-sdk7780/setup.c
new file mode 100644
index 000000000..2241659c3
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7780/setup.c
@@ -0,0 +1,99 @@
+/*
+ * arch/sh/boards/renesas/sdk7780/setup.c
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/machvec.h>
+#include <mach/sdk7780.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+
+#define GPIO_PECR        0xFFEA0008
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_ETHERNET,
+		.end    = IRQ_ETHERNET,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *sdk7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init sdk7780_devices_setup(void)
+{
+	return platform_add_devices(sdk7780_devices,
+		ARRAY_SIZE(sdk7780_devices));
+}
+device_initcall(sdk7780_devices_setup);
+
+static void __init sdk7780_setup(char **cmdline_p)
+{
+	u16 ver = __raw_readw(FPGA_FPVERR);
+	u16 dateStamp = __raw_readw(FPGA_FPDATER);
+
+	printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
+	printk(KERN_INFO "Board version: %d (revision %d), "
+			 "FPGA version: %d (revision %d), datestamp : %d\n",
+			 (ver >> 12) & 0xf, (ver >> 8) & 0xf,
+			 (ver >>  4) & 0xf, ver & 0xf,
+			 dateStamp);
+
+	/* Setup pin mux'ing for PCIC */
+	__raw_writew(0x0000, GPIO_PECR);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name        = "Renesas SDK7780-R3" ,
+	.mv_setup		= sdk7780_setup,
+	.mv_init_irq	= init_sdk7780_IRQ,
+};
+
diff --git a/kernel/arch/sh/boards/mach-sdk7786/Makefile b/kernel/arch/sh/boards/mach-sdk7786/Makefile
new file mode 100644
index 000000000..45d32e359
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/Makefile
@@ -0,0 +1,4 @@
+obj-y	:= fpga.o irq.o nmi.o setup.o
+
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
+obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
diff --git a/kernel/arch/sh/boards/mach-sdk7786/fpga.c b/kernel/arch/sh/boards/mach-sdk7786/fpga.c
new file mode 100644
index 000000000..3e4ec66a0
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/fpga.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/bcd.h>
+#include <mach/fpga.h>
+#include <asm/sizes.h>
+
+#define FPGA_REGS_OFFSET	0x03fff800
+#define FPGA_REGS_SIZE		0x490
+
+/*
+ * The FPGA can be mapped in any of the generally available areas,
+ * so we attempt to scan for it using the fixed SRSTR read magic.
+ *
+ * Once the FPGA is located, the rest of the mapping data for the other
+ * components can be determined dynamically from its section mapping
+ * registers.
+ */
+static void __iomem *sdk7786_fpga_probe(void)
+{
+	unsigned long area;
+	void __iomem *base;
+
+	/*
+	 * Iterate over all of the areas where the FPGA could be mapped.
+	 * The possible range is anywhere from area 0 through 6, area 7
+	 * is reserved.
+	 */
+	for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) {
+		base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE);
+		if (!base) {
+			/* Failed to remap this area, move along. */
+			continue;
+		}
+
+		if (ioread16(base + SRSTR) == SRSTR_MAGIC)
+			return base;	/* Found it! */
+
+		iounmap(base);
+	}
+
+	return NULL;
+}
+
+void __iomem *sdk7786_fpga_base;
+
+void __init sdk7786_fpga_init(void)
+{
+	u16 version, date;
+
+	sdk7786_fpga_base = sdk7786_fpga_probe();
+	if (unlikely(!sdk7786_fpga_base)) {
+		panic("FPGA detection failed.\n");
+		return;
+	}
+
+	version = fpga_read_reg(FPGAVR);
+	date = fpga_read_reg(FPGADR);
+
+	pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n",
+		bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf),
+		((date >> 12) & 0xf) + 2000,
+		(date >> 8) & 0xf, bcd2bin(date & 0xff));
+}
diff --git a/kernel/arch/sh/boards/mach-sdk7786/gpio.c b/kernel/arch/sh/boards/mach-sdk7786/gpio.c
new file mode 100644
index 000000000..f71ce09d4
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/gpio.c
@@ -0,0 +1,49 @@
+/*
+ * SDK7786 FPGA USRGPIR Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/fpga.h>
+
+#define NR_FPGA_GPIOS	8
+
+static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
+	"in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
+};
+
+static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	/* always in */
+	return 0;
+}
+
+static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
+}
+
+static struct gpio_chip usrgpir_gpio_chip = {
+	.label			= "sdk7786-fpga",
+	.names			= usrgpir_gpio_names,
+	.direction_input	= usrgpir_gpio_direction_input,
+	.get			= usrgpir_gpio_get,
+	.base			= -1, /* don't care */
+	.ngpio			= NR_FPGA_GPIOS,
+};
+
+static int __init usrgpir_gpio_setup(void)
+{
+	return gpiochip_add(&usrgpir_gpio_chip);
+}
+device_initcall(usrgpir_gpio_setup);
diff --git a/kernel/arch/sh/boards/mach-sdk7786/irq.c b/kernel/arch/sh/boards/mach-sdk7786/irq.c
new file mode 100644
index 000000000..46943a0da
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/irq.c
@@ -0,0 +1,48 @@
+/*
+ * SDK7786 FPGA IRQ Controller Support.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irq.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+
+enum {
+	ATA_IRQ_BIT		= 1,
+	SPI_BUSY_BIT		= 2,
+	LIRQ5_BIT		= 3,
+	LIRQ6_BIT		= 4,
+	LIRQ7_BIT		= 5,
+	LIRQ8_BIT		= 6,
+	KEY_IRQ_BIT		= 7,
+	PEN_IRQ_BIT		= 8,
+	ETH_IRQ_BIT		= 9,
+	RTC_ALARM_BIT		= 10,
+	CRYSTAL_FAIL_BIT	= 12,
+	ETH_PME_BIT		= 14,
+};
+
+void __init sdk7786_init_irq(void)
+{
+	unsigned int tmp;
+
+	/* Enable priority encoding for all IRLs */
+	fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR);
+
+	/* Clear FPGA interrupt status registers */
+	fpga_write_reg(0x0000, INTASR);
+	fpga_write_reg(0x0000, INTBSR);
+
+	/* Unmask FPGA interrupts */
+	tmp = fpga_read_reg(INTAMR);
+	tmp &= ~(1 << ETH_IRQ_BIT);
+	fpga_write_reg(tmp, INTAMR);
+
+	plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK);
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
diff --git a/kernel/arch/sh/boards/mach-sdk7786/nmi.c b/kernel/arch/sh/boards/mach-sdk7786/nmi.c
new file mode 100644
index 000000000..edcfa1f56
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/nmi.c
@@ -0,0 +1,83 @@
+/*
+ * SDK7786 FPGA NMI Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+
+enum {
+	NMI_MODE_MANUAL,
+	NMI_MODE_AUX,
+	NMI_MODE_MASKED,
+	NMI_MODE_ANY,
+	NMI_MODE_UNKNOWN,
+};
+
+/*
+ * Default to the manual NMI switch.
