Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

7 files changed, 1541 insertions, 0 deletions

diff --git a/kernel/arch/arm/plat-pxa/Kconfig b/kernel/arch/arm/plat-pxa/Kconfig
new file mode 100644
index 000000000..da53395a1
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/Kconfig
@@ -0,0 +1,8 @@
+if PLAT_PXA
+
+config PXA_SSP
+	tristate
+	help
+	  Enable support for PXA2xx SSP ports
+
+endif
diff --git a/kernel/arch/arm/plat-pxa/Makefile b/kernel/arch/arm/plat-pxa/Makefile
new file mode 100644
index 000000000..1fc941944
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for code common across different PXA processor families
+#
+
+obj-y	:= dma.o
+
+obj-$(CONFIG_PXA3xx)		+= mfp.o
+obj-$(CONFIG_ARCH_MMP)		+= mfp.o
+
+obj-$(CONFIG_PXA_SSP)		+= ssp.o
diff --git a/kernel/arch/arm/plat-pxa/dma.c b/kernel/arch/arm/plat-pxa/dma.c
new file mode 100644
index 000000000..d92f07f6e
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/dma.c
@@ -0,0 +1,386 @@
+/*
+ *  linux/arch/arm/plat-pxa/dma.c
+ *
+ *  PXA DMA registration and IRQ dispatching
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <mach/dma.h>
+
+#define DMA_DEBUG_NAME		"pxa_dma"
+#define DMA_MAX_REQUESTERS	64
+
+struct dma_channel {
+	char *name;
+	pxa_dma_prio prio;
+	void (*irq_handler)(int, void *);
+	void *data;
+	spinlock_t lock;
+};
+
+static struct dma_channel *dma_channels;
+static int num_dma_channels;
+
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+	int chan = (int)s->private;
+	int i;
+	u32 drcmr;
+
+	seq_printf(s, "DMA channel %d requesters list :\n", chan);
+	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+		drcmr = DRCMR(i);
+		if ((drcmr & DRCMR_CHLNUM) == chan)
+			seq_printf(s, "\tRequester %d (MAPVLD=%d)\n",
+				   i, !!(drcmr & DRCMR_MAPVLD));
+	}
+
+	return 0;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+	int burst = (dcmd >> 16) & 0x3;
+
+	return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+	return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+	int chan = (int)s->private;
+	int i, max_show = 20, burst, width;
+	u32 dcmd;
+	unsigned long phys_desc;
+	struct pxa_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_channels[chan].lock, flags);
+	phys_desc = DDADR(chan);
+
+	seq_printf(s, "DMA channel %d descriptors :\n", chan);
+	seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+		desc = phys_to_virt(phys_desc);
+		dcmd = desc->dcmd;
+		burst = dbg_burst_from_dcmd(dcmd);
+		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+		seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+			   i, phys_desc, desc);
+		seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+		seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+		seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+		seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
+			   dcmd,
+			   DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+			   DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+			   DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+			   DCMD_STR(ENDIAN), burst, width,
+			   dcmd & DCMD_LENGTH);
+		phys_desc = desc->ddadr;
+	}
+	if (i == max_show)
+		seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+			   i, phys_desc);
+	else
+		seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+			   i, phys_desc, phys_desc == DDADR_STOP ?
