Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 1062 insertions, 0 deletions

diff --git a/kernel/arch/ia64/sn/pci/tioce_provider.c b/kernel/arch/ia64/sn/pci/tioce_provider.c
new file mode 100644
index 000000000..46d3df4b0
--- /dev/null
+++ b/kernel/arch/ia64/sn/pci/tioce_provider.c
@@ -0,0 +1,1062 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/io.h>
+#include <asm/sn/pcidev.h>
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce_provider.h>
+
+/*
+ * 1/26/2006
+ *
+ * WAR for SGI PV 944642.  For revA TIOCE, need to use the following recipe
+ * (taken from the above PV) before and after accessing tioce internal MMR's
+ * to avoid tioce lockups.
+ *
+ * The recipe as taken from the PV:
+ *
+ *	if(mmr address < 0x45000) {
+ *		if(mmr address == 0 or 0x80)
+ *			mmr wrt or read address 0xc0
+ *		else if(mmr address == 0x148 or 0x200)
+ *			mmr wrt or read address 0x28
+ *		else
+ *			mmr wrt or read address 0x158
+ *
+ *		do desired mmr access (rd or wrt)
+ *
+ *		if(mmr address == 0x100)
+ *			mmr wrt or read address 0x38
+ *		mmr wrt or read address 0xb050
+ *	} else
+ *		do desired mmr access
+ *
+ * According to hw, we can use reads instead of writes to the above address
+ *
+ * Note this WAR can only to be used for accessing internal MMR's in the
+ * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff.  This includes the
+ * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
+ * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
+ *
+ * All registers defined in struct tioce will meet that criteria.
+ */
+
+static void inline
+tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr)
+{
+	u64 mmr_base;
+	u64 mmr_offset;
+
+	if (kern->ce_common->ce_rev != TIOCE_REV_A)
+		return;
+
+	mmr_base = kern->ce_common->ce_pcibus.bs_base;
+	mmr_offset = (unsigned long)mmr_addr - mmr_base;
+
+	if (mmr_offset < 0x45000) {
+		u64 mmr_war_offset;
+
+		if (mmr_offset == 0 || mmr_offset == 0x80)
+			mmr_war_offset = 0xc0;
+		else if (mmr_offset == 0x148 || mmr_offset == 0x200)
+			mmr_war_offset = 0x28;
+		else
+			mmr_war_offset = 0x158;
+
+		readq_relaxed((void __iomem *)(mmr_base + mmr_war_offset));
+	}
+}
+
+static void inline
+tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr)
+{
+	u64 mmr_base;
+	u64 mmr_offset;
+
+	if (kern->ce_common->ce_rev != TIOCE_REV_A)
+		return;
+
+	mmr_base = kern->ce_common->ce_pcibus.bs_base;
+	mmr_offset = (unsigned long)mmr_addr - mmr_base;
+
+	if (mmr_offset < 0x45000) {
+		if (mmr_offset == 0x100)
+			readq_relaxed((void __iomem *)(mmr_base + 0x38));
+		readq_relaxed((void __iomem *)(mmr_base + 0xb050));
+	}
+}
+
+/* load mmr contents into a variable */
+#define tioce_mmr_load(kern, mmrp, varp) do {\
+	tioce_mmr_war_pre(kern, mmrp); \
+	*(varp) = readq_relaxed(mmrp); \
+	tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store variable contents into mmr */
+#define tioce_mmr_store(kern, mmrp, varp) do {\
+	tioce_mmr_war_pre(kern, mmrp); \
+	writeq(*varp, mmrp); \
+	tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* store immediate value into mmr */
+#define tioce_mmr_storei(kern, mmrp, val) do {\
+	tioce_mmr_war_pre(kern, mmrp); \
+	writeq(val, mmrp); \
+	tioce_mmr_war_post(kern, mmrp); \