+ */
+static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
+
+static int __init nmi_mode_setup(char *str)
+{
+	if (!str)
+		return 0;
+
+	if (strcmp(str, "manual") == 0)
+		nmi_mode = NMI_MODE_MANUAL;
+	else if (strcmp(str, "aux") == 0)
+		nmi_mode = NMI_MODE_AUX;
+	else if (strcmp(str, "masked") == 0)
+		nmi_mode = NMI_MODE_MASKED;
+	else if (strcmp(str, "any") == 0)
+		nmi_mode = NMI_MODE_ANY;
+	else {
+		nmi_mode = NMI_MODE_UNKNOWN;
+		pr_warning("Unknown NMI mode %s\n", str);
+	}
+
+	printk("Set NMI mode to %d\n", nmi_mode);
+	return 0;
+}
+early_param("nmi_mode", nmi_mode_setup);
+
+void __init sdk7786_nmi_init(void)
+{
+	unsigned int source, mask, tmp;
+
+	switch (nmi_mode) {
+	case NMI_MODE_MANUAL:
+		source = NMISR_MAN_NMI;
+		mask = NMIMR_MAN_NMIM;
+		break;
+	case NMI_MODE_AUX:
+		source = NMISR_AUX_NMI;
+		mask = NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_ANY:
+		source = NMISR_MAN_NMI | NMISR_AUX_NMI;
+		mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_MASKED:
+	case NMI_MODE_UNKNOWN:
+	default:
+		source = mask = 0;
+		break;
+	}
+
+	/* Set the NMI source */
+	tmp = fpga_read_reg(NMISR);
+	tmp &= ~NMISR_MASK;
+	tmp |= source;
+	fpga_write_reg(tmp, NMISR);
+
+	/* And the IRQ masking */
+	fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
+}
diff --git a/kernel/arch/sh/boards/mach-sdk7786/setup.c b/kernel/arch/sh/boards/mach-sdk7786/setup.c
new file mode 100644
index 000000000..c29268bfd
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/setup.c
@@ -0,0 +1,269 @@
+/*
+ * Renesas Technology Europe SDK7786 Support.
+ *
+ * Copyright (C) 2010  Matt Fleming
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smsc911x.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <mach/fpga.h>
+#include <mach/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+#include <asm/clock.h>
+#include <asm/reboot.h>
+#include <asm/smp-ops.h>
+
+static struct resource heartbeat_resource = {
+	.start		= 0x07fff8b0,
+	.end		= 0x07fff8b0 + sizeof(u16) - 1,
+	.flags		= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= 0x07ffff00,
+		.end		= 0x07ffff00 + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= evt2irq(0x2c0),
+		.end		= evt2irq(0x2c0),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static struct resource smbus_fpga_resource = {
+	.start		= 0x07fff9e0,
+	.end		= 0x07fff9e0 + SZ_32 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_fpga_device = {
+	.name		= "i2c-sdk7786",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &smbus_fpga_resource,
+};
+
+static struct resource smbus_pcie_resource = {
+	.start		= 0x07fffc30,
+	.end		= 0x07fffc30 + SZ_32 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device smbus_pcie_device = {
+	.name		= "i2c-sdk7786",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= &smbus_pcie_resource,
+};
+
+static struct i2c_board_info __initdata sdk7786_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("max6900", 0x68),
+	},
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+	&heartbeat_device,
+	&smsc911x_device,
+	&smbus_fpga_device,
+	&smbus_pcie_device,
+};
+
+static int sdk7786_i2c_setup(void)
+{
+	unsigned int tmp;
+
+	/*
+	 * Hand over I2C control to the FPGA.
+	 */
+	tmp = fpga_read_reg(SBCR);
+	tmp &= ~SCBR_I2CCEN;
+	tmp |= SCBR_I2CMEN;
+	fpga_write_reg(tmp, SBCR);
+
+	return i2c_register_board_info(0, sdk7786_i2c_devices,
+				       ARRAY_SIZE(sdk7786_i2c_devices));
+}
+
+static int __init sdk7786_devices_setup(void)
+{
+	int ret;
+
+	ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices));
+	if (unlikely(ret != 0))
+		return ret;
+
+	return sdk7786_i2c_setup();
+}
+device_initcall(sdk7786_devices_setup);
+
+static int sdk7786_mode_pins(void)
+{
+	return fpga_read_reg(MODSWR);
+}
+
+/*
+ * FPGA-driven PCIe clocks
+ *
+ * Historically these include the oscillator, clock B (slots 2/3/4) and
+ * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
+ * everything under a single PCIe clocks enable bit that happens to map
+ * to the same bit position as the oscillator bit for earlier FPGA
+ * versions.
+ *
+ * Given that the legacy clocks have the side-effect of shutting the CPU
+ * off through the FPGA along with the PCI slots, we simply leave them in
+ * their initial state and don't bother registering them with the clock
+ * framework.
+ */
+static int sdk7786_pcie_clk_enable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
+	return 0;
+}
+
+static void sdk7786_pcie_clk_disable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
+}
+
+static struct sh_clk_ops sdk7786_pcie_clk_ops = {
+	.enable		= sdk7786_pcie_clk_enable,
+	.disable	= sdk7786_pcie_clk_disable,
+};
+
+static struct clk sdk7786_pcie_clk = {
+	.ops		= &sdk7786_pcie_clk_ops,
+};
+
+static struct clk_lookup sdk7786_pcie_cl = {
+	.con_id		= "pcie_plat_clk",
+	.clk		= &sdk7786_pcie_clk,
+};
+
+static int sdk7786_clk_init(void)
+{
+	struct clk *clk;
+	int ret;
+
+	/*
+	 * Only handle the EXTAL case, anyone interfacing a crystal
+	 * resonator will need to provide their own input clock.
+	 */
+	if (test_mode_pin(MODE_PIN9))
+		return -EINVAL;
+
+	clk = clk_get(NULL, "extal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+	ret = clk_set_rate(clk, 33333333);
+	clk_put(clk);
+
+	/*
+	 * Setup the FPGA clocks.
+	 */
+	ret = clk_register(&sdk7786_pcie_clk);
+	if (unlikely(ret)) {
+		pr_err("FPGA clock registration failed\n");
+		return ret;
+	}
+
+	clkdev_add(&sdk7786_pcie_cl);
+
+	return 0;
+}
+
+static void sdk7786_restart(char *cmd)
+{
+	fpga_write_reg(0xa5a5, SRSTR);
+}
+
+static void sdk7786_power_off(void)
+{
+	fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR);
+
+	/*
+	 * It can take up to 20us for the R8C to do its job, back off and
+	 * wait a bit until we've been shut off. Even though newer FPGA
+	 * versions don't set the ACK bit, the latency issue remains.
+	 */
+	while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0)
+		cpu_sleep();
+}
+
+/* Initialize the board */
+static void __init sdk7786_setup(char **cmdline_p)
+{
+	pr_info("Renesas Technology Europe SDK7786 support:\n");
+
+	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
+	sdk7786_fpga_init();
+	sdk7786_nmi_init();
+
+	pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
+
+	machine_ops.restart = sdk7786_restart;
+	pm_power_off = sdk7786_power_off;
+
+	register_smp_ops(&shx3_smp_ops);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sdk7786 __initmv = {
+	.mv_name		= "SDK7786",
+	.mv_setup		= sdk7786_setup,
+	.mv_mode_pins		= sdk7786_mode_pins,
+	.mv_clk_init		= sdk7786_clk_init,
+	.mv_init_irq		= sdk7786_init_irq,
+};
diff --git a/kernel/arch/sh/boards/mach-sdk7786/sram.c b/kernel/arch/sh/boards/mach-sdk7786/sram.c
new file mode 100644
index 000000000..c81c3abbe
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sdk7786/sram.c
@@ -0,0 +1,72 @@
+/*
+ * SDK7786 FPGA SRAM Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+#include <asm/sram.h>
+#include <asm/sizes.h>
+
+static int __init fpga_sram_init(void)
+{
+	unsigned long phys;
+	unsigned int area;
+	void __iomem *vaddr;
+	int ret;
+	u16 data;
+
+	/* Enable FPGA SRAM */
+	data = fpga_read_reg(LCLASR);
+	data |= LCLASR_FRAMEN;
+	fpga_write_reg(data, LCLASR);
+
+	/*
+	 * FPGA_SEL determines the area mapping
+	 */
+	area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
+	if (unlikely(area == LCLASR_AREA_MASK)) {
+		pr_err("FPGA memory unmapped.\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * The memory itself occupies a 2KiB range at the top of the area
+	 * immediately below the system registers.
