These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 327 deletions

diff --git a/kernel/arch/powerpc/boot/dts/p2020ds.dtsi b/kernel/arch/powerpc/boot/dts/p2020ds.dtsi
deleted file mode 100644
index e699cf95b..000000000
--- a/kernel/arch/powerpc/boot/dts/p2020ds.dtsi
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * P2020DS Device Tree Source stub (no addresses or top-level ranges)
- *
- * Copyright 2011-2012 Freescale Semiconductor Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-&board_lbc {
-	nor@0,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "cfi-flash";
-		reg = <0x0 0x0 0x8000000>;
-		bank-width = <2>;
-		device-width = <1>;
-
-		ramdisk@0 {
-			reg = <0x0 0x03000000>;
-			read-only;
-		};
-
-		diagnostic@3000000 {
-			reg = <0x03000000 0x00e00000>;
-			read-only;
-		};
-
-		dink@3e00000 {
-			reg = <0x03e00000 0x00200000>;
-			read-only;
-		};
-
-		kernel@4000000 {
-			reg = <0x04000000 0x00400000>;
-			read-only;
-		};
-
-		jffs2@4400000 {
-			reg = <0x04400000 0x03b00000>;
-		};
-
-		dtb@7f00000 {
-			reg = <0x07f00000 0x00080000>;
-			read-only;
-		};
-
-		u-boot@7f80000 {
-			reg = <0x07f80000 0x00080000>;
-			read-only;
-		};
-	};
-
-	nand@2,0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x2 0x0 0x40000>;
-
-		u-boot@0 {
-			reg = <0x0 0x02000000>;
-			read-only;
-		};
-
-		jffs2@2000000 {
-			reg = <0x02000000 0x10000000>;
-		};
-
-		ramdisk@12000000 {
-			reg = <0x12000000 0x08000000>;
-			read-only;
-		};
-
-		kernel@1a000000 {
-			reg = <0x1a000000 0x04000000>;
-		};
-
-		dtb@1e000000 {
-			reg = <0x1e000000 0x01000000>;
-			read-only;
-		};
-
-		empty@1f000000 {
-			reg = <0x1f000000 0x21000000>;
-		};
-	};
-
-	board-control@3,0 {
-		compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
-		reg = <0x3 0x0 0x30>;
-	};
-
-	nand@4,0 {
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x4 0x0 0x40000>;
-	};
-
-	nand@5,0 {
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x5 0x0 0x40000>;
-	};
-
-	nand@6,0 {
-		compatible = "fsl,elbc-fcm-nand";
-		reg = <0x6 0x0 0x40000>;
-	};
-};
-
-&board_soc {
-	usb@22000 {
-		phy_type = "ulpi";
-		dr_mode = "host";
-	};
-
-	mdio@24520 {
-		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
-			reg = <0x0>;
-		};
-		phy1: ethernet-phy@1 {
-			interrupts = <3 1 0 0>;
-			reg = <0x1>;
-		};
-		phy2: ethernet-phy@2 {
-			interrupts = <3 1 0 0>;
-			reg = <0x2>;
-		};
-
-		sgmii_phy1: sgmii-phy@1 {
-			interrupts = <5 1 0 0>;
-			reg = <0x1c>;
-		};
-		sgmii_phy2: sgmii-phy@2 {
-			interrupts = <5 1 0 0>;
-			reg = <0x1d>;
-		};
-
-		tbi0: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-
-	};
-
-	mdio@25520 {
-		tbi1: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-	};
-
-	mdio@26520 {
-		tbi2: tbi-phy@11 {
-			reg = <0x11>;
-			device_type = "tbi-phy";
-		};
-
-	};
-
-	ptp_clock@24e00 {
-		fsl,tclk-period = <5>;
-		fsl,tmr-prsc = <200>;
-		fsl,tmr-add = <0xCCCCCCCD>;
-		fsl,tmr-fiper1 = <0x3B9AC9FB>;
-		fsl,tmr-fiper2 = <0x0001869B>;
-		fsl,max-adj = <249999999>;
-	};
-
-	enet0: ethernet@24000 {
-		tbi-handle = <&tbi0>;
-		phy-handle = <&phy0>;
-		phy-connection-type = "rgmii-id";
-	};
-
-	enet1: ethernet@25000 {
-		tbi-handle = <&tbi1>;
-		phy-handle = <&phy1>;
-		phy-connection-type = "rgmii-id";
-
-	};
-
-	enet2: ethernet@26000 {
-		tbi-handle = <&tbi2>;
-		phy-handle = <&phy2>;
-		phy-connection-type = "rgmii-id";
-	};
-};
-
-&board_pci1 {
-	pcie@0 {
-		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			// IDSEL 0x11 func 0 - PCI slot 1
-			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 1 - PCI slot 1
-			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 2 - PCI slot 1
-			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 3 - PCI slot 1
-			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 4 - PCI slot 1
-			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 5 - PCI slot 1
-			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 6 - PCI slot 1
-			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x11 func 7 - PCI slot 1
-			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
-			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
-
-			// IDSEL 0x1d  Audio
-			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
-			// IDSEL 0x1e Legacy
-			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
-			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
-			// IDSEL 0x1f IDE/SATA
-			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
-			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-			>;
-
-		uli1575@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x10000>;
-			isa@1e {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0xf000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0
-					  0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <4 1 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				i8042@60 {
-					#size-cells = <0>;
-					#address-cells = <1>;
-					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
-					interrupts = <1 3 12 3>;
-					interrupt-parent =
-						<&i8259>;
-
-					keyboard@0 {
-						reg = <0x0>;
-						compatible = "pnpPNP,303";
-					};
-
-					mouse@1 {
-						reg = <0x1>;
-						compatible = "pnpPNP,f03";
-					};
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-
-				gpio@400 {
-					reg = <0x1 0x400 0x80>;
-				};
-			};
-		};
-	};
-};