summaryrefslogtreecommitdiffstats
path: root/kernel/arch/mips/ralink/mt7620.c
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/mips/ralink/mt7620.c
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/mips/ralink/mt7620.c')
-rw-r--r--kernel/arch/mips/ralink/mt7620.c63
1 files changed, 50 insertions, 13 deletions
diff --git a/kernel/arch/mips/ralink/mt7620.c b/kernel/arch/mips/ralink/mt7620.c
index 2ea5ff6dc..dfb04fced 100644
--- a/kernel/arch/mips/ralink/mt7620.c
+++ b/kernel/arch/mips/ralink/mt7620.c
@@ -37,8 +37,17 @@
#define PMU1_CFG 0x8C
#define DIG_SW_SEL BIT(25)
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK 0x1f00
+#define CLKCFG_FDIV_USB_VAL 0x0300
+#define CLKCFG_FFRAC_MASK 0x001f
+#define CLKCFG_FFRAC_USB_VAL 0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688 0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK 0x1
/* does the board have sdram or ddram */
static int dram_type;
@@ -227,6 +236,12 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
{ 0 }
};
+static inline int is_mt76x8(void)
+{
+ return ralink_soc == MT762X_SOC_MT7628AN ||
+ ralink_soc == MT762X_SOC_MT7688;
+}
+
static __init u32
mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
{
@@ -381,7 +396,7 @@ void __init ralink_clk_init(void)
#define RINT(x) ((x) / 1000000)
#define RFRAC(x) (((x) / 1000) % 1000)
- if (mt762x_soc == MT762X_SOC_MT7628AN) {
+ if (is_mt76x8()) {
if (xtal_rate == MHZ(40))
cpu_rate = MHZ(580);
else
@@ -423,6 +438,20 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate);
ralink_clk_add("10180000.wmac", xtal_rate);
+
+ if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be
+ * too low for USB to function properly. Adjust the busses
+ * fractional divider to fix this
+ */
+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+ }
}
void __init ralink_of_remap(void)
@@ -499,20 +528,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
if (bga) {
- mt762x_soc = MT762X_SOC_MT7620A;
+ ralink_soc = MT762X_SOC_MT7620A;
name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc";
} else {
- mt762x_soc = MT762X_SOC_MT7620N;
+ ralink_soc = MT762X_SOC_MT7620N;
name = "MT7620N";
soc_info->compatible = "ralink,mt7620n-soc";
-#ifdef CONFIG_PCI
- panic("mt7620n is only supported for non pci kernels");
-#endif
}
} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- mt762x_soc = MT762X_SOC_MT7628AN;
- name = "MT7628AN";
+ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+ if (efuse & EFUSE_MT7688) {
+ ralink_soc = MT762X_SOC_MT7688;
+ name = "MT7688";
+ } else {
+ ralink_soc = MT762X_SOC_MT7628AN;
+ name = "MT7628AN";
+ }
soc_info->compatible = "ralink,mt7628an-soc";
} else {
panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
@@ -525,10 +558,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
(rev & CHIP_REV_ECO_MASK));
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+ if (is_mt76x8())
+ dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+ else
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+ SYSCFG0_DRAM_TYPE_MASK;
soc_info->mem_base = MT7620_DRAM_BASE;
- if (mt762x_soc == MT762X_SOC_MT7628AN)
+ if (is_mt76x8())
mt7628_dram_init(soc_info);
else
mt7620_dram_init(soc_info);
@@ -541,7 +578,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
pr_info("Digital PMU set to %s control\n",
(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
- if (mt762x_soc == MT762X_SOC_MT7628AN)
+ if (is_mt76x8())
rt2880_pinmux_data = mt7628an_pinmux_data;
else
rt2880_pinmux_data = mt7620a_pinmux_data;