diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/arch/mips/sni | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/arch/mips/sni')
-rw-r--r-- | kernel/arch/mips/sni/Makefile | 6 | ||||
-rw-r--r-- | kernel/arch/mips/sni/Platform | 11 | ||||
-rw-r--r-- | kernel/arch/mips/sni/a20r.c | 249 | ||||
-rw-r--r-- | kernel/arch/mips/sni/eisa.c | 50 | ||||
-rw-r--r-- | kernel/arch/mips/sni/irq.c | 82 | ||||
-rw-r--r-- | kernel/arch/mips/sni/pcimt.c | 332 | ||||
-rw-r--r-- | kernel/arch/mips/sni/pcit.c | 291 | ||||
-rw-r--r-- | kernel/arch/mips/sni/reset.c | 45 | ||||
-rw-r--r-- | kernel/arch/mips/sni/rm200.c | 490 | ||||
-rw-r--r-- | kernel/arch/mips/sni/setup.c | 263 | ||||
-rw-r--r-- | kernel/arch/mips/sni/time.c | 190 |
11 files changed, 2009 insertions, 0 deletions
diff --git a/kernel/arch/mips/sni/Makefile b/kernel/arch/mips/sni/Makefile new file mode 100644 index 000000000..9d3bad320 --- /dev/null +++ b/kernel/arch/mips/sni/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the SNI specific part of the kernel +# + +obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o +obj-$(CONFIG_EISA) += eisa.o diff --git a/kernel/arch/mips/sni/Platform b/kernel/arch/mips/sni/Platform new file mode 100644 index 000000000..2644a9d63 --- /dev/null +++ b/kernel/arch/mips/sni/Platform @@ -0,0 +1,11 @@ +# +# SNI RM +# +platform-$(CONFIG_SNI_RM) += sni/ +cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm +ifdef CONFIG_CPU_LITTLE_ENDIAN +load-$(CONFIG_SNI_RM) += 0xffffffff80600000 +else +load-$(CONFIG_SNI_RM) += 0xffffffff80030000 +endif +all-$(CONFIG_SNI_RM) := $(COMPRESSION_FNAME).ecoff diff --git a/kernel/arch/mips/sni/a20r.c b/kernel/arch/mips/sni/a20r.c new file mode 100644 index 000000000..f9407e170 --- /dev/null +++ b/kernel/arch/mips/sni/a20r.c @@ -0,0 +1,249 @@ +/* + * A20R specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> + +#include <asm/sni.h> +#include <asm/time.h> + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port a20r_data[] = { + PORT(0x3f8, 4), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device a20r_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = a20r_data, + }, +}; + +static struct resource a20r_ds1216_rsrc[] = { + { + .start = 0x1c081ffc, + .end = 0x1c081fff, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device a20r_ds1216_device = { + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc), + .resource = a20r_ds1216_rsrc +}; + +static struct resource snirm_82596_rsrc[] = { + { + .start = 0x18000000, + .end = 0x18000004, + .flags = IORESOURCE_MEM + }, + { + .start = 0x18010000, + .end = 0x18010004, + .flags = IORESOURCE_MEM + }, + { + .start = 0x1ff00000, + .end = 0x1ff00020, + .flags = IORESOURCE_MEM + }, + { + .start = 22, + .end = 22, + .flags = IORESOURCE_IRQ + }, + { + .flags = 0x01 /* 16bit mpu port access */ + } +}; + +static struct platform_device snirm_82596_pdev = { + .name = "snirm_82596", + .num_resources = ARRAY_SIZE(snirm_82596_rsrc), + .resource = snirm_82596_rsrc +}; + +static struct resource snirm_53c710_rsrc[] = { + { + .start = 0x19000000, + .end = 0x190fffff, + .flags = IORESOURCE_MEM + }, + { + .start = 19, + .end = 19, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device snirm_53c710_pdev = { + .name = "snirm_53c710", + .num_resources = ARRAY_SIZE(snirm_53c710_rsrc), + .resource = snirm_53c710_rsrc +}; + +static struct resource sc26xx_rsrc[] = { + { + .start = 0x1c070000, + .end = 0x1c0700ff, + .flags = IORESOURCE_MEM + }, + { + .start = 20, + .end = 20, + .flags = IORESOURCE_IRQ + } +}; + +#include <linux/platform_data/serial-sccnxp.h> + +static struct sccnxp_pdata sccnxp_data = { + .reg_shift = 2, + .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) | + MCTRL_SIG(RTS_OP, LINE_OP3) | + MCTRL_SIG(DSR_IP, LINE_IP5) | + MCTRL_SIG(DCD_IP, LINE_IP6), + .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) | + MCTRL_SIG(RTS_OP, LINE_OP1) | + MCTRL_SIG(DSR_IP, LINE_IP0) | + MCTRL_SIG(CTS_IP, LINE_IP1) | + MCTRL_SIG(DCD_IP, LINE_IP2) | + MCTRL_SIG(RNG_IP, LINE_IP3), +}; + +static struct platform_device sc26xx_pdev = { + .name = "sc2681", + .resource = sc26xx_rsrc, + .num_resources = ARRAY_SIZE(sc26xx_rsrc), + .dev = { + .platform_data = &sccnxp_data, + }, +}; + +static u32 a20r_ack_hwint(void) +{ + u32 status = read_c0_status(); + + write_c0_status(status | 0x00010000); + asm volatile( + " .set push \n" + " .set noat \n" + " .set noreorder \n" + " lw $1, 0(%0) \n" + " sb $0, 0(%1) \n" + " sync \n" + " lb %1, 0(%1) \n" + " b 1f \n" + " ori %1, $1, 2 \n" + " .align 8 \n" + "1: \n" + " nop \n" + " sw %1, 0(%0) \n" + " sync \n" + " li %1, 0x20 \n" + "2: \n" + " nop \n" + " bnez %1,2b \n" + " addiu %1, -1 \n" + " sw $1, 0(%0) \n" + " sync \n" + ".set pop \n" + : + : "Jr" (PCIMT_UCONF), "Jr" (0xbc000000)); + write_c0_status(status); + + return status; +} + +static inline void unmask_a20r_irq(struct irq_data *d) +{ + set_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE)); + irq_enable_hazard(); +} + +static inline void mask_a20r_irq(struct irq_data *d) +{ + clear_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE)); + irq_disable_hazard(); +} + +static struct irq_chip a20r_irq_type = { + .name = "A20R", + .irq_mask = mask_a20r_irq, + .irq_unmask = unmask_a20r_irq, +}; + +/* + * hwint 0 receive all interrupts + */ +static void a20r_hwint(void) +{ + u32 cause, status; + int irq; + + clear_c0_status(IE_IRQ0); + status = a20r_ack_hwint(); + cause = read_c0_cause(); + + irq = ffs(((cause & status) >> 8) & 0xf8); + if (likely(irq > 0)) + do_IRQ(SNI_A20R_IRQ_BASE + irq - 1); + set_c0_status(IE_IRQ0); +} + +void __init sni_a20r_irq_init(void) +{ + int i; + + for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++) + irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq); + sni_hwint = a20r_hwint; + change_c0_status(ST0_IM, IE_IRQ0); + setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq); +} + +void sni_a20r_init(void) +{ + /* FIXME, remove if not needed */ +} + +static int __init snirm_a20r_setup_devinit(void) +{ + switch (sni_brd_type) { + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + platform_device_register(&snirm_82596_pdev); + platform_device_register(&snirm_53c710_pdev); + platform_device_register(&sc26xx_pdev); + platform_device_register(&a20r_serial8250_device); + platform_device_register(&a20r_ds1216_device); + sni_eisa_root_init(); + break; + } + return 0; +} + +device_initcall(snirm_a20r_setup_devinit); diff --git a/kernel/arch/mips/sni/eisa.c b/kernel/arch/mips/sni/eisa.c new file mode 100644 index 000000000..179b5d556 --- /dev/null +++ b/kernel/arch/mips/sni/eisa.c @@ -0,0 +1,50 @@ +/* + * Virtual EISA root driver. + * Acts as a placeholder if we don't have a proper EISA bridge. + * + * (C) 2003 Marc Zyngier <maz@wild-wind.fr.eu.org> + * modified for SNI usage by Thomas Bogendoerfer + * + * This code is released under the GPL version 2. + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/eisa.h> +#include <linux/init.h> + +/* The default EISA device parent (virtual root device). + * Now use a platform device, since that's the obvious choice. */ + +static struct platform_device eisa_root_dev = { + .name = "eisa", + .id = 0, +}; + +static struct eisa_root_device eisa_bus_root = { + .dev = &eisa_root_dev.dev, + .bus_base_addr = 0, + .res = &ioport_resource, + .slots = EISA_MAX_SLOTS, + .dma_mask = 0xffffffff, + .force_probe = 1, +}; + +int __init sni_eisa_root_init(void) +{ + int r; + + r = platform_device_register(&eisa_root_dev); + if (!r) + return r; + + dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root); + + if (eisa_root_register(&eisa_bus_root)) { + /* A real bridge may have been registered before + * us. So quietly unregister. */ + platform_device_unregister(&eisa_root_dev); + return -1; + } + return 0; +} diff --git a/kernel/arch/mips/sni/irq.c b/kernel/arch/mips/sni/irq.c new file mode 100644 index 000000000..ac61b90bc --- /dev/null +++ b/kernel/arch/mips/sni/irq.c @@ -0,0 +1,82 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1992 Linus Torvalds + * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 2006 Thomas Bogendoerfer + */ +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> + +#include <asm/i8259.h> +#include <asm/io.h> +#include <asm/sni.h> +#include <asm/irq.h> +#include <asm/irq_cpu.h> + +void (*sni_hwint)(void); + +asmlinkage void plat_irq_dispatch(void) +{ + sni_hwint(); +} + +/* ISA irq handler */ +static irqreturn_t sni_isa_irq_handler(int dummy, void *p) +{ + int irq; + + irq = i8259_irq(); + if (unlikely(irq < 0)) + return IRQ_NONE; + + generic_handle_irq(irq); + return IRQ_HANDLED; +} + +struct irqaction sni_isa_irq = { + .handler = sni_isa_irq_handler, + .name = "ISA", + .flags = IRQF_SHARED +}; + +/* + * On systems with i8259-style interrupt controllers we assume for + * driver compatibility reasons interrupts 0 - 15 to be the i8295 + * interrupts even if the hardware uses a different interrupt numbering. + */ +void __init arch_init_irq(void) +{ + init_i8259_irqs(); /* Integrated i8259 */ + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_irq_init(); + break; + + case SNI_BRD_PCI_TOWER: + sni_pcit_irq_init(); + break; + + case SNI_BRD_PCI_TOWER_CPLUS: + sni_pcit_cplus_irq_init(); + break; + + case SNI_BRD_RM200: + sni_rm200_irq_init(); + break; + + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_MTOWER_CPLUS: + sni_pcimt_irq_init(); + break; + } +} diff --git a/kernel/arch/mips/sni/pcimt.c b/kernel/arch/mips/sni/pcimt.c new file mode 100644 index 000000000..12336c2a6 --- /dev/null +++ b/kernel/arch/mips/sni/pcimt.c @@ -0,0 +1,332 @@ +/* + * PCIMT specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> + +#include <asm/sni.h> +#include <asm/time.h> +#include <asm/i8259.h> +#include <asm/irq_cpu.h> + +#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF) +#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE) + +static void __init sni_pcimt_sc_init(void) +{ + unsigned int scsiz, sc_size; + + scsiz = cacheconf & 7; + if (scsiz == 0) { + printk("Second level cache is deactivated.\n"); + return; + } + if (scsiz >= 6) { + printk("Invalid second level cache size configured, " + "deactivating second level cache.\n"); + cacheconf = 0; + return; + } + + sc_size = 128 << scsiz; + printk("%dkb second level cache detected, deactivating.\n", sc_size); + cacheconf = 0; +} + + +/* + * A bit more gossip about the iron we're running on ... + */ +static inline void sni_pcimt_detect(void) +{ + char boardtype[80]; + unsigned char csmsr; + char *p = boardtype; + unsigned int asic; + + csmsr = *(volatile unsigned char *)PCIMT_CSMSR; + + p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300"); + if ((csmsr & 0x80) == 0) + p += sprintf(p, ", board revision %s", + (csmsr & 0x20) ? "D" : "C"); + asic = csmsr & 0x80; + asic = (csmsr & 0x08) ? asic : !asic; + p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1"); + printk("%s.