+	 */
+	phys = (area << 26) + SZ_64M - SZ_4K;
+
+	/*
+	 * The FPGA SRAM resides in translatable physical space, so set
+	 * up a mapping prior to inserting it in to the pool.
+	 */
+	vaddr = ioremap(phys, SZ_2K);
+	if (unlikely(!vaddr)) {
+		pr_err("Failed remapping FPGA memory.\n");
+		return -ENXIO;
+	}
+
+	pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
+		"(area %d) to pool.\n",
+		SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
+
+	ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
+	if (unlikely(ret < 0)) {
+		pr_err("Failed adding memory\n");
+		iounmap(vaddr);
+		return ret;
+	}
+
+	return 0;
+}
+postcore_initcall(fpga_sram_init);
diff --git a/kernel/arch/sh/boards/mach-se/7206/Makefile b/kernel/arch/sh/boards/mach-se/7206/Makefile
new file mode 100644
index 000000000..5c9eaa053
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7206/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7206 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/7206/irq.c b/kernel/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 000000000..0db058e70
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,150 @@
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = __raw_readw(INTC_IPR01);
+	val &= mask;
+	__raw_writew(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = __raw_readw(INTC_IPR01);
+	val |= value;
+	__raw_writew(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(struct irq_data *data)
+{
+	unsigned short sts0,sts1;
+	unsigned int irq = data->irq;
+
+	if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
+		enable_se7206_irq(data);
+	/* FPGA isr clear */
+	sts0 = __raw_readw(INTSTS0);
+	sts1 = __raw_readw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	__raw_writew(sts0, INTSTS0);
+	__raw_writew(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA",
+	.irq_mask	= disable_se7206_irq,
+	.irq_unmask	= enable_se7206_irq,
+	.irq_eoi	= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq_get_irq_data(irq));
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
+
+	/* FPGA System register setup*/
+	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	__raw_writew(0x0001,INTSEL);
+}
diff --git a/kernel/arch/sh/boards/mach-se/7206/setup.c b/kernel/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 000000000..68883ec95
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,95 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+device_initcall(se7206_devices_setup);
+
+static int se7206_mode_pins(void)
+{
+	return MODE_PIN1 | MODE_PIN2;
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_init_irq		= init_se7206_IRQ,
+	.mv_mode_pins		= se7206_mode_pins,
+};
diff --git a/kernel/arch/sh/boards/mach-se/7343/Makefile b/kernel/arch/sh/boards/mach-se/7343/Makefile
new file mode 100644
index 000000000..4c3666a93
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7343/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7343 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/7343/irq.c b/kernel/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 000000000..1087dba9b
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,126 @@
+/*
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2012  Paul Mundt
+ *
+ * Based on linux/arch/sh/boards/se/7343/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
+#include <mach-se/mach/se7343.h>
+
+#define PA_CPLD_BASE_ADDR	0x11400000
+#define PA_CPLD_ST_REG		0x08	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG	0x0a	/* CPLD Interrupt mask register */
+
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
+
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
+
+	chip->irq_mask_ack(data);
+
+	mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
+
+	for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
+{
+	int i;
+
+	se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7343_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7343_irq_domain, i);
+
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
+	}
+}
+
+static void __init se7343_gc_init(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
+
+	irq_base = irq_linear_revmap(se7343_irq_domain, 0);
+
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+	ct->regs.mask = PA_CPLD_IMSK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+	if (unlikely(!se7343_irq_regs)) {
+		pr_err("Failed to remap CPLD\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	se7343_domain_init();
+	se7343_gc_init();
+}
diff --git a/kernel/arch/sh/boards/mach-se/7343/setup.c b/kernel/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 000000000..8ce4f2a20
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,181 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
+#include <linux/irqdomain.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x16000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	[1] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x17000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	{ },
+};
+
+static struct platform_device uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start  = 0x11800000,
+		.end    = 0x11800001,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0x11800002,
+		.end    = 0x11800003,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+	.sel15Kres		= 1,
+	.oc_enable		= 1,
+	.int_act_high		= 0,
+	.int_edge_triggered	= 0,
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(usb_resources),
+	.resource		= usb_resources,
+	.dev			= {
+		.platform_data	= &usb_platform_data,
+	},
+
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&uart_device,
+	&usb_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	/* Wire-up dynamic vectors */
+	serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTA);
+	serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTB);
+	usb_resources[2].start = usb_resources[2].end =
+		irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
+
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	__raw_writew(0xf900, FPGA_OUT);	/* FPGA */
+
+	__raw_writew(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_init_irq = init_7343se_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/770x/Makefile b/kernel/arch/sh/boards/mach-se/770x/Makefile
new file mode 100644
index 000000000..43ea14fee
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/770x/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 770x SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/770x/irq.c b/kernel/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 000000000..1028c17b8
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/kernel/arch/sh/boards/mach-se/770x/setup.c b/kernel/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 000000000..658326f44
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,188 @@
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach-se/mach/se.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh771x-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh771x-ether",
+	.id = 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	mrshpc_setup_windows();
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+	.mv_init_irq		= init_se_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/7721/Makefile b/kernel/arch/sh/boards/mach-se/7721/Makefile
new file mode 100644
index 000000000..7f0903098
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7721/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/7721/irq.c b/kernel/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 000000000..d85022ea3
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	__raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/kernel/arch/sh/boards/mach-se/7721/setup.c b/kernel/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 000000000..a0b3dba34
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,96 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach-se/mach/se7721.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	mrshpc_setup_windows();
+	return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	__raw_writew(0x0000, 0xA405010C);	/* PGCR */
+	__raw_writew(0x0000, 0xA405010E);	/* PHCR */
+	__raw_writew(0x00AA, 0xA4050118);	/* PPCR */
+	__raw_writew(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/7722/Makefile b/kernel/arch/sh/boards/mach-se/7722/Makefile
new file mode 100644
index 000000000..869437338
