Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

7 files changed, 1264 insertions, 0 deletions

diff --git a/kernel/arch/mips/netlogic/xlr/Makefile b/kernel/arch/mips/netlogic/xlr/Makefile
new file mode 100644
index 000000000..05902bc6f
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/Makefile
@@ -0,0 +1,2 @@
+obj-y			+=  fmn.o fmn-config.o setup.o platform.o platform-flash.o
+obj-$(CONFIG_SMP)	+= wakeup.o
diff --git a/kernel/arch/mips/netlogic/xlr/fmn-config.c b/kernel/arch/mips/netlogic/xlr/fmn-config.c
new file mode 100644
index 000000000..c7622c6e5
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/fmn-config.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm/cpu-info.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/netlogic/xlr/fmn.h>
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+
+struct xlr_board_fmn_config xlr_board_fmn_config;
+
+static void __maybe_unused print_credit_config(struct xlr_fmn_info *fmn_info)
+{
+	int bkt;
+
+	pr_info("Bucket size :\n");
+	pr_info("Station\t: Size\n");
+	for (bkt = 0; bkt < 16; bkt++)
+		pr_info(" %d  %d  %d  %d  %d  %d  %d %d\n",
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 0],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 1],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 2],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 3],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 4],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 5],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 6],
+			xlr_board_fmn_config.bucket_size[(bkt * 8) + 7]);
+	pr_info("\n");
+
+	pr_info("Credits distribution :\n");
+	pr_info("Station\t: Size\n");
+	for (bkt = 0; bkt < 16; bkt++)
+		pr_info(" %d  %d  %d  %d  %d  %d  %d %d\n",
+			fmn_info->credit_config[(bkt * 8) + 0],
+			fmn_info->credit_config[(bkt * 8) + 1],
+			fmn_info->credit_config[(bkt * 8) + 2],
+			fmn_info->credit_config[(bkt * 8) + 3],
+			fmn_info->credit_config[(bkt * 8) + 4],
+			fmn_info->credit_config[(bkt * 8) + 5],
+			fmn_info->credit_config[(bkt * 8) + 6],
+			fmn_info->credit_config[(bkt * 8) + 7]);
+	pr_info("\n");
+}
+
+static void check_credit_distribution(void)
+{
+	struct xlr_board_fmn_config *cfg = &xlr_board_fmn_config;
+	int bkt, n, total_credits, ncores;
+
+	ncores = hweight32(nlm_current_node()->coremask);
+	for (bkt = 0; bkt < 128; bkt++) {
+		total_credits = 0;
+		for (n = 0; n < ncores; n++)
+			total_credits += cfg->cpu[n].credit_config[bkt];
+		total_credits += cfg->gmac[0].credit_config[bkt];
+		total_credits += cfg->gmac[1].credit_config[bkt];
+		total_credits += cfg->dma.credit_config[bkt];
+		total_credits += cfg->cmp.credit_config[bkt];
+		total_credits += cfg->sae.credit_config[bkt];
+		total_credits += cfg->xgmac[0].credit_config[bkt];
+		total_credits += cfg->xgmac[1].credit_config[bkt];
+		if (total_credits > cfg->bucket_size[bkt])
+			pr_err("ERROR: Bucket %d: credits (%d) > size (%d)\n",
+				bkt, total_credits, cfg->bucket_size[bkt]);
+	}
+	pr_info("Credit distribution complete.\n");
+}
+
+/**
+ * Configure bucket size and credits for a device. 'size' is the size of
+ * the buckets for the device. This size is distributed among all the CPUs
+ * so that all of them can send messages to the device.