\n", boardtype); +} + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port pcimt_data[] = { + PORT(0x3f8, 4), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device pcimt_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = pcimt_data, + }, +}; + +static struct resource pcimt_cmos_rsrc[] = { + { + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device pcimt_cmos_device = { + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc), + .resource = pcimt_cmos_rsrc +}; + + +static struct resource sni_io_resource = { + .start = 0x00000000UL, + .end = 0x03bfffffUL, + .name = "PCIMT IO MEM", + .flags = IORESOURCE_IO, +}; + +static struct resource pcimt_io_resources[] = { + { + .start = 0x00, + .end = 0x1f, + .name = "dma1", + .flags = IORESOURCE_BUSY + }, { + .start = 0x40, + .end = 0x5f, + .name = "timer", + .flags = IORESOURCE_BUSY + }, { + .start = 0x60, + .end = 0x6f, + .name = "keyboard", + .flags = IORESOURCE_BUSY + }, { + .start = 0x80, + .end = 0x8f, + .name = "dma page reg", + .flags = IORESOURCE_BUSY + }, { + .start = 0xc0, + .end = 0xdf, + .name = "dma2", + .flags = IORESOURCE_BUSY + }, { + .start = 0xcfc, + .end = 0xcff, + .name = "PCI config data", + .flags = IORESOURCE_BUSY + } +}; + +static struct resource pcimt_mem_resources[] = { + { + /* + * this region should only be 4 bytes long, + * but it's 16MB on all RM300C I've checked + */ + .start = 0x1a000000, + .end = 0x1affffff, + .name = "PCI INT ACK", + .flags = IORESOURCE_BUSY + } +}; + +static struct resource sni_mem_resource = { + .start = 0x18000000UL, + .end = 0x1fbfffffUL, + .name = "PCIMT PCI MEM", + .flags = IORESOURCE_MEM +}; + +static void __init sni_pcimt_resource_init(void) +{ + int i; + + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++) + request_resource(&sni_io_resource, pcimt_io_resources + i); + /* request MEM space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++) + request_resource(&sni_mem_resource, pcimt_mem_resources + i); +} + +extern struct pci_ops sni_pcimt_ops; + +#ifdef CONFIG_PCI +static struct pci_controller sni_controller = { + .pci_ops = &sni_pcimt_ops, + .mem_resource = &sni_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &sni_io_resource, + .io_offset = 0x00000000UL, + .io_map_base = SNI_PORT_BASE +}; +#endif + +static void enable_pcimt_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq - PCIMT_IRQ_INT2); + + *(volatile u8 *) PCIMT_IRQSEL |= mask; +} + +void disable_pcimt_irq(struct irq_data *d) +{ + unsigned int mask = ~(1 << (d->irq - PCIMT_IRQ_INT2)); + + *(volatile u8 *) PCIMT_IRQSEL &= mask; +} + +static struct irq_chip pcimt_irq_type = { + .name = "PCIMT", + .irq_mask = disable_pcimt_irq, + .irq_unmask = enable_pcimt_irq, +}; + +/* + * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug + * button interrupts. Later ... + */ +static void pcimt_hwint0(void) +{ + panic("Received int0 but no handler yet ..."); +} + +/* + * hwint 1 deals with EISA and SCSI interrupts, + * + * The EISA_INT bit in CSITPEND is high active, all others are low active. + */ +static void pcimt_hwint1(void) +{ + u8 pend = *(volatile char *)PCIMT_CSITPEND; + unsigned long flags; + + if (pend & IT_EISA) { + int irq; + /* + * Note: ASIC PCI's builtin interrupt acknowledge feature is + * broken. Using it may result in loss of some or all i8259 + * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ... + */ + irq = i8259_irq(); + if (unlikely(irq < 0)) + return; + + do_IRQ(irq); + } + + if (!(pend & IT_SCSI)) { + flags = read_c0_status(); + clear_c0_status(ST0_IM); + do_IRQ(PCIMT_IRQ_SCSI); + write_c0_status(flags); + } +} + +/* + * hwint 3 should deal with the PCI A - D interrupts, + */ +static void pcimt_hwint3(void) +{ + u8 pend = *(volatile char *)PCIMT_CSITPEND; + int irq; + + pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD); + pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD); + clear_c0_status(IE_IRQ3); + irq = PCIMT_IRQ_INT2 + ffs(pend) - 1; + do_IRQ(irq); + set_c0_status(IE_IRQ3); +} + +static void sni_pcimt_hwint(void) +{ + u32 pending = read_c0_cause() & read_c0_status(); + + if (pending & C_IRQ5) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & C_IRQ4) + do_IRQ(MIPS_CPU_IRQ_BASE + 6); + else if (pending & C_IRQ3) + pcimt_hwint3(); + else if (pending & C_IRQ1) + pcimt_hwint1(); + else if (pending & C_IRQ0) { + pcimt_hwint0(); + } +} + +void __init sni_pcimt_irq_init(void) +{ + int i; + + *(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA; + mips_cpu_irq_init(); + /* Actually we've got more interrupts to handle ... */ + for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++) + irq_set_chip_and_handler(i, &pcimt_irq_type, handle_level_irq); + sni_hwint = sni_pcimt_hwint; + change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3); +} + +void __init sni_pcimt_init(void) +{ + sni_pcimt_detect(); + sni_pcimt_sc_init(); + ioport_resource.end = sni_io_resource.end; +#ifdef CONFIG_PCI + PCIBIOS_MIN_IO = 0x9000; + register_pci_controller(&sni_controller); +#endif + sni_pcimt_resource_init(); +} + +static int __init snirm_pcimt_setup_devinit(void) +{ + switch (sni_brd_type) { + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_MTOWER_CPLUS: + platform_device_register(&pcimt_serial8250_device); + platform_device_register(&pcimt_cmos_device); + break; + } + + return 0; +} + +device_initcall(snirm_pcimt_setup_devinit); diff --git a/kernel/arch/mips/sni/pcit.c b/kernel/arch/mips/sni/pcit.c new file mode 100644 index 000000000..05bb51676 --- /dev/null +++ b/kernel/arch/mips/sni/pcit.c @@ -0,0 +1,291 @@ +/* + * PCI Tower specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pci.h> +#include <linux/serial_8250.h> + +#include <asm/sni.h> +#include <asm/time.h> +#include <asm/irq_cpu.h> + + +#define PORT(_base,_irq) \ + { \ + .iobase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF, \ + } + +static