+			   "DDADR_STOP" : "invalid");
+
+	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+
+	return 0;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+	int chan = (int)s->private;
+	u32 dcsr, dcmd;
+	int burst, width;
+	static char *str_prio[] = { "high", "normal", "low" };
+
+	dcsr = DCSR(chan);
+	dcmd = DCMD(chan);
+	burst = dbg_burst_from_dcmd(dcmd);
+	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+	seq_printf(s, "DMA channel %d\n", chan);
+	seq_printf(s, "\tPriority : %s\n", str_prio[dma_channels[chan].prio]);
+	seq_printf(s, "\tUnaligned transfer bit: %s\n",
+		   DALGN & (1 << chan) ? "yes" : "no");
+	seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+		   dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+		   DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+		   DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+		   DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+		   DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+		   DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+		   DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+	seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d len=%d)\n",
+		   dcmd,
+		   DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+		   DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+		   DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+		   DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+	seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+	seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+	seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+
+	return 0;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+	/* basic device status */
+	seq_puts(s, "DMA engine status\n");
+	seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+	return 0;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+	return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+	.owner		= THIS_MODULE, \
+	.open		= dbg_open_##name, \
+	.llseek		= seq_lseek, \
+	.read		= seq_read, \
+	.release	= single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+	char chan_name[11];
+	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+	struct dentry *chan_reqs = NULL;
+	void *dt;
+
+	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+	chan = debugfs_create_dir(chan_name, chandir);
+	dt = (void *)ch;
+
+	if (chan)
+		chan_state = debugfs_create_file("state", 0400, chan, dt,
+						 &dbg_fops_chan_state);
+	if (chan_state)
+		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+						 &dbg_fops_descriptors);
+	if (chan_descr)
+		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+						&dbg_fops_requester_chan);
+	if (!chan_reqs)
+		goto err_state;
+
+	return chan;
+
+err_state:
+	debugfs_remove_recursive(chan);
+	return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+	int i;
+	struct dentry *chandir;
+
+	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+	if (IS_ERR(dbgfs_root) || !dbgfs_root)
+		goto err_root;
+
+	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+					  &dbg_fops_state);
+	if (!dbgfs_state)
+		goto err_state;
+
+	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+			     GFP_KERNEL);
+	if (!dbgfs_chan)
+		goto err_alloc;
+
+	chandir = debugfs_create_dir("channels", dbgfs_root);
+	if (!chandir)
+		goto err_chandir;
+
+	for (i = 0; i < num_dma_channels; i++) {
+		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+		if (!dbgfs_chan[i])
+			goto err_chans;
+	}
+
+	return;
+err_chans:
+err_chandir:
+	kfree(dbgfs_chan);
+err_alloc:
+err_state:
+	debugfs_remove_recursive(dbgfs_root);
+err_root:
+	pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+	debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
+int pxa_request_dma (char *name, pxa_dma_prio prio,
+			void (*irq_handler)(int, void *),
+			void *data)
+{
+	unsigned long flags;
+	int i, found = 0;
+
+	/* basic sanity checks */
+	if (!name || !irq_handler)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	do {
+		/* try grabbing a DMA channel with the requested priority */
+		for (i = 0; i < num_dma_channels; i++) {
+			if ((dma_channels[i].prio == prio) &&
+			    !dma_channels[i].name) {
+				found = 1;
+				break;
+			}
+		}
+		/* if requested prio group is full, try a hier priority */
+	} while (!found && prio--);
+
+	if (found) {
+		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+		dma_channels[i].name = name;
+		dma_channels[i].irq_handler = irq_handler;
+		dma_channels[i].data = data;
+	} else {
+		printk (KERN_WARNING "No more available DMA channels for %s\n", name);
+		i = -ENODEV;
+	}
+
+	local_irq_restore(flags);
+	return i;
+}
+EXPORT_SYMBOL(pxa_request_dma);
+
+void pxa_free_dma (int dma_ch)
+{
+	unsigned long flags;
+
+	if (!dma_channels[dma_ch].name) {
+		printk (KERN_CRIT
+			"%s: trying to free channel %d which is already freed\n",
+			__func__, dma_ch);
+		return;
+	}
+
+	local_irq_save(flags);
+	DCSR(dma_ch) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+	dma_channels[dma_ch].name = NULL;
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(pxa_free_dma);
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+{
+	int i, dint = DINT;
+	struct dma_channel *channel;
+
+	while (dint) {
+		i = __ffs(dint);
+		dint &= (dint - 1);
+		channel = &dma_channels[i];
+		if (channel->name && channel->irq_handler) {
+			channel->irq_handler(i, channel->data);
+		} else {
+			/*
+			 * IRQ for an unregistered DMA channel:
+			 * let's clear the interrupts and disable it.
