Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 252 insertions, 0 deletions

diff --git a/kernel/arch/m68k/include/asm/mac_psc.h b/kernel/arch/m68k/include/asm/mac_psc.h
new file mode 100644
index 000000000..e5c0d71d1
--- /dev/null
+++ b/kernel/arch/m68k/include/asm/mac_psc.h
@@ -0,0 +1,252 @@
+/*
+ * Apple Peripheral System Controller (PSC)
+ *
+ * The PSC is used on the AV Macs to control IO functions not handled
+ * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
+ * channels.
+ *
+ * The first seven DMA channels appear to be "one-shot" and are actually
+ * sets of two channels; one member is active while the other is being
+ * configured, and then you flip the active member and start all over again.
+ * The one-shot channels are grouped together and are:
+ *
+ * 1. SCSI
+ * 2. Ethernet Read
+ * 3. Ethernet Write
+ * 4. Floppy Disk Controller
+ * 5. SCC Channel A Receive
+ * 6. SCC Channel B Receive
+ * 7. SCC Channel A Transmit
+ *
+ * The remaining two channels are handled somewhat differently. They appear
+ * to be closely tied and share one set of registers. They also seem to run
+ * continuously, although how you keep the buffer filled in this scenario is
+ * not understood as there seems to be only one input and one output buffer
+ * pointer.
+ *
+ * Much of this was extrapolated from what was known about the Ethernet
+ * registers and subsequently confirmed using MacsBug (ie by pinging the
+ * machine with easy-to-find patterns and looking for them in the DMA
+ * buffers, or by sending a file over the serial ports and finding the
+ * file in the buffers.)
+ *
+ * 1999-05-25 (jmt)
+ */
+
+#define PSC_BASE	(0x50F31000)
+
+/*
+ * The IER/IFR registers work like the VIA, except that it has 4
+ * of them each on different interrupt levels, and each register
+ * set only seems to handle four interrupts instead of seven.
+ *
+ * To access a particular set of registers, add 0xn0 to the base
+ * where n = 3,4,5 or 6.
+ */
+
+#define pIFRbase	0x100
+#define pIERbase	0x104
+
+/*
+ * One-shot DMA control registers
+ */
+
+#define PSC_MYSTERY	0x804
+
+#define PSC_CTL_BASE	0xC00
+
+#define PSC_SCSI_CTL	0xC00
+#define PSC_ENETRD_CTL  0xC10
+#define PSC_ENETWR_CTL  0xC20
+#define PSC_FDC_CTL	0xC30
+#define PSC_SCCA_CTL	0xC40
+#define PSC_SCCB_CTL	0xC50
+#define PSC_SCCATX_CTL	0xC60
+
+/*
+ * DMA channels. Add +0x10 for the second channel in the set.
+ * You're supposed to use one channel while the other runs and
+ * then flip channels and do the whole thing again.
+ */
+
+#define PSC_ADDR_BASE	0x1000
+#define PSC_LEN_BASE	0x1004
+#define PSC_CMD_BASE	0x1008
+
+#define PSC_SET0	0x00
+#define PSC_SET1	0x10
+
+#define PSC_SCSI_ADDR	0x1000	/* confirmed */
+#define PSC_SCSI_LEN	0x1004	/* confirmed */
+#define PSC_SCSI_CMD	0x1008	/* confirmed */
+#define PSC_ENETRD_ADDR 0x1020	/* confirmed */
+#define PSC_ENETRD_LEN  0x1024	/* confirmed */
+#define PSC_ENETRD_CMD  0x1028	/* confirmed */
+#define PSC_ENETWR_ADDR 0x1040	/* confirmed */
+#define PSC_ENETWR_LEN  0x1044	/* confirmed */
+#define PSC_ENETWR_CMD  0x1048	/* confirmed */
+#define PSC_FDC_ADDR	0x1060	/* strongly suspected */
+#define PSC_FDC_LEN	0x1064	/* strongly suspected */
+#define PSC_FDC_CMD	0x1068	/* strongly suspected */
+#define PSC_SCCA_ADDR	0x1080	/* confirmed */
+#define PSC_SCCA_LEN	0x1084	/* confirmed */
+#define PSC_SCCA_CMD	0x1088	/* confirmed */
+#define PSC_SCCB_ADDR	0x10A0	/* confirmed */
+#define PSC_SCCB_LEN	0x10A4	/* confirmed */
+#define PSC_SCCB_CMD	0x10A8	/* confirmed */
+#define PSC_SCCATX_ADDR	0x10C0	/* confirmed */
+#define PSC_SCCATX_LEN	0x10C4	/* confirmed */
+#define PSC_SCCATX_CMD	0x10C8	/* confirmed */
+
+/*
+ * Free-running DMA registers. The only part known for sure are the bits in
+ * the control register, the buffer addresses and the buffer length. Everything
+ * else is anybody's guess.
