Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

6 files changed, 880 insertions, 0 deletions

diff --git a/kernel/arch/arm/mach-u300/Kconfig b/kernel/arch/arm/mach-u300/Kconfig
new file mode 100644
index 000000000..bc51a7139
--- /dev/null
+++ b/kernel/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,44 @@
+menuconfig ARCH_U300
+	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
+	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_MMIO
+	select CPU_ARM926T
+	select HAVE_TCM
+	select PINCTRL
+	select PINCTRL_COH901
+	select PINCTRL_U300
+	select MFD_SYSCON
+	help
+	  Support for ST-Ericsson U300 series mobile platforms.
+
+if ARCH_U300
+
+config MACH_U300
+	depends on ARCH_U300
+	bool "U300"
+	default y
+
+config U300_DEBUG
+	depends on ARCH_U300
+	bool "Debug support for U300"
+	depends on PM
+	help
+		Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SPIDUMMY
+	depends on ARCH_U300
+	bool "SSP/SPI dummy chip"
+	select SPI
+	select SPI_MASTER
+	select SPI_PL022
+	help
+		This creates a small kernel module that creates a dummy
+		SPI device to be used for loopback tests. Regularly used
+		to test reference designs. If you're not testing SPI,
+		you don't need it. Selecting this will activate the
+		SPI framework and ARM PL022 support.
+
+endif
diff --git a/kernel/arch/arm/mach-u300/Makefile b/kernel/arch/arm/mach-u300/Makefile
new file mode 100644
index 000000000..87d37de05
--- /dev/null
+++ b/kernel/arch/arm/mach-u300/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y		:= core.o
+
+obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
+obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/kernel/arch/arm/mach-u300/Makefile.boot b/kernel/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 000000000..87811de0b
--- /dev/null
+++ b/kernel/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	+= 0x48008000
+params_phys-y	:= 0x48000100
+# This isn't used.
+#initrd_phys-y	:= 0x48800000
diff --git a/kernel/arch/arm/mach-u300/core.c b/kernel/arch/arm/mach-u300/core.c
new file mode 100644
index 000000000..35670b15f
--- /dev/null
+++ b/kernel/arch/arm/mach-u300/core.c
@@ -0,0 +1,415 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2012 ST-Ericsson SA
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_data/clk-u300.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE		0x80000000
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE		0x9f800000
+/* ALE, CLE offset for FSMC NAND */
+#define PLAT_NAND_CLE			(1 << 16)
+#define PLAT_NAND_ALE			(1 << 17)
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE		0xa0000000
+#define U300_AHB_PER_VIRT_BASE		0xff010000
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE		0xc0000000
+#define U300_FAST_PER_VIRT_BASE		0xff020000
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE		0xc0010000
+#define U300_SLOW_PER_VIRT_BASE		0xff000000
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE		0xffff0000
+#define U300_BOOTROM_VIRT_BASE		0xffff0000
+/* SEMI config base */
+#define U300_SEMI_CONFIG_BASE		0x2FFE0000
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE		(U300_AHB_PER_PHYS_BASE+0x0000)
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE		(U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE		(U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE		IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE			(U300_AHB_PER_PHYS_BASE+0x3000)
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE		(U300_AHB_PER_PHYS_BASE+0x4000)
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE		(U300_FAST_PER_PHYS_BASE+0x0000)
+/* MMC/SD controller */
+#define U300_MMCSD_BASE			(U300_FAST_PER_PHYS_BASE+0x1000)
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE		(U300_FAST_PER_PHYS_BASE+0x2000)
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE		(U300_FAST_PER_PHYS_BASE+0x3000)
+/* I2C0 controller */
+#define U300_I2C0_BASE			(U300_FAST_PER_PHYS_BASE+0x4000)
+/* I2C1 controller */
+#define U300_I2C1_BASE			(U300_FAST_PER_PHYS_BASE+0x5000)
+/* SPI controller */
+#define U300_SPI_BASE			(U300_FAST_PER_PHYS_BASE+0x6000)
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE			(U300_FAST_PER_PHYS_BASE+0x7000)
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE		(U300_SLOW_PER_PHYS_BASE)
+/* SYSCON */
+#define U300_SYSCON_BASE		(U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
+/* Watchdog */
+#define U300_WDOG_BASE			(U300_SLOW_PER_PHYS_BASE+0x2000)
+/* UART0 */
+#define U300_UART0_BASE			(U300_SLOW_PER_PHYS_BASE+0x3000)
+/* APP side special timer */
+#define U300_TIMER_APP_BASE		(U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE		IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
+/* Keypad */
+#define U300_KEYPAD_BASE		(U300_SLOW_PER_PHYS_BASE+0x5000)
+/* GPIO */
+#define U300_GPIO_BASE			(U300_SLOW_PER_PHYS_BASE+0x6000)
+/* RTC */
+#define U300_RTC_BASE			(U300_SLOW_PER_PHYS_BASE+0x7000)
+/* Bus tracer */
+#define U300_BUSTR_BASE			(U300_SLOW_PER_PHYS_BASE+0x8000)
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE		(U300_SLOW_PER_PHYS_BASE+0x9000)
+/* Genric Timer */
+#define U300_TIMER_BASE			(U300_SLOW_PER_PHYS_BASE+0xa000)
+/* PPM */
+#define U300_PPM_BASE			(U300_SLOW_PER_PHYS_BASE+0xb000)
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) */
+#define U300_ISP_BASE			(0xA0008000)
+/* DMA Controller base */
+#define U300_DMAC_BASE			(0xC0020000)
+/* MSL Base */
+#define U300_MSL_BASE			(0xc0022000)
+/* APEX Base */
+#define U300_APEX_BASE			(0xc0030000)
+/* Video Encoder Base */
+#define U300_VIDEOENC_BASE		(0xc0080000)
+/* XGAM Base */
+#define U300_XGAM_BASE			(0xd0000000)
+
+/*
+ * SYSCON addresses applicable to the core machine.
