diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/arch/powerpc/include/asm/dcr-regs.h | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/arch/powerpc/include/asm/dcr-regs.h')
-rw-r--r-- | kernel/arch/powerpc/include/asm/dcr-regs.h | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/kernel/arch/powerpc/include/asm/dcr-regs.h b/kernel/arch/powerpc/include/asm/dcr-regs.h new file mode 100644 index 000000000..380274de4 --- /dev/null +++ b/kernel/arch/powerpc/include/asm/dcr-regs.h @@ -0,0 +1,183 @@ +/* + * Common DCR / SDR / CPR register definitions used on various IBM/AMCC + * 4xx processors + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp + * <benh@kernel.crashing.org> + * + * Mostly lifted from asm-ppc/ibm4xx.h by + * + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * + */ + +#ifndef __DCR_REGS_H__ +#define __DCR_REGS_H__ + +/* + * Most DCRs used for controlling devices such as the MAL, DMA engine, + * etc... are obtained for the device tree. + * + * The definitions in this files are fixed DCRs and indirect DCRs that + * are commonly used outside of specific drivers or refer to core + * common registers that may occasionally have to be tweaked outside + * of the driver main register set + */ + +/* CPRs (440GX and 440SP/440SPe) */ +#define DCRN_CPR0_CONFIG_ADDR 0xc +#define DCRN_CPR0_CONFIG_DATA 0xd + +/* SDRs (440GX and 440SP/440SPe) */ +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_EPS 0x1c00000 +#define SDR0_PFC1_EPS_SHIFT 22 +#define SDR0_PFC1_RMII 0x02000000 +#define SDR0_MFR 0x4300 +#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ +#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ +#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ +#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ +#define SDR0_MFR_T0TXFL 0x00080000 +#define SDR0_MFR_T0TXFH 0x00040000 +#define SDR0_MFR_T1TXFL 0x00020000 +#define SDR0_MFR_T1TXFH 0x00010000 +#define SDR0_MFR_E0TXFL 0x00008000 +#define SDR0_MFR_E0TXFH 0x00004000 +#define SDR0_MFR_E0RXFL 0x00002000 +#define SDR0_MFR_E0RXFH 0x00001000 +#define SDR0_MFR_E1TXFL 0x00000800 +#define SDR0_MFR_E1TXFH 0x00000400 +#define SDR0_MFR_E1RXFL 0x00000200 +#define SDR0_MFR_E1RXFH 0x00000100 +#define SDR0_MFR_E2TXFL 0x00000080 +#define SDR0_MFR_E2TXFH 0x00000040 +#define SDR0_MFR_E2RXFL 0x00000020 +#define SDR0_MFR_E2RXFH 0x00000010 +#define SDR0_MFR_E3TXFL 0x00000008 +#define SDR0_MFR_E3TXFH 0x00000004 +#define SDR0_MFR_E3RXFL 0x00000002 +#define SDR0_MFR_E3RXFH 0x00000001 +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UART3 0x0123 +#define SDR0_CUST0 0x4000 + +/* SDR for 405EZ */ +#define DCRN_SDR_ICINTSTAT 0x4510 +#define ICINTSTAT_ICRX 0x80000000 +#define ICINTSTAT_ICTX0 0x40000000 +#define ICINTSTAT_ICTX1 0x20000000 +#define ICINTSTAT_ICTX 0x60000000 + +/* SDRs (460EX/460GT) */ +#define SDR0_ETH_CFG 0x4103 +#define SDR0_ETH_CFG_ECS 0x00000100 /* EMAC int clk source */ + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_SRAM0_SB0CR 0x00 +#define DCRN_SRAM0_SB1CR 0x01 +#define