+ *
+ * These registers seem to be mirrored every thirty-two bytes up until offset
+ * 0x300. It's safe to assume then that a new set of registers starts there.
+ */
+
+#define PSC_SND_CTL	0x200	/*
+				 * [ 16-bit ]
+				 * Sound (Singer?) control register.
+				 *
+				 * bit 0  : ????
+				 * bit 1  : ????
+				 * bit 2  : Set to one to enable sound
+				 *          output. Possibly a mute flag.
+				 * bit 3  : ????
+				 * bit 4  : ????
+				 * bit 5  : ????
+				 * bit 6  : Set to one to enable pass-thru
+				 *          audio. In this mode the audio data
+				 *          seems to appear in both the input
+				 *          buffer and the output buffer.
+				 * bit 7  : Set to one to activate the
+				 *          sound input DMA or zero to
+				 *          disable it.
+				 * bit 8  : Set to one to activate the
+				 *          sound output DMA or zero to
+				 *          disable it.
+				 * bit 9  : \
+				 * bit 11 :  |
+				 *          These two bits control the sample
+				 *          rate. Usually set to binary 10 and
+				 *	    MacOS 8.0 says I'm at 48 KHz. Using
+				 *	    a binary value of 01 makes things
+				 *	    sound about 1/2 speed (24 KHz?) and
+				 *          binary 00 is slower still (22 KHz?)
+				 *
+				 * Setting this to 0x0000 is a good way to
+				 * kill all DMA at boot time so that the
+				 * PSC won't overwrite the kernel image
+				 * with sound data.
+				 */
+
+/*
+ * 0x0202 - 0x0203 is unused. Writing there
+ * seems to clobber the control register.
+ */
+
+#define PSC_SND_SOURCE	0x204	/*
+				 * [ 32-bit ]
+				 * Controls input source and volume:
+				 *
+				 * bits 12-15 : input source volume, 0 - F
+				 * bits 16-19 : unknown, always 0x5
+				 * bits 20-23 : input source selection:
+				 *                  0x3 = CD Audio
+				 *                  0x4 = External Audio
+				 *
+				 * The volume is definitely not the general
+				 * output volume as it doesn't affect the
+				 * alert sound volume.
+				 */
+#define PSC_SND_STATUS1	0x208	/*
+				 * [ 32-bit ]
+				 * Appears to be a read-only status register.
+				 * The usual value is 0x00400002.
+				 */
+#define PSC_SND_HUH3	0x20C	/*
+				 * [ 16-bit ]
+				 * Unknown 16-bit value, always 0x0000.
+				 */
+#define PSC_SND_BITS2GO	0x20E	/*
+				 * [ 16-bit ]
+				 * Counts down to zero from some constant
+				 * value. The value appears to be the
+				 * number of _bits_ remaining before the
+				 * buffer is full, which would make sense
+				 * since Apple's docs say the sound DMA
+				 * channels are 1 bit wide.
+				 */
+#define PSC_SND_INADDR	0x210	/*
+				 * [ 32-bit ]
+				 * Address of the sound input DMA buffer
+				 */
+#define PSC_SND_OUTADDR	0x214	/*
+				 * [ 32-bit ]
+				 * Address of the sound output DMA buffer
+				 */
+#define PSC_SND_LEN	0x218	/*
+				 * [ 16-bit ]
+				 * Length of both buffers in eight-byte units.
+				 */
+#define PSC_SND_HUH4	0x21A	/*
+				 * [ 16-bit ]
+				 * Unknown, always 0x0000.
+				 */
+#define PSC_SND_STATUS2	0x21C	/*
+				 * [ 16-bit ]
+				 * Appears to e a read-only status register.
+				 * The usual value is 0x0200.
+				 */
+#define PSC_SND_HUH5	0x21E	/*
+				 * [ 16-bit ]
+				 * Unknown, always 0x0000.
+				 */
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *psc;
+extern int psc_present;
+
+extern void psc_register_interrupts(void);
+extern void psc_irq_enable(int);
+extern void psc_irq_disable(int);
+
+/*
+ *	Access functions
+ */
+
+static inline void psc_write_byte(int offset, __u8 data)
+{
+	*((volatile __u8 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_word(int offset, __u16 data)
+{
+	*((volatile __u16 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_long(int offset, __u32 data)
+{
+	*((volatile __u32 *)(psc + offset)) = data;
+}
+
+static inline u8 psc_read_byte(int offset)
+{
+	return *((volatile __u8 *)(psc + offset));
+}
+
+static inline u16 psc_read_word(int offset)
+{
+	return *((volatile __u16 *)(psc + offset));
+}
+
+static inline u32 psc_read_long(int offset)
+{
+	return *((volatile __u32 *)(psc + offset));
+}
+
+#endif /* __ASSEMBLY__ */