+ *
+ * The device is also given 'cpu_credits' to send messages to the CPUs
+ *
+ * @dev_info: FMN information structure for each devices
+ * @start_stn_id: Starting station id of dev_info
+ * @end_stn_id: End station id of dev_info
+ * @num_buckets: Total number of buckets for den_info
+ * @cpu_credits: Allowed credits to cpu for each devices pointing by dev_info
+ * @size: Size of the each buckets in the device station
+ */
+static void setup_fmn_cc(struct xlr_fmn_info *dev_info, int start_stn_id,
+		int end_stn_id, int num_buckets, int cpu_credits, int size)
+{
+	int i, j, num_core, n, credits_per_cpu;
+	struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu;
+
+	num_core = hweight32(nlm_current_node()->coremask);
+	dev_info->num_buckets	= num_buckets;
+	dev_info->start_stn_id	= start_stn_id;
+	dev_info->end_stn_id	= end_stn_id;
+
+	n = num_core;
+	if (num_core == 3)
+		n = 4;
+
+	for (i = start_stn_id; i <= end_stn_id; i++) {
+		xlr_board_fmn_config.bucket_size[i] = size;
+
+		/* Dividing device credits equally to cpus */
+		credits_per_cpu = size / n;
+		for (j = 0; j < num_core; j++)
+			cpu[j].credit_config[i] = credits_per_cpu;
+
+		/* credits left to distribute */
+		credits_per_cpu = size - (credits_per_cpu * num_core);
+
+		/* distribute the remaining credits (if any), among cores */
+		for (j = 0; (j < num_core) && (credits_per_cpu >= 4); j++) {
+			cpu[j].credit_config[i] += 4;
+			credits_per_cpu -= 4;
+		}
+	}
+
+	/* Distributing cpu per bucket credits to devices */
+	for (i = 0; i < num_core; i++) {
+		for (j = 0; j < FMN_CORE_NBUCKETS; j++)
+			dev_info->credit_config[(i * 8) + j] = cpu_credits;
+	}
+}
+
+/*
+ * Each core has 256 slots and 8 buckets,
+ * Configure the 8 buckets each with 32 slots
+ */
+static void setup_cpu_fmninfo(struct xlr_fmn_info *cpu, int num_core)
+{
+	int i, j;
+
+	for (i = 0; i < num_core; i++) {
+		cpu[i].start_stn_id	= (8 * i);
+		cpu[i].end_stn_id	= (8 * i + 8);
+
+		for (j = cpu[i].start_stn_id; j < cpu[i].end_stn_id; j++)
+			xlr_board_fmn_config.bucket_size[j] = 32;
+	}
+}
+
+/**
+ * Setup the FMN details for each devices according to the device available
+ * in each variant of XLR/XLS processor
+ */
+void xlr_board_info_setup(void)
+{
+	struct xlr_fmn_info *cpu = xlr_board_fmn_config.cpu;
+	struct xlr_fmn_info *gmac = xlr_board_fmn_config.gmac;
+	struct xlr_fmn_info *xgmac = xlr_board_fmn_config.xgmac;
+	struct xlr_fmn_info *dma = &xlr_board_fmn_config.dma;
+	struct xlr_fmn_info *cmp = &xlr_board_fmn_config.cmp;
+	struct xlr_fmn_info *sae = &xlr_board_fmn_config.sae;
+	int processor_id, num_core;
+
+	num_core = hweight32(nlm_current_node()->coremask);
+	processor_id = read_c0_prid() & PRID_IMP_MASK;
+
+	setup_cpu_fmninfo(cpu, num_core);
+	switch (processor_id) {
+	case PRID_IMP_NETLOGIC_XLS104:
+	case PRID_IMP_NETLOGIC_XLS108:
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 16, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 8, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 8, 128);
+		break;
+
+	case PRID_IMP_NETLOGIC_XLS204:
+	case PRID_IMP_NETLOGIC_XLS208:
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 16, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 8, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 8, 128);
+		break;
+
+	case PRID_IMP_NETLOGIC_XLS404:
+	case PRID_IMP_NETLOGIC_XLS408:
+	case PRID_IMP_NETLOGIC_XLS404B:
+	case PRID_IMP_NETLOGIC_XLS408B:
+	case PRID_IMP_NETLOGIC_XLS416B:
+	case PRID_IMP_NETLOGIC_XLS608B:
+	case PRID_IMP_NETLOGIC_XLS616B:
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 8, 32);
+		setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
+					FMN_STNID_GMAC1_TX3, 8, 8, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 4, 64);
+		setup_fmn_cc(cmp, FMN_STNID_CMP_0,
+					FMN_STNID_CMP_3, 4, 4, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 8, 128);
+		break;
+
+	case PRID_IMP_NETLOGIC_XLS412B:
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 8, 32);
+		setup_fmn_cc(&gmac[1], FMN_STNID_GMAC1_FR_0,
+					FMN_STNID_GMAC1_TX3, 8, 8, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 4, 64);
+		setup_fmn_cc(cmp, FMN_STNID_CMP_0,
+					FMN_STNID_CMP_3, 4, 4, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 8, 128);
+		break;
+
+	case PRID_IMP_NETLOGIC_XLR308:
+	case PRID_IMP_NETLOGIC_XLR308C:
