Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 178 insertions, 0 deletions

diff --git a/kernel/arch/blackfin/include/asm/entry.h b/kernel/arch/blackfin/include/asm/entry.h
new file mode 100644
index 000000000..4104d5783
--- /dev/null
+++ b/kernel/arch/blackfin/include/asm/entry.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_ENTRY_H
+#define __BFIN_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+
+#define	LFLUSH_I_AND_D	0x00000808
+#define	LSIGTRAP	5
+
+/*
+ * NOTE!  The single-stepping code assumes that all interrupt handlers
+ * start by saving SYSCFG on the stack with their first instruction.
+ */
+
+/* This one is used for exceptions, emulation, and NMI.  It doesn't push
+   RETI and doesn't do cli.  */
+#define SAVE_ALL_SYS		save_context_no_interrupts
+/* This is used for all normal interrupts.  It saves a minimum of registers
+   to the stack, loads the IRQ number, and jumps to common code.  */
+#ifdef CONFIG_IPIPE
+# define LOAD_IPIPE_IPEND \
+	P0.l = lo(IPEND); \
+	P0.h = hi(IPEND); \
+	R1 = [P0];
+#else
+# define LOAD_IPIPE_IPEND
+#endif
+
+/*
+ * Workaround for anomalies 05000283 and 05000315
+ */
+#if ANOMALY_05000283 || ANOMALY_05000315
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)		\
+	cc = dreg == dreg;				\
+	preg.h = HI(CHIPID);				\
+	preg.l = LO(CHIPID);				\
+	if cc jump 1f;					\
+	dreg.l = W[preg];				\
+1:
+#else
+# define ANOMALY_283_315_WORKAROUND(preg, dreg)
+#endif /* ANOMALY_05000283 || ANOMALY_05000315 */
+
+#ifndef CONFIG_EXACT_HWERR
+/* As a debugging aid - we save IPEND when DEBUG_KERNEL is on,
+ * otherwise it is a waste of cycles.
+ */
+# ifndef CONFIG_DEBUG_KERNEL
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# else /* CONFIG_DEBUG_KERNEL */
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;
+# endif /* CONFIG_DEBUG_KERNEL */
+
+/* For timer interrupts, we need to save IPEND, since the user_mode
+ *macro accesses it to determine where to account time.
+ */
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;
+#else /* CONFIG_EXACT_HWERR is defined */
+
+/* if we want hardware error to be exact, we need to do a SSYNC (which forces
+ * read/writes to complete to the memory controllers), and check to see that
+ * caused a pending HW error condition. If so, we assume it was caused by user
+ * space, by setting the same interrupt that we are in (so it goes off again)
+ * and context restore, and a RTI (without servicing anything). This should
+ * cause the pending HWERR to fire, and when that is done, this interrupt will
+ * be re-serviced properly.
+ * As you can see by the code - we actually need to do two SSYNCS - one to
+ * make sure the read/writes complete, and another to make sure the hardware
+ * error is recognized by the core.
+ *
+ * The extra nop before the SSYNC is to make sure we work around 05000244,
+ * since the 283/315 workaround includes a branch to the end
+ */
+#define INTERRUPT_ENTRY(N)						\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    LOAD_IPIPE_IPEND							\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+
+#define TIMER_INTERRUPT_ENTRY(N)					\
+    [--sp] = SYSCFG;							\
+    [--sp] = P0;	/*orig_p0*/					\
+    [--sp] = R0;	/*orig_r0*/					\
+    [--sp] = (R7:0,P5:0);						\
+    R1 = ASTAT;								\
+    ANOMALY_283_315_WORKAROUND(p0, r0)					\
+    P0.L = LO(ILAT);							\
+    P0.H = HI(ILAT);							\
+    NOP;								\
+    SSYNC;								\
+    SSYNC;								\
+    R0 = [P0];								\
+    CC = BITTST(R0, EVT_IVHW_P);					\
+    IF CC JUMP 1f;							\
+    ASTAT = R1;								\
+    p0.l = lo(IPEND);							\
+    p0.h = hi(IPEND);							\
+    r1 = [p0];								\
+    R0 = (N);								\
+    jump __common_int_entry;						\
+1:  ASTAT = R1;								\
+    RAISE N;								\
+    (R7:0, P5:0) = [SP++];						\
+    SP += 0x8;								\
+    SYSCFG = [SP++];							\
+    CSYNC;								\
+    RTI;
+#endif	/* CONFIG_EXACT_HWERR */
+
+/* This one pushes RETI without using CLI.  Interrupts are enabled.  */
+#define SAVE_CONTEXT_SYSCALL	save_context_syscall
+#define SAVE_CONTEXT		save_context_with_interrupts
+#define SAVE_CONTEXT_CPLB	save_context_cplb
+
+#define RESTORE_ALL_SYS		restore_context_no_interrupts
+#define RESTORE_CONTEXT		restore_context_with_interrupts
+#define RESTORE_CONTEXT_CPLB	restore_context_cplb
+
+#endif				/* __ASSEMBLY__ */
+#endif				/* __BFIN_ENTRY_H */