Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

10 files changed, 683 insertions, 0 deletions

diff --git a/kernel/arch/mn10300/unit-asb2303/Makefile b/kernel/arch/mn10300/unit-asb2303/Makefile
new file mode 100644
index 000000000..38a5bb43b
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/Makefile
@@ -0,0 +1,6 @@
+###############################################################################
+#
+# Makefile for the ASB2303 board
+#
+###############################################################################
+obj-y   := unit-init.o smc91111.o flash.o leds.o
diff --git a/kernel/arch/mn10300/unit-asb2303/flash.c b/kernel/arch/mn10300/unit-asb2303/flash.c
new file mode 100644
index 000000000..17fe083fc
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/flash.c
@@ -0,0 +1,100 @@
+/* Handle mapping of the flash on the ASB2303 board
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define ASB2303_PROM_ADDR	0xA0000000	/* Boot PROM */
+#define ASB2303_PROM_SIZE	(2 * 1024 * 1024)
+#define ASB2303_FLASH_ADDR	0xA4000000	/* System Flash */
+#define ASB2303_FLASH_SIZE	(32 * 1024 * 1024)
+#define ASB2303_CONFIG_ADDR	0xA6000000	/* System Config EEPROM */
+#define ASB2303_CONFIG_SIZE	(8 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition asb2303_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_CAP_ROM /* force read-only */
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00400000,
+		.offset		= 0x00040000,
+	}, {
+		.name		= "Filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00440000
+	}
+};
+
+/*
+ * the ASB2303 Boot PROM definition
+ */
+static struct physmap_flash_data asb2303_bootprom_data = {
+	.width		= 2,
+	.nr_parts	= 1,
+	.parts		= asb2303_partitions,
+};
+
+static struct resource asb2303_bootprom_resource = {
+	.start		= ASB2303_PROM_ADDR,
+	.end		= ASB2303_PROM_ADDR + ASB2303_PROM_SIZE,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device asb2303_bootprom = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev.platform_data = &asb2303_bootprom_data,
+	.num_resources	= 1,
+	.resource	= &asb2303_bootprom_resource,
+};
+
+/*
+ * the ASB2303 System Flash definition
+ */
+static struct physmap_flash_data asb2303_sysflash_data = {
+	.width		= 4,
+	.nr_parts	= 1,
+	.parts		= asb2303_partitions,
+};
+
+static struct resource asb2303_sysflash_resource = {
+	.start		= ASB2303_FLASH_ADDR,
+	.end		= ASB2303_FLASH_ADDR + ASB2303_FLASH_SIZE,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device asb2303_sysflash = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.dev.platform_data = &asb2303_sysflash_data,
+	.num_resources	= 1,
+	.resource	= &asb2303_sysflash_resource,
+};
+
+/*
+ * register the ASB2303 flashes
+ */
+static int __init asb2303_mtd_init(void)
+{
+	platform_device_register(&asb2303_bootprom);
+	platform_device_register(&asb2303_sysflash);
+	return 0;
+}
+
+module_init(asb2303_mtd_init);
diff --git a/kernel/arch/mn10300/unit-asb2303/include/unit/clock.h b/kernel/arch/mn10300/unit-asb2303/include/unit/clock.h
new file mode 100644
index 000000000..0316907a0
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/include/unit/clock.h
@@ -0,0 +1,24 @@
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_IOCLK		33333333UL
+/* #define MN10300_IOBCLK	66666666UL */
+
+#endif /* !__ASSEMBLY__ */
+
+#define MN10300_WDCLK		MN10300_IOCLK
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/kernel/arch/mn10300/unit-asb2303/include/unit/leds.h b/kernel/arch/mn10300/unit-asb2303/include/unit/leds.h
new file mode 100644
index 000000000..3a7543ea7
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/include/unit/leds.h
@@ -0,0 +1,43 @@
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF	__SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS	__SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF)			\
+do {							\
+	ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f;	\
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds			\
+	mov	0x43,d0			;	\
+	movbu	d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/kernel/arch/mn10300/unit-asb2303/include/unit/serial.h b/kernel/arch/mn10300/unit-asb2303/include/unit/serial.h
new file mode 100644
index 000000000..991e356ba
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/include/unit/serial.h
@@ -0,0 +1,141 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS	0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS	0xA6FC0000
+
+#define SERIAL_IRQ	XIRQ0	/* Dual serial (PC16552)	(Hi) */
+
+/*
+ * The ASB2303 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD	(18432000 / 16)