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 16, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 8, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 4, 128);
+		break;
+
+	case PRID_IMP_NETLOGIC_XLR532:
+	case PRID_IMP_NETLOGIC_XLR532C:
+	case PRID_IMP_NETLOGIC_XLR516C:
+	case PRID_IMP_NETLOGIC_XLR508C:
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 16, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 8, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 4, 128);
+		break;
+
+	case PRID_IMP_NETLOGIC_XLR732:
+	case PRID_IMP_NETLOGIC_XLR716:
+		setup_fmn_cc(&xgmac[0], FMN_STNID_XMAC0_00_TX,
+					FMN_STNID_XMAC0_15_TX, 8, 0, 32);
+		setup_fmn_cc(&xgmac[1], FMN_STNID_XMAC1_00_TX,
+					FMN_STNID_XMAC1_15_TX, 8, 0, 32);
+		setup_fmn_cc(&gmac[0], FMN_STNID_GMAC0,
+					FMN_STNID_GMAC0_TX3, 8, 24, 32);
+		setup_fmn_cc(dma, FMN_STNID_DMA_0,
+					FMN_STNID_DMA_3, 4, 4, 64);
+		setup_fmn_cc(sae, FMN_STNID_SEC0,
+					FMN_STNID_SEC1, 2, 4, 128);
+		break;
+	default:
+		pr_err("Unknown CPU with processor ID [%d]\n", processor_id);
+		pr_err("Error: Cannot initialize FMN credits.\n");
+	}
+
+	check_credit_distribution();
+
+#if 0 /* debug */
+	print_credit_config(&cpu[0]);
+	print_credit_config(&gmac[0]);
+#endif
+}
diff --git a/kernel/arch/mips/netlogic/xlr/fmn.c b/kernel/arch/mips/netlogic/xlr/fmn.c
new file mode 100644
index 000000000..d428e8471
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/fmn.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irqreturn.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/mipsregs.h>
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/xlr/fmn.h>
+#include <asm/netlogic/common.h>
+
+#define COP2_CC_INIT_CPU_DEST(dest, conf) \
+do { \
+	nlm_write_c2_cc##dest(0, conf[(dest * 8) + 0]); \
+	nlm_write_c2_cc##dest(1, conf[(dest * 8) + 1]); \
+	nlm_write_c2_cc##dest(2, conf[(dest * 8) + 2]); \
+	nlm_write_c2_cc##dest(3, conf[(dest * 8) + 3]); \
+	nlm_write_c2_cc##dest(4, conf[(dest * 8) + 4]); \
+	nlm_write_c2_cc##dest(5, conf[(dest * 8) + 5]); \
+	nlm_write_c2_cc##dest(6, conf[(dest * 8) + 6]); \
+	nlm_write_c2_cc##dest(7, conf[(dest * 8) + 7]); \
+} while (0)
+
+struct fmn_message_handler {
+	void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *);
+	void *arg;
+} msg_handlers[128];
+
+/*
+ * FMN interrupt handler. We configure the FMN so that any messages in
+ * any of the CPU buckets will trigger an interrupt on the CPU.
+ * The message can be from any device on the FMN (like NAE/SAE/DMA).
+ * The source station id is used to figure out which of the registered
+ * handlers have to be called.
+ */
+static irqreturn_t fmn_message_handler(int irq, void *data)
+{
+	struct fmn_message_handler *hndlr;
+	int bucket, rv;
+	int size = 0, code = 0, src_stnid = 0;
+	struct nlm_fmn_msg msg;
+	uint32_t mflags, bkt_status;
+
+	mflags = nlm_cop2_enable_irqsave();
+	/* Disable message ring interrupt */
+	nlm_fmn_setup_intr(irq, 0);
+	while (1) {
+		/* 8 bkts per core, [24:31] each bit represents one bucket
+		 * Bit is Zero if bucket is not empty */
+		bkt_status = (nlm_read_c2_status0() >> 24) & 0xff;
+		if (bkt_status == 0xff)
+			break;
+		for (bucket = 0; bucket < 8; bucket++) {
+			/* Continue on empty bucket */
+			if (bkt_status & (1 << bucket))
+				continue;
+			rv = nlm_fmn_receive(bucket, &size, &code, &src_stnid,
+						&msg);
+			if (rv != 0)
+				continue;
+
+			hndlr = &msg_handlers[src_stnid];
+			if (hndlr->action == NULL)
+				pr_warn("No msgring handler for stnid %d\n",
+						src_stnid);
+			else {
+				nlm_cop2_disable_irqrestore(mflags);
+				hndlr->action(bucket, src_stnid, size, code,
+					&msg, hndlr->arg);
+				mflags = nlm_cop2_enable_irqsave();
+			}
+		}
+	};
+	/* Enable message ring intr, to any thread in core */
+	nlm_fmn_setup_intr(irq, (1 << nlm_threads_per_core) - 1);
+	nlm_cop2_disable_irqrestore(mflags);
+	return IRQ_HANDLED;
+}
+
+struct irqaction fmn_irqaction = {
+	.handler = fmn_message_handler,
+	.flags = IRQF_PERCPU,
+	.name = "fmn",
+};
+
+void xlr_percpu_fmn_init(void)
+{
+	struct xlr_fmn_info *cpu_fmn_info;
+	int *bucket_sizes;
+	uint32_t flags;
+	int id;
+
+	BUG_ON(nlm_thread_id() != 0);
+	id = nlm_core_id();
+
+	bucket_sizes = xlr_board_fmn_config.bucket_size;
+	cpu_fmn_info = &xlr_board_fmn_config.cpu[id];
+	flags = nlm_cop2_enable_irqsave();