+} while (0)
+
+/* set bits (immediate value) into mmr */
+#define tioce_mmr_seti(kern, mmrp, bits) do {\
+	u64 tmp; \
+	tioce_mmr_load(kern, mmrp, &tmp); \
+	tmp |= (bits); \
+	tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/* clear bits (immediate value) into mmr */
+#define tioce_mmr_clri(kern, mmrp, bits) do { \
+	u64 tmp; \
+	tioce_mmr_load(kern, mmrp, &tmp); \
+	tmp &= ~(bits); \
+	tioce_mmr_store(kern, mmrp, &tmp); \
+} while (0)
+
+/**
+ * Bus address ranges for the 5 flavors of TIOCE DMA
+ */
+
+#define TIOCE_D64_MIN	0x8000000000000000UL
+#define TIOCE_D64_MAX	0xffffffffffffffffUL
+#define TIOCE_D64_ADDR(a)	((a) >= TIOCE_D64_MIN)
+
+#define TIOCE_D32_MIN	0x0000000080000000UL
+#define TIOCE_D32_MAX	0x00000000ffffffffUL
+#define TIOCE_D32_ADDR(a)	((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX)
+
+#define TIOCE_M32_MIN	0x0000000000000000UL
+#define TIOCE_M32_MAX	0x000000007fffffffUL
+#define TIOCE_M32_ADDR(a)	((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX)
+
+#define TIOCE_M40_MIN	0x0000004000000000UL
+#define TIOCE_M40_MAX	0x0000007fffffffffUL
+#define TIOCE_M40_ADDR(a)	((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX)
+
+#define TIOCE_M40S_MIN	0x0000008000000000UL
+#define TIOCE_M40S_MAX	0x000000ffffffffffUL
+#define TIOCE_M40S_ADDR(a)	((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX)
+
+/*
+ * ATE manipulation macros.
+ */
+
+#define ATE_PAGESHIFT(ps)	(__ffs(ps))
+#define ATE_PAGEMASK(ps)	((ps)-1)
+
+#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps))
+#define ATE_NPAGES(start, len, pagesize) \
+	(ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)
+
+#define ATE_VALID(ate)	((ate) & (1UL << 63))
+#define ATE_MAKE(addr, ps, msi) \
+	(((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63) | ((msi)?(1UL << 62):0))
+
+/*
+ * Flavors of ate-based mapping supported by tioce_alloc_map()
+ */
+
+#define TIOCE_ATE_M32	1
+#define TIOCE_ATE_M40	2
+#define TIOCE_ATE_M40S	3
+
+#define KB(x)	((u64)(x) << 10)
+#define MB(x)	((u64)(x) << 20)
+#define GB(x)	((u64)(x) << 30)
+
+/**
+ * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
+ * @ct_addr: system coretalk address
+ *
+ * Map @ct_addr into 64-bit CE bus space.  No device context is necessary
+ * and no CE mapping are consumed.
+ *
+ * Bits 53:0 come from the coretalk address.  The remaining bits are set as
+ * follows:
+ *
+ * 63    - must be 1 to indicate d64 mode to CE hardware
+ * 62    - barrier bit ... controlled with tioce_dma_barrier()
+ * 61    - msi bit ... specified through dma_flags
+ * 60:54 - reserved, MBZ
+ */
+static u64
+tioce_dma_d64(unsigned long ct_addr, int dma_flags)
+{
+	u64 bus_addr;
+
+	bus_addr = ct_addr | (1UL << 63);
+	if (dma_flags & SN_DMA_MSI)
+		bus_addr |= (1UL << 61);
+
+	return bus_addr;
+}
+
+/**
+ * pcidev_to_tioce - return misc ce related pointers given a pci_dev
+ * @pci_dev: pci device context
+ * @base: ptr to store struct tioce_mmr * for the CE holding this device
+ * @kernel: ptr to store struct tioce_kernel * for the CE holding this device
+ * @port: ptr to store the CE port number that this device is on
+ *
+ * Return pointers to various CE-related structures for the CE upstream of
+ * @pci_dev.