+			 */
+			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+int __init pxa_init_dma(int irq, int num_ch)
+{
+	int i, ret;
+
+	dma_channels = kzalloc(sizeof(struct dma_channel) * num_ch, GFP_KERNEL);
+	if (dma_channels == NULL)
+		return -ENOMEM;
+
+	/* dma channel priorities on pxa2xx processors:
+	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
+	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
+	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
+	 */
+	for (i = 0; i < num_ch; i++) {
+		DCSR(i) = 0;
+		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+		spin_lock_init(&dma_channels[i].lock);
+	}
+
+	ret = request_irq(irq, dma_irq_handler, 0, "DMA", NULL);
+	if (ret) {
+		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		kfree(dma_channels);
+		return ret;
+	}
+	num_dma_channels = num_ch;
+
+	pxa_dma_init_debugfs();
+
+	return 0;
+}
diff --git a/kernel/arch/arm/plat-pxa/include/plat/dma.h b/kernel/arch/arm/plat-pxa/include/plat/dma.h
new file mode 100644
index 000000000..a7b91dc06
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/include/plat/dma.h
@@ -0,0 +1,85 @@
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#define DMAC_REG(x)	(*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n)		DMAC_REG((n) << 2)
+#define DALGN		DMAC_REG(0x00a0)  /* DMA Alignment Register */
+#define DINT		DMAC_REG(0x00f0)  /* DMA Interrupt Register */
+#define DDADR(n)	DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n)	DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n)	DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n)		DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n)	DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+				 (((n) & 0x3f) << 2))
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int irq, int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* __PLAT_DMA_H */
diff --git a/kernel/arch/arm/plat-pxa/include/plat/mfp.h b/kernel/arch/arm/plat-pxa/include/plat/mfp.h
new file mode 100644
index 000000000..10bc4f375
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/include/plat/mfp.h
@@ -0,0 +1,475 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ *   Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 256)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+
+	MFP_PIN_GPIO128,
+	MFP_PIN_GPIO129,
+	MFP_PIN_GPIO130,
+	MFP_PIN_GPIO131,
+	MFP_PIN_GPIO132,
+	MFP_PIN_GPIO133,
+	MFP_PIN_GPIO134,
+	MFP_PIN_GPIO135,
+	MFP_PIN_GPIO136,
+	MFP_PIN_GPIO137,
+	MFP_PIN_GPIO138,
+	MFP_PIN_GPIO139,
+	MFP_PIN_GPIO140,
+	MFP_PIN_GPIO141,
+	MFP_PIN_GPIO142,
+	MFP_PIN_GPIO143,
+	MFP_PIN_GPIO144,
+	MFP_PIN_GPIO145,
+	MFP_PIN_GPIO146,
+	MFP_PIN_GPIO147,