+
+	/* Setup bucket sizes for the core. */
+	nlm_write_c2_bucksize(0, bucket_sizes[id * 8 + 0]);
+	nlm_write_c2_bucksize(1, bucket_sizes[id * 8 + 1]);
+	nlm_write_c2_bucksize(2, bucket_sizes[id * 8 + 2]);
+	nlm_write_c2_bucksize(3, bucket_sizes[id * 8 + 3]);
+	nlm_write_c2_bucksize(4, bucket_sizes[id * 8 + 4]);
+	nlm_write_c2_bucksize(5, bucket_sizes[id * 8 + 5]);
+	nlm_write_c2_bucksize(6, bucket_sizes[id * 8 + 6]);
+	nlm_write_c2_bucksize(7, bucket_sizes[id * 8 + 7]);
+
+	/*
+	 * For sending FMN messages, we need credits on the destination
+	 * bucket. Program the credits this core has on the 128 possible
+	 * destination buckets.
+	 * We cannot use a loop here, because the the first argument has
+	 * to be a constant integer value.
+	 */
+	COP2_CC_INIT_CPU_DEST(0, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(1, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(2, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(3, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(4, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(5, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(6, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(7, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(8, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(9, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(10, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(11, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(12, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(13, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(14, cpu_fmn_info->credit_config);
+	COP2_CC_INIT_CPU_DEST(15, cpu_fmn_info->credit_config);
+
+	/* enable FMN interrupts on this CPU */
+	nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
+	nlm_cop2_disable_irqrestore(flags);
+}
+
+
+/*
+ * Register a FMN message handler with respect to the source station id
+ * @stnid: source station id
+ * @action: Handler function pointer
+ */
+int nlm_register_fmn_handler(int start_stnid, int end_stnid,
+	void (*action)(int, int, int, int, struct nlm_fmn_msg *, void *),
+	void *arg)
+{
+	int sstnid;
+
+	for (sstnid = start_stnid; sstnid <= end_stnid; sstnid++) {
+		msg_handlers[sstnid].arg = arg;
+		smp_wmb();
+		msg_handlers[sstnid].action = action;
+	}
+	pr_debug("Registered FMN msg handler for stnid %d-%d\n",
+			start_stnid, end_stnid);
+	return 0;
+}
+
+void nlm_setup_fmn_irq(void)
+{
+	uint32_t flags;
+
+	/* setup irq only once */
+	setup_irq(IRQ_FMN, &fmn_irqaction);
+
+	flags = nlm_cop2_enable_irqsave();
+	nlm_fmn_setup_intr(IRQ_FMN, (1 << nlm_threads_per_core) - 1);
+	nlm_cop2_disable_irqrestore(flags);
+}
diff --git a/kernel/arch/mips/netlogic/xlr/platform-flash.c b/kernel/arch/mips/netlogic/xlr/platform-flash.c
new file mode 100644
index 000000000..6d3c727e0
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/platform-flash.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/resource.h>
+#include <linux/spi/flash.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/flash.h>
+#include <asm/netlogic/xlr/bridge.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+/*
+ * Default NOR partition layout
+ */
+static struct mtd_partition xlr_nor_parts[] = {
+	{
+		.name = "User FS",
+		.offset = 0x800000,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/*
+ * Default NAND partition layout
+ */
+static struct mtd_partition xlr_nand_parts[] = {
+	{
+		.name	= "Root Filesystem",
+		.offset = 64 * 64 * 2048,
+		.size	= 432 * 64 * 2048,
+	},
+	{
+		.name	= "Home Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+/* Use PHYSMAP flash for NOR */
+struct physmap_flash_data xlr_nor_data = {
+	.width		= 2,
+	.parts		= xlr_nor_parts,
+	.nr_parts	= ARRAY_SIZE(xlr_nor_parts),
+};
+
+static struct resource xlr_nor_res[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device xlr_nor_dev = {
+	.name	= "physmap-flash",
+	.dev	= {
+		.platform_data	= &xlr_nor_data,
+	},
+	.num_resources	= ARRAY_SIZE(xlr_nor_res),
+	.resource	= xlr_nor_res,
+};
+
+const char *xlr_part_probes[] = { "cmdlinepart", NULL };
+
+/*
+ * Use "gen_nand" driver for NAND flash
+ *
+ * There seems to be no way to store a private pointer containing
+ * platform specific info in gen_nand drivier. We will use a global
+ * struct for now, since we currently have only one NAND chip per board.
