These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

27 files changed, 504 insertions, 399 deletions

diff --git a/kernel/arch/cris/include/uapi/asm/Kbuild b/kernel/arch/cris/include/uapi/asm/Kbuild
index 01f66b8f1..d5564a0ae 100644
--- a/kernel/arch/cris/include/uapi/asm/Kbuild
+++ b/kernel/arch/cris/include/uapi/asm/Kbuild
@@ -6,6 +6,9 @@ header-y += ../arch-v32/arch/
 header-y += auxvec.h
 header-y += bitsperlong.h
 header-y += byteorder.h
+header-y += elf.h
+header-y += elf_v10.h
+header-y += elf_v32.h
 header-y += errno.h
 header-y += ethernet.h
 header-y += etraxgpio.h
@@ -19,6 +22,8 @@ header-y += param.h
 header-y += poll.h
 header-y += posix_types.h
 header-y += ptrace.h
+header-y += ptrace_v10.h
+header-y += ptrace_v32.h
 header-y += resource.h
 header-y += rs485.h
 header-y += sembuf.h
diff --git a/kernel/arch/cris/include/uapi/asm/auxvec.h b/kernel/arch/cris/include/uapi/asm/auxvec.h
deleted file mode 100644
index cb30b01bf..000000000
--- a/kernel/arch/cris/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __ASMCRIS_AUXVEC_H
-#define __ASMCRIS_AUXVEC_H
-
-#endif
diff --git a/kernel/arch/cris/include/uapi/asm/bitsperlong.h b/kernel/arch/cris/include/uapi/asm/bitsperlong.h
deleted file mode 100644
index 6dc0bb0c1..000000000
--- a/kernel/arch/cris/include/uapi/asm/bitsperlong.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>
diff --git a/kernel/arch/cris/include/uapi/asm/elf.h b/kernel/arch/cris/include/uapi/asm/elf.h
new file mode 100644
index 000000000..a5df05bfe
--- /dev/null
+++ b/kernel/arch/cris/include/uapi/asm/elf.h
@@ -0,0 +1,90 @@
+#ifndef __ASMCRIS_ELF_H
+#define __ASMCRIS_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#ifdef __arch_v32
+#include <asm/elf_v32.h>
+#else
+#include <asm/elf_v10.h>
+#endif
+
+#define R_CRIS_NONE             0
+#define R_CRIS_8                1
+#define R_CRIS_16               2
+#define R_CRIS_32               3
+#define R_CRIS_8_PCREL          4
+#define R_CRIS_16_PCREL         5
+#define R_CRIS_32_PCREL         6
+#define R_CRIS_GNU_VTINHERIT    7
+#define R_CRIS_GNU_VTENTRY      8
+#define R_CRIS_COPY             9
+#define R_CRIS_GLOB_DAT         10
+#define R_CRIS_JUMP_SLOT        11
+#define R_CRIS_RELATIVE         12
+#define R_CRIS_16_GOT           13
+#define R_CRIS_32_GOT           14
+#define R_CRIS_16_GOTPLT        15
+#define R_CRIS_32_GOTPLT        16
+#define R_CRIS_32_GOTREL        17
+#define R_CRIS_32_PLT_GOTREL    18
+#define R_CRIS_32_PLT_PCREL     19
+
+typedef unsigned long elf_greg_t;
+
+/* Note that NGREG is defined to ELF_NGREG in include/linux/elfcore.h, and is
+   thus exposed to user-space. */
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* A placeholder; CRIS does not have any fp regs.  */
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_CRIS
+
+/* The master for these definitions is {binutils}/include/elf/cris.h:  */
+/* User symbols in this file have a leading underscore.  */
+#define EF_CRIS_UNDERSCORE		0x00000001
+
+/* This is a mask for different incompatible machine variants.  */
+#define EF_CRIS_VARIANT_MASK		0x0000000e
+
+/* Variant 0; may contain v0..10 object.  */
+#define EF_CRIS_VARIANT_ANY_V0_V10	0x00000000
+
+/* Variant 1; contains v32 object.  */
+#define EF_CRIS_VARIANT_V32		0x00000002
+
+/* Variant 2; contains object compatible with v32 and v10.  */
+#define EF_CRIS_VARIANT_COMMON_V10_V32	0x00000004
+/* End of excerpt from {binutils}/include/elf/cris.h.  */
+
+#define ELF_EXEC_PAGESIZE	8192
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_SIZE / 3 * 2)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+*/
+
+#define ELF_PLATFORM  (NULL)
+
+#endif
diff --git a/kernel/arch/cris/include/uapi/asm/elf_v10.h b/kernel/arch/cris/include/uapi/asm/elf_v10.h
new file mode 100644
index 000000000..3ea65cef5
--- /dev/null
+++ b/kernel/arch/cris/include/uapi/asm/elf_v10.h
@@ -0,0 +1,84 @@
+#ifndef __ASMCRIS_ARCH_ELF_H
+#define __ASMCRIS_ARCH_ELF_H
+
+#define ELF_MACH EF_CRIS_VARIANT_ANY_V0_V10
+
+/* Matches struct user_regs_struct */
+#define ELF_NGREG 35
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)			\
+ ((x)->e_machine == EM_CRIS			\
+  && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_ANY_V0_V10	\
+      || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32))))
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+/* SVR4/i386 ABI (pages 3-31, 3-32) says that when the program
+   starts (a register; assume first param register for CRIS)
+   contains a pointer to a function which might be
+   registered using `atexit'.  This provides a mean for the
+   dynamic linker to call DT_FINI functions for shared libraries
+   that have been loaded before the code runs.