+	MFP_PIN_GPIO148,
+	MFP_PIN_GPIO149,
+	MFP_PIN_GPIO150,
+	MFP_PIN_GPIO151,
+	MFP_PIN_GPIO152,
+	MFP_PIN_GPIO153,
+	MFP_PIN_GPIO154,
+	MFP_PIN_GPIO155,
+	MFP_PIN_GPIO156,
+	MFP_PIN_GPIO157,
+	MFP_PIN_GPIO158,
+	MFP_PIN_GPIO159,
+	MFP_PIN_GPIO160,
+	MFP_PIN_GPIO161,
+	MFP_PIN_GPIO162,
+	MFP_PIN_GPIO163,
+	MFP_PIN_GPIO164,
+	MFP_PIN_GPIO165,
+	MFP_PIN_GPIO166,
+	MFP_PIN_GPIO167,
+	MFP_PIN_GPIO168,
+	MFP_PIN_GPIO169,
+	MFP_PIN_GPIO170,
+	MFP_PIN_GPIO171,
+	MFP_PIN_GPIO172,
+	MFP_PIN_GPIO173,
+	MFP_PIN_GPIO174,
+	MFP_PIN_GPIO175,
+	MFP_PIN_GPIO176,
+	MFP_PIN_GPIO177,
+	MFP_PIN_GPIO178,
+	MFP_PIN_GPIO179,
+	MFP_PIN_GPIO180,
+	MFP_PIN_GPIO181,
+	MFP_PIN_GPIO182,
+	MFP_PIN_GPIO183,
+	MFP_PIN_GPIO184,
+	MFP_PIN_GPIO185,
+	MFP_PIN_GPIO186,
+	MFP_PIN_GPIO187,
+	MFP_PIN_GPIO188,
+	MFP_PIN_GPIO189,
+	MFP_PIN_GPIO190,
+	MFP_PIN_GPIO191,
+
+	MFP_PIN_GPIO255 = 255,
+
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+	MFP_PIN_DF_nCS0_SM_nCS2,
+	MFP_PIN_DF_nCS1_SM_nCS3,
+	MFP_PIN_SM_nCS0,
+	MFP_PIN_SM_nCS1,
+	MFP_PIN_DF_WEn,
+	MFP_PIN_DF_REn,
+	MFP_PIN_DF_CLE_SM_OEn,
+	MFP_PIN_DF_ALE_SM_WEn,
+	MFP_PIN_DF_RDY0,
+	MFP_PIN_DF_RDY1,
+
+	MFP_PIN_SM_SCLK,
+	MFP_PIN_SM_BE0,
+	MFP_PIN_SM_BE1,
+	MFP_PIN_SM_ADV,
+	MFP_PIN_SM_ADVMUX,
+	MFP_PIN_SM_RDY,
+
+	MFP_PIN_MMC1_DAT7,
+	MFP_PIN_MMC1_DAT6,
+	MFP_PIN_MMC1_DAT5,
+	MFP_PIN_MMC1_DAT4,
+	MFP_PIN_MMC1_DAT3,
+	MFP_PIN_MMC1_DAT2,
+	MFP_PIN_MMC1_DAT1,
+	MFP_PIN_MMC1_DAT0,
+	MFP_PIN_MMC1_CMD,
+	MFP_PIN_MMC1_CLK,
+	MFP_PIN_MMC1_CD,
+	MFP_PIN_MMC1_WP,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	/* additional pins on MMP2 */
+	MFP_PIN_TWSI1_SCL,
+	MFP_PIN_TWSI1_SDA,
+	MFP_PIN_TWSI4_SCL,
+	MFP_PIN_TWSI4_SDA,
+	MFP_PIN_CLK_REQ,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_FLOAT		(0x4 << 21)
+#define MFP_PULL_MASK		(0x7 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x7)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * beginning at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(void __iomem *mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}()	- for direct read/write access to the MFPR register
+ * mfp_config()		- for configuring a group of MFPR registers
+ * mfp_config_lpm()	- configuring all low power MFPR registers for suspend
+ * mfp_config_run()	- configuring all run time  MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */
diff --git a/kernel/arch/arm/plat-pxa/mfp.c b/kernel/arch/arm/plat-pxa/mfp.c
new file mode 100644
index 000000000..2c4dbb1f4
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/mfp.c
@@ -0,0 +1,285 @@
+/*
+ * linux/arch/arm/plat-pxa/mfp.c
+ *
+ *   Multi-Function Pin Support
+ *
+ * Copyright (C) 2007 Marvell Internation Ltd.