struct plat_serial8250_port pcit_data[] = { + PORT(0x3f8, 0), + PORT(0x2f8, 3), + { }, +}; + +static struct platform_device pcit_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = pcit_data, + }, +}; + +static struct plat_serial8250_port pcit_cplus_data[] = { + PORT(0x3f8, 0), + PORT(0x2f8, 3), + PORT(0x3e8, 4), + PORT(0x2e8, 3), + { }, +}; + +static struct platform_device pcit_cplus_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = pcit_cplus_data, + }, +}; + +static struct resource pcit_cmos_rsrc[] = { + { + .start = 0x70, + .end = 0x71, + .flags = IORESOURCE_IO + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device pcit_cmos_device = { + .name = "rtc_cmos", + .num_resources = ARRAY_SIZE(pcit_cmos_rsrc), + .resource = pcit_cmos_rsrc +}; + +static struct platform_device pcit_pcspeaker_pdev = { + .name = "pcspkr", + .id = -1, +}; + +static struct resource sni_io_resource = { + .start = 0x00000000UL, + .end = 0x03bfffffUL, + .name = "PCIT IO", + .flags = IORESOURCE_IO, +}; + +static struct resource pcit_io_resources[] = { + { + .start = 0x00, + .end = 0x1f, + .name = "dma1", + .flags = IORESOURCE_BUSY + }, { + .start = 0x40, + .end = 0x5f, + .name = "timer", + .flags = IORESOURCE_BUSY + }, { + .start = 0x60, + .end = 0x6f, + .name = "keyboard", + .flags = IORESOURCE_BUSY + }, { + .start = 0x80, + .end = 0x8f, + .name = "dma page reg", + .flags = IORESOURCE_BUSY + }, { + .start = 0xc0, + .end = 0xdf, + .name = "dma2", + .flags = IORESOURCE_BUSY + }, { + .start = 0xcf8, + .end = 0xcfb, + .name = "PCI config addr", + .flags = IORESOURCE_BUSY + }, { + .start = 0xcfc, + .end = 0xcff, + .name = "PCI config data", + .flags = IORESOURCE_BUSY + } +}; + +static void __init sni_pcit_resource_init(void) +{ + int i; + + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++) + request_resource(&sni_io_resource, pcit_io_resources + i); +} + + +extern struct pci_ops sni_pcit_ops; + +#ifdef CONFIG_PCI +static struct resource sni_mem_resource = { + .start = 0x18000000UL, + .end = 0x1fbfffffUL, + .name = "PCIT PCI MEM", + .flags = IORESOURCE_MEM +}; + +static struct pci_controller sni_pcit_controller = { + .pci_ops = &sni_pcit_ops, + .mem_resource = &sni_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &sni_io_resource, + .io_offset = 0x00000000UL, + .io_map_base = SNI_PORT_BASE +}; +#endif /* CONFIG_PCI */ + +static void enable_pcit_irq(struct irq_data *d) +{ + u32 mask = 1 << (d->irq - SNI_PCIT_INT_START + 24); + + *(volatile u32 *)SNI_PCIT_INT_REG |= mask; +} + +void disable_pcit_irq(struct irq_data *d) +{ + u32 mask = 1 << (d->irq - SNI_PCIT_INT_START + 24); + + *(volatile u32 *)SNI_PCIT_INT_REG &= ~mask; +} + +static struct irq_chip pcit_irq_type = { + .name = "PCIT", + .irq_mask = disable_pcit_irq, + .irq_unmask = enable_pcit_irq, +}; + +static void pcit_hwint1(void) +{ + u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG; + int irq; + + clear_c0_status(IE_IRQ1); + irq = ffs((pending >> 16) & 0x7f); + + if (likely(irq > 0)) + do_IRQ(irq + SNI_PCIT_INT_START - 1); + set_c0_status(IE_IRQ1); +} + +static void pcit_hwint0(void) +{ + u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG; + int irq; + + clear_c0_status(IE_IRQ0); + irq = ffs((pending >> 16) & 0x3f); + + if (likely(irq > 0)) + do_IRQ(irq + SNI_PCIT_INT_START - 1); + set_c0_status(IE_IRQ0); +} + +static void sni_pcit_hwint(void) +{ + u32 pending = read_c0_cause() & read_c0_status(); + + if (pending & C_IRQ1) + pcit_hwint1(); + else if (pending & C_IRQ2) + do_IRQ(MIPS_CPU_IRQ_BASE + 4); + else if (pending & C_IRQ3) + do_IRQ(MIPS_CPU_IRQ_BASE + 5); + else if (pending & C_IRQ5) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); +} + +static void sni_pcit_hwint_cplus(void) +{ + u32 pending = read_c0_cause() & read_c0_status(); + + if (pending & C_IRQ0) + pcit_hwint0(); + else if (pending & C_IRQ1) + do_IRQ(MIPS_CPU_IRQ_BASE + 3); + else if (pending & C_IRQ2) + do_IRQ(MIPS_CPU_IRQ_BASE + 4); + else if (pending & C_IRQ3) + do_IRQ(MIPS_CPU_IRQ_BASE + 5); + else if (pending & C_IRQ5) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); +} + +void __init sni_pcit_irq_init(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) + irq_set_chip_and_handler(i, &pcit_irq_type, handle_level_irq); + *(volatile u32 *)SNI_PCIT_INT_REG = 0; + sni_hwint = sni_pcit_hwint; + change_c0_status(ST0_IM, IE_IRQ1); + setup_irq(SNI_PCIT_INT_START + 6, &sni_isa_irq); +} + +void __init sni_pcit_cplus_irq_init(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) + irq_set_chip_and_handler(i, &pcit_irq_type, handle_level_irq); + *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000; + sni_hwint = sni_pcit_hwint_cplus; + change_c0_status(ST0_IM, IE_IRQ0); + setup_irq(MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq); +} + +void __init sni_pcit_init(void) +{ + ioport_resource.end = sni_io_resource.end; +#ifdef CONFIG_PCI + PCIBIOS_MIN_IO = 0x9000; + register_pci_controller(&sni_pcit_controller); +#endif + sni_pcit_resource_init(); +} + +static int __init snirm_pcit_setup_devinit(void) +{ + switch (sni_brd_type) { + case SNI_BRD_PCI_TOWER: + platform_device_register(&pcit_serial8250_device); + platform_device_register(&pcit_cmos_device); + platform_device_register(&pcit_pcspeaker_pdev); + break; + + case SNI_BRD_PCI_TOWER_CPLUS: + platform_device_register(&pcit_cplus_serial8250_device); + platform_device_register(&pcit_cmos_device); + platform_device_register(&pcit_pcspeaker_pdev); + break; + } + return 0; +} + +device_initcall(snirm_pcit_setup_devinit); diff --git a/kernel/arch/mips/sni/reset.c b/kernel/arch/mips/sni/reset.c