Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 220 insertions, 0 deletions

diff --git a/kernel/arch/m68k/mm/fault.c b/kernel/arch/m68k/mm/fault.c
new file mode 100644
index 000000000..6a94cdd0c
--- /dev/null
+++ b/kernel/arch/m68k/mm/fault.c
@@ -0,0 +1,220 @@
+/*
+ *  linux/arch/m68k/mm/fault.c
+ *
+ *  Copyright (C) 1995  Hamish Macdonald
+ */
+
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#include <asm/setup.h>
+#include <asm/traps.h>
+#include <asm/pgalloc.h>
+
+extern void die_if_kernel(char *, struct pt_regs *, long);
+
+int send_fault_sig(struct pt_regs *regs)
+{
+	siginfo_t siginfo = { 0, 0, 0, };
+
+	siginfo.si_signo = current->thread.signo;
+	siginfo.si_code = current->thread.code;
+	siginfo.si_addr = (void *)current->thread.faddr;
+	pr_debug("send_fault_sig: %p,%d,%d\n", siginfo.si_addr,
+		 siginfo.si_signo, siginfo.si_code);
+
+	if (user_mode(regs)) {
+		force_sig_info(siginfo.si_signo,
+			       &siginfo, current);
+	} else {
+		if (handle_kernel_fault(regs))
+			return -1;
+
+		//if (siginfo.si_signo == SIGBUS)
+		//	force_sig_info(siginfo.si_signo,
+		//		       &siginfo, current);
+
+		/*
+		 * Oops. The kernel tried to access some bad page. We'll have to
+		 * terminate things with extreme prejudice.
+		 */
+		if ((unsigned long)siginfo.si_addr < PAGE_SIZE)
+			pr_alert("Unable to handle kernel NULL pointer dereference");
+		else
+			pr_alert("Unable to handle kernel access");
+		pr_cont(" at virtual address %p\n", siginfo.si_addr);
+		die_if_kernel("Oops", regs, 0 /*error_code*/);
+		do_exit(SIGKILL);
+	}
+
+	return 1;
+}
+
+/*
+ * This routine handles page faults.  It determines the problem, and
+ * then passes it off to one of the appropriate routines.
+ *
+ * error_code:
+ *	bit 0 == 0 means no page found, 1 means protection fault
+ *	bit 1 == 0 means read, 1 means write
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+int do_page_fault(struct pt_regs *regs, unsigned long address,
+			      unsigned long error_code)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct * vma;
+	int fault;
+	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+
+	pr_debug("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
+		regs->sr, regs->pc, address, error_code, mm ? mm->pgd : NULL);
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+	if (faulthandler_disabled() || !mm)
+		goto no_context;
+
+	if (user_mode(regs))
+		flags |= FAULT_FLAG_USER;
+retry:
+	down_read(&mm->mmap_sem);
+
+	vma = find_vma(mm, address);
+	if (!vma)
+		goto map_err;
+	if (vma->vm_flags & VM_IO)
+		goto acc_err;
+	if (vma->vm_start <= address)
+		goto good_area;
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto map_err;
+	if (user_mode(regs)) {
+		/* Accessing the stack below usp is always a bug.  The
+		   "+ 256" is there due to some instructions doing
+		   pre-decrement on the stack and that doesn't show up
+		   until later.  */
+		if (address + 256 < rdusp())
+			goto map_err;
+	}
+	if (expand_stack(vma, address))
+		goto map_err;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+	pr_debug("do_page_fault: good_area\n");
+	switch (error_code & 3) {
+		default:	/* 3: write, present */
+			/* fall through */
+		case 2:		/* write, not present */
+			if (!(vma->vm_flags & VM_WRITE))
+				goto acc_err;
+			flags |= FAULT_FLAG_WRITE;
+			break;
+		case 1:		/* read, present */
+			goto acc_err;
+		case 0:		/* read, not present */
+			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
+				goto acc_err;
+	}
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+
+	fault = handle_mm_fault(mm, vma, address, flags);
+	pr_debug("handle_mm_fault returns %d\n", fault);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return 0;
+
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto map_err;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto bus_err;
+		BUG();
+	}
+
+	/*
+	 * Major/minor page fault accounting is only done on the
+	 * initial attempt. If we go through a retry, it is extremely
+	 * likely that the page will be found in page cache at that point.
+	 */
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR)
+			current->maj_flt++;
+		else
+			current->min_flt++;
+		if (fault & VM_FAULT_RETRY) {
+			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
+			 * of starvation. */
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+			flags |= FAULT_FLAG_TRIED;
+
+			/*
+			 * No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
+	return 0;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+	up_read(&mm->mmap_sem);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return 0;
+
+no_context:
+	current->thread.signo = SIGBUS;
+	current->thread.faddr = address;
+	return send_fault_sig(regs);
+
+bus_err:
+	current->thread.signo = SIGBUS;
+	current->thread.code = BUS_ADRERR;
+	current->thread.faddr = address;
+	goto send_sig;
+
+map_err:
+	current->thread.signo = SIGSEGV;
+	current->thread.code = SEGV_MAPERR;
+	current->thread.faddr = address;
+	goto send_sig;
+
+acc_err:
+	current->thread.signo = SIGSEGV;
+	current->thread.code = SEGV_ACCERR;
+	current->thread.faddr = address;
+
+send_sig:
+	up_read(&mm->mmap_sem);
+	return send_fault_sig(regs);
+}