Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 68 insertions, 0 deletions

diff --git a/kernel/arch/powerpc/include/asm/pte-8xx.h b/kernel/arch/powerpc/include/asm/pte-8xx.h
new file mode 100644
index 000000000..97bae64af
--- /dev/null
+++ b/kernel/arch/powerpc/include/asm/pte-8xx.h
@@ -0,0 +1,68 @@
+#ifndef _ASM_POWERPC_PTE_8xx_H
+#define _ASM_POWERPC_PTE_8xx_H
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access.  The TLB does not have accessed nor write
+ * protect.  We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect.  We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators.  Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded.  We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added.  We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC.  The 8M pages are only used for kernel
+ * mapping of well known areas.  The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT	0x0001	/* Page is valid */
+#define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
+#define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+#define _PAGE_SPECIAL	0x0008	/* SW entry, forced to 0 by the TLB miss */
+#define _PAGE_DIRTY	0x0100	/* C: page changed */
+
+/* These 4 software bits must be masked out when the entry is loaded
+ * into the TLB, 1 SW bit left(0x0080).
+ */
+#define _PAGE_GUARDED	0x0010	/* software: guarded access */
+#define _PAGE_ACCESSED	0x0020	/* software: page referenced */
+#define _PAGE_WRITETHRU	0x0040	/* software: caching is write through */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change.  It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_RO	0x0400	/* lsb PP bits */
+#define _PAGE_USER	0x0800	/* msb PP bits */
+/* set when _PAGE_USER is unset and _PAGE_RO is set */
+#define _PAGE_KNLRO	0x0200
+
+#define _PMD_PRESENT	0x0001
+#define _PMD_BAD	0x0ff0
+#define _PMD_PAGE_MASK	0x000c
+#define _PMD_PAGE_8M	0x000c
+
+#define _PTE_NONE_MASK _PAGE_KNLRO
+
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+/* We need to add _PAGE_SHARED to kernel pages */
+#define _PAGE_KERNEL_RO	(_PAGE_SHARED | _PAGE_RO | _PAGE_KNLRO)
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC | _PAGE_RO | _PAGE_KNLRO)
+
+#endif /* __KERNEL__ */
+#endif /*  _ASM_POWERPC_PTE_8xx_H */