+ */
+struct xlr_nand_flash_priv {
+	int cs;
+	uint64_t flash_mmio;
+};
+
+static struct xlr_nand_flash_priv nand_priv;
+
+static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
+		unsigned int ctrl)
+{
+	if (ctrl & NAND_CLE)
+		nlm_write_reg(nand_priv.flash_mmio,
+			FLASH_NAND_CLE(nand_priv.cs), cmd);
+	else if (ctrl & NAND_ALE)
+		nlm_write_reg(nand_priv.flash_mmio,
+			FLASH_NAND_ALE(nand_priv.cs), cmd);
+}
+
+struct platform_nand_data xlr_nand_data = {
+	.chip = {
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(xlr_nand_parts),
+		.chip_delay	= 50,
+		.partitions	= xlr_nand_parts,
+		.part_probe_types = xlr_part_probes,
+	},
+	.ctrl = {
+		.cmd_ctrl	= xlr_nand_ctrl,
+	},
+};
+
+static struct resource xlr_nand_res[] = {
+	{
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device xlr_nand_dev = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(xlr_nand_res),
+	.resource	= xlr_nand_res,
+	.dev		= {
+		.platform_data	= &xlr_nand_data,
+	}
+};
+
+/*
+ * XLR/XLS supports upto 8 devices on its FLASH interface. The value in
+ * FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
+ * flash devices.
+ * Under this, each flash device has an offset and size given by the
+ * CSBASE_ADDR and CSBASE_MASK registers for the device.
+ *
+ * The CSBASE_ registers are expected to be setup by the bootloader.
+ */
+static void setup_flash_resource(uint64_t flash_mmio,
+	uint64_t flash_map_base, int cs, struct resource *res)
+{
+	u32 base, mask;
+
+	base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
+	mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
+
+	res->start = flash_map_base + ((unsigned long)base << 16);
+	res->end = res->start + (mask + 1) * 64 * 1024;
+}
+
+static int __init xlr_flash_init(void)
+{
+	uint64_t gpio_mmio, flash_mmio, flash_map_base;
+	u32 gpio_resetcfg, flash_bar;
+	int cs, boot_nand, boot_nor;
+
+	/* Flash address bits 39:24 is in bridge flash BAR */
+	flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
+	flash_map_base = (flash_bar & 0xffff0000) << 8;
+
+	gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+	flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
+
+	/* Get the chip reset config */
+	gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
+
+	/* Check for boot flash type */
+	boot_nor = boot_nand = 0;
+	if (nlm_chip_is_xls()) {
+		/* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
+		if (gpio_resetcfg & (1 << 16))
+			boot_nand = 1;
+
+		/* check boot from PCMCIA, (GPIO reset reg bit 15 */
+		if ((gpio_resetcfg & (1 << 15)) == 0)
+			boot_nor = 1;	/* not set, booted from NOR */
+	} else { /* XLR */
+		/* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
+		if ((gpio_resetcfg & (1 << 16)) == 0)
+			boot_nor = 1;	/* not set, booted from NOR */
+	}
+
+	/* boot flash at chip select 0 */
+	cs = 0;
+
+	if (boot_nand) {
+		nand_priv.cs = cs;
+		nand_priv.flash_mmio = flash_mmio;
+		setup_flash_resource(flash_mmio, flash_map_base, cs,
+			 xlr_nand_res);
+
+		/* Initialize NAND flash at CS 0 */
+		nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
+				FLASH_NAND_CSDEV_PARAM);
+		nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
+				FLASH_NAND_CSTIME_PARAMA);
+		nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
+				FLASH_NAND_CSTIME_PARAMB);
+
+		pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
+		return platform_device_register(&xlr_nand_dev);
+	}
+
+	if (boot_nor) {
+		setup_flash_resource(flash_mmio, flash_map_base, cs,
+			xlr_nor_res);
+		pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
+		return platform_device_register(&xlr_nor_dev);
+	}
+	return 0;
+}
+
+arch_initcall(xlr_flash_init);
diff --git a/kernel/arch/mips/netlogic/xlr/platform.c b/kernel/arch/mips/netlogic/xlr/platform.c
new file mode 100644
index 000000000..4785932af
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/platform.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright 2011, Netlogic Microsystems.
+ * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/resource.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/i2c.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/xlr.h>
+
+static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+{
+	uint64_t uartbase;
+	unsigned int value;
+
+	/* sign extend to 64 bits, if needed */
+	uartbase = (uint64_t)(long)p->membase;
+	value = nlm_read_reg(uartbase, offset);
+
+	/* See XLR/XLS errata */
+	if (offset == UART_MSR)
+		value ^= 0xF0;
+	else if (offset == UART_MCR)
+		value ^= 0x3;
+
+	return value;
+}
+
+static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+{
+	uint64_t uartbase;
+
+	/* sign extend to 64 bits, if needed */
+	uartbase = (uint64_t)(long)p->membase;
+
+	/* See XLR/XLS errata */
+	if (offset == UART_MSR)
+		value ^= 0xF0;
+	else if (offset == UART_MCR)
+		value ^= 0x3;
+
+	nlm_write_reg(uartbase, offset, value);
+}
+
+#define PORT(_irq)					\
+	{						\
+		.irq		= _irq,			\
+		.regshift	= 2,			\
+		.iotype		= UPIO_MEM32,		\
+		.flags		= (UPF_SKIP_TEST |	\
+			 UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
+		.uartclk	= PIC_CLK_HZ,		\
+		.type		= PORT_16550A,		\
+		.serial_in	= nlm_xlr_uart_in,	\
+		.serial_out	= nlm_xlr_uart_out,	\
+	}
+
+static struct plat_serial8250_port xlr_uart_data[] = {
+	PORT(PIC_UART_0_IRQ),
+	PORT(PIC_UART_1_IRQ),
+	{},
+};
+
+static struct platform_device uart_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev = {
+		.platform_data = xlr_uart_data,
+	},
+};
+
+static int __init nlm_uart_init(void)
+{
+	unsigned long uartbase;
+
+	uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
+	xlr_uart_data[0].membase = (void __iomem *)uartbase;
+	xlr_uart_data[0].mapbase = CPHYSADDR(uartbase);
+
+	uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET);
+	xlr_uart_data[1].membase = (void __iomem *)uartbase;
+	xlr_uart_data[1].mapbase = CPHYSADDR(uartbase);
+
+	return platform_device_register(&uart_device);
+}
+
+arch_initcall(nlm_uart_init);
+
+#ifdef CONFIG_USB
+/* Platform USB devices, only on XLS chips */
+static u64 xls_usb_dmamask = ~(u32)0;
+#define USB_PLATFORM_DEV(n, i, irq)					\
+	{								\
+		.name		= n,					\
+		.id		= i,					\
+		.num_resources	= 2,					\
+		.dev		= {					\
+			.dma_mask	= &xls_usb_dmamask,		\
+			.coherent_dma_mask = 0xffffffff,		\
+		},							\
+		.resource	= (struct resource[]) {			\
+			{						\
+				.flags = IORESOURCE_MEM,		\
+			},						\
+			{						\
+				.start	= irq,				\
+				.end	= irq,				\
+				.flags = IORESOURCE_IRQ,		\
+			},						\
+		},							\
+	}
+
+static struct usb_ehci_pdata xls_usb_ehci_pdata = {
+	.caps_offset	= 0,
+};
+
+static struct usb_ohci_pdata xls_usb_ohci_pdata;
+
+static struct platform_device xls_usb_ehci_device =
+			 USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_0 =
+			 USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
+static struct platform_device xls_usb_ohci_device_1 =
+			 USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
+
+static struct platform_device *xls_platform_devices[] = {
+	&xls_usb_ehci_device,
+	&xls_usb_ohci_device_0,
+	&xls_usb_ohci_device_1,
+};
+
+int xls_platform_usb_init(void)
+{
+	uint64_t usb_mmio, gpio_mmio;
+	unsigned long memres;
+	uint32_t val;
+
+	if (!nlm_chip_is_xls())
+		return 0;
+
+	gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+	usb_mmio  = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
+
+	/* Clear Rogue Phy INTs */
+	nlm_write_reg(usb_mmio, 49, 0x10000000);
+	/* Enable all interrupts */
+	nlm_write_reg(usb_mmio, 50, 0x1f000000);
+
+	/* Enable ports */
+	nlm_write_reg(usb_mmio,	 1, 0x07000500);
+
+	val = nlm_read_reg(gpio_mmio, 21);
+	if (((val >> 22) & 0x01) == 0) {
+		pr_info("Detected USB Device mode - Not supported!\n");