+ *
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <plat/mfp.h>
+
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
+
+/* mfp_spin_lock is used to ensure that MFP register configuration
+ * (most likely a read-modify-write operation) is atomic, and that
+ * mfp_table[] is consistent
+ */
+static DEFINE_SPINLOCK(mfp_spin_lock);
+
+static void __iomem *mfpr_mmio_base;
+
+struct mfp_pin {
+	unsigned long	config;		/* -1 for not configured */
+	unsigned long	mfpr_off;	/* MFPRxx Register offset */
+	unsigned long	mfpr_run;	/* Run-Mode Register Value */
+	unsigned long	mfpr_lpm;	/* Low Power Mode Register Value */
+};
+
+static struct mfp_pin mfp_table[MFP_PIN_MAX];
+
+/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
+static const unsigned long mfpr_lpm[] = {
+	MFPR_LPM_INPUT,
+	MFPR_LPM_DRIVE_LOW,
+	MFPR_LPM_DRIVE_HIGH,
+	MFPR_LPM_PULL_LOW,
+	MFPR_LPM_PULL_HIGH,
+	MFPR_LPM_FLOAT,
+	MFPR_LPM_INPUT,
+};
+
+/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
+static const unsigned long mfpr_pull[] = {
+	MFPR_PULL_NONE,
+	MFPR_PULL_LOW,
+	MFPR_PULL_HIGH,
+	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
+};
+
+/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
+static const unsigned long mfpr_edge[] = {
+	MFPR_EDGE_NONE,
+	MFPR_EDGE_RISE,
+	MFPR_EDGE_FALL,
+	MFPR_EDGE_BOTH,
+};
+
+#define mfpr_readl(off)			\
+	__raw_readl(mfpr_mmio_base + (off))
+
+#define mfpr_writel(off, val)		\
+	__raw_writel(val, mfpr_mmio_base + (off))
+
+#define mfp_configured(p)	((p)->config != -1)
+
+/*
+ * perform a read-back of any valid MFPR register to make sure the
+ * previous writings are finished
+ */
+static unsigned long mfpr_off_readback;
+#define mfpr_sync()	(void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
+
+static inline void __mfp_config_run(struct mfp_pin *p)
+{
+	if (mfp_configured(p))
+		mfpr_writel(p->mfpr_off, p->mfpr_run);
+}
+
+static inline void __mfp_config_lpm(struct mfp_pin *p)
+{
+	if (mfp_configured(p)) {
+		unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR;
+		if (mfpr_clr != p->mfpr_run)
+			mfpr_writel(p->mfpr_off, mfpr_clr);
+		if (p->mfpr_lpm != mfpr_clr)
+			mfpr_writel(p->mfpr_off, p->mfpr_lpm);
+	}
+}
+
+void mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	for (i = 0; i < num; i++, mfp_cfgs++) {
+		unsigned long tmp, c = *mfp_cfgs;
+		struct mfp_pin *p;
+		int pin, af, drv, lpm, edge, pull;
+
+		pin = MFP_PIN(c);
+		BUG_ON(pin >= MFP_PIN_MAX);
+		p = &mfp_table[pin];
+
+		af  = MFP_AF(c);
+		drv = MFP_DS(c);
+		lpm = MFP_LPM_STATE(c);
+		edge = MFP_LPM_EDGE(c);
+		pull = MFP_PULL(c);
+
+		/* run-mode pull settings will conflict with MFPR bits of
+		 * low power mode state,  calculate mfpr_run and mfpr_lpm
+		 * individually if pull != MFP_PULL_NONE
+		 */
+		tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv);
+
+		if (likely(pull == MFP_PULL_NONE)) {
+			p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_lpm = p->mfpr_run;
+		} else {
+			p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge];
+			p->mfpr_run = tmp | mfpr_pull[pull];
+		}
+
+		p->config = c; __mfp_config_run(p);
+	}
+
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+unsigned long mfp_read(int mfp)
+{
+	unsigned long val, flags;
+
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	val = mfpr_readl(mfp_table[mfp].mfpr_off);
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+
+	return val;
+}
+
+void mfp_write(int mfp, unsigned long val)
+{
+	unsigned long flags;
+
+	BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+	mfpr_writel(mfp_table[mfp].mfpr_off, val);
+	mfpr_sync();
