diff options
author | 2015-08-04 12:17:53 -0700 | |
---|---|---|
committer | 2015-08-04 15:44:42 -0700 | |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/arch/arm/mach-spear/spear3xx.c | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/arch/arm/mach-spear/spear3xx.c')
-rw-r--r-- | kernel/arch/arm/mach-spear/spear3xx.c | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/kernel/arch/arm/mach-spear/spear3xx.c b/kernel/arch/arm/mach-spear/spear3xx.c new file mode 100644 index 000000000..bf3b1fd8c --- /dev/null +++ b/kernel/arch/arm/mach-spear/spear3xx.c @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-spear3xx/spear3xx.c + * + * SPEAr3XX machines common source file + * + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.linux@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "SPEAr3xx: " fmt + +#include <linux/amba/pl022.h> +#include <linux/amba/pl080.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <asm/mach/map.h> +#include "pl080.h" +#include "generic.h" +#include <mach/spear.h> +#include <mach/misc_regs.h> + +/* ssp device registration */ +struct pl022_ssp_controller pl022_plat_data = { + .bus_id = 0, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp0_tx", + .dma_rx_param = "ssp0_rx", + /* + * This is number of spi devices that can be connected to spi. There are + * two type of chipselects on which slave devices can work. One is chip + * select provided by spi masters other is controlled through external + * gpio's. We can't use chipselect provided from spi master (because as + * soon as FIFO becomes empty, CS is disabled and transfer ends). So + * this number now depends on number of gpios available for spi. each + * slave on each master requires a separate gpio pin. + */ + .num_chipselect = 2, +}; + +/* dmac device registration */ +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_xfer_signal = pl080_get_signal, + .put_xfer_signal = pl080_put_signal, +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); +} + +void __init spear3xx_timer_init(void) +{ + char pclk_name[] = "pll3_clk"; + struct clk *gpt_clk, *pclk; + + spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE); + + /* get the system timer clock */ + gpt_clk = clk_get_sys("gpt0", NULL); + if (IS_ERR(gpt_clk)) { + pr_err("%s:couldn't get clk for gpt\n", __func__); + BUG(); + } + + /* get the suitable parent clock for timer*/ + pclk = clk_get(NULL, pclk_name); + if (IS_ERR(pclk)) { + pr_err("%s:couldn't get %s as parent for gpt\n", + __func__, pclk_name); + BUG(); + } + + clk_set_parent(gpt_clk, pclk); + clk_put(gpt_clk); + clk_put(pclk); + + spear_setup_of_timer(); +} |