Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

1 files changed, 26 insertions, 36 deletions

diff --git a/kernel/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/kernel/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 62437b578..73e3adbc1 100644
--- a/kernel/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/kernel/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -41,39 +41,26 @@
 
 #define REGULATOR_IRQ_MASK	BIT(2)	/* IRQ2, active low */
 
-static void __iomem *irqc;
-
-static const u8 da9063_mask_regs[] = {
-	DA9063_REG_IRQ_MASK_A,
-	DA9063_REG_IRQ_MASK_B,
-	DA9063_REG_IRQ_MASK_C,
-	DA9063_REG_IRQ_MASK_D,
-};
-
-/* DA9210 System Control and Event Registers */
+/* start of DA9210 System Control and Event Registers */
 #define DA9210_REG_MASK_A		0x54
-#define DA9210_REG_MASK_B		0x55
-
-static const u8 da9210_mask_regs[] = {
-	DA9210_REG_MASK_A,
-	DA9210_REG_MASK_B,
-};
-
-static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
-			     unsigned int nregs)
-{
-	unsigned int i;
 
-	dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
+static void __iomem *irqc;
 
-	for (i = 0; i < nregs; i++) {
-		int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
-		if (error) {
-			dev_err(&client->dev, "i2c error %d\n", error);
-			return;
-		}
-	}
-}
+/* first byte sets the memory pointer, following are consecutive reg values */
+static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
+static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
+
+static struct i2c_msg da9xxx_msgs[2] = {
+	{
+		.addr = 0x58,
+		.len = ARRAY_SIZE(da9063_irq_clr),
+		.buf = da9063_irq_clr,
+	}, {
+		.addr = 0x68,
+		.len = ARRAY_SIZE(da9210_irq_clr),
+		.buf = da9210_irq_clr,
+	},
+};
 
 static int regulator_quirk_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
 	client = to_i2c_client(dev);
 	dev_dbg(dev, "Detected %s\n", client->name);
 
-	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
-		da9xxx_mask_irqs(client, da9063_mask_regs,
-				 ARRAY_SIZE(da9063_mask_regs));
-	else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
-		da9xxx_mask_irqs(client, da9210_mask_regs,
-				 ARRAY_SIZE(da9210_mask_regs));
+	if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
+	    (client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
+		int ret;
+
+		dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
+		ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
+		if (ret != ARRAY_SIZE(da9xxx_msgs))
+			dev_err(&client->dev, "i2c error %d\n", ret);
+	}
 
 	mon = ioread32(irqc + IRQC_MONITOR);
 	if (mon & REGULATOR_IRQ_MASK)