+ */
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR					(0x400)
+/* SMCR */
+#define U300_SYSCON_SMCR					(0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR					(0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR						(0x4f8)
+#define U300_SYSCON_PCR_SERV_IND				(0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR						(0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
+
+static void __iomem *syscon_base;
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+	{
+		.virtual	= U300_SLOW_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_AHB_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= U300_FAST_PER_VIRT_BASE,
+		.pfn		= __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+		.length		= SZ_32K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init u300_map_io(void)
+{
+	iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+static unsigned long pin_pullup_conf[] = {
+	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
+};
+
+static unsigned long pin_highz_conf[] = {
+	PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
+};
+
+/* Pin control settings */
+static struct pinctrl_map __initdata u300_pinmux_map[] = {
+	/* anonymous maps for chip power and EMIFs */
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
+	PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
+	/* per-device maps for MMC/SD, SPI and UART */
+	PIN_MAP_MUX_GROUP_DEFAULT("mmci",  "pinctrl-u300", NULL, "mmc0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
+	/* This pin is used for clock return rather than GPIO */
+	PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
+				    pin_pullup_conf),
+	/* This pin is used for card detect */
+	PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
+				    pin_highz_conf),
+};
+
+struct db_chip {
+	u16 chipid;
+	const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+	{
+		.chipid = 0xb800,
+		.name = "DB3000",
+	},
+	{
+		.chipid = 0xc000,
+		.name = "DB3100",
+	},
+	{
+		.chipid = 0xc800,
+		.name = "DB3150",
+	},
+	{
+		.chipid = 0xd800,
+		.name = "DB3200",
+	},
+	{
+		.chipid = 0xe000,
+		.name = "DB3250",
+	},
+	{
+		.chipid = 0xe800,
+		.name = "DB3210",
+	},
+	{
+		.chipid = 0xf000,
+		.name = "DB3350 P1x",
+	},
+	{
+		.chipid = 0xf100,
+		.name = "DB3350 P2x",
+	},
+	{
+		.chipid = 0x0000, /* List terminator */
+		.name = NULL,
+	}
+};
+
+static void __init u300_init_check_chip(void)
+{
+
+	u16 val;
+	struct db_chip *chip;
+	const char *chipname;
+	const char unknown[] = "UNKNOWN";
+
+	/* Read out and print chip ID */
+	val = readw(syscon_base + U300_SYSCON_CIDR);
+	/* This is in funky bigendian order... */
+	val = (val & 0xFFU) << 8 | (val >> 8);
+	chip = db_chips;
+	chipname = unknown;
+
+	for ( ; chip->chipid; chip++) {
+		if (chip->chipid == (val & 0xFF00U)) {
+			chipname = chip->name;
+			break;
+		}
+	}
+	printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+	       "(chip ID 0x%04x)\n", chipname, val);
+
+	if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+		printk(KERN_ERR "Platform configured for BS335 " \
+		       " with DB3350 but %s detected, expect problems!",
+		       chipname);
+	}
+}
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static void u300_restart(enum reboot_mode mode, const char *cmd)
+{
+	switch (mode) {
+	case REBOOT_SOFT:
+	case REBOOT_HARD:
+#ifdef CONFIG_COH901327_WATCHDOG
+		coh901327_watchdog_reset();
+#endif
+		break;
+	default:
+		/* Do nothing */
+		break;
+	}
+	/* Wait for system do die/reset. */
+	while (1);
+}
+
+/* These are mostly to get the right device names for the clock lookups */
+static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE,
+		"pinctrl-u300", NULL),
+	OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE,
+		"u300-gpio", NULL),
+	OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE,
+		"coh901327_wdog", NULL),
+	OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE,
+		"rtc-coh901331", NULL),
+	OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE,
+		"coh901318", NULL),
+	OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE,
+		"fsmc-nand", NULL),
+	OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE,
+		"uart0", NULL),
+	OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE,
+		"uart1", NULL),
+	OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE,
+		"pl022", NULL),
+	OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE,
+		"stu300.0", NULL),
+	OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE,
+		"stu300.1", NULL),
+	OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE,
+		"mmci", NULL),
+	{ /* sentinel */ },
+};
+
+static void __init u300_init_irq_dt(void)
+{
+	struct device_node *syscon;
+	struct clk *clk;
+
+	syscon = of_find_node_by_path("/syscon@c0011000");