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7722/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/7722/irq.c b/kernel/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 000000000..00e699232
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,119 @@
+/*
+ * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ * Copyright (C) 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define DRV_NAME "SE7722-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <asm/sizes.h>
+#include <mach-se/mach/se7722.h>
+
+#define IRQ01_BASE_ADDR	0x11800000
+#define IRQ01_MODE_REG	0
+#define IRQ01_STS_REG	4
+#define IRQ01_MASK_REG	8
+
+static void __iomem *se7722_irq_regs;
+struct irq_domain *se7722_irq_domain;
+
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
+
+	chip->irq_mask_ack(data);
+
+	mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
+
+	for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7722_domain_init(void)
+{
+	int i;
+
+	se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7722_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
+
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7722_irq_domain, i);
+
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
+	}
+}
+
+static void __init se7722_gc_init(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
+
+	irq_base = irq_linear_revmap(se7722_irq_domain, 0);
+
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+	ct->regs.mask = IRQ01_MASK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+ * Initialize FPGA IRQs
+ */
+void __init init_se7722_IRQ(void)
+{
+	se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
+	if (unlikely(!se7722_irq_regs)) {
+		printk("Failed to remap IRQ01 regs\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	se7722_domain_init();
+	se7722_gc_init();
+}
diff --git a/kernel/arch/sh/boards/mach-se/7722/setup.c b/kernel/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 000000000..e04e2bc46
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2012 Paul Mundt
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/irqdomain.h>
+#include <linux/smc91x.h>
+#include <linux/sh_intc.h>
+#include <mach-se/mach/se7722.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <cpu/sh7722.h>
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+	&sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	mrshpc_setup_windows();
+
+	/* Wire-up dynamic vectors */
+	cf_ide_resources[2].start = cf_ide_resources[2].end =
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
+
+	smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
+
+	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	__raw_writew(0x010D, FPGA_OUT);    /* FPGA */
+
+	__raw_writew(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	__raw_writew(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	__raw_writew(0x0003, PORT_PSELB);
+	__raw_writew(0xe000, PORT_PSELC);
+	__raw_writew(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	__raw_writew(0x4020, PORT_PHCR);
+	__raw_writew(0x0000, PORT_PLCR);
+	__raw_writew(0x0000, PORT_PMCR);
+	__raw_writew(0x0002, PORT_PRCR);
+	__raw_writew(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	__raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	__raw_writew(0x0000, PORT_PYCR);
+	__raw_writew(0x0000, PORT_PZCR);
+	__raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	__raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_init_irq		= init_se7722_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/7724/Makefile b/kernel/arch/sh/boards/mach-se/7724/Makefile
new file mode 100644
index 000000000..a08b36830
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7724/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o sdram.o
diff --git a/kernel/arch/sh/boards/mach-se/7724/irq.c b/kernel/arch/sh/boards/mach-se/7724/irq.c
new file mode 100644
index 000000000..5d1d3ec9a
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7724/irq.c
@@ -0,0 +1,145 @@
+/*
+ * linux/arch/sh/boards/se/7724/irq.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on  linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <linux/topology.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach-se/mach/se7724.h>
+
+struct fpga_irq {
+	unsigned long  sraddr;
+	unsigned long  mraddr;
+	unsigned short mask;
+	unsigned int   base;
+};
+
+static unsigned int fpga2irq(unsigned int irq)
+{
+	if (irq >= IRQ0_BASE &&
+	    irq <= IRQ0_END)
+		return IRQ0_IRQ;
+	else if (irq >= IRQ1_BASE &&
+		 irq <= IRQ1_END)
+		return IRQ1_IRQ;
+	else
+		return IRQ2_IRQ;
+}
+
+static struct fpga_irq get_fpga_irq(unsigned int irq)
+{
+	struct fpga_irq set;
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		set.sraddr = IRQ0_SR;
+		set.mraddr = IRQ0_MR;
+		set.mask   = IRQ0_MASK;
+		set.base   = IRQ0_BASE;
+		break;
+	case IRQ1_IRQ:
+		set.sraddr = IRQ1_SR;
+		set.mraddr = IRQ1_MR;
+		set.mask   = IRQ1_MASK;
+		set.base   = IRQ1_BASE;
+		break;
+	default:
+		set.sraddr = IRQ2_SR;
+		set.mraddr = IRQ2_MR;
+		set.mask   = IRQ2_MASK;
+		set.base   = IRQ2_BASE;
+		break;
+	}
+
+	return set;
+}
+
+static void disable_se7724_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	__raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
+}
+
+static void enable_se7724_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	__raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+}
+
+static struct irq_chip se7724_irq_chip __read_mostly = {
+	.name		= "SE7724-FPGA",
+	.irq_mask	= disable_se7724_irq,
+	.irq_unmask	= enable_se7724_irq,
+};
+
+static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	struct fpga_irq set = get_fpga_irq(irq);
+	unsigned short intv = __raw_readw(set.sraddr);
+	unsigned int ext_irq = set.base;
+
+	intv &= set.mask;
+
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(ext_irq);
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7724_IRQ(void)
+{
+	int irq_base, i;
+
+	__raw_writew(0xffff, IRQ0_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ1_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ2_MR);  /* mask all */
+	__raw_writew(0x0000, IRQ0_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ1_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ2_SR);  /* clear irq */
+	__raw_writew(0x002a, IRQ_MODE); /* set irq type */
+
+	irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
+				   SE7724_FPGA_IRQ_NR, numa_node_id());
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs for FPGA\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+		irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
+					      handle_level_irq, "level");
+
+	irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/kernel/arch/sh/boards/mach-se/7724/sdram.S b/kernel/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 000000000..6fa4734d0
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,131 @@
+/*
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+	.balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* CPG: setup clocks before restarting external memory */
+
+	ED 0xA4150024, 0x00004000 /* PLLCR */
+
+	mov.l	FRQCRA,r0
+	mov.l	@r0,r3
+	mov.l	KICK,r1
+	or	r1, r3
+	mov.l	r3, @r0
+
+	mov.l	LSTATS,r0
+	mov	#1,r1
+WAIT_LSTATS:
+	mov.l	@r0,r3
+	tst	r1,r3
+	bf	WAIT_LSTATS
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+FRQCRA:	.long	0xa4150000
+KICK:	.long	0x80000000
+LSTATS:	.long	0xa4150060
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/kernel/arch/sh/boards/mach-se/7724/setup.c b/kernel/arch/sh/boards/mach-se/7724/setup.c
new file mode 100644
index 000000000..4f6635a07
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7724/setup.c
@@ -0,0 +1,947 @@
+/*
+ * linux/arch/sh/boards/se/7724/setup.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/videodev2.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/clock.h>
+#include <asm/suspend.h>
+#include <cpu/sh7724.h>
+#include <mach-se/mach/se7724.h>
+
+/*
+ * SWx    1234 5678
+ * ------------------------------------
+ * SW31 : 1001 1100    : default
+ * SW32 : 0111 1111    : use on board flash
+ *
+ * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
+ *                          1 : Digital monitor
+ *                      b = 0 : VGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
+ */
+
+/*
+ * about sound
+ *
+ * This setup.c supports FSI slave mode.
+ * Please change J20, J21, J22 pin to 1-2 connection.