+ */
+static inline void
+pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base,
+		struct tioce_kernel **kernel, int *port)
+{
+	struct pcidev_info *pcidev_info;
+	struct tioce_common *ce_common;
+	struct tioce_kernel *ce_kernel;
+
+	pcidev_info = SN_PCIDEV_INFO(pdev);
+	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+	ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+	if (base)
+		*base = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
+	if (kernel)
+		*kernel = ce_kernel;
+
+	/*
+	 * we use port as a zero-based value internally, even though the
+	 * documentation is 1-based.
+	 */
+	if (port)
+		*port =
+		    (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1;
+}
+
+/**
+ * tioce_alloc_map - Given a coretalk address, map it to pcie bus address
+ * space using one of the various ATE-based address modes.
+ * @ce_kern: tioce context
+ * @type: map mode to use
+ * @port: 0-based port that the requesting device is downstream of
+ * @ct_addr: the coretalk address to map
+ * @len: number of bytes to map
+ *
+ * Given the addressing type, set up various parameters that define the
+ * ATE pool to use.  Search for a contiguous block of entries to cover the
+ * length, and if enough resources exist, fill in the ATEs and construct a
+ * tioce_dmamap struct to track the mapping.
+ */
+static u64
+tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
+		u64 ct_addr, int len, int dma_flags)
+{
+	int i;
+	int j;
+	int first;
+	int last;
+	int entries;
+	int nates;
+	u64 pagesize;
+	int msi_capable, msi_wanted;
+	u64 *ate_shadow;
+	u64 __iomem *ate_reg;
+	u64 addr;
+	struct tioce __iomem *ce_mmr;
+	u64 bus_base;
+	struct tioce_dmamap *map;
+
+	ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
+
+	switch (type) {
+	case TIOCE_ATE_M32:
+		/*
+		 * The first 64 entries of the ate3240 pool are dedicated to
+		 * super-page (TIOCE_ATE_M40S) mode.
+		 */
+		first = 64;
+		entries = TIOCE_NUM_M3240_ATES - 64;
+		ate_shadow = ce_kern->ce_ate3240_shadow;
+		ate_reg = ce_mmr->ce_ure_ate3240;
+		pagesize = ce_kern->ce_ate3240_pagesize;
+		bus_base = TIOCE_M32_MIN;
+		msi_capable = 1;
+		break;
+	case TIOCE_ATE_M40:
+		first = 0;
+		entries = TIOCE_NUM_M40_ATES;
+		ate_shadow = ce_kern->ce_ate40_shadow;
+		ate_reg = ce_mmr->ce_ure_ate40;
+		pagesize = MB(64);
+		bus_base = TIOCE_M40_MIN;
+		msi_capable = 0;
+		break;
+	case TIOCE_ATE_M40S:
+		/*
+		 * ate3240 entries 0-31 are dedicated to port1 super-page
+		 * mappings.  ate3240 entries 32-63 are dedicated to port2.