+	if (!syscon) {
+		pr_crit("could not find syscon node\n");
+		return;
+	}
+	syscon_base = of_iomap(syscon, 0);
+	if (!syscon_base) {
+		pr_crit("could not remap syscon\n");
+		return;
+	}
+	/* initialize clocking early, we want to clock the INTCON */
+	u300_clk_init(syscon_base);
+
+	/* Bootstrap EMIF and SEMI clocks */
+	clk = clk_get_sys("pl172", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+	clk = clk_get_sys("semi", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+
+	/* Clock the interrupt controller */
+	clk = clk_get_sys("intcon", NULL);
+	BUG_ON(IS_ERR(clk));
+	clk_prepare_enable(clk);
+
+	irqchip_init();
+}
+
+static void __init u300_init_machine_dt(void)
+{
+	u16 val;
+
+	/* Check what platform we run and print some status information */
+	u300_init_check_chip();
+
+	/* Initialize pinmuxing */
+	pinctrl_register_mappings(u300_pinmux_map,
+				  ARRAY_SIZE(u300_pinmux_map));
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			u300_auxdata_lookup, NULL);
+
+	/* Enable SEMI self refresh */
+	val = readw(syscon_base + U300_SYSCON_SMCR) |
+		U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+	writew(val, syscon_base + U300_SYSCON_SMCR);
+}
+
+static const char * u300_board_compat[] = {
+	"stericsson,u300",
+	NULL,
+};
+
+DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
+	.map_io		= u300_map_io,
+	.init_irq	= u300_init_irq_dt,
+	.init_time	= clocksource_of_init,
+	.init_machine	= u300_init_machine_dt,
+	.restart	= u300_restart,
+	.dt_compat      = u300_board_compat,
+MACHINE_END
diff --git a/kernel/arch/arm/mach-u300/dummyspichip.c b/kernel/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 000000000..131996805
--- /dev/null
+++ b/kernel/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,277 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+	struct device *dev;
+	struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * WARNING! Do not dereference the chip-specific data in any normal
+	 * driver for a chip. It is usually STATIC and shall not be read
+	 * or written to. Your chip driver should NOT depend on fields in this
+	 * struct, this is just used here to alter the behaviour of the chip
+	 * in order to perform tests.
+	 */
+	int status;
+	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+			0xF0, 0x0D};
+	u8 rxbuf[14];
+	u8 *bigtxbuf_virtual;
+	u8 *bigrxbuf_virtual;
+
+	if (mutex_lock_interruptible(&p_dummy->lock))
+		return -ERESTARTSYS;
+
+	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+	if (bigtxbuf_virtual == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+	/* Fill TXBUF with some happy pattern */
+	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+	/*
+	 * Force chip to 8 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	spi->bits_per_word = 8;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	/* Now run the tests for 8bit mode */
+	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+		"in 8bit mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status < 0)
+		pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
+			status);
+	else
+		pr_info("Simple test 1: SUCCESS!\n");
+
+	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+		"in 8bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
+			status);
+	else
+		pr_info("Simple test 2: SUCCESS!\n");
+
+	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+		"in 8bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 3: SUCCESS!\n");
+
+	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+		"bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 8);
+	if (status < 0)
+		pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
+			status);
+	else
+		pr_info("Simple test 4 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
+			status);
+	else
+		pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+		"14 bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 14);
+	if (status < 0)
+		pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 5 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 5: SUCCESS!\n");
+
+	pr_info("Simple test 6: write %d bytes with spi_write(), "
+		"read %d bytes garbage with spi_read() in 8bit mode\n",
+		DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 6 step 1: SUCCESS!\n");
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 6: SUCCESS!\n");
+
+
+	/*
+	 * Force chip to 16 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	spi->bits_per_word = 16;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+		"in 16bit bus mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status == -EIO)
+		pr_info("Simple test 7: SUCCESS! (expected failure with "
+			"status EIO)\n");
+	else if (status < 0)
+		pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
+			status);
+	else