new file mode 100644 index 000000000..244f94276 --- /dev/null +++ b/kernel/arch/mips/sni/reset.c @@ -0,0 +1,45 @@ +/* + * linux/arch/mips/sni/process.c + * + * Reset a SNI machine. + */ +#include <asm/io.h> +#include <asm/reboot.h> +#include <asm/sni.h> + +/* + * This routine reboots the machine by asking the keyboard + * controller to pulse the reset-line low. We try that for a while, + * and if it doesn't work, we do some other stupid things. + */ +static inline void kb_wait(void) +{ + int i; + + for (i = 0; i < 0x10000; i++) + if ((inb_p(0x64) & 0x02) == 0) + break; +} + +/* XXX This ends up at the ARC firmware prompt ... */ +void sni_machine_restart(char *command) +{ + int i, j; + + /* This does a normal via the keyboard controller like a PC. + We can do that easier ... */ + local_irq_disable(); + for (;;) { + for (i = 0; i < 100; i++) { + kb_wait(); + for (j = 0; j < 100000 ; j++) + /* nothing */; + outb_p(0xfe, 0x64); /* pulse reset low */ + } + } +} + +void sni_machine_power_off(void) +{ + *(volatile unsigned char *)PCIMT_CSWCSM = 0xfd; +} diff --git a/kernel/arch/mips/sni/rm200.c b/kernel/arch/mips/sni/rm200.c new file mode 100644 index 000000000..a046b3026 --- /dev/null +++ b/kernel/arch/mips/sni/rm200.c @@ -0,0 +1,490 @@ +/* + * RM200 specific code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * i8259 parts ripped out of arch/mips/kernel/i8259.c + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/io.h> + +#include <asm/sni.h> +#include <asm/time.h> +#include <asm/irq_cpu.h> + +#define RM200_I8259A_IRQ_BASE 32 + +#define MEMPORT(_base,_irq) \ + { \ + .mapbase = _base, \ + .irq = _irq, \ + .uartclk = 1843200, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP, \ + } + +static struct plat_serial8250_port rm200_data[] = { + MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4), + MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3), + { }, +}; + +static struct platform_device rm200_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = rm200_data, + }, +}; + +static struct resource rm200_ds1216_rsrc[] = { + { + .start = 0x1cd41ffc, + .end = 0x1cd41fff, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device rm200_ds1216_device = { + .name = "rtc-ds1216", + .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc), + .resource = rm200_ds1216_rsrc +}; + +static struct resource snirm_82596_rm200_rsrc[] = { + { + .start = 0x18000000, + .end = 0x180fffff, + .flags = IORESOURCE_MEM + }, + { + .start = 0x1b000000, + .end = 0x1b000004, + .flags = IORESOURCE_MEM + }, + { + .start = 0x1ff00000, + .end = 0x1ff00020, + .flags = IORESOURCE_MEM + }, + { + .start = 27, + .end = 27, + .flags = IORESOURCE_IRQ + }, + { + .flags = 0x00 + } +}; + +static struct platform_device snirm_82596_rm200_pdev = { + .name = "snirm_82596", + .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc), + .resource = snirm_82596_rm200_rsrc +}; + +static struct resource snirm_53c710_rm200_rsrc[] = { + { + .start = 0x19000000, + .end = 0x190fffff, + .flags = IORESOURCE_MEM + }, + { + .start = 26, + .end = 26, + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device snirm_53c710_rm200_pdev = { + .name = "snirm_53c710", + .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc), + .resource = snirm_53c710_rm200_rsrc +}; + +static int __init snirm_setup_devinit(void) +{ + if (sni_brd_type == SNI_BRD_RM200) { + platform_device_register(&rm200_serial8250_device); + platform_device_register(&rm200_ds1216_device); + platform_device_register(&snirm_82596_rm200_pdev); + platform_device_register(&snirm_53c710_rm200_pdev); + sni_eisa_root_init(); + } + return 0; +} + +device_initcall(snirm_setup_devinit); + +/* + * RM200 has an ISA and an EISA bus. The iSA bus is only used + * for onboard devices and also has twi i8259 PICs. Since these + * PICs are no accessible via inb/outb the following code uses + * readb/writeb to access them + */ + +static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock); +#define PIC_CMD 0x00 +#define PIC_IMR 0x01 +#define PIC_ISR PIC_CMD +#define PIC_POLL PIC_ISR +#define PIC_OCW3 PIC_ISR + +/* i8259A PIC related value */ +#define PIC_CASCADE_IR 2 +#define MASTER_ICW4_DEFAULT 0x01 +#define SLAVE_ICW4_DEFAULT 0x01 + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +static unsigned int rm200_cached_irq_mask = 0xffff; +static __iomem u8 *rm200_pic_master; +static __iomem u8 *rm200_pic_slave; + +#define cached_master_mask (rm200_cached_irq_mask) +#define cached_slave_mask (rm200_cached_irq_mask >> 8) + +static void sni_rm200_disable_8259A_irq(struct irq_data *d) +{ + unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE; + unsigned long flags; + + mask = 1 << irq; + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + rm200_cached_irq_mask |= mask; + if (irq & 8) + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + else + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); +} + +static void sni_rm200_enable_8259A_irq(struct irq_data *d) +{ + unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE; + unsigned long flags; + + mask = ~(1 << irq); + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + rm200_cached_irq_mask &= mask; + if (irq & 8) + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + else + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); +} + +static inline int sni_rm200_i8259A_irq_real(unsigned int irq) +{ + int value; + int irqmask = 1 << irq; + + if (irq < 8) { + writeb(0x0B, rm200_pic_master + PIC_CMD); + value = readb(rm200_pic_master + PIC_CMD) & irqmask; + writeb(0x0A, rm200_pic_master + PIC_CMD); + return