+		 */
+		first = port * 32;
+		entries = 32;
+		ate_shadow = ce_kern->ce_ate3240_shadow;
+		ate_reg = ce_mmr->ce_ure_ate3240;
+		pagesize = GB(16);
+		bus_base = TIOCE_M40S_MIN;
+		msi_capable = 0;
+		break;
+	default:
+		return 0;
+	}
+
+	msi_wanted = dma_flags & SN_DMA_MSI;
+	if (msi_wanted && !msi_capable)
+		return 0;
+
+	nates = ATE_NPAGES(ct_addr, len, pagesize);
+	if (nates > entries)
+		return 0;
+
+	last = first + entries - nates;
+	for (i = first; i <= last; i++) {
+		if (ATE_VALID(ate_shadow[i]))
+			continue;
+
+		for (j = i; j < i + nates; j++)
+			if (ATE_VALID(ate_shadow[j]))
+				break;
+
+		if (j >= i + nates)
+			break;
+	}
+
+	if (i > last)
+		return 0;
+
+	map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC);
+	if (!map)
+		return 0;
+
+	addr = ct_addr;
+	for (j = 0; j < nates; j++) {
+		u64 ate;
+
+		ate = ATE_MAKE(addr, pagesize, msi_wanted);
+		ate_shadow[i + j] = ate;
+		tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
+		addr += pagesize;
+	}
+
+	map->refcnt = 1;
+	map->nbytes = nates * pagesize;
+	map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize);
+	map->pci_start = bus_base + (i * pagesize);
+	map->ate_hw = &ate_reg[i];
+	map->ate_shadow = &ate_shadow[i];
+	map->ate_count = nates;
+
+	list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list);
+
+	return (map->pci_start + (ct_addr - map->ct_start));
+}
+
+/**
+ * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode
+ * @pdev: linux pci_dev representing the function
+ * @paddr: system physical address
+ *
+ * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
+ */
+static u64
+tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags)
+{
+	int dma_ok;
+	int port;
+	struct tioce __iomem *ce_mmr;
+	struct tioce_kernel *ce_kern;
+	u64 ct_upper;
+	u64 ct_lower;
+	dma_addr_t bus_addr;
+
+	if (dma_flags & SN_DMA_MSI)
+		return 0;
+
+	ct_upper = ct_addr & ~0x3fffffffUL;
+	ct_lower = ct_addr & 0x3fffffffUL;
+
+	pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+	if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
+		u64 tmp;
+
+		ce_kern->ce_port[port].dirmap_shadow = ct_upper;
+		tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+				 ct_upper);
+		tmp = ce_mmr->ce_ure_dir_map[port];
+		dma_ok = 1;
+	} else
+		dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper);
+
+	if (dma_ok) {
+		ce_kern->ce_port[port].dirmap_refcnt++;
+		bus_addr = TIOCE_D32_MIN + ct_lower;
+	} else
+		bus_addr = 0;
+
+	return bus_addr;
+}
+
+/**
+ * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude
+ * the barrier bit.
+ * @bus_addr:  bus address to swizzle
+ *
+ * Given a TIOCE bus address, set the appropriate bit to indicate barrier
+ * attributes.
+ */
+static u64
+tioce_dma_barrier(u64 bus_addr, int on)
+{
+	u64 barrier_bit;
+
+	/* barrier not supported in M40/M40S mode */
+	if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
+		return bus_addr;
+
+	if (TIOCE_D64_ADDR(bus_addr))
+		barrier_bit = (1UL << 62);
+	else			/* must be m32 or d32 */
+		barrier_bit = (1UL << 30);
+
+	return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit);
+}
+
+/**
+ * tioce_dma_unmap - release CE mapping resources
+ * @pdev: linux pci_dev representing the function
+ * @bus_addr: bus address returned by an earlier tioce_dma_map
+ * @dir: mapping direction (unused)
+ *
+ * Locate mapping resources associated with @bus_addr and release them.
+ * For mappings created using the direct modes there are no resources
+ * to release.
+ */
+void
+tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
+{
+	int i;
+	int port;
+	struct tioce_kernel *ce_kern;
+	struct tioce __iomem *ce_mmr;
+	unsigned long flags;
+
+	bus_addr = tioce_dma_barrier(bus_addr, 0);
+	pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+	/* nothing to do for D64 */
+
+	if (TIOCE_D64_ADDR(bus_addr))
+		return;
+
+	spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+	if (TIOCE_D32_ADDR(bus_addr)) {
+		if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
+			ce_kern->ce_port[port].dirmap_shadow = 0;
+			tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
+					 0);
+		}
+	} else {
+		struct tioce_dmamap *map;
+
+		list_for_each_entry(map, &ce_kern->ce_dmamap_list,
+				    ce_dmamap_list) {
+			u64 last;
+
+			last = map->pci_start + map->nbytes - 1;
+			if (bus_addr >= map->pci_start && bus_addr <= last)
+				break;
+		}
+
+		if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
+			printk(KERN_WARNING
+			       "%s:  %s - no map found for bus_addr 0x%llx\n",
+			       __func__, pci_name(pdev), bus_addr);
+		} else if (--map->refcnt == 0) {
+			for (i = 0; i < map->ate_count; i++) {
+				map->ate_shadow[i] = 0;
+				tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
+			}
+
+			list_del(&map->ce_dmamap_list);
+			kfree(map);
+		}
+	}
+
+	spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+}
+
+/**
+ * tioce_do_dma_map - map pages for PCI DMA
+ * @pdev: linux pci_dev representing the function
+ * @paddr: host physical address to map
+ * @byte_count: bytes to map
+ *
+ * This is the main wrapper for mapping host physical pages to CE PCI space.
+ * The mapping mode used is based on the device's dma_mask.
+ */
+static u64
+tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
+		 int barrier, int dma_flags)
+{
+	unsigned long flags;
+	u64 ct_addr;
+	u64 mapaddr = 0;
+	struct tioce_kernel *ce_kern;
+	struct tioce_dmamap *map;
+	int port;
+	u64 dma_mask;
+
+	dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
+
+	/* cards must be able to address at least 31 bits */
+	if (dma_mask < 0x7fffffffUL)
+		return 0;
+
+	if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
+		ct_addr = PHYS_TO_TIODMA(paddr);
+	else
+		ct_addr = paddr;
+
+	/*
+	 * If the device can generate 64 bit addresses, create a D64 map.
+	 */
+	if (dma_mask == ~0UL) {
+		mapaddr = tioce_dma_d64(ct_addr, dma_flags);
+		if (mapaddr)
+			goto dma_map_done;
+	}
+
+	pcidev_to_tioce(pdev, NULL, &ce_kern, &port);
+
+	spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+	/*
+	 * D64 didn't work ... See if we have an existing map that covers
+	 * this address range.  Must account for devices dma_mask here since
+	 * an existing map might have been done in a mode using more pci
+	 * address bits than this device can support.
+	 */
+	list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
+		u64 last;
+
+		last = map->ct_start + map->nbytes - 1;
+		if (ct_addr >= map->ct_start &&
+		    ct_addr + byte_count - 1 <= last &&
+		    map->pci_start <= dma_mask) {
+			map->refcnt++;
+			mapaddr = map->pci_start + (ct_addr - map->ct_start);
+			break;
+		}
+	}
+
+	/*
+	 * If we don't have a map yet, and the card can generate 40
+	 * bit addresses, try the M40/M40S modes.  Note these modes do not
+	 * support a barrier bit, so if we need a consistent map these
+	 * won't work.
+	 */
+	if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) {
+		/*
+		 * We have two options for 40-bit mappings:  16GB "super" ATEs
+		 * and 64MB "regular" ATEs.  We'll try both if needed for a
+		 * given mapping but which one we try first depends on the
+		 * size.  For requests >64MB, prefer to use a super page with
+		 * regular as the fallback. Otherwise, try in the reverse order.
+		 */
+
+		if (byte_count > MB(64)) {
+			mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+						  port, ct_addr, byte_count,
+						  dma_flags);
+			if (!mapaddr)
+				mapaddr =
+				    tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+						    ct_addr, byte_count,
+						    dma_flags);
+		} else {
+			mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+						  ct_addr, byte_count,
+						  dma_flags);
+			if (!mapaddr)
+				mapaddr =
+				    tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+						    port, ct_addr, byte_count,
+						    dma_flags);
+		}
+	}
+
+	/*
+	 * 32-bit direct is the next mode to try
+	 */
+	if (!mapaddr && dma_mask >= 0xffffffffUL)
+		mapaddr = tioce_dma_d32(pdev, ct_addr, dma_flags);
+
+	/*
+	 * Last resort, try 32-bit ATE-based map.
+	 */
+	if (!mapaddr)
+		mapaddr =
+		    tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
+				    byte_count, dma_flags);
+
+	spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+
+dma_map_done:
+	if (mapaddr && barrier)
+		mapaddr = tioce_dma_barrier(mapaddr, 1);
+
+	return mapaddr;
+}
+
+/**
+ * tioce_dma - standard pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit clear
+ * in the address.
+ */
+static u64
+tioce_dma(struct pci_dev *pdev, unsigned long  paddr, size_t byte_count, int dma_flags)
+{
+	return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags);
+}
+
+/**
+ * tioce_dma_consistent - consistent pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit set
+ * in the address.
+ */
+static u64
+tioce_dma_consistent(struct pci_dev *pdev, unsigned long  paddr, size_t byte_count, int dma_flags)
+{
+	return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags);
+}
+
+/**
+ * tioce_error_intr_handler - SGI TIO CE error interrupt handler
+ * @irq: unused
+ * @arg: pointer to tioce_common struct for the given CE
+ *
+ * Handle a CE error interrupt.  Simply a wrapper around a SAL call which
+ * defers processing to the SGI prom.
+ */
+static irqreturn_t
+tioce_error_intr_handler(int irq, void *arg)
+{
+	struct tioce_common *soft = arg;
+	struct ia64_sal_retval ret_stuff;
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+
+	SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
+			soft->ce_pcibus.bs_persist_segment,
+			soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.v0)
+		panic("tioce_error_intr_handler:  Fatal TIOCE error");
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range
+ * @tioce_kernel: TIOCE context to reserve ATEs for
+ * @base: starting bus address to reserve
+ * @limit: last bus address to reserve
+ *
+ * If base/limit falls within the range of bus space mapped through the
+ * M32 space, reserve the resources corresponding to the range.
+ */
+static void
+tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
+{
+	int ate_index, last_ate, ps;
+	struct tioce __iomem *ce_mmr;
+
+	ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
+	ps = ce_kern->ce_ate3240_pagesize;
+	ate_index = ATE_PAGE(base, ps);
+	last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;
+
+	if (ate_index < 64)
+		ate_index = 64;
+
+	if (last_ate >= TIOCE_NUM_M3240_ATES)
+		last_ate = TIOCE_NUM_M3240_ATES - 1;
+
+	while (ate_index <= last_ate) {
+		u64 ate;
+
+		ate = ATE_MAKE(0xdeadbeef, ps, 0);
+		ce_kern->ce_ate3240_shadow[ate_index] = ate;
+		tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
+				 ate);
+		ate_index++;
+	}
+}
+
+/**
+ * tioce_kern_init - init kernel structures related to a given TIOCE
+ * @tioce_common: ptr to a cached tioce_common struct that originated in prom
+ */
+static struct tioce_kernel *
+tioce_kern_init(struct tioce_common *tioce_common)
+{
+	int i;
+	int ps;
+	int dev;
+	u32 tmp;
+	unsigned int seg, bus;
+	struct tioce __iomem *tioce_mmr;
+	struct tioce_kernel *tioce_kern;
+
+	tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL);
+	if (!tioce_kern) {
+		return NULL;
+	}
+
+	tioce_kern->ce_common = tioce_common;
+	spin_lock_init(&tioce_kern->ce_lock);
+	INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
+	tioce_common->ce_kernel_private = (u64) tioce_kern;
+
+	/*
+	 * Determine the secondary bus number of the port2 logical PPB.
+	 * This is used to decide whether a given pci device resides on
+	 * port1 or port2.  Note:  We don't have enough plumbing set up
+	 * here to use pci_read_config_xxx() so use raw_pci_read().
+	 */
+
+	seg = tioce_common->ce_pcibus.bs_persist_segment;
+	bus = tioce_common->ce_pcibus.bs_persist_busnum;
+
+	raw_pci_read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
+	tioce_kern->ce_port1_secondary = (u8) tmp;
+
+	/*
+	 * Set PMU pagesize to the largest size available, and zero out
+	 * the ATEs.
+	 */
+
+	tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
+	tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
+		       CE_URE_PAGESIZE_MASK);
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
+		       CE_URE_256K_PAGESIZE);
+	ps = tioce_kern->ce_ate3240_pagesize = KB(256);
+
+	for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
+		tioce_kern->ce_ate40_shadow[i] = 0;
+		tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
+	}
+
+	for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
+		tioce_kern->ce_ate3240_shadow[i] = 0;
+		tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
+	}
+
+	/*
+	 * Reserve ATEs corresponding to reserved address ranges.  These
+	 * include:
+	 *
+	 *	Memory space covered by each PPB mem base/limit register
+	 * 	Memory space covered by each PPB prefetch base/limit register
+	 *
+	 * These bus ranges are for pio (downstream) traffic only, and so
+	 * cannot be used for DMA.
+	 */
+
+	for (dev = 1; dev <= 2; dev++) {
+		u64 base, limit;
+
+		/* mem base/limit */
+
+		raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_MEMORY_BASE, 2, &tmp);
+		base = (u64)tmp << 16;
+
+		raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_MEMORY_LIMIT, 2, &tmp);
+		limit = (u64)tmp << 16;
+		limit |= 0xfffffUL;
+
+		if (base < limit)
+			tioce_reserve_m32(tioce_kern, base, limit);
+
+		/*
+		 * prefetch mem base/limit.  The tioce ppb's have 64-bit
+		 * decoders, so read the upper portions w/o checking the
+		 * attributes.
+		 */
+
+		raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_MEMORY_BASE, 2, &tmp);
+		base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+
+		raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_BASE_UPPER32, 4, &tmp);
+		base |= (u64)tmp << 32;
+
+		raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_MEMORY_LIMIT, 2, &tmp);
+
+		limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
+		limit |= 0xfffffUL;
+
+		raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
+				  PCI_PREF_LIMIT_UPPER32, 4, &tmp);
+		limit |= (u64)tmp << 32;
+
+		if ((base < limit) && TIOCE_M32_ADDR(base))
+			tioce_reserve_m32(tioce_kern, base, limit);
+	}
+
+	return tioce_kern;
+}
+
+/**
+ * tioce_force_interrupt - implement altix force_interrupt() backend for CE
+ * @sn_irq_info: sn asic irq that we need an interrupt generated for
+ *
+ * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to
+ * force a secondary interrupt to be generated.  This is to work around an
+ * asic issue where there is a small window of opportunity for a legacy device
+ * interrupt to be lost.
+ */
+static void
+tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
+{
+	struct pcidev_info *pcidev_info;
+	struct tioce_common *ce_common;
+	struct tioce_kernel *ce_kern;
+	struct tioce __iomem *ce_mmr;
+	u64 force_int_val;
+
+	if (!sn_irq_info->irq_bridge)
+		return;
+
+	if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE)
+		return;
+
+	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+	if (!pcidev_info)
+		return;
+
+	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+	ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
+	ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+	/*
+	 * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
+	 * the TIO_INTx register directly (1/26/2006)
+	 */
+	if (ce_common->ce_rev == TIOCE_REV_A) {
+		u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
+		u64 status;
+
+		tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
+		if (status & int_bit_mask) {
+			u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
+			u64 ctalk = sn_irq_info->irq_xtalkaddr;
+			u64 nasid, offset;
+
+			nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
+			offset = (ctalk & CTALK_NODE_OFFSET);
+			HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
+		}
+
+		return;
+	}
+
+	/*
+	 * irq_int_bit is originally set up by prom, and holds the interrupt
+	 * bit shift (not mask) as defined by the bit definitions in the
+	 * ce_adm_int mmr.  These shifts are not the same for the
+	 * ce_adm_force_int register, so do an explicit mapping here to make
+	 * things clearer.
+	 */
+
+	switch (sn_irq_info->irq_int_bit) {
+	case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT;
+		break;
+	default:
+		return;
+	}
+	tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
+}
+
+/**
+ * tioce_target_interrupt - implement set_irq_affinity for tioce resident
+ * functions.  Note:  only applies to line interrupts, not MSI's.
+ *
+ * @sn_irq_info: SN IRQ context
+ *
+ * Given an sn_irq_info, set the associated CE device's interrupt destination
+ * register.  Since the interrupt destination registers are on a per-ce-slot
+ * basis, this will retarget line interrupts for all functions downstream of
+ * the slot.
+ */
+static void
+tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
+{
+	struct pcidev_info *pcidev_info;
+	struct tioce_common *ce_common;
+	struct tioce_kernel *ce_kern;
+	struct tioce __iomem *ce_mmr;
+	int bit;
+	u64 vector;
+
+	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+	if (!pcidev_info)
+		return;
+
+	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+	ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
+	ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+	bit = sn_irq_info->irq_int_bit;
+
+	tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
+	vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+	vector |= sn_irq_info->irq_xtalkaddr;
+	tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
+	tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
+
+	tioce_force_interrupt(sn_irq_info);
+}
+
+/**
+ * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus
+ * @prom_bussoft: Common prom/kernel struct representing the bus
+ *
+ * Replicates the tioce_common pointed to by @prom_bussoft in kernel
+ * space.  Allocates and initializes a kernel-only area for a given CE,
+ * and sets up an irq for handling CE error interrupts.
+ *
+ * On successful setup, returns the kernel version of tioce_common back to
+ * the caller.
+ */
+static void *
+tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
+{
+	struct tioce_common *tioce_common;
+	struct tioce_kernel *tioce_kern;
+	struct tioce __iomem *tioce_mmr;
+
+	/*
+	 * Allocate kernel bus soft and copy from prom.
+	 */
+
+	tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL);
+	if (!tioce_common)
+		return NULL;
+
+	memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
+	tioce_common->ce_pcibus.bs_base = (unsigned long)
+		ioremap(REGION_OFFSET(tioce_common->ce_pcibus.bs_base),
+			sizeof(struct tioce_common));
+
+	tioce_kern = tioce_kern_init(tioce_common);
+	if (tioce_kern == NULL) {
+		kfree(tioce_common);
+		return NULL;
+	}
+
+	/*
+	 * Clear out any transient errors before registering the error
+	 * interrupt handler.
+	 */
+
+	tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
+		       ~0ULL);
+	tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, 0ULL);
+
+	if (request_irq(SGI_PCIASIC_ERROR,
+			tioce_error_intr_handler,
+			IRQF_SHARED, "TIOCE error", (void *)tioce_common))
+		printk(KERN_WARNING
+		       "%s:  Unable to get irq %d.  "
+		       "Error interrupts won't be routed for "
+		       "TIOCE bus %04x:%02x\n",
+		       __func__, SGI_PCIASIC_ERROR,
+		       tioce_common->ce_pcibus.bs_persist_segment,
+		       tioce_common->ce_pcibus.bs_persist_busnum);
+
+	irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq);
+	sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
+	return tioce_common;
+}
+
+static struct sn_pcibus_provider tioce_pci_interfaces = {
+	.dma_map = tioce_dma,
+	.dma_map_consistent = tioce_dma_consistent,
+	.dma_unmap = tioce_dma_unmap,
+	.bus_fixup = tioce_bus_fixup,
+	.force_interrupt = tioce_force_interrupt,
+	.target_interrupt = tioce_target_interrupt
+};
+
+/**
+ * tioce_init_provider - init SN PCI provider ops for TIO CE
+ */
+int
+tioce_init_provider(void)
+{
+	sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces;
+	return 0;
+}