+
+   A value of 0 tells we have no such handler.  */
+
+/* Explicitly set registers to 0 to increase determinism.  */
+#define ELF_PLAT_INIT(_r, load_addr)	do { \
+	(_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \
+	(_r)->r9 = 0;  (_r)->r8 = 0;  (_r)->r7 = 0;  (_r)->r6 = 0;  \
+	(_r)->r5 = 0;  (_r)->r4 = 0;  (_r)->r3 = 0;  (_r)->r2 = 0;  \
+	(_r)->r1 = 0;  (_r)->r0 = 0;  (_r)->mof = 0; (_r)->srp = 0; \
+} while (0)
+
+/* The additional layer below is because the stack pointer is missing in 
+   the pt_regs struct, but needed in a core dump. pr_reg is a elf_gregset_t,
+   and should be filled in according to the layout of the user_regs_struct
+   struct; regs is a pt_regs struct. We dump all registers, though several are
+   obviously unnecessary. That way there's less need for intelligence at 
+   the receiving end (i.e. gdb). */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)                   \
+	pr_reg[0] = regs->r0;                              \
+	pr_reg[1] = regs->r1;                              \
+	pr_reg[2] = regs->r2;                              \
+	pr_reg[3] = regs->r3;                              \
+	pr_reg[4] = regs->r4;                              \
+	pr_reg[5] = regs->r5;                              \
+	pr_reg[6] = regs->r6;                              \
+	pr_reg[7] = regs->r7;                              \
+	pr_reg[8] = regs->r8;                              \
+	pr_reg[9] = regs->r9;                              \
+	pr_reg[10] = regs->r10;                            \
+	pr_reg[11] = regs->r11;                            \
+	pr_reg[12] = regs->r12;                            \
+	pr_reg[13] = regs->r13;                            \
+	pr_reg[14] = rdusp();               /* sp */       \
+	pr_reg[15] = regs->irp;             /* pc */       \
+	pr_reg[16] = 0;                     /* p0 */       \
+	pr_reg[17] = rdvr();                /* vr */       \
+	pr_reg[18] = 0;                     /* p2 */       \
+	pr_reg[19] = 0;                     /* p3 */       \
+	pr_reg[20] = 0;                     /* p4 */       \
+	pr_reg[21] = (regs->dccr & 0xffff); /* ccr */      \
+	pr_reg[22] = 0;                     /* p6 */       \
+	pr_reg[23] = regs->mof;             /* mof */      \
+	pr_reg[24] = 0;                     /* p8 */       \
+	pr_reg[25] = 0;                     /* ibr */      \
+	pr_reg[26] = 0;                     /* irp */      \
+	pr_reg[27] = regs->srp;             /* srp */      \
+	pr_reg[28] = 0;                     /* bar */      \
+	pr_reg[29] = regs->dccr;            /* dccr */     \
+	pr_reg[30] = 0;                     /* brp */      \
+	pr_reg[31] = rdusp();               /* usp */      \
+	pr_reg[32] = 0;                     /* csrinstr */ \
+	pr_reg[33] = 0;                     /* csraddr */  \
+	pr_reg[34] = 0;                     /* csrdata */
+
+
+#endif
diff --git a/kernel/arch/cris/include/uapi/asm/elf_v32.h b/kernel/arch/cris/include/uapi/asm/elf_v32.h
new file mode 100644
index 000000000..f09fe4900
--- /dev/null
+++ b/kernel/arch/cris/include/uapi/asm/elf_v32.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_CRIS_ELF_H
+#define _ASM_CRIS_ELF_H
+
+#define ELF_CORE_EFLAGS EF_CRIS_VARIANT_V32
+
+/* Matches struct user_regs_struct */
+#define ELF_NGREG 32
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)			\
+ ((x)->e_machine == EM_CRIS			\
+  && ((((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_V32	\
+      || (((x)->e_flags & EF_CRIS_VARIANT_MASK) == EF_CRIS_VARIANT_COMMON_V10_V32))))
+
+/* CRISv32 ELF register definitions. */
+
+#include <asm/ptrace.h>
+
+/* Explicitly zero out registers to increase determinism. */
+#define ELF_PLAT_INIT(_r, load_addr)    do { \
+        (_r)->r13 = 0; (_r)->r12 = 0; (_r)->r11 = 0; (_r)->r10 = 0; \
+        (_r)->r9 = 0;  (_r)->r8 = 0;  (_r)->r7 = 0;  (_r)->r6 = 0;  \
+        (_r)->r5 = 0;  (_r)->r4 = 0;  (_r)->r3 = 0;  (_r)->r2 = 0;  \
+        (_r)->r1 = 0;  (_r)->r0 = 0;  (_r)->mof = 0; (_r)->srp = 0; \
+        (_r)->acr = 0; \
+} while (0)
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec_binary(ex, have_pt_gnu_stack)	(!(have_pt_gnu_stack))
+
+/*
+ * This is basically a pt_regs with the additional definition
+ * of the stack pointer since it's needed in a core dump.
+ * pr_regs is a elf_gregset_t and should be filled according
+ * to the layout of user_regs_struct.
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)                   \
+        pr_reg[0] = regs->r0;                              \
+        pr_reg[1] = regs->r1;                              \
+        pr_reg[2] = regs->r2;                              \
+        pr_reg[3] = regs->r3;                              \
+        pr_reg[4] = regs->r4;                              \
+        pr_reg[5] = regs->r5;                              \
+        pr_reg[6] = regs->r6;                              \
+        pr_reg[7] = regs->r7;                              \
+        pr_reg[8] = regs->r8;                              \
+        pr_reg[9] = regs->r9;                              \
+        pr_reg[10] = regs->r10;                            \
+        pr_reg[11] = regs->r11;                            \
+        pr_reg[12] = regs->r12;                            \
+        pr_reg[13] = regs->r13;                            \
+        pr_reg[14] = rdusp();               /* SP */       \
+        pr_reg[15] = regs->acr;             /* ACR */      \
+        pr_reg[16] = 0;                     /* BZ */       \
+        pr_reg[17] = rdvr();                /* VR */       \
+        pr_reg[18] = 0;                     /* PID */      \
+        pr_reg[19] = regs->srs;             /* SRS */      \
+        pr_reg[20] = 0;                     /* WZ */       \
+        pr_reg[21] = regs->exs;             /* EXS */      \
+        pr_reg[22] = regs->eda;             /* EDA */      \
+        pr_reg[23] = regs->mof;             /* MOF */      \
+        pr_reg[24] = 0;                     /* DZ */       \
+        pr_reg[25] = 0;                     /* EBP */      \
+        pr_reg[26] = regs->erp;             /* ERP */      \
+        pr_reg[27] = regs->srp;             /* SRP */      \
+        pr_reg[28] = 0;                     /* NRP */      \
+        pr_reg[29] = regs->ccs;             /* CCS */      \
+        pr_reg[30] = rdusp();               /* USP */      \
+        pr_reg[31] = regs->spc;             /* SPC */      \
+
+#endif /* _ASM_CRIS_ELF_H */
diff --git a/kernel/arch/cris/include/uapi/asm/errno.h b/kernel/arch/cris/include/uapi/asm/errno.h
deleted file mode 100644
index 2bf5eb5fa..000000000
--- a/kernel/arch/cris/include/uapi/asm/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _CRIS_ERRNO_H
-#define _CRIS_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif
diff --git a/kernel/arch/cris/include/uapi/asm/etraxgpio.h b/kernel/arch/cris/include/uapi/asm/etraxgpio.h
index 461c089db..c6e7d57c8 100644
--- a/kernel/arch/cris/include/uapi/asm/etraxgpio.h
+++ b/kernel/arch/cris/include/uapi/asm/etraxgpio.h
@@ -11,26 +11,6 @@
  *       g1-g7 and g25-g31 is both input and outputs but on different pins
  *       Also note that some bits change pins depending on what interfaces
  *       are enabled.
- *
- * For ETRAX FS (CONFIG_ETRAXFS):
- * /dev/gpioa  minor 0,  8 bit GPIO, each bit can change direction
- * /dev/gpiob  minor 1, 18 bit GPIO, each bit can change direction
- * /dev/gpioc  minor 3, 18 bit GPIO, each bit can change direction
- * /dev/gpiod  minor 4, 18 bit GPIO, each bit can change direction
- * /dev/gpioe  minor 5, 18 bit GPIO, each bit can change direction
- * /dev/leds   minor 2, Access to leds depending on kernelconfig
- *
- * For ARTPEC-3 (CONFIG_CRIS_MACH_ARTPEC3):
- * /dev/gpioa  minor 0, 32 bit GPIO, each bit can change direction
- * /dev/gpiob  minor 1, 32 bit GPIO, each bit can change direction
- * /dev/gpioc  minor 3, 16 bit GPIO, each bit can change direction
- * /dev/gpiod  minor 4, 32 bit GPIO, input only
- * /dev/leds   minor 2, Access to leds depending on kernelconfig
- * /dev/pwm0   minor 16, PWM channel 0 on PA30
- * /dev/pwm1   minor 17, PWM channel 1 on PA31
- * /dev/pwm2   minor 18, PWM channel 2 on PB26
- * /dev/ppwm   minor 19, PPWM channel
- *
  */
 #ifndef _ASM_ETRAXGPIO_H
 #define _ASM_ETRAXGPIO_H
@@ -40,52 +20,12 @@
 #define ETRAXGPIO_IOCTYPE 43
 
 /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */
-#ifdef CONFIG_ETRAX_ARCH_V10
 #define GPIO_MINOR_A 0
 #define GPIO_MINOR_B 1
 #define GPIO_MINOR_LEDS 2
 #define GPIO_MINOR_G 3
 #define GPIO_MINOR_LAST 3
 #define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
-#endif
-
-#ifdef CONFIG_ETRAXFS
-#define GPIO_MINOR_A 0
-#define GPIO_MINOR_B 1
-#define GPIO_MINOR_LEDS 2
-#define GPIO_MINOR_C 3
-#define GPIO_MINOR_D 4
-#define GPIO_MINOR_E 5
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#define GPIO_MINOR_V 6
-#define GPIO_MINOR_LAST 6
-#else
-#define GPIO_MINOR_LAST 5
-#endif
-#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST
-#endif
-
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#define GPIO_MINOR_A 0
-#define GPIO_MINOR_B 1
-#define GPIO_MINOR_LEDS 2
-#define GPIO_MINOR_C 3
-#define GPIO_MINOR_D 4
-#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-#define GPIO_MINOR_V 6
-#define GPIO_MINOR_LAST 6
-#else
-#define GPIO_MINOR_LAST 4
-#endif
-#define GPIO_MINOR_FIRST_PWM 16
-#define GPIO_MINOR_PWM0 (GPIO_MINOR_FIRST_PWM+0)
-#define GPIO_MINOR_PWM1 (GPIO_MINOR_FIRST_PWM+1)
-#define GPIO_MINOR_PWM2 (GPIO_MINOR_FIRST_PWM+2)
-#define GPIO_MINOR_PPWM (GPIO_MINOR_FIRST_PWM+3)
-#define GPIO_MINOR_LAST_PWM GPIO_MINOR_PPWM
-#define GPIO_MINOR_LAST_REAL GPIO_MINOR_LAST_PWM
-#endif
-
 
 
 /* supported ioctl _IOC_NR's */
@@ -139,101 +79,4 @@
 #define IO_SETGET_OUTPUT 0x13 /* bits set in *arg is set to output, */
 			      /* *arg updated with current output pins. */
 
-/* The following ioctl's are applicable to the PWM channels only */
-
-#define IO_PWM_SET_MODE     0x20
-
-enum io_pwm_mode {
-	PWM_OFF = 0,		/* disabled, deallocated */
-	PWM_STANDARD = 1,	/* 390 kHz, duty cycle 0..255/256 */
-	PWM_FAST = 2,		/* variable freq, w/ 10ns active pulse len */
-	PWM_VARFREQ = 3,	/* individually configurable high/low periods */
-	PWM_SOFT = 4		/* software generated */
-};
-
-struct io_pwm_set_mode {
-	enum io_pwm_mode mode;
-};
-
-/* Only for mode PWM_VARFREQ. Period lo/high set in increments of 10ns
- * from 10ns (value = 0) to 81920ns (value = 8191)
- * (Resulting frequencies range from 50 MHz (10ns + 10ns) down to
- * 6.1 kHz (81920ns + 81920ns) at 50% duty cycle, to 12.2 kHz at min/max duty
- * cycle (81920 + 10ns or 10ns + 81920ns, respectively).)
- */
-#define IO_PWM_SET_PERIOD   0x21
-
-struct io_pwm_set_period {
-	unsigned int lo;		/* 0..8191 */
-	unsigned int hi;		/* 0..8191 */
-};
-
-/* Only for modes PWM_STANDARD and PWM_FAST.
- * For PWM_STANDARD, set duty cycle of 390 kHz PWM output signal, from
- * 0 (value = 0) to 255/256 (value = 255).
- * For PWM_FAST, set duty cycle of PWM output signal from
- * 0% (value = 0) to 100% (value = 255). Output signal in this mode
- * is a 10ns pulse surrounded by a high or low level depending on duty
- * cycle (except for 0% and 100% which result in a constant output).
- * Resulting output frequency varies from 50 MHz at 50% duty cycle,
- * down to 390 kHz at min/max duty cycle.
- */
-#define IO_PWM_SET_DUTY     0x22
-
-struct io_pwm_set_duty {
-	int duty;		/* 0..255 */
-};
-
-/* Returns information about the latest PWM pulse.
- * lo: Length of the latest low period, in units of 10ns.
- * hi: Length of the latest high period, in units of 10ns.
- * cnt: Time since last detected edge, in units of 10ns.
- *
- * The input source to PWM is decied by IO_PWM_SET_INPUT_SRC.
- *
- * NOTE: All PWM devices is connected to the same input source.
- */
-#define IO_PWM_GET_PERIOD   0x23
-
-struct io_pwm_get_period {
-	unsigned int lo;
-	unsigned int hi;
-	unsigned int cnt;
-};
-
-/* Sets the input source for the PWM input. For the src value see the
- * register description for gio:rw_pwm_in_cfg.
- *
- * NOTE: All PWM devices is connected to the same input source.
- */
-#define IO_PWM_SET_INPUT_SRC   0x24
-struct io_pwm_set_input_src {
-	unsigned int src;	/* 0..7 */
-};
-
-/* Sets the duty cycles in steps of 1/256, 0 = 0%, 255 = 100% duty cycle */
-#define IO_PPWM_SET_DUTY     0x25
-
-struct io_ppwm_set_duty {
-	int duty;		/* 0..255 */
-};
-
-/* Configuraton struct for the IO_PWMCLK_SET_CONFIG ioctl to configure
- * PWM capable gpio pins:
- */
-#define IO_PWMCLK_SETGET_CONFIG 0x26
-struct gpio_pwmclk_conf {
-  unsigned int gpiopin; /* The pin number based on the opened device */
-  unsigned int baseclk; /* The base clock to use, or sw will select one close*/
-  unsigned int low;     /* The number of low periods of the baseclk */
-  unsigned int high;    /* The number of high periods of the baseclk */
-};
-
-/* Examples:
- * To get a symmetric 12 MHz clock without knowing anything about the hardware:
- * baseclk = 12000000, low = 0, high = 0
- * To just get info of current setting:
- * baseclk = 0, low = 0, high = 0, the values will be updated by driver.
- */
-
 #endif
diff --git a/kernel/arch/cris/include/uapi/asm/fcntl.h b/kernel/arch/cris/include/uapi/asm/fcntl.h
deleted file mode 100644
index 46ab12db5..000000000
--- a/kernel/arch/cris/include/uapi/asm/fcntl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>
diff --git a/kernel/arch/cris/include/uapi/asm/ioctl.h b/kernel/arch/cris/include/uapi/asm/ioctl.h
deleted file mode 100644
index b279fe06d..000000000
--- a/kernel/arch/cris/include/uapi/asm/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/kernel/arch/cris/include/uapi/asm/ipcbuf.h b/kernel/arch/cris/include/uapi/asm/ipcbuf.h
deleted file mode 100644
index 84c7e51cb..000000000
--- a/kernel/arch/cris/include/uapi/asm/ipcbuf.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>
diff --git a/kernel/arch/cris/include/uapi/asm/kvm_para.h b/kernel/arch/cris/include/uapi/asm/kvm_para.h
deleted file mode 100644
index 14fab8f0b..000000000
--- a/kernel/arch/cris/include/uapi/asm/kvm_para.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>
diff --git a/kernel/arch/cris/include/uapi/asm/mman.h b/kernel/arch/cris/include/uapi/asm/mman.h
deleted file mode 100644
index 8eebf89f5..000000000
--- a/kernel/arch/cris/include/uapi/asm/mman.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/mman.h>
diff --git a/kernel/arch/cris/include/uapi/asm/msgbuf.h b/kernel/arch/cris/include/uapi/asm/msgbuf.h
deleted file mode 100644
index ada63df1d..000000000
--- a/kernel/arch/cris/include/uapi/asm/msgbuf.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef _CRIS_MSGBUF_H
-#define _CRIS_MSGBUF_H
-
-/* verbatim copy of asm-i386 version */
-
-/* 
- * The msqid64_ds structure for CRIS architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-	unsigned long	__unused1;
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-	unsigned long	__unused2;
-	__kernel_time_t msg_ctime;	/* last change time */
-	unsigned long	__unused3;
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* _CRIS_MSGBUF_H */
diff --git a/kernel/arch/cris/include/uapi/asm/poll.h b/kernel/arch/cris/include/uapi/asm/poll.h
deleted file mode 100644
index c98509d31..000000000
--- a/kernel/arch/cris/include/uapi/asm/poll.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/poll.h>
diff --git a/kernel/arch/cris/include/uapi/asm/ptrace.h b/kernel/arch/cris/include/uapi/asm/ptrace.h
index c689c9bbb..bd8946f83 100644
--- a/kernel/arch/cris/include/uapi/asm/ptrace.h
+++ b/kernel/arch/cris/include/uapi/asm/ptrace.h
@@ -1 +1,5 @@
-#include <arch/ptrace.h>
+#ifdef __arch_v32
+#include <asm/ptrace_v32.h>
+#else
+#include <asm/ptrace_v10.h>
+#endif
diff --git a/kernel/arch/cris/include/uapi/asm/ptrace_v10.h b/kernel/arch/cris/include/uapi/asm/ptrace_v10.h
new file mode 100644
index 000000000..1a2327395
--- /dev/null
+++ b/kernel/arch/cris/include/uapi/asm/ptrace_v10.h
@@ -0,0 +1,118 @@
+#ifndef _CRIS_ARCH_PTRACE_H
+#define _CRIS_ARCH_PTRACE_H
+
+/* Frame types */
+
+#define CRIS_FRAME_NORMAL   0 /* normal frame without SBFS stacking */
+#define CRIS_FRAME_BUSFAULT 1 /* frame stacked using SBFS, need RBF return
+				 path */
+
+/* Register numbers in the ptrace system call interface */
+
+#define PT_FRAMETYPE 0
+#define PT_ORIG_R10  1
+#define PT_R13       2
+#define PT_R12       3
+#define PT_R11       4
+#define PT_R10       5
+#define PT_R9        6
+#define PT_R8        7
+#define PT_R7        8
+#define PT_R6        9
+#define PT_R5        10
+#define PT_R4        11
+#define PT_R3        12
+#define PT_R2        13
+#define PT_R1        14
+#define PT_R0        15
+#define PT_MOF       16
+#define PT_DCCR      17
+#define PT_SRP       18
+#define PT_IRP       19    /* This is actually the debugged process' PC */
+#define PT_CSRINSTR  20    /* CPU Status record remnants -
+			      valid if frametype == busfault */
+#define PT_CSRADDR   21
+#define PT_CSRDATA   22
+#define PT_USP       23    /* special case - USP is not in the pt_regs */
+#define PT_MAX       23
+
+/* Condition code bit numbers.  The same numbers apply to CCR of course,
+   but we use DCCR everywhere else, so let's try and be consistent.  */
+#define C_DCCR_BITNR 0
+#define V_DCCR_BITNR 1
+#define Z_DCCR_BITNR 2
+#define N_DCCR_BITNR 3
+#define X_DCCR_BITNR 4
+#define I_DCCR_BITNR 5
+#define B_DCCR_BITNR 6
+#define M_DCCR_BITNR 7
+#define U_DCCR_BITNR 8
+#define P_DCCR_BITNR 9
+#define F_DCCR_BITNR 10
+
+/* pt_regs not only specifices the format in the user-struct during
+ * ptrace but is also the frame format used in the kernel prologue/epilogues 
+ * themselves
+ */
+
+struct pt_regs {
+	unsigned long frametype;  /* type of stackframe */
+	unsigned long orig_r10;
+	/* pushed by movem r13, [sp] in SAVE_ALL, movem pushes backwards */
+	unsigned long r13;
+	unsigned long r12;
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+	unsigned long mof;
+	unsigned long dccr;
+	unsigned long srp;
+	unsigned long irp; /* This is actually the debugged process' PC */
+	unsigned long csrinstr;
+	unsigned long csraddr;
+	unsigned long csrdata;
+};
+
+/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S)
+ * when doing a context-switch. it is used (apart from in resume) when a new
+ * thread is made and we need to make _resume (which is starting it for the
+ * first time) realise what is going on.
+ *
+ * Actually, the use is very close to the thread struct (TSS) in that both the
+ * switch_stack and the TSS are used to keep thread stuff when switching in
+ * _resume.
+ */
+
+struct switch_stack {
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+	unsigned long return_ip; /* ip that _resume will return to */
+};
+
+#ifdef __KERNEL__
+
+/* bit 8 is user-mode flag */
+#define user_mode(regs) (((regs)->dccr & 0x100) != 0)
+#define instruction_pointer(regs) ((regs)->irp)
+#define profile_pc(regs) instruction_pointer(regs)
+
+#endif  /*  __KERNEL__  */
+
+#endif
diff --git a/kernel/arch/cris/include/uapi/asm/ptrace_v32.h b/kernel/arch/cris/include/uapi/asm/ptrace_v32.h
new file mode 100644
index 000000000..19773d3bd
--- /dev/null
+++ b/kernel/arch/cris/include/uapi/asm/ptrace_v32.h
@@ -0,0 +1,118 @@
+#ifndef _CRIS_ARCH_PTRACE_H
+#define _CRIS_ARCH_PTRACE_H
+
+/* Register numbers in the ptrace system call interface */
+
+#define PT_ORIG_R10  0
+#define PT_R0        1
+#define PT_R1        2
+#define PT_R2        3
+#define PT_R3        4
+#define PT_R4        5
+#define PT_R5        6
+#define PT_R6        7
+#define PT_R7        8
+#define PT_R8        9
+#define PT_R9        10
+#define PT_R10       11
+#define PT_R11       12
+#define PT_R12       13
+#define PT_R13       14
+#define PT_ACR       15
+#define PT_SRS       16
+#define PT_MOF       17
+#define PT_SPC       18
+#define PT_CCS       19
+#define PT_SRP       20
+#define PT_ERP       21    /* This is actually the debugged process' PC */
+#define PT_EXS       22
+#define PT_EDA       23
+#define PT_USP       24    /* special case - USP is not in the pt_regs */
+#define PT_PPC       25    /* special case - pseudo PC */
+#define PT_BP        26    /* Base number for BP registers. */
+#define PT_BP_CTRL   26    /* BP control register. */
+#define PT_MAX       40
+
+/* Condition code bit numbers. */
+#define C_CCS_BITNR 0
+#define V_CCS_BITNR 1
+#define Z_CCS_BITNR 2
+#define N_CCS_BITNR 3
+#define X_CCS_BITNR 4
+#define I_CCS_BITNR 5
+#define U_CCS_BITNR 6
+#define P_CCS_BITNR 7
+#define R_CCS_BITNR 8
+#define S_CCS_BITNR 9
+#define M_CCS_BITNR 30
+#define Q_CCS_BITNR 31
+#define CCS_SHIFT   10 /* Shift count for each level in CCS */
+
+/* pt_regs not only specifices the format in the user-struct during
+ * ptrace but is also the frame format used in the kernel prologue/epilogues
+ * themselves
+ */
+
+struct pt_regs {
+	unsigned long orig_r10;
+	/* pushed by movem r13, [sp] in SAVE_ALL. */
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long r10;
+	unsigned long r11;
+	unsigned long r12;
+	unsigned long r13;
+	unsigned long acr;
+	unsigned long srs;
+	unsigned long mof;
+	unsigned long spc;
+	unsigned long ccs;
+	unsigned long srp;
+	unsigned long erp; /* This is actually the debugged process' PC */
+	/* For debugging purposes; saved only when needed. */
+	unsigned long exs;
+	unsigned long eda;
+};
+
+/* switch_stack is the extra stuff pushed onto the stack in _resume (entry.S)
+ * when doing a context-switch. it is used (apart from in resume) when a new
+ * thread is made and we need to make _resume (which is starting it for the
+ * first time) realise what is going on.
+ *
+ * Actually, the use is very close to the thread struct (TSS) in that both the
+ * switch_stack and the TSS are used to keep thread stuff when switching in
+ * _resume.
+ */
+
+struct switch_stack {
+	unsigned long r0;
+	unsigned long r1;
+	unsigned long r2;
+	unsigned long r3;
+	unsigned long r4;
+	unsigned long r5;
+	unsigned long r6;
+	unsigned long r7;
+	unsigned long r8;
+	unsigned long r9;
+	unsigned long return_ip; /* ip that _resume will return to */
+};
+
+#ifdef __KERNEL__
+
+#define arch_has_single_step() (1)
+#define user_mode(regs) (((regs)->ccs & (1 << (U_CCS_BITNR + CCS_SHIFT))) != 0)
+#define instruction_pointer(regs) ((regs)->erp)
+#define profile_pc(regs) instruction_pointer(regs)
+
+#endif  /*  __KERNEL__  */
+
+#endif
diff --git a/kernel/arch/cris/include/uapi/asm/resource.h b/kernel/arch/cris/include/uapi/asm/resource.h
deleted file mode 100644
index b5d29448d..000000000
--- a/kernel/arch/cris/include/uapi/asm/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _CRIS_RESOURCE_H
-#define _CRIS_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif
diff --git a/kernel/arch/cris/include/uapi/asm/sembuf.h b/kernel/arch/cris/include/uapi/asm/sembuf.h
deleted file mode 100644
index 7fed98437..000000000
--- a/kernel/arch/cris/include/uapi/asm/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef _CRIS_SEMBUF_H
-#define _CRIS_SEMBUF_H
-
-/* 
- * The semid64_ds structure for CRIS architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
-	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
-	__kernel_time_t	sem_otime;		/* last semop time */
-	unsigned long	__unused1;
-	__kernel_time_t	sem_ctime;		/* last change time */
-	unsigned long	__unused2;
-	unsigned long	sem_nsems;		/* no. of semaphores in array */
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _CRIS_SEMBUF_H */
diff --git a/kernel/arch/cris/include/uapi/asm/shmbuf.h b/kernel/arch/cris/include/uapi/asm/shmbuf.h
deleted file mode 100644
index 3239e3f00..000000000
--- a/kernel/arch/cris/include/uapi/asm/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _CRIS_SHMBUF_H
-#define _CRIS_SHMBUF_H
-
-/* 
- * The shmid64_ds structure for CRIS architecture (same as for i386)
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-	unsigned long		__unused1;
-	__kernel_time_t		shm_dtime;	/* last detach time */
-	unsigned long		__unused2;
-	__kernel_time_t		shm_ctime;	/* last change time */
-	unsigned long		__unused3;
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* _CRIS_SHMBUF_H */
diff --git a/kernel/arch/cris/include/uapi/asm/siginfo.h b/kernel/arch/cris/include/uapi/asm/siginfo.h
deleted file mode 100644
index c1cd6d169..000000000
--- a/kernel/arch/cris/include/uapi/asm/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _CRIS_SIGINFO_H
-#define _CRIS_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif
diff --git a/kernel/arch/cris/include/uapi/asm/socket.h b/kernel/arch/cris/include/uapi/asm/socket.h
deleted file mode 100644
index e2503d9f1..000000000
--- a/kernel/arch/cris/include/uapi/asm/socket.h
+++ /dev/null
@@ -1,92 +0,0 @@
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-/* almost the same as asm-i386/socket.h */
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-#define SO_REUSEPORT	15
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
-#define SO_GET_FILTER		SO_ATTACH_FILTER
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP           29
-#define SCM_TIMESTAMP          SO_TIMESTAMP
-
-#define SO_ACCEPTCONN          30
-
-#define SO_PEERSEC             31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#define SO_PROTOCOL		38
-#define SO_DOMAIN		39
-
-#define SO_RXQ_OVFL             40
-
-#define SO_WIFI_STATUS		41
-#define SCM_WIFI_STATUS		SO_WIFI_STATUS
-#define SO_PEEK_OFF		42
-
-/* Instruct lower device to use last 4-bytes of skb data as FCS */
-#define SO_NOFCS		43
-
-#define SO_LOCK_FILTER		44
-
-#define SO_SELECT_ERR_QUEUE	45
-
-#define SO_BUSY_POLL		46
-
-#define SO_MAX_PACING_RATE	47
-
-#define SO_BPF_EXTENSIONS	48
-
-#define SO_INCOMING_CPU		49
-
-#define SO_ATTACH_BPF		50
-#define SO_DETACH_BPF		SO_DETACH_FILTER
-
-#endif /* _ASM_SOCKET_H */
-
-
diff --git a/kernel/arch/cris/include/uapi/asm/sockios.h b/kernel/arch/cris/include/uapi/asm/sockios.h
deleted file mode 100644
index cfe7bfecf..000000000
--- a/kernel/arch/cris/include/uapi/asm/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __ARCH_CRIS_SOCKIOS__
-#define __ARCH_CRIS_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif
diff --git a/kernel/arch/cris/include/uapi/asm/statfs.h b/kernel/arch/cris/include/uapi/asm/statfs.h
deleted file mode 100644
index fdaf92184..000000000
--- a/kernel/arch/cris/include/uapi/asm/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _CRIS_STATFS_H
-#define _CRIS_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif
diff --git a/kernel/arch/cris/include/uapi/asm/types.h b/kernel/arch/cris/include/uapi/asm/types.h
deleted file mode 100644
index 9ec9d4c5a..000000000
--- a/kernel/arch/cris/include/uapi/asm/types.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/int-ll64.h>
diff --git a/kernel/arch/cris/include/uapi/asm/unistd.h b/kernel/arch/cris/include/uapi/asm/unistd.h
index f3287face..062b648b2 100644
--- a/kernel/arch/cris/include/uapi/asm/unistd.h
+++ b/kernel/arch/cris/include/uapi/asm/unistd.h
@@ -356,5 +356,13 @@
 #define __NR_process_vm_writev	349
 #define __NR_kcmp		350
 #define __NR_finit_module	351
+#define __NR_sched_setattr	352
+#define __NR_sched_getattr	353
+#define __NR_renameat2		354
+#define __NR_seccomp		355
+#define __NR_getrandom		356
+#define __NR_memfd_create	357
+#define __NR_bpf		358
+#define __NR_execveat		359
 
 #endif /* _UAPI_ASM_CRIS_UNISTD_H_ */