+ */
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x1a300300,
+		.end    = 0x1a30030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_SMC,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name	= "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* LCDC */
+static const struct fb_videomode lcdc_720p_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+	},
+};
+
+static const struct fb_videomode lcdc_vga_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 640,
+		.yres		= 480,
+		.left_margin	= 105,
+		.right_margin	= 50,
+		.hsync_len	= 96,
+		.upper_margin	= 33,
+		.lower_margin	= 10,
+		.vsync_len	= 2,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.clock_divider = 1,
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu0_info,
+	},
+};
+
+/* CEU1 */
+static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x9e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 1, /* "ceu1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu1_info,
+	},
+};
+
+/* FSI */
+/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xf80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+};
+
+static struct asoc_simple_card_info fsi_ak4642_info = {
+	.name		= "AK4642",
+	.card		= "FSIA-AK4642",
+	.codec		= "ak4642-codec.0-0012",
+	.platform	= "sh_fsi.0",
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.sysclk	= 11289600,
+	},
+};
+
+static struct platform_device fsi_ak4642_device = {
+	.name	= "asoc-simple-card",
+	.dev	= {
+		.platform_data	= &fsi_ak4642_info,
+	},
+};
+
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
+static struct sh_keysc_info keysc_info = {
+	.mode = SH_KEYSC_MODE_1,
+	.scan_timing = 3,
+	.delay = 50,
+	.keycodes = {
+		KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
+		KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
+		KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = evt2irq(0xd60),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh7724-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 1, /* USB1 */
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb1_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb1_gadget_resources),
+	.resource	= sh7724_usb1_gadget_resources,
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct resource sdhi0_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi0_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi0_cn7_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),
+	.resource       = sdhi0_cn7_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi1_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi1_cn8_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),
+	.resource       = sdhi1_cn8_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi1_data,
+	},
+};
+
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/ak881x.h>
+#include <media/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	/* With open J18 jumper address is 0x21 */
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x8e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+};
+
+static struct platform_device *ms7724se_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&lcdc_device,
+	&nor_flash_device,
+	&ceu0_device,
+	&ceu1_device,
+	&keysc_device,
+	&sh_eth_device,
+	&sh7724_usb0_host_device,
+	&sh7724_usb1_gadget_device,
+	&fsi_device,
+	&fsi_ak4642_device,
+	&sdhi0_cn7_device,
+	&sdhi1_cn8_device,
+	&irda_device,
+	&vou_device,
+};
+
+/* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4642", 0x12),
+	},
+};
+
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!__raw_readw(EEPROM_STAT))
+			return 1;
+		udelay(1);
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac;
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		__raw_writew(0x0, EEPROM_OP); /* read */
+		__raw_writew(i*2, EEPROM_ADR);
+		__raw_writew(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac = __raw_readw(EEPROM_DATA);
+		sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+		sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
+	}
+}
+
+#define SW4140    0xBA201000
+#define FPGA_OUT  0xBA200400
+#define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
+
+#define SW41_A    0x0100
+#define SW41_B    0x0200
+#define SW41_C    0x0400
+#define SW41_D    0x0800
+#define SW41_E    0x1000
+#define SW41_F    0x2000
+#define SW41_G    0x4000
+#define SW41_H    0x8000
+
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
+static int __init arch_setup(void)
+{
+	/* enable I2C device */
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	return 0;
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	u16 sw = __raw_readw(SW4140); /* select camera, monitor */
+	struct clk *clk;
+	u16 fpga_out;
+
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&ms7724se_sdram_enter_start,
+					&ms7724se_sdram_enter_end,
+					&ms7724se_sdram_leave_start,
+					&ms7724se_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* Reset Release */
+	fpga_out = __raw_readw(FPGA_OUT);
+	/* bit4: NTSC_PDN, bit5: NTSC_RESET */
+	fpga_out &= ~((1 << 1)  | /* LAN */
+		      (1 << 4)  | /* AK8813 PDN */
+		      (1 << 5)  | /* AK8813 RESET */
+		      (1 << 6)  | /* VIDEO DAC */
+		      (1 << 7)  | /* AK4643 */
+		      (1 << 8)  | /* IrDA */
+		      (1 << 12) | /* USB0 */
+		      (1 << 14)); /* RMII */
+	__raw_writew(fpga_out | (1 << 4), FPGA_OUT);
+
+	udelay(10);
+
+	/* AK8813 RESET */
+	__raw_writew(fpga_out | (1 << 5), FPGA_OUT);
+
+	udelay(10);
+
+	__raw_writew(fpga_out, FPGA_OUT);
+
+	/* turn on USB clocks, use external clock */
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable USB0 port */
+	__raw_writew(0x0600, 0xa40501d4);
+
+	/* enable USB1 port */
+	__raw_writew(0x0600, 0xa4050192);
+
+	/* enable IRQ 0,1,2 */
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ2, NULL);
+
+	/* enable SCIFA3 */
+	gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDRD,    NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+	platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+	platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN4,      NULL);
+	gpio_request(GPIO_FN_KEYIN3,      NULL);
+	gpio_request(GPIO_FN_KEYIN2,      NULL);
+	gpio_request(GPIO_FN_KEYIN1,      NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
+	gpio_request(GPIO_FN_FSIOASD,    NULL);
+	gpio_request(GPIO_FN_FSIIABCK,   NULL);
+	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOABCK,   NULL);
+	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI A */
+	clk = clk_get(NULL, "fsia_clk");
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimcka_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimcka_clk);
+		clk_set_rate(clk, 48000);
+		clk_put(clk);
+	}
+
+	/* SDHI0 connected to cn7 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	/* SDHI1 connected to cn8 */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1WP, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
+	if (sw & SW41_B) {
+		/* 720p */
+		lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
+	} else {
+		/* VGA */
+		lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
+	}
+
+	if (sw & SW41_A) {
+		/* Digital monitor */
+		lcdc_info.ch[0].interface_type = RGB18;
+		lcdc_info.ch[0].flags          = 0;
+	} else {
+		/* Analog monitor */
+		lcdc_info.ch[0].interface_type = RGB24;
+		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;
+	}
+
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	return platform_add_devices(ms7724se_devices,
+				    ARRAY_SIZE(ms7724se_devices));
+}
+device_initcall(devices_setup);
+
+static struct sh_machine_vector mv_ms7724se __initmv = {
+	.mv_name	= "ms7724se",
+	.mv_init_irq	= init_se7724_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/7751/Makefile b/kernel/arch/sh/boards/mach-se/7751/Makefile
new file mode 100644
index 000000000..a338fd9d5
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7751/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the 7751 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/7751/irq.c b/kernel/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 000000000..5c9847ea1
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/kernel/arch/sh/boards/mach-se/7751/setup.c b/kernel/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 000000000..820f4e7ba
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,59 @@
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+device_initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_init_irq		= init_7751se_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/7780/Makefile b/kernel/arch/sh/boards/mach-se/7780/Makefile
new file mode 100644
index 000000000..6b88adae3
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7780/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-se/7780/irq.c b/kernel/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 000000000..d5c9edc17
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,68 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7780.h>
+
+#define INTC_BASE	0xffd00000
+#define INTC_ICR1	(INTC_BASE+0x1c)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	/* enable all interrupt at FPGA */
+	__raw_writew(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	__raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	__raw_writew(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	__raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	__raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	__raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+	/* ICR1: detect low level(for 2ndcut) */
+	__raw_writel(0xAAAA0000, INTC_ICR1);
+
+	/*
+	 * FPGA PCISEL register initialize
+	 *
+	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
+	 *  -------------------------------------
+	 *  INTA || INTA  | INTD  |  --   | INTB
+	 *  -------------------------------------
+	 *  INTB || INTB  | INTA  |  --   | INTC
+	 *  -------------------------------------
+	 *  INTC || INTC  | INTB  | INTA  |  --
+	 *  -------------------------------------
+	 *  INTD || INTD  | INTC  |  --   | INTA
+	 *  -------------------------------------
+	 */
+	__raw_writew(0x0013, FPGA_PCI_INTSEL1);
+	__raw_writew(0xE402, FPGA_PCI_INTSEL2);
+}
diff --git a/kernel/arch/sh/boards/mach-se/7780/setup.c b/kernel/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 000000000..ae5a1d84f
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,114 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	__raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	__raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	__raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	__raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	__raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	__raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	__raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	__raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	__raw_writew(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	__raw_writew(0x0000, GPIO_PECR);
