Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

4 files changed, 346 insertions, 0 deletions

diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/clock.h b/kernel/arch/mn10300/unit-asb2305/include/unit/clock.h
new file mode 100644
index 000000000..29e342543
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -0,0 +1,24 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_IOCLK		33333333UL
+/* #define MN10300_IOBCLK	66666666UL */
+
+#endif /* !__ASSEMBLY__ */
+
+#define MN10300_WDCLK		MN10300_IOCLK
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/leds.h b/kernel/arch/mn10300/unit-asb2305/include/unit/leds.h
new file mode 100644
index 000000000..bc471f617
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2305/include/unit/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS	__SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()		\
+do {						\
+	P0OUT &= 0xbf;				\
+	P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;	\
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds			\
+	mov	0x43077f1d,d0		;	\
+	mov	d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)				\
+do {								\
+	ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;	\
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/serial.h b/kernel/arch/mn10300/unit-asb2305/include/unit/serial.h
new file mode 100644
index 000000000..88c082193
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -0,0 +1,125 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS	0xA6FB0000
+#define ASB2305_DEBUG_MCR	__SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ	XIRQ0	/* Dual serial (PC16552)	(Hi) */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD	(18432000 / 16)
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS						\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT0_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE)				\
+do {							\
+	while (!(TTYS0_LSR & UART_LSR_##STATE)) {}	\
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)				\
+do {							\
+	while (!(TTYS0_MSR & UART_MSR_##LINE)) {}	\
+} while (0)
+#define FLOWCTL_CLEAR(LINE)			\
+do {						\
+	TTYS0_MCR &= ~UART_MCR_##LINE;		\
+} while (0)
+#define FLOWCTL_SET(LINE)			\
+do {						\
+	TTYS0_MCR |= UART_MCR_##LINE;		\
+} while (0)
+#define FLOWCTL_QUERY(LINE)	({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+	char ch;
+
+	FLOWCTL_SET(DTR);
+
+	for (; n > 0; n--) {
+		LSR_WAIT_FOR(THRE);
+		FLOWCTL_WAIT_FOR(CTS);
+
+		ch = *p++;
+		if (ch == 0x0a) {
+			TTYS0_TX = 0x0d;
+			LSR_WAIT_FOR(THRE);
+			FLOWCTL_WAIT_FOR(CTS);
+		}
+		TTYS0_TX = ch;
+	}
+
+	FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/kernel/arch/mn10300/unit-asb2305/include/unit/timex.h b/kernel/arch/mn10300/unit-asb2305/include/unit/timex.h
new file mode 100644
index 000000000..4cefc224f
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -0,0 +1,146 @@
+/* ASB2305-specific timer specifications
+ *
+ * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#include <asm/timer-regs.h>
+#include <unit/clock.h>
+#include <asm/param.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define	TMJCBR_MAX		0xffff
+#define	TMJCIRQ			TM1IRQ
+#define	TMJCICR			TM1ICR
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_SRC_IOCLK	MN10300_IOCLK
+
+#ifndef HZ
+# error HZ undeclared.
+#endif /* !HZ */
+/* use as little prescaling as possible to avoid losing accuracy */
+#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		1
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK
+#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		8
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK_8
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK_8
+#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		32
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK_32
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK_32
+#else
+# error You lose.
+#endif
+
+#define MN10300_JCCLK		(MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+#define MN10300_TSCCLK		(MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+
+#define MN10300_JC_PER_HZ	((MN10300_JCCLK + HZ / 2) / HZ)
+#define MN10300_TSC_PER_HZ	((MN10300_TSCCLK + HZ / 2) / HZ)
+
+static inline void stop_jiffies_counter(void)
+{
+	u16 tmp;
+	TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8;
+	tmp = TM01MD;
+}
+
+static inline void reload_jiffies_counter(u32 cnt)
+{
+	u32 tmp;
+
+	TM01BR = cnt;
+	tmp = TM01BR;
+
+	TM01MD = JC_TIMER_CLKSRC |		\
+		 TM1MD_SRC_TM0CASCADE << 8 |	\
+		 TM0MD_INIT_COUNTER |		\
+		 TM1MD_INIT_COUNTER << 8;
+
+
+	TM01MD = JC_TIMER_CLKSRC |		\
+		 TM1MD_SRC_TM0CASCADE << 8 |	\
+		 TM0MD_COUNT_ENABLE |		\
+		 TM1MD_COUNT_ENABLE << 8;
+
+	tmp = TM01MD;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define	TMTSCBR_MAX		0xffffffff
+#define	TMTSCBC			TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+	u32 t32;
+
+	/* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+	 * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+	 */
+	TM45BR = TMTSCBR_MAX;
+	t32 = TM45BR;
+
+	TM4MD = TSC_TIMER_CLKSRC;
+	TM4MD |= TM4MD_INIT_COUNTER;
+	TM4MD &= ~TM4MD_INIT_COUNTER;
+	TM4ICR = 0;
+	t32 = TM4ICR;
+
+	TM5MD = TM5MD_SRC_TM4CASCADE;
+	TM5MD |= TM5MD_INIT_COUNTER;
+	TM5MD &= ~TM5MD_INIT_COUNTER;
+	TM5ICR = 0;
+	t32 = TM5ICR;
+
+	TM5MD |= TM5MD_COUNT_ENABLE;
+	TM4MD |= TM4MD_COUNT_ENABLE;
+	t32 = TM5MD;
+	t32 = TM4MD;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+	u8 t8;
+	TM4MD = 0;
+	TM5MD = 0;
+	t8 = TM4MD;
+	t8 = TM5MD;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+	return (cycles_t)~TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */