Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 495 insertions, 0 deletions

diff --git a/kernel/arch/mn10300/Kconfig b/kernel/arch/mn10300/Kconfig
new file mode 100644
index 000000000..4434b54e1
--- /dev/null
+++ b/kernel/arch/mn10300/Kconfig
@@ -0,0 +1,495 @@
+config MN10300
+	def_bool y
+	select HAVE_OPROFILE
+	select GENERIC_IRQ_SHOW
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_KGDB
+	select GENERIC_ATOMIC64
+	select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
+	select VIRT_TO_BUS
+	select GENERIC_CLOCKEVENTS
+	select MODULES_USE_ELF_RELA
+	select OLD_SIGSUSPEND3
+	select OLD_SIGACTION
+	select HAVE_DEBUG_STACKOVERFLOW
+
+config AM33_2
+	def_bool n
+
+config AM33_3
+	def_bool n
+
+config AM34_2
+	def_bool n
+	select MN10300_HAS_ATOMIC_OPS_UNIT
+	select MN10300_HAS_CACHE_SNOOP
+
+config ERRATUM_NEED_TO_RELOAD_MMUCTR
+	def_bool y if AM33_3 || AM34_2
+
+config MMU
+	def_bool y
+
+config HIGHMEM
+	def_bool n
+
+config NUMA
+	def_bool n
+
+config UID16
+	def_bool y
+
+config RWSEM_GENERIC_SPINLOCK
+	def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_BUG
+	def_bool y
+
+config QUICKLIST
+	def_bool y
+
+config ARCH_HAS_ILOG2_U32
+	def_bool y
+
+config HOTPLUG_CPU
+	def_bool n
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+
+menu "Panasonic MN10300 system setup"
+
+choice
+	prompt "Unit type"
+	default MN10300_UNIT_ASB2303
+	help
+	  This option specifies board for which the kernel will be
+	  compiled. It affects the external peripherals catered for.
+
+config MN10300_UNIT_ASB2303
+	bool "ASB2303"
+
+config MN10300_UNIT_ASB2305
+	bool "ASB2305"
+
+config MN10300_UNIT_ASB2364
+	bool "ASB2364"
+	select SMSC911X_ARCH_HOOKS if SMSC911X
+
+endchoice
+
+choice
+	prompt "Processor support"
+	default MN10300_PROC_MN103E010
+	help
+	  This option specifies the processor for which the kernel will be
+	  compiled. It affects the on-chip peripherals catered for.
+
+config MN10300_PROC_MN103E010
+	bool "MN103E010"
+	depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
+	select AM33_2
+	select MN10300_PROC_HAS_TTYSM0
+	select MN10300_PROC_HAS_TTYSM1
+	select MN10300_PROC_HAS_TTYSM2
+
+config MN10300_PROC_MN2WS0050
+	bool "MN2WS0050"
+	depends on MN10300_UNIT_ASB2364
+	select AM34_2
+	select MN10300_PROC_HAS_TTYSM0
+	select MN10300_PROC_HAS_TTYSM1
+	select MN10300_PROC_HAS_TTYSM2
+
+endchoice
+
+config MN10300_HAS_ATOMIC_OPS_UNIT
+	def_bool n
+	help
+	  This should be enabled if the processor has an atomic ops unit
+	  capable of doing LL/SC equivalent operations.
+
+config FPU
+	bool "FPU present"
+	default y
+	depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
+
+config LAZY_SAVE_FPU
+	bool "Save FPU state lazily"
+	default y
+	depends on FPU && !SMP
+	help
+	  Enable this to be lazy in the saving of the FPU state to the owning
+	  task's thread struct.  This is useful if most tasks on the system
+	  don't use the FPU as only those tasks that use it will pass it
+	  between them, and the state needn't be saved for a task that isn't
+	  using it.
+
+	  This can't be so easily used on SMP as the process that owns the FPU
+	  state on a CPU may be currently running on another CPU, so for the
+	  moment, it is disabled.
+
+source "arch/mn10300/mm/Kconfig.cache"
+
+config MN10300_TLB_USE_PIDR
+	def_bool y
+
+menu "Memory layout options"
+
+config KERNEL_RAM_BASE_ADDRESS
+	hex "Base address of kernel RAM"
+	default "0x90000000"
+
+config INTERRUPT_VECTOR_BASE
+	hex "Base address of vector table"
+	default "0x90000000"
+	help
+	  The base address of the vector table will be programmed into
+          the TBR register. It must be on 16MiB address boundary.
+
+config KERNEL_TEXT_ADDRESS
+	hex "Base address of kernel"
+	default "0x90001000"
+
+config KERNEL_ZIMAGE_BASE_ADDRESS
+	hex "Base address of compressed vmlinux image"
+	default "0x50700000"
+
+config BOOT_STACK_OFFSET
+	hex
+	default	"0xF00"	if SMP
+	default	"0xFF0" if !SMP
+
+config BOOT_STACK_SIZE
+	hex
+	depends on SMP
+	default	"0x100"
+endmenu
+
+config SMP
+	bool "Symmetric multi-processing support"
+	default y
+	depends on MN10300_PROC_MN2WS0050
+	---help---
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N. If you have a system with more
+	  than one CPU, say Y.
+
+	  If you say N here, the kernel will run on uni- and multiprocessor
+	  machines, but will use only one CPU of a multiprocessor machine. If
+	  you say Y here, the kernel will run on many, but not all,
+	  uniprocessor machines. On a uniprocessor machine, the kernel
+	  will run faster if you say N here.
+
+	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
+	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int
+	depends on SMP
+	default "2"
+
+source "kernel/Kconfig.preempt"
+
+config MN10300_CURRENT_IN_E2
+	bool "Hold current task address in E2 register"
+	depends on !SMP
+	default y
+	help
+	  This option removes the E2/R2 register from the set available to gcc
+	  for normal use and instead uses it to store the address of the
+	  current process's task_struct whilst in the kernel.
+
+	  This means the kernel doesn't need to calculate the address each time
+	  "current" is used (take SP, AND with mask and dereference pointer
+	  just to get the address), and instead can just use E2+offset
+	  addressing each time.
+
+	  This has no effect on userspace.
+
+config MN10300_USING_JTAG
+	bool "Using JTAG to debug kernel"
+	default y
+	help
+	  This options indicates that JTAG will be used to debug the kernel. It
+	  suppresses the use of certain hardware debugging features, such as
+	  single-stepping, which are taken over completely by the JTAG unit.
+
+source "kernel/Kconfig.hz"
+
+config MN10300_RTC
+	bool "Using MN10300 RTC"
+	depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050
+	select GENERIC_CMOS_UPDATE
+	default n
+	help
+	  This option enables support for the RTC, thus enabling time to be
+	  tracked, even when system is powered down. This is available on-chip
+	  on the MN103E010.
+
+config MN10300_WD_TIMER
+	bool "Using MN10300 watchdog timer"
+	default y
+	help
+	  This options indicates that the watchdog timer will be used.
+
+config PCI
+	bool "Use PCI"
+	depends on MN10300_UNIT_ASB2305
+	default y
+	select GENERIC_PCI_IOMAP
+	help
+	  Some systems (such as the ASB2305) have PCI onboard. If you have one
+	  of these boards and you wish to use the PCI facilities, say Y here.
+
+	  The PCI-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>, contains valuable
+	  information about which PCI hardware does work under Linux and which
+	  doesn't.
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+menu "MN10300 internal serial options"
+
+config MN10300_PROC_HAS_TTYSM0
+	bool
+	default n
+
+config MN10300_PROC_HAS_TTYSM1
+	bool
+	default n
+
+config MN10300_PROC_HAS_TTYSM2
+	bool
+	default n
+
+config MN10300_TTYSM
+	bool "Support for ttySM serial ports"
+	depends on MN10300
+	default y
+	select SERIAL_CORE
+	help
+	  This option enables support for the on-chip serial ports that the
+	  MN10300 has available.
+
+config MN10300_TTYSM_CONSOLE
+	bool "Support for console on ttySM serial ports"
+	depends on MN10300_TTYSM
+	select SERIAL_CORE_CONSOLE
+	help
+	  This option enables support for a console on the on-chip serial ports
+	  that the MN10300 has available.
+
+#
+# /dev/ttySM0
+#
+config MN10300_TTYSM0
+	bool "Enable SIF0 (/dev/ttySM0)"
+	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
+	help
+	  Enable access to SIF0 through /dev/ttySM0 or gdb-stub
+
+choice
+	prompt "Select the timer to supply the clock for SIF0"
+	default MN10300_TTYSM0_TIMER8
+	depends on MN10300_TTYSM0
+
+config MN10300_TTYSM0_TIMER8
+	bool "Use timer 8 (16-bit)"
+
+config MN10300_TTYSM0_TIMER2
+	bool "Use timer 2 (8-bit)"
+
+endchoice
+
+#
+# /dev/ttySM1
+#
+config MN10300_TTYSM1
+	bool "Enable SIF1 (/dev/ttySM1)"
+	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
+	help
+	  Enable access to SIF1 through /dev/ttySM1 or gdb-stub
+
+choice
+	prompt "Select the timer to supply the clock for SIF1"
+	default MN10300_TTYSM1_TIMER12 \
+		if !(AM33_2 || AM33_3)
+	default MN10300_TTYSM1_TIMER9 \
+		if AM33_2 || AM33_3
+	depends on MN10300_TTYSM1
+
+config MN10300_TTYSM1_TIMER12
+	bool "Use timer 12 (16-bit)"
+	depends on !(AM33_2 || AM33_3)
+
+config MN10300_TTYSM1_TIMER9
+	bool "Use timer 9 (16-bit)"
+	depends on AM33_2 || AM33_3
+
+config MN10300_TTYSM1_TIMER3
+	bool "Use timer 3 (8-bit)"
+	depends on AM33_2 || AM33_3
+
+endchoice
+
+#
+# /dev/ttySM2
+#
+config MN10300_TTYSM2
+	bool "Enable SIF2 (/dev/ttySM2)"
+	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
+	help
+	  Enable access to SIF2 through /dev/ttySM2 or gdb-stub
+
+choice
+	prompt "Select the timer to supply the clock for SIF2"
+	default MN10300_TTYSM2_TIMER3 \
+		if !(AM33_2 || AM33_3)
+	default MN10300_TTYSM2_TIMER10 \
+		if AM33_2 || AM33_3
+	depends on MN10300_TTYSM2
+
+config MN10300_TTYSM2_TIMER9
+	bool "Use timer 9 (16-bit)"
+	depends on !(AM33_2 || AM33_3)
+
+config MN10300_TTYSM2_TIMER1
+	bool "Use timer 1 (8-bit)"
+	depends on !(AM33_2 || AM33_3)
+
+config MN10300_TTYSM2_TIMER3
+	bool "Use timer 3 (8-bit)"
+	depends on !(AM33_2 || AM33_3)
+
+config MN10300_TTYSM2_TIMER10
+	bool "Use timer 10 (16-bit)"
+	depends on AM33_2 || AM33_3
+
+endchoice
+
+config MN10300_TTYSM2_CTS
+	bool "Enable the use of the CTS line /dev/ttySM2"
+	depends on MN10300_TTYSM2 && AM33_2
+
+endmenu
+
+menu "Interrupt request priority options"
+
+comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)"
+
+comment "____Non-maskable interrupt levels____"
+comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial"
+
+config DEBUGGER_IRQ_LEVEL
+	int "DEBUGGER interrupt priority"
+	depends on KERNEL_DEBUGGER
+	range 0 1 if LINUX_CLI_LEVEL = 2
+	range 0 2 if LINUX_CLI_LEVEL = 3
+	range 0 3 if LINUX_CLI_LEVEL = 4
+	range 0 4 if LINUX_CLI_LEVEL = 5
+	range 0 5 if LINUX_CLI_LEVEL = 6
+	default 0
+
+comment "The following must be set to a higher priority than local_irq_disable()"
+
+config MN10300_SERIAL_IRQ_LEVEL
+	int "MN10300 on-chip serial interrupt priority"
+	depends on MN10300_TTYSM
+	range 1 1 if LINUX_CLI_LEVEL = 2
+	range 1 2 if LINUX_CLI_LEVEL = 3
+	range 1 3 if LINUX_CLI_LEVEL = 4
+	range 1 4 if LINUX_CLI_LEVEL = 5
+	range 1 5 if LINUX_CLI_LEVEL = 6
+	default 1
+
+comment "-"
+comment "____Maskable interrupt levels____"
+
+config LINUX_CLI_LEVEL
+	int "The highest interrupt priority excluded by local_irq_disable() (2-6)"
+	range 2 6
+	default 2
+	help
+	  local_irq_disable() doesn't actually disable maskable interrupts -
+	  what it does is restrict the levels of interrupt which are permitted
+	  (a lower level indicates a higher priority) by lowering the value in
+	  EPSW.IM from 7.  Any interrupt is permitted for which the level is
+	  lower than EPSW.IM.
+
+	  Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip
+	  serial DMA interrupts are allowed to interrupt normal disabled
+	  sections.
+
+comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL"
+
+config TIMER_IRQ_LEVEL
+	int "Kernel timer interrupt priority"
+	range LINUX_CLI_LEVEL 6
+	default 4
+
+config PCI_IRQ_LEVEL
+	int "PCI interrupt priority"
+	depends on PCI
+	range LINUX_CLI_LEVEL 6
+	default 5
+
+config ETHERNET_IRQ_LEVEL
+	int "Ethernet interrupt priority"
+	depends on SMC91X || SMC911X || SMSC911X
+	range LINUX_CLI_LEVEL 6
+	default 6
+
+config EXT_SERIAL_IRQ_LEVEL
+	int "External serial port interrupt priority"
+	depends on SERIAL_8250
+	range LINUX_CLI_LEVEL 6
+	default 6
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/mn10300/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"