+		pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
+
+	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+		"in 16bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
+			status);
+	else
+		pr_info("Simple test 8: SUCCESS!\n");
+
+	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+		"in 16bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 9: SUCCESS!\n");
+
+	pr_info("Simple test 10: write %d bytes with spi_write(), "
+	       "read %d bytes garbage with spi_read() in 16bit mode\n",
+	       DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+			status);
+	else
+		pr_info("Simple test 10: SUCCESS!\n");
+
+	status = sprintf(buf, "loop test complete\n");
+	kfree(bigrxbuf_virtual);
+	kfree(bigtxbuf_virtual);
+ out:
+	mutex_unlock(&p_dummy->lock);
+	return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int pl022_dummy_probe(struct spi_device *spi)
+{
+	struct dummy *p_dummy;
+	int status;
+
+	dev_info(&spi->dev, "probing dummy SPI device\n");
+
+	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+	if (!p_dummy)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, p_dummy);
+	mutex_init(&p_dummy->lock);
+
+	/* sysfs hook */
+	status = device_create_file(&spi->dev, &dev_attr_looptest);
+	if (status) {
+		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+		goto out_dev_create_looptest_failed;
+	}
+
+	return 0;
+
+out_dev_create_looptest_failed:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+	return status;
+}
+
+static int pl022_dummy_remove(struct spi_device *spi)
+{
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	dev_info(&spi->dev, "removing dummy SPI device\n");
+	device_remove_file(&spi->dev, &dev_attr_looptest);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+
+	return 0;
+}
+
+static const struct of_device_id pl022_dummy_dt_match[] = {
+	{ .compatible = "arm,pl022-dummy" },
+	{},
+};
+
+static struct spi_driver pl022_dummy_driver = {
+	.driver = {
+		.name	= "spi-dummy",
+		.owner	= THIS_MODULE,
+		.of_match_table = pl022_dummy_dt_match,
+	},
+	.probe	= pl022_dummy_probe,
+	.remove	= pl022_dummy_remove,
+};
+
+module_spi_driver(pl022_dummy_driver);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/arch/arm/mach-u300/regulator.c b/kernel/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000..595b574c2
--- /dev/null
+++ b/kernel/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,132 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+	sigset_t old, all;
+
+	sigfillset(&all);
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		/* Disable LDO D to shut down the system */
+		if (main_power_15)
+			regulator_disable(main_power_15);
+		else
+			pr_err("regulator not available to shut down system\n");
+		(void) sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+	return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init __u300_init_boardpower(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *syscon_np;
+	struct regmap *regmap;
+	int err;
+
+	pr_info("U300: setting up board power\n");
+
+	syscon_np = of_parse_phandle(np, "syscon", 0);
+	if (!syscon_np) {
+		pr_crit("U300: no syscon node\n");
+		return -ENODEV;
+	}
+	regmap = syscon_node_to_regmap(syscon_np);
+	if (IS_ERR(regmap)) {
+		pr_crit("U300: could not locate syscon regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	main_power_15 = regulator_get(&pdev->dev, "vana15");
+
+	if (IS_ERR(main_power_15)) {
+		pr_err("could not get vana15");
+		return PTR_ERR(main_power_15);
+	}
+	err = regulator_enable(main_power_15);
+	if (err) {
+		pr_err("could not enable vana15\n");
+		return err;
+	}
+
+	/*
+	 * On U300 a special system controller register pulls up the DC
+	 * until the vana15 (LDO D) regulator comes up. At this point, all
+	 * regulators are set and we do not need power control via
+	 * DC ON anymore. This function will likely be moved whenever
+	 * the rest of the U300 power management is implemented.
+	 */
+	pr_info("U300: disable system controller pull-up\n");
+	regmap_update_bits(regmap, U300_SYSCON_PMCR,
+			   U300_SYSCON_PMCR_DCON_ENABLE, 0);
+
+	/* Register globally exported PM poweroff hook */
+	pm_power_off = u300_pm_poweroff;
+
+	return 0;
+}
+
+static int __init s365_board_probe(struct platform_device *pdev)
+{
+	return __u300_init_boardpower(pdev);
+}
+
+static const struct of_device_id s365_board_match[] = {
+	{ .compatible = "stericsson,s365" },
+	{},
+};
+
+static struct platform_driver s365_board_driver = {
+	.driver		= {
+		.name   = "s365-board",
+		.of_match_table = s365_board_match,
+	},
+};
+
+/*
+ * So at module init time we hog the regulator!
+ */
+static int __init u300_init_boardpower(void)
+{
+	return platform_driver_probe(&s365_board_driver,
+				     s365_board_probe);
+}
+
+device_initcall(u300_init_boardpower);