+		nlm_write_reg(usb_mmio,	 0, 0x01000000);
+		return 0;
+	}
+
+	pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
+	/* Clear reset, host mode */
+	nlm_write_reg(usb_mmio,	 0, 0x02000000);
+
+	/* Memory resource for various XLS usb ports */
+	usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
+	memres = CPHYSADDR((unsigned long)usb_mmio);
+	xls_usb_ehci_device.resource[0].start = memres;
+	xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
+
+	memres += 0x400;
+	xls_usb_ohci_device_0.resource[0].start = memres;
+	xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
+
+	memres += 0x400;
+	xls_usb_ohci_device_1.resource[0].start = memres;
+	xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
+
+	return platform_add_devices(xls_platform_devices,
+				ARRAY_SIZE(xls_platform_devices));
+}
+
+arch_initcall(xls_platform_usb_init);
+#endif
+
+#ifdef CONFIG_I2C
+static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
+	/* All XLR boards have this RTC and Max6657 Temp Chip */
+	[0] = {
+		.type	= "ds1374",
+		.addr	= 0x68
+	},
+	[1] = {
+		.type	= "lm90",
+		.addr	= 0x4c
+	},
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= 0,	/* filled at init */
+		.end	= 0,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device nlm_xlr_i2c_1 = {
+	.name		= "xlr-i2cbus",
+	.id		= 1,
+	.num_resources	= 1,
+	.resource	= i2c_resources,
+};
+
+static int __init nlm_i2c_init(void)
+{
+	int err = 0;
+	unsigned int offset;
+
+	/* I2C bus 0 does not have any useful devices, configure only bus 1 */
+	offset = NETLOGIC_IO_I2C_1_OFFSET;
+	nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
+	nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
+
+	platform_device_register(&nlm_xlr_i2c_1);
+
+	err = i2c_register_board_info(1, nlm_i2c_board_info1,
+				ARRAY_SIZE(nlm_i2c_board_info1));
+	if (err < 0)
+		pr_err("nlm-i2c: cannot register board I2C devices\n");
+	return err;
+}
+
+arch_initcall(nlm_i2c_init);
+#endif
diff --git a/kernel/arch/mips/netlogic/xlr/setup.c b/kernel/arch/mips/netlogic/xlr/setup.c
new file mode 100644
index 000000000..d118b9aa7
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/setup.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial_8250.h>
+#include <linux/pm.h>
+
+#include <asm/idle.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+
+#include <asm/netlogic/interrupt.h>
+#include <asm/netlogic/psb-bootinfo.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlr/xlr.h>
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+#include <asm/netlogic/xlr/gpio.h>
+#include <asm/netlogic/xlr/fmn.h>
+
+uint64_t nlm_io_base = DEFAULT_NETLOGIC_IO_BASE;
+struct psb_info nlm_prom_info;
+
+/* default to uniprocessor */
+unsigned int  nlm_threads_per_core = 1;
+struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+cpumask_t nlm_cpumask = CPU_MASK_CPU0;
+
+static void nlm_linux_exit(void)
+{
+	uint64_t gpiobase;
+
+	gpiobase = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
+	/* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */
+	nlm_write_reg(gpiobase, GPIO_SWRESET_REG, 1);
+	for ( ; ; )
+		cpu_wait();
+}
+
+void __init plat_mem_setup(void)
+{
+	_machine_restart = (void (*)(char *))nlm_linux_exit;
+	_machine_halt	= nlm_linux_exit;
+	pm_power_off	= nlm_linux_exit;
+}
+
+const char *get_system_type(void)
+{
+	return "Netlogic XLR/XLS Series";
+}
+
+unsigned int nlm_get_cpu_frequency(void)
+{
+	return (unsigned int)nlm_prom_info.cpu_frequency;
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing yet */
+}
+
+void nlm_percpu_init(int hwcpuid)
+{
+	if (hwcpuid % 4 == 0)
+		xlr_percpu_fmn_init();
+}
+
+static void __init build_arcs_cmdline(int *argv)
+{
+	int i, remain, len;
+	char *arg;
+
+	remain = sizeof(arcs_cmdline) - 1;
+	arcs_cmdline[0] = '\0';
+	for (i = 0; argv[i] != 0; i++) {