+	__raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	__raw_writew(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	__raw_writew(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-se/Makefile b/kernel/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 000000000..b537e238c
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,10 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
+obj-$(CONFIG_SH_7724_SOLUTION_ENGINE)	+= 7724/
diff --git a/kernel/arch/sh/boards/mach-se/board-se7619.c b/kernel/arch/sh/boards/mach-se/board-se7619.c
new file mode 100644
index 000000000..958bcd7aa
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-se/board-se7619.c
@@ -0,0 +1,26 @@
+/*
+ * arch/sh/boards/se/7619/setup.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * Hitachi SH7619 SolutionEngine Support.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static int se7619_mode_pins(void)
+{
+	return MODE_PIN2 | MODE_PIN0;
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_mode_pins		= se7619_mode_pins,
+};
diff --git a/kernel/arch/sh/boards/mach-sh03/Makefile b/kernel/arch/sh/boards/mach-sh03/Makefile
new file mode 100644
index 000000000..400306a79
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sh03/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Interface (CTP/PCI-SH03) specific parts of the kernel
+#
+
+obj-y	 := setup.o rtc.o
diff --git a/kernel/arch/sh/boards/mach-sh03/rtc.c b/kernel/arch/sh/boards/mach-sh03/rtc.c
new file mode 100644
index 000000000..f83ac7995
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sh03/rtc.c
@@ -0,0 +1,132 @@
+/*
+ * linux/arch/sh/boards/sh03/rtc.c -- CTP/PCI-SH03 on-chip RTC support
+ *
+ *  Copyright (C) 2004  Saito.K & Jeanne(ksaito@interface.co.jp)
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/bcd.h>
+#include <linux/rtc.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+
+#define RTC_BASE	0xb0000000
+#define RTC_SEC1	(RTC_BASE + 0)
+#define RTC_SEC10	(RTC_BASE + 1)
+#define RTC_MIN1	(RTC_BASE + 2)
+#define RTC_MIN10	(RTC_BASE + 3)
+#define RTC_HOU1	(RTC_BASE + 4)
+#define RTC_HOU10	(RTC_BASE + 5)
+#define RTC_WEE1	(RTC_BASE + 6)
+#define RTC_DAY1	(RTC_BASE + 7)
+#define RTC_DAY10	(RTC_BASE + 8)
+#define RTC_MON1	(RTC_BASE + 9)
+#define RTC_MON10	(RTC_BASE + 10)
+#define RTC_YEA1	(RTC_BASE + 11)
+#define RTC_YEA10	(RTC_BASE + 12)
+#define RTC_YEA100	(RTC_BASE + 13)
+#define RTC_YEA1000	(RTC_BASE + 14)
+#define RTC_CTL		(RTC_BASE + 15)
+#define RTC_BUSY	1
+#define RTC_STOP	2
+
+static DEFINE_SPINLOCK(sh03_rtc_lock);
+
+unsigned long get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+
+	spin_lock(&sh03_rtc_lock);
+ again:
+	do {
+		sec  = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
+		min  = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+		hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
+		day  = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
+		mon  = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
+		year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
+		     + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
+		     + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
+	} while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
+	if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
+	    hour > 23 || min > 59 || sec > 59) {
+		printk(KERN_ERR
+		       "SH-03 RTC: invalid value, resetting to 1 Jan 2000\n");
+		printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
+		       year, mon, day, hour, min, sec);
+
+		__raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
+		__raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
+		__raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
+		__raw_writeb(6, RTC_WEE1);
+		__raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
+		__raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
+		__raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
+		__raw_writeb(0, RTC_YEA100);
+		__raw_writeb(2, RTC_YEA1000);
+		__raw_writeb(0, RTC_CTL);
+		goto again;
+	}
+
+	spin_unlock(&sh03_rtc_lock);
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+void sh03_rtc_gettimeofday(struct timespec *tv)
+{
+
+	tv->tv_sec = get_cmos_time();
+	tv->tv_nsec = 0;
+}
+
+static int set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	int i;
+
+	/* gets recalled with irq locally disabled */
+	spin_lock(&sh03_rtc_lock);
+	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
+		if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
+			break;
+	cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		__raw_writeb(real_seconds % 10, RTC_SEC1);
+		__raw_writeb(real_seconds / 10, RTC_SEC10);
+		__raw_writeb(real_minutes % 10, RTC_MIN1);
+		__raw_writeb(real_minutes / 10, RTC_MIN10);
+	} else {
+		printk_once(KERN_NOTICE
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+	spin_unlock(&sh03_rtc_lock);
+
+	return retval;
+}
+
+int sh03_rtc_settimeofday(const time_t secs)
+{
+	unsigned long nowtime = secs;
+
+	return set_rtc_mmss(nowtime);
+}
+
+void sh03_time_init(void)
+{
+	rtc_sh_get_time = sh03_rtc_gettimeofday;
+	rtc_sh_set_time = sh03_rtc_settimeofday;
+}
diff --git a/kernel/arch/sh/boards/mach-sh03/setup.c b/kernel/arch/sh/boards/mach-sh03/setup.c
new file mode 100644
index 000000000..f582dab59
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sh03/setup.c
@@ -0,0 +1,105 @@
+/*
+ * linux/arch/sh/boards/sh03/setup.c
+ *
+ * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
+#include <asm/addrspace.h>
+
+static void __init init_sh03_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+	board_time_init = sh03_time_init;
+}
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = 0x1f0,
+		.end    = 0x1f0 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = 0x1f0 + 0x206,
+		.end    = 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = IRL2_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = ioremap_prot(paddrbase, PAGE_SIZE, pgprot_val(prot));
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[0].end   += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].start += (unsigned long)cf_ide_base;
+	cf_ide_resources[1].end   += (unsigned long)cf_ide_base;
+
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+device_initcall(sh03_devices_setup);
+
+static struct sh_machine_vector mv_sh03 __initmv = {
+	.mv_name		= "Interface (CTP/PCI-SH03)",
+	.mv_setup		= sh03_setup,
+	.mv_init_irq		= init_sh03_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-sh7763rdp/Makefile b/kernel/arch/sh/boards/mach-sh7763rdp/Makefile
new file mode 100644
index 000000000..f6c0b5551
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/kernel/arch/sh/boards/mach-sh7763rdp/irq.c b/kernel/arch/sh/boards/mach-sh7763rdp/irq.c
new file mode 100644
index 000000000..add698c8f
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	__raw_writel(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	__raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	__raw_writel(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	__raw_writel(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	__raw_writel(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/kernel/arch/sh/boards/mach-sh7763rdp/setup.c b/kernel/arch/sh/boards/mach-sh7763rdp/setup.c
new file mode 100644
index 000000000..2c8fb0468
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -0,0 +1,217 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <mach/sh7763rdp.h>
+#include <asm/sh7760fb.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (0x920,0x940,0x960 -> 0x920)
+ */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 0xFEE01800,   /* TSU */
+		.end    = 0xFEE01FFF,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = evt2irq(0x920),   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+	.name       = "sh7763-gether",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+	{
+		.start  = 0xFFE80000,
+		.end    = 0xFFE80442 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+	.refresh = 60,
+	.name = "VGA Monitor",
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 10000,
+	.left_margin = 80,
+	.right_margin = 24,
+	.upper_margin = 30,
+	.lower_margin = 1,
+	.hsync_len = 96,
+	.vsync_len = 1,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+	.def_mode = &sh7763fb_videomode,
+	.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+	.lddfr = LDDFR_16BPP_RGB565,
+	.ldpmmr = 0x0000,
+	.ldpspr = 0xFFFF,
+	.ldaclnr = 0x0001,
+	.ldickr = 0x1102,
+	.rotate = 0,
+	.novsync = 0,
+	.blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+	.name		= "sh7760-lcdc",
+	.resource	= sh7763rdp_fb_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+	.dev = {
+		.platform_data = &sh7763fb_def_pdata,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+	&sh7763rdp_eth_device,
+	&sh7763rdp_fb_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+device_initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	__raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	__raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	__raw_writew(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	__raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	__raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	__raw_writew(0, PORT_PKCR);
+	__raw_writew(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	__raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	__raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	__raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	__raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	__raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	__raw_writew(0x0, PORT_PFCR);
+	__raw_writew(0x0, PORT_PFCR);
+	__raw_writew(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	__raw_writew(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	__raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
+	__raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
+	__raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/kernel/arch/sh/boards/mach-x3proto/Makefile b/kernel/arch/sh/boards/mach-x3proto/Makefile
new file mode 100644
index 000000000..0cbe3d02d
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-x3proto/Makefile
@@ -0,0 +1,3 @@
+obj-y += setup.o ilsel.o
+
+obj-$(CONFIG_GPIOLIB)		+= gpio.o
diff --git a/kernel/arch/sh/boards/mach-x3proto/gpio.c b/kernel/arch/sh/boards/mach-x3proto/gpio.c
new file mode 100644
index 000000000..f035a7ac6
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-x3proto/gpio.c
@@ -0,0 +1,139 @@
+/*
+ * arch/sh/boards/mach-x3proto/gpio.c
+ *
+ * Renesas SH-X3 Prototype Baseboard GPIO Support.