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void __init mfp_init_base(void __iomem *mfpr_base)
+{
+	int i;
+
+	/* initialize the table with default - unconfigured */
+	for (i = 0; i < ARRAY_SIZE(mfp_table); i++)
+		mfp_table[i].config = -1;
+
+	mfpr_mmio_base = mfpr_base;
+}
+
+void __init mfp_init_addr(struct mfp_addr_map *map)
+{
+	struct mfp_addr_map *p;
+	unsigned long offset, flags;
+	int i;
+
+	spin_lock_irqsave(&mfp_spin_lock, flags);
+
+	/* mfp offset for readback */
+	mfpr_off_readback = map[0].offset;
+
+	for (p = map; p->start != MFP_PIN_INVALID; p++) {
+		offset = p->offset;
+		i = p->start;
+
+		do {
+			mfp_table[i].mfpr_off = offset;
+			mfp_table[i].mfpr_run = 0;
+			mfp_table[i].mfpr_lpm = 0;
+			offset += 4; i++;
+		} while ((i <= p->end) && (p->end != -1));
+	}
+
+	spin_unlock_irqrestore(&mfp_spin_lock, flags);
+}
+
+void mfp_config_lpm(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_lpm(p);
+}
+
+void mfp_config_run(void)
+{
+	struct mfp_pin *p = &mfp_table[0];
+	int pin;
+
+	for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++, p++)
+		__mfp_config_run(p);
+}
diff --git a/kernel/arch/arm/plat-pxa/ssp.c b/kernel/arch/arm/plat-pxa/ssp.c
new file mode 100644
index 000000000..ad9529cc4
--- /dev/null
+++ b/kernel/arch/arm/plat-pxa/ssp.c
@@ -0,0 +1,292 @@
+/*
+ *  linux/arch/arm/mach-pxa/ssp.c
+ *
+ *  based on linux/arch/arm/mach-sa1100/ssp.c by Russell King
+ *
+ *  Copyright (C) 2003 Russell King.
+ *  Copyright (C) 2003 Wolfson Microelectronics PLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  PXA2xx SSP driver.  This provides the generic core for simple
+ *  IO-based SSP applications and allows easy port setup for DMA access.
+ *
+ *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->port_id == port && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request);
+
+struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node,
+				      const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->of_node == of_node && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL(pxa_ssp_request_of);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+	mutex_lock(&ssp_lock);
+	if (ssp->use_count) {
+		ssp->use_count--;
+		ssp->label = NULL;
+	} else
+		dev_err(&ssp->pdev->dev, "device already free\n");
+	mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL(pxa_ssp_free);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pxa_ssp_of_ids[] = {
+	{ .compatible = "mrvl,pxa25x-ssp",	.data = (void *) PXA25x_SSP },
+	{ .compatible = "mvrl,pxa25x-nssp",	.data = (void *) PXA25x_NSSP },
+	{ .compatible = "mrvl,pxa27x-ssp",	.data = (void *) PXA27x_SSP },
+	{ .compatible = "mrvl,pxa3xx-ssp",	.data = (void *) PXA3xx_SSP },
+	{ .compatible = "mvrl,pxa168-ssp",	.data = (void *) PXA168_SSP },
+	{ .compatible = "mrvl,pxa910-ssp",	.data = (void *) PXA910_SSP },
+	{ .compatible = "mrvl,ce4100-ssp",	.data = (void *) CE4100_SSP },
+	{ .compatible = "mrvl,lpss-ssp",	.data = (void *) LPSS_SSP },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
+#endif
+
+static int pxa_ssp_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+	struct device *dev = &pdev->dev;
+
+	ssp = devm_kzalloc(dev, sizeof(struct ssp_device), GFP_KERNEL);
+	if (ssp == NULL)
+		return -ENOMEM;
+
+	ssp->pdev = pdev;
+
+	ssp->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ssp->clk))
+		return PTR_ERR(ssp->clk);
+
+	if (dev->of_node) {
+		struct of_phandle_args dma_spec;
+		struct device_node *np = dev->of_node;
+		int ret;
+
+		/*
+		 * FIXME: we should allocate the DMA channel from this
+		 * context and pass the channel down to the ssp users.