+		arg = (char *)(long)argv[i];
+		len = strlen(arg);
+		if (len + 1 > remain)
+			break;
+		strcat(arcs_cmdline, arg);
+		strcat(arcs_cmdline, " ");
+		remain -=  len + 1;
+	}
+
+	/* Add the default options here */
+	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+		arg = "console=ttyS0,38400 ";
+		len = strlen(arg);
+		if (len > remain)
+			goto fail;
+		strcat(arcs_cmdline, arg);
+		remain -= len;
+	}
+#ifdef CONFIG_BLK_DEV_INITRD
+	if ((strstr(arcs_cmdline, "rdinit=")) == NULL) {
+		arg = "rdinit=/sbin/init ";
+		len = strlen(arg);
+		if (len > remain)
+			goto fail;
+		strcat(arcs_cmdline, arg);
+		remain -= len;
+	}
+#endif
+	return;
+fail:
+	panic("Cannot add %s, command line too big!", arg);
+}
+
+static void prom_add_memory(void)
+{
+	struct nlm_boot_mem_map *bootm;
+	u64 start, size;
+	u64 pref_backup = 512;	/* avoid pref walking beyond end */
+	int i;
+
+	bootm = (void *)(long)nlm_prom_info.psb_mem_map;
+	for (i = 0; i < bootm->nr_map; i++) {
+		if (bootm->map[i].type != BOOT_MEM_RAM)
+			continue;
+		start = bootm->map[i].addr;
+		size   = bootm->map[i].size;
+
+		/* Work around for using bootloader mem */
+		if (i == 0 && start == 0 && size == 0x0c000000)
+			size = 0x0ff00000;
+
+		add_memory_region(start, size - pref_backup, BOOT_MEM_RAM);
+	}
+}
+
+static void nlm_init_node(void)
+{
+	struct nlm_soc_info *nodep;
+
+	nodep = nlm_current_node();
+	nodep->picbase = nlm_mmio_base(NETLOGIC_IO_PIC_OFFSET);
+	nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+	spin_lock_init(&nodep->piclock);
+}
+
+void __init prom_init(void)
+{
+	int *argv, *envp;		/* passed as 32 bit ptrs */
+	struct psb_info *prom_infop;
+	void *reset_vec;
+#ifdef CONFIG_SMP
+	int i;
+#endif
+
+	/* truncate to 32 bit and sign extend all args */
+	argv = (int *)(long)(int)fw_arg1;
+	envp = (int *)(long)(int)fw_arg2;
+	prom_infop = (struct psb_info *)(long)(int)fw_arg3;
+
+	nlm_prom_info = *prom_infop;
+	nlm_init_node();
+
+	/* Update reset entry point with CPU init code */
+	reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
+	memset(reset_vec, 0, RESET_VEC_SIZE);
+	memcpy(reset_vec, (void *)nlm_reset_entry,
+			(nlm_reset_entry_end - nlm_reset_entry));
+
+	build_arcs_cmdline(argv);
+	prom_add_memory();
+
+#ifdef CONFIG_SMP
+	for (i = 0; i < 32; i++)
+		if (nlm_prom_info.online_cpu_map & (1 << i))
+			cpumask_set_cpu(i, &nlm_cpumask);
+	nlm_wakeup_secondary_cpus();
+	register_smp_ops(&nlm_smp_ops);
+#endif
+	xlr_board_info_setup();
+	xlr_percpu_fmn_init();
+}
diff --git a/kernel/arch/mips/netlogic/xlr/wakeup.c b/kernel/arch/mips/netlogic/xlr/wakeup.c
new file mode 100644
index 000000000..d61cba1e9
--- /dev/null
+++ b/kernel/arch/mips/netlogic/xlr/wakeup.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/delay.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlr/iomap.h>
+#include <asm/netlogic/xlr/pic.h>
+
+int xlr_wakeup_secondary_cpus(void)
+{
+	struct nlm_soc_info *nodep;
+	unsigned int i, j, boot_cpu;
+	volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
+
+	/*
+	 *  In case of RMI boot, hit with NMI to get the cores
+	 *  from bootloader to linux code.
+	 */
+	nodep = nlm_get_node(0);
+	boot_cpu = hard_smp_processor_id();
+	nlm_set_nmi_handler(nlm_rmiboot_preboot);
+	for (i = 0; i < NR_CPUS; i++) {
+		if (i == boot_cpu || !cpumask_test_cpu(i, &nlm_cpumask))
+			continue;
+		nlm_pic_send_ipi(nodep->picbase, i, 1, 1); /* send NMI */
+	}
+
+	/* Fill up the coremask early */
+	nodep->coremask = 1;
+	for (i = 1; i < nlm_cores_per_node(); i++) {
+		for (j = 1000000; j > 0; j--) {
+			if (cpu_ready[i * NLM_THREADS_PER_CORE])
+				break;
+			udelay(10);
+		}
+		if (j != 0)
+			nodep->coremask |= (1u << i);
+		else
+			pr_err("Failed to wakeup core %d\n", i);
+	}
+
+	return 0;
+}