These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 226 deletions

diff --git a/kernel/arch/mips/loongson1/common/time.c b/kernel/arch/mips/loongson1/common/time.c
deleted file mode 100644
index df0f850d6..000000000
--- a/kernel/arch/mips/loongson1/common/time.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <asm/time.h>
-
-#include <loongson1.h>
-#include <platform.h>
-
-#ifdef CONFIG_CEVT_CSRC_LS1X
-
-#if defined(CONFIG_TIMER_USE_PWM1)
-#define LS1X_TIMER_BASE	LS1X_PWM1_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM1_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM2)
-#define LS1X_TIMER_BASE	LS1X_PWM2_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM2_IRQ
-
-#elif defined(CONFIG_TIMER_USE_PWM3)
-#define LS1X_TIMER_BASE	LS1X_PWM3_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM3_IRQ
-
-#else
-#define LS1X_TIMER_BASE	LS1X_PWM0_BASE
-#define LS1X_TIMER_IRQ	LS1X_PWM0_IRQ
-#endif
-
-DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
-
-static void __iomem *timer_base;
-static uint32_t ls1x_jiffies_per_tick;
-
-static inline void ls1x_pwmtimer_set_period(uint32_t period)
-{
-	__raw_writel(period, timer_base + PWM_HRC);
-	__raw_writel(period, timer_base + PWM_LRC);
-}
-
-static inline void ls1x_pwmtimer_restart(void)
-{
-	__raw_writel(0x0, timer_base + PWM_CNT);
-	__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
-}
-
-void __init ls1x_pwmtimer_init(void)
-{
-	timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
-	if (!timer_base)
-		panic("Failed to remap timer registers");
-
-	ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
-
-	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
-	ls1x_pwmtimer_restart();
-}
-
-static cycle_t ls1x_clocksource_read(struct clocksource *cs)
-{
-	unsigned long flags;
-	int count;
-	u32 jifs;
-	static int old_count;
-	static u32 old_jifs;
-
-	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
-	/*
-	 * Although our caller may have the read side of xtime_lock,
-	 * this is now a seqlock, and we are cheating in this routine
-	 * by having side effects on state that we cannot undo if
-	 * there is a collision on the seqlock and our caller has to
-	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
-	 * jiffies as volatile despite the lock.  We read jiffies
-	 * before latching the timer count to guarantee that although
-	 * the jiffies value might be older than the count (that is,
-	 * the counter may underflow between the last point where
-	 * jiffies was incremented and the point where we latch the
-	 * count), it cannot be newer.
-	 */
-	jifs = jiffies;
-	/* read the count */
-	count = __raw_readl(timer_base + PWM_CNT);
-
-	/*
-	 * It's possible for count to appear to go the wrong way for this
-	 * reason:
-	 *
-	 *  The timer counter underflows, but we haven't handled the resulting
-	 *  interrupt and incremented jiffies yet.
-	 *
-	 * Previous attempts to handle these cases intelligently were buggy, so
-	 * we just do the simple thing now.
-	 */
-	if (count < old_count && jifs == old_jifs)
-		count = old_count;
-
-	old_count = count;
-	old_jifs = jifs;
-
-	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
-
-	return (cycle_t) (jifs * ls1x_jiffies_per_tick) + count;
-}
-
-static struct clocksource ls1x_clocksource = {
-	.name		= "ls1x-pwmtimer",
-	.read		= ls1x_clocksource_read,
-	.mask		= CLOCKSOURCE_MASK(24),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
-{
-	struct clock_event_device *cd = devid;
-
-	ls1x_pwmtimer_restart();
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static void ls1x_clockevent_set_mode(enum clock_event_mode mode,
-				     struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
-		ls1x_pwmtimer_restart();
-	case CLOCK_EVT_MODE_RESUME:
-		__raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		__raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
-			     timer_base + PWM_CTRL);
-		break;
-	default:
-		break;
-	}
-	raw_spin_unlock(&ls1x_timer_lock);
-}
-
-static int ls1x_clockevent_set_next(unsigned long evt,
-				    struct clock_event_device *cd)
-{
-	raw_spin_lock(&ls1x_timer_lock);
-	ls1x_pwmtimer_set_period(evt);
-	ls1x_pwmtimer_restart();
-	raw_spin_unlock(&ls1x_timer_lock);
-
-	return 0;
-}
-
-static struct clock_event_device ls1x_clockevent = {
-	.name		= "ls1x-pwmtimer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC,
-	.rating		= 300,
-	.irq		= LS1X_TIMER_IRQ,
-	.set_next_event	= ls1x_clockevent_set_next,
-	.set_mode	= ls1x_clockevent_set_mode,
-};
-
-static struct irqaction ls1x_pwmtimer_irqaction = {
-	.name		= "ls1x-pwmtimer",
-	.handler	= ls1x_clockevent_isr,
-	.dev_id		= &ls1x_clockevent,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-};
-
-static void __init ls1x_time_init(void)
-{
-	struct clock_event_device *cd = &ls1x_clockevent;
-	int ret;
-
-	if (!mips_hpt_frequency)
-		panic("Invalid timer clock rate");
-
-	ls1x_pwmtimer_init();
-
-	clockevent_set_clock(cd, mips_hpt_frequency);
-	cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
-	cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
-	cd->cpumask = cpumask_of(smp_processor_id());
-	clockevents_register_device(cd);
-
-	ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
-	ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
-	if (ret)
-		panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
-	setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
-}
-#endif /* CONFIG_CEVT_CSRC_LS1X */
-
-void __init plat_time_init(void)
-{
-	struct clk *clk = NULL;
-
-	/* initialize LS1X clocks */
-	ls1x_clk_init();
-
-#ifdef CONFIG_CEVT_CSRC_LS1X
-	/* setup LS1X PWM timer */
-	clk = clk_get(NULL, "ls1x_pwmtimer");
-	if (IS_ERR(clk))
-		panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
-
-	mips_hpt_frequency = clk_get_rate(clk);
-	ls1x_time_init();
-#else
-	/* setup mips r4k timer */
-	clk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(clk))
-		panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
-
-	mips_hpt_frequency = clk_get_rate(clk) / 2;
-#endif /* CONFIG_CEVT_CSRC_LS1X */
-}