value; + } + writeb(0x0B, rm200_pic_slave + PIC_CMD); /* ISR register */ + value = readb(rm200_pic_slave + PIC_CMD) & (irqmask >> 8); + writeb(0x0A, rm200_pic_slave + PIC_CMD); + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +void sni_rm200_mask_and_ack_8259A(struct irq_data *d) +{ + unsigned int irqmask, irq = d->irq - RM200_I8259A_IRQ_BASE; + unsigned long flags; + + irqmask = 1 << irq; + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (rm200_cached_irq_mask & irqmask) + goto spurious_8259A_irq; + rm200_cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + readb(rm200_pic_slave + PIC_IMR); + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + writeb(0x60+(irq & 7), rm200_pic_slave + PIC_CMD); + writeb(0x60+PIC_CASCADE_IR, rm200_pic_master + PIC_CMD); + } else { + readb(rm200_pic_master + PIC_IMR); + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + writeb(0x60+irq, rm200_pic_master + PIC_CMD); + } + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (sni_rm200_i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { + printk(KERN_DEBUG + "spurious RM200 8259A interrupt: IRQ%d.\n", irq); + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static struct irq_chip sni_rm200_i8259A_chip = { + .name = "RM200-XT-PIC", + .irq_mask = sni_rm200_disable_8259A_irq, + .irq_unmask = sni_rm200_enable_8259A_irq, + .irq_mask_ack = sni_rm200_mask_and_ack_8259A, +}; + +/* + * Do the traditional i8259 interrupt polling thing. This is for the few + * cases where no better interrupt acknowledge method is available and we + * absolutely must touch the i8259. + */ +static inline int sni_rm200_i8259_irq(void) +{ + int irq; + + raw_spin_lock(&sni_rm200_i8259A_lock); + + /* Perform an interrupt acknowledge cycle on controller 1. */ + writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */ + irq = readb(rm200_pic_master + PIC_CMD) & 7; + if (irq == PIC_CASCADE_IR) { + /* + * Interrupt is cascaded so perform interrupt + * acknowledge on controller 2. + */ + writeb(0x0C, rm200_pic_slave + PIC_CMD); /* prepare for poll */ + irq = (readb(rm200_pic_slave + PIC_CMD) & 7) + 8; + } + + if (unlikely(irq == 7)) { + /* + * This may be a spurious interrupt. + * + * Read the interrupt status register (ISR). If the most + * significant bit is not set then there is no valid + * interrupt. + */ + writeb(0x0B, rm200_pic_master + PIC_ISR); /* ISR register */ + if (~readb(rm200_pic_master + PIC_ISR) & 0x80) + irq = -1; + } + + raw_spin_unlock(&sni_rm200_i8259A_lock); + + return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq; +} + +void sni_rm200_init_8259A(void) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + + writeb(0xff, rm200_pic_master + PIC_IMR); + writeb(0xff, rm200_pic_slave + PIC_IMR); + + writeb(0x11, rm200_pic_master + PIC_CMD); + writeb(0, rm200_pic_master + PIC_IMR); + writeb(1U << PIC_CASCADE_IR, rm200_pic_master + PIC_IMR); + writeb(MASTER_ICW4_DEFAULT, rm200_pic_master + PIC_IMR); + writeb(0x11, rm200_pic_slave + PIC_CMD); + writeb(8, rm200_pic_slave + PIC_IMR); + writeb(PIC_CASCADE_IR, rm200_pic_slave + PIC_IMR); + writeb(SLAVE_ICW4_DEFAULT, rm200_pic_slave + PIC_IMR); + udelay(100); /* wait for 8259A to initialize */ + + writeb(cached_master_mask, rm200_pic_master + PIC_IMR); + writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); + + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); +} + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction sni_rm200_irq2 = { + .handler = no_action, + .name = "cascade", + .flags = IRQF_NO_THREAD, +}; + +static struct resource sni_rm200_pic1_resource = { + .name = "onboard ISA pic1", + .start = 0x16000020, + .end = 0x16000023, + .flags = IORESOURCE_BUSY +}; + +static struct resource sni_rm200_pic2_resource = { + .name = "onboard ISA pic2", + .start = 0x160000a0, + .end = 0x160000a3, + .flags = IORESOURCE_BUSY +}; + +/* ISA irq handler */ +static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p) +{ + int irq; + + irq = sni_rm200_i8259_irq(); + if (unlikely(irq < 0)) + return IRQ_NONE; + + do_IRQ(irq); + return IRQ_HANDLED; +} + +struct irqaction sni_rm200_i8259A_irq = { + .handler = sni_rm200_i8259A_irq_handler, + .name = "onboard ISA", + .flags = IRQF_SHARED +}; + +void __init sni_rm200_i8259_irqs(void) +{ + int i; + + rm200_pic_master = ioremap_nocache(0x16000020, 4); + if (!rm200_pic_master) + return; + rm200_pic_slave = ioremap_nocache(0x160000a0, 4); + if (!rm200_pic_slave) { + iounmap(rm200_pic_master); + return; + } + + insert_resource(&iomem_resource, &sni_rm200_pic1_resource); + insert_resource(&iomem_resource, &sni_rm200_pic2_resource); + + sni_rm200_init_8259A(); + + for (i = RM200_I8259A_IRQ_BASE; i < RM200_I8259A_IRQ_BASE + 16; i++) + irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip, + handle_level_irq); + + setup_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, &sni_rm200_irq2); +} + + +#define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000) +#define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000) + +#define SNI_RM200_INT_START 24 +#define SNI_RM200_INT_END 28 + +static void enable_rm200_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START); + + *(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask; +} + +void disable_rm200_irq(struct irq_data *d) +{ + unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START); + + *(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask; +} + +static struct irq_chip rm200_irq_type = { + .name = "RM200", + .irq_mask = disable_rm200_irq, + .irq_unmask = enable_rm200_irq, +}; + +static void sni_rm200_hwint(void) +{ + u32 pending = read_c0_cause() & read_c0_status(); + u8 mask; + u8 stat; + int irq; + + if (pending & C_IRQ5) + do_IRQ(MIPS_CPU_IRQ_BASE + 7); + else if (pending & C_IRQ0) { + clear_c0_status(IE_IRQ0); + mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f; + stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14; + irq = ffs(stat & mask & 0x1f); + + if (likely(irq > 0)) + do_IRQ(irq + SNI_RM200_INT_START - 1); + set_c0_status(IE_IRQ0); + } +} + +void __init sni_rm200_irq_init(void) +{ + int i; + + * (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f; + + sni_rm200_i8259_irqs(); + mips_cpu_irq_init(); + /* Actually we've got more interrupts to handle ... */ + for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++) + irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq); + sni_hwint = sni_rm200_hwint; + change_c0_status(ST0_IM, IE_IRQ0); + setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq); + setup_irq(SNI_RM200_INT_START + 1, &sni_isa_irq); +} + +void __init sni_rm200_init(void) +{ +} diff --git a/kernel/arch/mips/sni/setup.c b/kernel/arch/mips/sni/setup.c new file mode 100644 index 000000000..efad85c8c --- /dev/null +++ b/kernel/arch/mips/sni/setup.c @@ -0,0 +1,263 @@ +/* + * Setup pointers to hardware-dependent routines. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de) + */ +#include <linux/eisa.h> +#include <linux/init.h> +#include <linux/export.h> +#include <linux/console.h> +#include <linux/fb.h> +#include <linux/screen_info.h> + +#ifdef CONFIG_FW_ARC +#include <asm/fw/arc/types.h> +#include <asm/sgialib.h> +#endif + +#ifdef CONFIG_FW_SNIPROM +#include <asm/mipsprom.h> +#endif + +#include <asm/bootinfo.h> +#include <asm/cpu.h> +#include <asm/io.h> +#include <asm/reboot.h> +#include <asm/sni.h> + +unsigned int sni_brd_type; +EXPORT_SYMBOL(sni_brd_type); + +extern void sni_machine_restart(char *command); +extern void sni_machine_power_off(void); + +static void __init sni_display_setup(void) +{ +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_FW_ARC) + struct screen_info *si = &screen_info; + DISPLAY_STATUS *di; + + di = ArcGetDisplayStatus(1); + + if (di) { + si->orig_x = di->CursorXPosition; + si->orig_y = di->CursorYPosition; + si->orig_video_cols = di->CursorMaxXPosition; + si->orig_video_lines = di->CursorMaxYPosition; + si->orig_video_isVGA = VIDEO_TYPE_VGAC; + si->orig_video_points = 16; + } +#endif +} + +static void __init sni_console_setup(void) +{ +#ifndef CONFIG_FW_ARC + char *ctype; + char *cdev; + char *baud; + int port; + static char options[8] __initdata; + + cdev = prom_getenv("console_dev"); + if (strncmp(cdev, "tty", 3) == 0) { + ctype = prom_getenv("console"); + switch (*ctype) { + default: + case 'l': + port = 0; + baud = prom_getenv("lbaud"); + break; + case 'r': + port = 1; + baud = prom_getenv("rbaud"); + break; + } + if (baud) + strcpy(options, baud); + if (strncmp(cdev, "tty552", 6) == 0) + add_preferred_console("ttyS", port, + baud ? options : NULL); + else + add_preferred_console("ttySC", port, + baud ? options : NULL); + } +#endif +} + +#ifdef DEBUG +static void __init sni_idprom_dump(void) +{ + int i; + + pr_debug("SNI IDProm dump:\n"); + for (i = 0; i < 256; i++) { + if (i%16 == 0) + pr_debug("%04x ", i); + + printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i)); + + if (i % 16 == 15) + printk("\n"); + } +} +#endif + +void __init plat_mem_setup(void) +{ + int cputype; + + set_io_port_base(SNI_PORT_BASE); +// ioport_resource.end = sni_io_resource.end; + + /* + * Setup (E)ISA I/O memory access stuff + */ +#ifdef CONFIG_EISA + EISA_bus = 1; +#endif + + sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE; + cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE; + switch (sni_brd_type) { + case SNI_BRD_TOWER_OASIC: + switch (cputype) { + case SNI_CPU_M8030: + system_type = "RM400-330"; + break; + case SNI_CPU_M8031: + system_type = "RM400-430"; + break; + case SNI_CPU_M8037: + system_type = "RM400-530"; + break; + case SNI_CPU_M8034: + system_type = "RM400-730"; + break; + default: + system_type = "RM400-xxx"; + break; + } + break; + case SNI_BRD_MINITOWER: + switch (cputype) { + case SNI_CPU_M8021: + case SNI_CPU_M8043: + system_type = "RM400-120"; + break; + case SNI_CPU_M8040: + system_type = "RM400-220"; + break; + case SNI_CPU_M8053: + system_type = "RM400-225"; + break; + case SNI_CPU_M8050: + system_type = "RM400-420"; + break; + default: + system_type = "RM400-xxx"; + break; + } + break; + case SNI_BRD_PCI_TOWER: + system_type = "RM400-Cxx"; + break; + case SNI_BRD_RM200: + system_type = "RM200-xxx"; + break; + case SNI_BRD_PCI_MTOWER: + system_type = "RM300-Cxx"; + break; + case SNI_BRD_PCI_DESKTOP: + switch (read_c0_prid() & PRID_IMP_MASK) { + case PRID_IMP_R4600: + case PRID_IMP_R4700: + system_type = "RM200-C20"; + break; + case PRID_IMP_R5000: + system_type = "RM200-C40"; + break; + default: + system_type = "RM200-Cxx"; + break; + } + break; + case SNI_BRD_PCI_TOWER_CPLUS: + system_type = "RM400-Exx"; + break; + case SNI_BRD_PCI_MTOWER_CPLUS: + system_type = "RM300-Exx"; + break; + } + pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type, system_type); + +#ifdef DEBUG + sni_idprom_dump(); +#endif + + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_init(); + break; + + case SNI_BRD_PCI_TOWER: + case SNI_BRD_PCI_TOWER_CPLUS: + sni_pcit_init(); + break; + + case SNI_BRD_RM200: + sni_rm200_init(); + break; + + case SNI_BRD_PCI_MTOWER: + case SNI_BRD_PCI_DESKTOP: + case SNI_BRD_PCI_MTOWER_CPLUS: + sni_pcimt_init(); + break; + } + + _machine_restart = sni_machine_restart; + pm_power_off = sni_machine_power_off; + + sni_display_setup(); + sni_console_setup(); +} + +#ifdef CONFIG_PCI + +#include <linux/pci.h> +#include <video/vga.h> +#include <video/cirrus.h> + +static void quirk_cirrus_ram_size(struct pci_dev *dev) +{ + u16 cmd; + + /* + * firmware doesn't set the ram size correct, so we + * need to do it here, otherwise we get screen corruption + * on older Cirrus chips + */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if ((cmd & (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) + == (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) { + vga_wseq(NULL, CL_SEQR6, 0x12); /* unlock all extension registers */ + vga_wseq(NULL, CL_SEQRF, 0x18); + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5434_8, + quirk_cirrus_ram_size); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5436, + quirk_cirrus_ram_size); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, + quirk_cirrus_ram_size); +#endif diff --git a/kernel/arch/mips/sni/time.c b/kernel/arch/mips/sni/time.c new file mode 100644 index 000000000..cf8ec568b --- /dev/null +++ b/kernel/arch/mips/sni/time.c @@ -0,0 +1,190 @@ +#include <linux/types.h> +#include <linux/i8253.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/smp.h> +#include <linux/time.h> +#include <linux/clockchips.h> + +#include <asm/sni.h> +#include <asm/time.h> +#include <asm-generic/rtc.h> + +#define SNI_CLOCK_TICK_RATE 3686400 +#define SNI_COUNTER2_DIV 64 +#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) + +static void a20r_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8; + wmb(); + + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV; + wmb(); + *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8; + wmb(); + + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device a20r_clockevent_device = { + .name = "a20r-timer", + .features = CLOCK_EVT_FEAT_PERIODIC, + + /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */ + + .rating = 300, + .irq = SNI_A20R_IRQ_TIMER, + .set_mode = a20r_set_mode, +}; + +static irqreturn_t a20r_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *cd = dev_id; + + *(volatile u8 *)A20R_PT_TIM0_ACK = 0; + wmb(); + + cd->event_handler(cd); + + return IRQ_HANDLED; +} + +static struct irqaction a20r_irqaction = { + .handler = a20r_interrupt, + .flags = IRQF_PERCPU | IRQF_TIMER, + .name = "a20r-timer", +}; + +/* + * a20r platform uses 2 counters to divide the input frequency. + * Counter 2 output is connected to Counter 0 & 1 input. + */ +static void __init sni_a20r_timer_setup(void) +{ + struct clock_event_device *cd = &a20r_clockevent_device; + struct irqaction *action = &a20r_irqaction; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevents_register_device(cd); + action->dev_id = cd; + setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction); +} + +#define SNI_8254_TICK_RATE 1193182UL + +#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255) + +static __init unsigned long dosample(void) +{ + u32 ct0, ct1; + volatile u8 msb; + + /* Start the counter. */ + outb_p(0x34, 0x43); + outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40); + outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40); + + /* Get initial counter invariant */ + ct0 = read_c0_count(); + + /* Latch and spin until top byte of counter0 is zero */ + do { + outb(0x00, 0x43); + (void) inb(0x40); + msb = inb(0x40); + ct1 = read_c0_count(); + } while (msb); + + /* Stop the counter. */ + outb(0x38, 0x43); + /* + * Return the difference, this is how far the r4k counter increments + * for every 1/HZ seconds. We round off the nearest 1 MHz of master + * clock (= 1000000 / HZ / 2). + */ + /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ + return (ct1 - ct0) / (500000/HZ) * (500000/HZ); +} + +/* + * Here we need to calibrate the cycle counter to at least be close. + */ +void __init plat_time_init(void) +{ + unsigned long r4k_ticks[3]; + unsigned long r4k_tick; + + /* + * Figure out the r4k offset, the algorithm is very simple and works in + * _all_ cases as long as the 8254 counter register itself works ok (as + * an interrupt driving timer it does not because of bug, this is why + * we are using the onchip r4k counter/compare register to serve this + * purpose, but for r4k_offset calculation it will work ok for us). + * There are other very complicated ways of performing this calculation + * but this one works just fine so I am not going to futz around. ;-) + */ + printk(KERN_INFO "Calibrating system timer... "); + dosample(); /* Prime cache. */ + dosample(); /* Prime cache. */ + /* Zero is NOT an option. */ + do { + r4k_ticks[0] = dosample(); + } while (!r4k_ticks[0]); + do { + r4k_ticks[1] = dosample(); + } while (!r4k_ticks[1]); + + if (r4k_ticks[0] != r4k_ticks[1]) { + printk("warning: timer counts differ, retrying... "); + r4k_ticks[2] = dosample(); + if (r4k_ticks[2] == r4k_ticks[0] + || r4k_ticks[2] == r4k_ticks[1]) + r4k_tick = r4k_ticks[2]; + else { + printk("disagreement, using average... "); + r4k_tick = (r4k_ticks[0] + r4k_ticks[1] + + r4k_ticks[2]) / 3; + } + } else + r4k_tick = r4k_ticks[0]; + + printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick, + (int) (r4k_tick / (500000 / HZ)), + (int) (r4k_tick % (500000 / HZ))); + + mips_hpt_frequency = r4k_tick * HZ; + + switch (sni_brd_type) { + case SNI_BRD_10: + case SNI_BRD_10NEW: + case SNI_BRD_TOWER_OASIC: + case SNI_BRD_MINITOWER: + sni_a20r_timer_setup(); + break; + } + setup_pit_timer(); +} + +void read_persistent_clock(struct timespec *ts) +{ + ts->tv_sec = -1; + ts->tv_nsec = 0; +} |