+ *
+ * Copyright (C) 2010 - 2012  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+
+#define KEYCTLR	0xb81c0000
+#define KEYOUTR	0xb81c0002
+#define KEYDETR 0xb81c0004
+
+static DEFINE_SPINLOCK(x3proto_gpio_lock);
+static struct irq_domain *x3proto_irq_domain;
+
+static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	unsigned long flags;
+	unsigned int data;
+
+	spin_lock_irqsave(&x3proto_gpio_lock, flags);
+	data = __raw_readw(KEYCTLR);
+	data |= (1 << gpio);
+	__raw_writew(data, KEYCTLR);
+	spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+
+	return 0;
+}
+
+static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(__raw_readw(KEYDETR) & (1 << gpio));
+}
+
+static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	int virq;
+
+	if (gpio < chip->ngpio)
+		virq = irq_create_mapping(x3proto_irq_domain, gpio);
+	else
+		virq = -ENXIO;
+
+	return virq;
+}
+
+static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int pin;
+
+	chip->irq_mask_ack(data);
+
+	mask = __raw_readw(KEYDETR);
+	for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
+		generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin));
+
+	chip->irq_unmask(data);
+}
+
+struct gpio_chip x3proto_gpio_chip = {
+	.label			= "x3proto-gpio",
+	.direction_input	= x3proto_gpio_direction_input,
+	.get			= x3proto_gpio_get,
+	.to_irq			= x3proto_gpio_to_irq,
+	.base			= -1,
+	.ngpio			= NR_BASEBOARD_GPIOS,
+};
+
+static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq,
+				      "gpio");
+
+	return 0;
+}
+
+static struct irq_domain_ops x3proto_gpio_irq_ops = {
+	.map	= x3proto_gpio_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+int __init x3proto_gpio_setup(void)
+{
+	int ilsel, ret;
+
+	ilsel = ilsel_enable(ILSEL_KEY);
+	if (unlikely(ilsel < 0))
+		return ilsel;
+
+	ret = gpiochip_add(&x3proto_gpio_chip);
+	if (unlikely(ret))
+		goto err_gpio;
+
+	x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+						   &x3proto_gpio_irq_ops, NULL);
+	if (unlikely(!x3proto_irq_domain))
+		goto err_irq;
+
+	pr_info("registering '%s' support, handling GPIOs %u -> %u, "
+		"bound to IRQ %u\n",
+		x3proto_gpio_chip.label, x3proto_gpio_chip.base,
+		x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
+		ilsel);
+
+	irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler);
+	irq_set_irq_wake(ilsel, 1);
+
+	return 0;
+
+err_irq:
+	gpiochip_remove(&x3proto_gpio_chip);
+	ret = 0;
+err_gpio:
+	synchronize_irq(ilsel);
+
+	ilsel_disable(ILSEL_KEY);
+
+	return ret;
+}
diff --git a/kernel/arch/sh/boards/mach-x3proto/ilsel.c b/kernel/arch/sh/boards/mach-x3proto/ilsel.c
new file mode 100644
index 000000000..95e346139
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-x3proto/ilsel.c
@@ -0,0 +1,159 @@
+/*
+ * arch/sh/boards/mach-x3proto/ilsel.c
+ *
+ * Helper routines for SH-X3 proto board ILSEL.
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/bitmap.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+
+/*
+ * ILSEL is split across:
+ *
+ *	ILSEL0 - 0xb8100004 [ Levels  1 -  4 ]
+ *	ILSEL1 - 0xb8100006 [ Levels  5 -  8 ]
+ *	ILSEL2 - 0xb8100008 [ Levels  9 - 12 ]
+ *	ILSEL3 - 0xb810000a [ Levels 13 - 15 ]
+ *
+ * With each level being relative to an ilsel_source_t.
+ */
+#define ILSEL_BASE	0xb8100004
+#define ILSEL_LEVELS	15
+
+/*
+ * ILSEL level map, in descending order from the highest level down.
+ *
+ * Supported levels are 1 - 15 spread across ILSEL0 - ILSEL4, mapping
+ * directly to IRLs. As the IRQs are numbered in reverse order relative
+ * to the interrupt level, the level map is carefully managed to ensure a
+ * 1:1 mapping between the bit position and the IRQ number.
+ *
+ * This careful constructions allows ilsel_enable*() to be referenced
+ * directly for hooking up an ILSEL set and getting back an IRQ which can
+ * subsequently be used for internal accounting in the (optional) disable
+ * path.
+ */
+static unsigned long ilsel_level_map;
+
+static inline unsigned int ilsel_offset(unsigned int bit)
+{
+	return ILSEL_LEVELS - bit - 1;
+}
+
+static inline unsigned long mk_ilsel_addr(unsigned int bit)
+{
+	return ILSEL_BASE + ((ilsel_offset(bit) >> 1) & ~0x1);
+}
+
+static inline unsigned int mk_ilsel_shift(unsigned int bit)
+{
+	return (ilsel_offset(bit) & 0x3) << 2;
+}
+
+static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
+{
+	unsigned int tmp, shift;
+	unsigned long addr;
+
+	pr_notice("enabling ILSEL set %d\n", set);
+
+	addr = mk_ilsel_addr(bit);
+	shift = mk_ilsel_shift(bit);
+
+	pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
+		 __func__, bit, addr, shift, set);
+
+	tmp = __raw_readw(addr);
+	tmp &= ~(0xf << shift);
+	tmp |= set << shift;
+	__raw_writew(tmp, addr);
+}
+
+/**
+ * ilsel_enable - Enable an ILSEL set.