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS						\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT0_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},								\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT1_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE)					\
+do {								\
+	while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}	\
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)					\
+do {								\
+	while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}	\
+} while (0)
+#define FLOWCTL_CLEAR(LINE)			\
+do {						\
+	GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE;	\
+} while (0)
+#define FLOWCTL_SET(LINE)			\
+do {						\
+	GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;	\
+} while (0)
+#define FLOWCTL_QUERY(LINE)	({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+	char ch;
+
+	FLOWCTL_SET(DTR);
+
+	for (; n > 0; n--) {
+		LSR_WAIT_FOR(THRE);
+		FLOWCTL_WAIT_FOR(CTS);
+
+		ch = *p++;
+		if (ch == 0x0a) {
+			GDBPORT_SERIAL_TX = 0x0d;
+			LSR_WAIT_FOR(THRE);
+			FLOWCTL_WAIT_FOR(CTS);
+		}
+		GDBPORT_SERIAL_TX = ch;
+	}
+
+	FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/kernel/arch/mn10300/unit-asb2303/include/unit/smc91111.h b/kernel/arch/mn10300/unit-asb2303/include/unit/smc91111.h
new file mode 100644
index 000000000..dd456e9c5
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/include/unit/smc91111.h
@@ -0,0 +1,50 @@
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE		0xAA000300UL
+#define SMC91111_BASE_END	0xAA000400UL
+#define SMC91111_IRQ		XIRQ3
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+#define SMC_IRQ_FLAGS		(0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r)		inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r)	outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r)		inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r)	outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l)	insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l)	outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r)		inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r)	outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l)	insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l)	outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT		RPC_LED_100_10
+#define RPC_LSB_DEFAULT		RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /*  _ASM_UNIT_SMC91111_H */
diff --git a/kernel/arch/mn10300/unit-asb2303/include/unit/timex.h b/kernel/arch/mn10300/unit-asb2303/include/unit/timex.h
new file mode 100644
index 000000000..c37f9832c
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/include/unit/timex.h
@@ -0,0 +1,146 @@
+/* ASB2303-specific timer specifications
+ *
+ * Copyright (C) 2007, 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#include <asm/timer-regs.h>
+#include <unit/clock.h>
+#include <asm/param.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define	TMJCBR_MAX		0xffff
+#define	TMJCIRQ			TM1IRQ
+#define	TMJCICR			TM1ICR
+
+#ifndef __ASSEMBLY__
+
+#define MN10300_SRC_IOCLK	MN10300_IOCLK
+
+#ifndef HZ
+# error HZ undeclared.
+#endif /* !HZ */
+/* use as little prescaling as possible to avoid losing accuracy */
+#if (MN10300_SRC_IOCLK + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		1
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK
+#elif (MN10300_SRC_IOCLK / 8 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		8
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK_8
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK_8
+#elif (MN10300_SRC_IOCLK / 32 + HZ / 2) / HZ - 1 <= TMJCBR_MAX
+# define IOCLK_PRESCALE		32
+# define JC_TIMER_CLKSRC	TM0MD_SRC_IOCLK_32
+# define TSC_TIMER_CLKSRC	TM4MD_SRC_IOCLK_32
+#else
+# error You lose.
+#endif
+
+#define MN10300_JCCLK		(MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+#define MN10300_TSCCLK		(MN10300_SRC_IOCLK / IOCLK_PRESCALE)
+
+#define MN10300_JC_PER_HZ	((MN10300_JCCLK + HZ / 2) / HZ)
+#define MN10300_TSC_PER_HZ	((MN10300_TSCCLK + HZ / 2) / HZ)
+
+static inline void stop_jiffies_counter(void)
+{
+	u16 tmp;
+	TM01MD = JC_TIMER_CLKSRC | TM1MD_SRC_TM0CASCADE << 8;
+	tmp = TM01MD;
+}
+
+static inline void reload_jiffies_counter(u32 cnt)
+{
+	u32 tmp;
+
+	TM01BR = cnt;
+	tmp = TM01BR;
+
+	TM01MD = JC_TIMER_CLKSRC |		\
+		 TM1MD_SRC_TM0CASCADE << 8 |	\
+		 TM0MD_INIT_COUNTER |		\
+		 TM1MD_INIT_COUNTER << 8;
+
+
+	TM01MD = JC_TIMER_CLKSRC |		\
+		 TM1MD_SRC_TM0CASCADE << 8 |	\
+		 TM0MD_COUNT_ENABLE |		\
+		 TM1MD_COUNT_ENABLE << 8;
+
+	tmp = TM01MD;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define	TMTSCBR_MAX		0xffffffff
+#define	TMTSCBC			TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+	u32 t32;
+
+	/* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+	 * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+	 */
+	TM45BR = TMTSCBR_MAX;
+	t32 = TM45BR;
+
+	TM4MD = TSC_TIMER_CLKSRC;
+	TM4MD |= TM4MD_INIT_COUNTER;
+	TM4MD &= ~TM4MD_INIT_COUNTER;
+	TM4ICR = 0;
+	t32 = TM4ICR;
+
+	TM5MD = TM5MD_SRC_TM4CASCADE;
+	TM5MD |= TM5MD_INIT_COUNTER;
+	TM5MD &= ~TM5MD_INIT_COUNTER;
+	TM5ICR = 0;
+	t32 = TM5ICR;
+
+	TM5MD |= TM5MD_COUNT_ENABLE;
+	TM4MD |= TM4MD_COUNT_ENABLE;
+	t32 = TM5MD;
+	t32 = TM4MD;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+	u8 t8;
+	TM4MD = 0;
+	TM5MD = 0;
+	t8 = TM4MD;
+	t8 = TM5MD;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+	return (cycles_t)~TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/kernel/arch/mn10300/unit-asb2303/leds.c b/kernel/arch/mn10300/unit-asb2303/leds.c
new file mode 100644
index 000000000..c03839357
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/leds.c
@@ -0,0 +1,52 @@
+/* ASB2303 peripheral 7-segment LEDs x1 support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <asm/rtc-regs.h>
+#include <unit/leds.h>
+
+#if 0
+static const u8 asb2303_led_hex_tbl[16] = {
+	0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
+	0x00, 0x20, 0x10, 0x06, 0x8c, 0x42, 0x0c, 0x1c
+};
+#endif
+
+static const u8 asb2303_led_chase_tbl[6] = {
+	~0x02,	/* top		- segA */
+	~0x04,	/* right top	- segB */
+	~0x08,	/* right bottom	- segC */
+	~0x10,	/* bottom	- segD */
+	~0x20,	/* left bottom	- segE */
+	~0x40,	/* left top	- segF */
+};
+
+static unsigned asb2303_led_chase;
+
+void peripheral_leds_display_exception(enum exception_code code)
+{
+	ASB2303_GPIO0DEF = 0x5555;	/* configure as an output port */
+	ASB2303_7SEGLEDS = 0x6d;	/* triple horizontal bar */
+}
+
+void peripheral_leds_led_chase(void)
+{
+	ASB2303_GPIO0DEF = 0x5555;	/* configure as an output port */
+	ASB2303_7SEGLEDS = asb2303_led_chase_tbl[asb2303_led_chase];
+	asb2303_led_chase++;
+	if (asb2303_led_chase >= 6)
+		asb2303_led_chase = 0;
+}
diff --git a/kernel/arch/mn10300/unit-asb2303/smc91111.c b/kernel/arch/mn10300/unit-asb2303/smc91111.c
new file mode 100644
index 000000000..53677694b
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/smc91111.c
@@ -0,0 +1,53 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/timex.h>
+#include <asm/processor.h>
+#include <asm/intctl-regs.h>
+#include <unit/smc91111.h>
+
+static struct resource smc91c111_resources[] = {
+	[0] = {
+		.start		= SMC91111_BASE,
+		.end		= SMC91111_BASE_END,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= SMC91111_IRQ,
+		.end		= SMC91111_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91c111_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91c111_resources),
+	.resource	= smc91c111_resources,
+};
+
+/*
+ * add platform devices
+ */
+static int __init unit_device_init(void)
+{
+	platform_device_register(&smc91c111_device);
+	return 0;
+}
+
+device_initcall(unit_device_init);
diff --git a/kernel/arch/mn10300/unit-asb2303/unit-init.c b/kernel/arch/mn10300/unit-asb2303/unit-init.c
new file mode 100644
index 000000000..834a76aa5
--- /dev/null
+++ b/kernel/arch/mn10300/unit-asb2303/unit-init.c
@@ -0,0 +1,68 @@
+/* ASB2303 initialisation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/intctl-regs.h>
+
+/*
+ * initialise some of the unit hardware before gdbstub is set up
+ */
+asmlinkage void __init unit_init(void)
+{
+	/* set up the external interrupts */
+	SET_XIRQ_TRIGGER(0, XIRQ_TRIGGER_HILEVEL);
+	SET_XIRQ_TRIGGER(2, XIRQ_TRIGGER_LOWLEVEL);
+	SET_XIRQ_TRIGGER(3, XIRQ_TRIGGER_HILEVEL);
+	SET_XIRQ_TRIGGER(4, XIRQ_TRIGGER_LOWLEVEL);
+	SET_XIRQ_TRIGGER(5, XIRQ_TRIGGER_LOWLEVEL);
+
+#ifdef CONFIG_EXT_SERIAL_IRQ_LEVEL
+	set_intr_level(XIRQ0, NUM2GxICR_LEVEL(CONFIG_EXT_SERIAL_IRQ_LEVEL));
+#endif
+
+#ifdef CONFIG_ETHERNET_IRQ_LEVEL
+	set_intr_level(XIRQ3, NUM2GxICR_LEVEL(CONFIG_ETHERNET_IRQ_LEVEL));
+#endif
+}
+
+/*
+ * initialise the rest of the unit hardware after gdbstub is ready
+ */
+void __init unit_setup(void)
+{
+}
+
+/*
+ * initialise the external interrupts used by a unit of this type
+ */
+void __init unit_init_IRQ(void)
+{
+	unsigned int extnum;
+
+	for (extnum = 0; extnum < NR_XIRQS; extnum++) {
+		switch (GET_XIRQ_TRIGGER(extnum)) {
+		case XIRQ_TRIGGER_HILEVEL:
+		case XIRQ_TRIGGER_LOWLEVEL:
+			mn10300_set_lateack_irq_type(XIRQ2IRQ(extnum));
+			break;
+		default:
+			break;
+		}
+	}
+}