DCRN_SRAM0_SB2CR 0x02 +#define DCRN_SRAM0_SB3CR 0x03 +#define SRAM_SBCR_BU_MASK 0x00000180 +#define SRAM_SBCR_BS_64KB 0x00000800 +#define SRAM_SBCR_BU_RO 0x00000080 +#define SRAM_SBCR_BU_RW 0x00000180 +#define DCRN_SRAM0_BEAR 0x04 +#define DCRN_SRAM0_BESR0 0x05 +#define DCRN_SRAM0_BESR1 0x06 +#define DCRN_SRAM0_PMEG 0x07 +#define DCRN_SRAM0_CID 0x08 +#define DCRN_SRAM0_REVID 0x09 +#define DCRN_SRAM0_DPC 0x0a +#define SRAM_DPC_ENABLE 0x80000000 + +/* + * All those DCR register addresses are offsets from the base address + * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is + * excluded here and configured in the device tree. + */ +#define DCRN_L2C0_CFG 0x00 +#define L2C_CFG_L2M 0x80000000 +#define L2C_CFG_ICU 0x40000000 +#define L2C_CFG_DCU 0x20000000 +#define L2C_CFG_DCW_MASK 0x1e000000 +#define L2C_CFG_TPC 0x01000000 +#define L2C_CFG_CPC 0x00800000 +#define L2C_CFG_FRAN 0x00200000 +#define L2C_CFG_SS_MASK 0x00180000 +#define L2C_CFG_SS_256 0x00000000 +#define L2C_CFG_CPIM 0x00040000 +#define L2C_CFG_TPIM 0x00020000 +#define L2C_CFG_LIM 0x00010000 +#define L2C_CFG_PMUX_MASK 0x00007000 +#define L2C_CFG_PMUX_SNP 0x00000000 +#define L2C_CFG_PMUX_IF 0x00001000 +#define L2C_CFG_PMUX_DF 0x00002000 +#define L2C_CFG_PMUX_DS 0x00003000 +#define L2C_CFG_PMIM 0x00000800 +#define L2C_CFG_TPEI 0x00000400 +#define L2C_CFG_CPEI 0x00000200 +#define L2C_CFG_NAM 0x00000100 +#define L2C_CFG_SMCM 0x00000080 +#define L2C_CFG_NBRM 0x00000040 +#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */ +#define DCRN_L2C0_CMD 0x01 +#define L2C_CMD_CLR 0x80000000 +#define L2C_CMD_DIAG 0x40000000 +#define L2C_CMD_INV 0x20000000 +#define L2C_CMD_CCP 0x10000000 +#define L2C_CMD_CTE 0x08000000 +#define L2C_CMD_STRC 0x04000000 +#define L2C_CMD_STPC 0x02000000 +#define L2C_CMD_RPMC 0x01000000 +#define L2C_CMD_HCC 0x00800000 +#define DCRN_L2C0_ADDR 0x02 +#define DCRN_L2C0_DATA 0x03 +#define DCRN_L2C0_SR 0x04 +#define L2C_SR_CC 0x80000000 +#define L2C_SR_CPE 0x40000000 +#define L2C_SR_TPE 0x20000000 +#define L2C_SR_LRU 0x10000000 +#define L2C_SR_PCS 0x08000000 +#define DCRN_L2C0_REVID 0x05 +#define DCRN_L2C0_SNP0 0x06 +#define DCRN_L2C0_SNP1 0x07 +#define L2C_SNP_BA_MASK 0xffff0000 +#define L2C_SNP_SSR_MASK 0x0000f000 +#define L2C_SNP_SSR_32G 0x0000f000 +#define L2C_SNP_ESR 0x00000800 + +/* + * DCR register offsets for 440SP/440SPe I2O/DMA controller. + * The base address is configured in the device tree. + */ +#define DCRN_I2O0_IBAL 0x006 +#define DCRN_I2O0_IBAH 0x007 +#define I2O_REG_ENABLE 0x00000001 /* Enable I2O/DMA access */ + +/* 440SP/440SPe Software Reset DCR */ +#define DCRN_SDR0_SRST 0x0200 +#define DCRN_SDR0_SRST_I2ODMA (0x80000000 >> 15) /* Reset I2O/DMA */ + +/* 440SP/440SPe Memory Queue DCR offsets */ +#define DCRN_MQ0_XORBA 0x04 +#define DCRN_MQ0_CF2H 0x06 +#define DCRN_MQ0_CFBHL 0x0f +#define DCRN_MQ0_BAUH 0x10 + +/* HB/LL Paths Configuration Register */ +#define MQ0_CFBHL_TPLM 28 +#define MQ0_CFBHL_HBCL 23 +#define MQ0_CFBHL_POLY 15 + +#endif /* __DCR_REGS_H__ */ |