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ *
+ * Enables a given non-aliased ILSEL source (<= ILSEL_KEY) at the highest
+ * available interrupt level. Callers should take care to order callsites
+ * noting descending interrupt levels. Aliasing FPGA and external board
+ * IRQs need to use ilsel_enable_fixed().
+ *
+ * The return value is an IRQ number that can later be taken down with
+ * ilsel_disable().
+ */
+int ilsel_enable(ilsel_source_t set)
+{
+	unsigned int bit;
+
+	if (unlikely(set > ILSEL_KEY)) {
+		pr_err("Aliased sources must use ilsel_enable_fixed()\n");
+		return -EINVAL;
+	}
+
+	do {
+		bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
+	} while (test_and_set_bit(bit, &ilsel_level_map));
+
+	__ilsel_enable(set, bit);
+
+	return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable);
+
+/**
+ * ilsel_enable_fixed - Enable an ILSEL set at a fixed interrupt level
+ * @set: ILSEL source (see ilsel_source_t enum in include/asm-sh/ilsel.h).
+ * @level: Interrupt level (1 - 15)
+ *
+ * Enables a given ILSEL source at a fixed interrupt level. Necessary
+ * both for level reservation as well as for aliased sources that only
+ * exist on special ILSEL#s.
+ *
+ * Returns an IRQ number (as ilsel_enable()).
+ */
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level)
+{
+	unsigned int bit = ilsel_offset(level - 1);
+
+	if (test_and_set_bit(bit, &ilsel_level_map))
+		return -EBUSY;
+
+	__ilsel_enable(set, bit);
+
+	return bit;
+}
+EXPORT_SYMBOL_GPL(ilsel_enable_fixed);
+
+/**
+ * ilsel_disable - Disable an ILSEL set
+ * @irq: Bit position for ILSEL set value (retval from enable routines)
+ *
+ * Disable a previously enabled ILSEL set.
+ */
+void ilsel_disable(unsigned int irq)
+{
+	unsigned long addr;
+	unsigned int tmp;
+
+	pr_notice("disabling ILSEL set %d\n", irq);
+
+	addr = mk_ilsel_addr(irq);
+
+	tmp = __raw_readw(addr);
+	tmp &= ~(0xf << mk_ilsel_shift(irq));
+	__raw_writew(tmp, addr);
+
+	clear_bit(irq, &ilsel_level_map);
+}
+EXPORT_SYMBOL_GPL(ilsel_disable);
diff --git a/kernel/arch/sh/boards/mach-x3proto/setup.c b/kernel/arch/sh/boards/mach-x3proto/setup.c
new file mode 100644
index 000000000..d682e2b6a
--- /dev/null
+++ b/kernel/arch/sh/boards/mach-x3proto/setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/mach-x3proto/setup.c
+ *
+ * Renesas SH-X3 Prototype Board Support.
+ *
+ * Copyright (C) 2007 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/usb/m66592.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+#include <asm/smp-ops.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xb8140020,
+		.end	= 0xb8140020,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start		= 0x18000300,
+		.end		= 0x18000300 + 0x10 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.resource	= smc91x_resources,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
+};
+
+static struct r8a66597_platdata r8a66597_data = {
+	.xtal = R8A66597_PLATDATA_XTAL_12MHZ,
+	.vif = 1,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.start	= 0x18040000,
+		.end	= 0x18080000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &r8a66597_data,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct m66592_platdata usbf_platdata = {
+	.xtal = M66592_PLATDATA_XTAL_24MHZ,
+	.vif = 1,
+};
+
+static struct resource m66592_usb_peripheral_resources[] = {
+	[0] = {
+		.name	= "m66592_udc",
+		.start	= 0x18080000,
+		.end	= 0x180c0000 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "m66592_udc",
+		/* Filled in by ilsel */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device m66592_usb_peripheral_device = {
+	.name		= "m66592_udc",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,		/* don't use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usbf_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(m66592_usb_peripheral_resources),
+	.resource	= m66592_usb_peripheral_resources,
+};
+
+static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
+	{
+		.desc		= "key44",
+		.code		= KEY_POWER,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key43",
+		.code		= KEY_SUSPEND,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key42",
+		.code		= KEY_KATAKANAHIRAGANA,
+		.active_low	= 1,
+	}, {
+		.desc		= "key41",
+		.code		= KEY_SWITCHVIDEOMODE,
+		.active_low	= 1,
+	}, {
+		.desc		= "key34",
+		.code		= KEY_F12,
+		.active_low	= 1,
+	}, {
+		.desc		= "key33",
+		.code		= KEY_F11,
+		.active_low	= 1,
+	}, {
+		.desc		= "key32",
+		.code		= KEY_F10,
+		.active_low	= 1,
+	}, {
+		.desc		= "key31",
+		.code		= KEY_F9,
+		.active_low	= 1,
+	}, {
+		.desc		= "key24",
+		.code		= KEY_F8,
+		.active_low	= 1,
+	}, {
+		.desc		= "key23",
+		.code		= KEY_F7,
+		.active_low	= 1,
+	}, {
+		.desc		= "key22",
+		.code		= KEY_F6,
+		.active_low	= 1,
+	}, {
+		.desc		= "key21",
+		.code		= KEY_F5,
+		.active_low	= 1,
+	}, {
+		.desc		= "key14",
+		.code		= KEY_F4,
+		.active_low	= 1,
+	}, {
+		.desc		= "key13",
+		.code		= KEY_F3,
+		.active_low	= 1,
+	}, {
+		.desc		= "key12",
+		.code		= KEY_F2,
+		.active_low	= 1,
+	}, {
+		.desc		= "key11",
+		.code		= KEY_F1,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data baseboard_buttons_data = {
+	.buttons	= baseboard_buttons,
+	.nbuttons	= ARRAY_SIZE(baseboard_buttons),
+};
+
+static struct platform_device baseboard_buttons_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &baseboard_buttons_data,
+	},
+};
+
+static struct platform_device *x3proto_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_device,
+	&r8a66597_usb_host_device,
+	&m66592_usb_peripheral_device,
+	&baseboard_buttons_device,
+};
+
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
+static int __init x3proto_devices_setup(void)
+{
+	int ret, i;
+
+	/*
+	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
+	 * pins at a later point to enable the GPIOs to settle.
+	 */
+	x3proto_init_irq();
+
+	/*
+	 * Now that ILSELs are available, set up the baseboard GPIOs.
+	 */
+	ret = x3proto_gpio_setup();
+	if (unlikely(ret))
+		return ret;
+
+	/*
+	 * Propagate dynamic GPIOs for the baseboard button device.
+	 */
+	for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
+		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
+
+	r8a66597_usb_host_resources[1].start =
+		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
+
+	m66592_usb_peripheral_resources[1].start =
+		m66592_usb_peripheral_resources[1].end = ilsel_enable(ILSEL_USBP_I);
+
+	smc91x_resources[1].start =
+		smc91x_resources[1].end = ilsel_enable(ILSEL_LAN);
+
+	return platform_add_devices(x3proto_devices,
+				    ARRAY_SIZE(x3proto_devices));
+}
+device_initcall(x3proto_devices_setup);
+
+static void __init x3proto_setup(char **cmdline_p)
+{
+	register_smp_ops(&shx3_smp_ops);
+}
+
+static struct sh_machine_vector mv_x3proto __initmv = {
+	.mv_name		= "x3proto",
+	.mv_setup		= x3proto_setup,
+};