+		 * For now, we lookup the rx and tx indices manually
+		 */
+
+		/* rx */
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 0, &dma_spec);
+
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_rx = dma_spec.args[0];
+		of_node_put(dma_spec.np);
+
+		/* tx */
+		ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells",
+						 1, &dma_spec);
+		if (ret) {
+			dev_err(dev, "Can't parse dmas property\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_tx = dma_spec.args[0];
+		of_node_put(dma_spec.np);
+	} else {
+		res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+		if (res == NULL) {
+			dev_err(dev, "no SSP RX DRCMR defined\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_rx = res->start;
+
+		res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+		if (res == NULL) {
+			dev_err(dev, "no SSP TX DRCMR defined\n");
+			return -ENODEV;
+		}
+		ssp->drcmr_tx = res->start;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "no memory resource defined\n");
+		return -ENODEV;
+	}
+
+	res = devm_request_mem_region(dev, res->start, resource_size(res),
+				      pdev->name);
+	if (res == NULL) {
+		dev_err(dev, "failed to request memory resource\n");
+		return -EBUSY;
+	}
+
+	ssp->phys_base = res->start;
+
+	ssp->mmio_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (ssp->mmio_base == NULL) {
+		dev_err(dev, "failed to ioremap() registers\n");
+		return -ENODEV;
+	}
+
+	ssp->irq = platform_get_irq(pdev, 0);
+	if (ssp->irq < 0) {
+		dev_err(dev, "no IRQ resource defined\n");
+		return -ENODEV;
+	}
+
+	if (dev->of_node) {
+		const struct of_device_id *id =
+			of_match_device(of_match_ptr(pxa_ssp_of_ids), dev);
+		ssp->type = (int) id->data;
+	} else {
+		const struct platform_device_id *id =
+			platform_get_device_id(pdev);
+		ssp->type = (int) id->driver_data;
+
+		/* PXA2xx/3xx SSP ports starts from 1 and the internal pdev->id
+		 * starts from 0, do a translation here
+		 */
+		ssp->port_id = pdev->id + 1;
+	}
+
+	ssp->use_count = 0;
+	ssp->of_node = dev->of_node;
+
+	mutex_lock(&ssp_lock);
+	list_add(&ssp->node, &ssp_list);
+	mutex_unlock(&ssp_lock);
+
+	platform_set_drvdata(pdev, ssp);
+
+	return 0;
+}
+
+static int pxa_ssp_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct ssp_device *ssp;
+
+	ssp = platform_get_drvdata(pdev);
+	if (ssp == NULL)
+		return -ENODEV;
+
+	iounmap(ssp->mmio_base);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	clk_put(ssp->clk);
+
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+
+	kfree(ssp);
+	return 0;
+}
+
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ "pxa3xx-ssp",		PXA3xx_SSP },
+	{ "pxa168-ssp",		PXA168_SSP },
+	{ "pxa910-ssp",		PXA910_SSP },
+	{ },
+};
+
+static struct platform_driver pxa_ssp_driver = {
+	.probe		= pxa_ssp_probe,
+	.remove		= pxa_ssp_remove,
+	.driver		= {
+		.name		= "pxa2xx-ssp",
+		.of_match_table	= of_match_ptr(pxa_ssp_of_ids),
+	},
+	.id_table	= ssp_id_table,
+};
+
+static int __init pxa_ssp_init(void)
+{
+	return platform_driver_register(&pxa_ssp_driver);
+}
+
+static void __exit pxa_ssp_exit(void)
+{
+	platform_driver_unregister(&pxa_ssp_driver);
+}
+
+arch_initcall(pxa_ssp_init);
+module_exit(pxa_ssp_exit);
+
+MODULE_DESCRIPTION("PXA SSP driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");