diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arm/mach-omap2/board-overo.c | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arm/mach-omap2/board-overo.c')
-rw-r--r-- | kernel/arch/arm/mach-omap2/board-overo.c | 571 |
1 files changed, 0 insertions, 571 deletions
diff --git a/kernel/arch/arm/mach-omap2/board-overo.c b/kernel/arch/arm/mach-omap2/board-overo.c deleted file mode 100644 index 2dae6ccd3..000000000 --- a/kernel/arch/arm/mach-omap2/board-overo.c +++ /dev/null @@ -1,571 +0,0 @@ -/* - * board-overo.c (Gumstix Overo) - * - * Initial code: Steve Sakoman <steve@sakoman.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/map.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "common.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "gpmc.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -#define OVERO_GPIO_BT_XGATE 15 -#define OVERO_GPIO_W2W_NRESET 16 -#define OVERO_GPIO_PENDOWN 114 -#define OVERO_GPIO_BT_NRESET 164 -#define OVERO_GPIO_USBH_CPEN 168 -#define OVERO_GPIO_USBH_NRESET 183 - -#define OVERO_SMSC911X_CS 5 -#define OVERO_SMSC911X_GPIO 176 -#define OVERO_SMSC911X_NRESET 64 -#define OVERO_SMSC911X2_CS 4 -#define OVERO_SMSC911X2_GPIO 65 - -/* whether to register LCD35 instead of LCD43 */ -static bool overo_use_lcd35; - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - -/* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -static struct regulator_init_data vads7846_regulator = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), - .consumer_supplies = ads7846_supply, -}; - -static struct fixed_voltage_config vads7846 = { - .supply_name = "vads7846", - .microvolts = 3300000, /* 3.3V */ - .gpio = -EINVAL, - .startup_delay = 0, - .init_data = &vads7846_regulator, -}; - -static struct platform_device vads7846_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &vads7846, - }, -}; - -static void __init overo_ads7846_init(void) -{ - omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); - platform_device_register(&vads7846_device); -} - -#else -static inline void __init overo_ads7846_init(void) { return; } -#endif - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .id = 0, - .cs = OVERO_SMSC911X_CS, - .gpio_irq = OVERO_SMSC911X_GPIO, - .gpio_reset = OVERO_SMSC911X_NRESET, - .flags = SMSC911X_USE_32BIT, -}; - -static struct omap_smsc911x_platform_data smsc911x2_cfg = { - .id = 1, - .cs = OVERO_SMSC911X2_CS, - .gpio_irq = OVERO_SMSC911X2_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT, -}; - -static void __init overo_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); - gpmc_smsc911x_init(&smsc911x2_cfg); -} - -#else -static inline void __init overo_init_smsc911x(void) { return; } -#endif - -/* DSS */ -#define OVERO_GPIO_LCD_EN 144 -#define OVERO_GPIO_LCD_BL 145 - -static struct connector_atv_platform_data overo_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device overo_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &overo_tv_pdata, -}; - -static const struct display_timing overo_lcd43_videomode = { - .pixelclock = { 0, 9200000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 8, 0 }, - .hback_porch = { 0, 4, 0 }, - .hsync_len = { 0, 41, 0 }, - - .vactive = { 0, 272, 0 }, - .vfront_porch = { 0, 4, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 10, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data overo_lcd43_pdata = { - .name = "lcd43", - .source = "dpi.0", - - .data_lines = 24, - - .display_timing = &overo_lcd43_videomode, - - .enable_gpio = OVERO_GPIO_LCD_EN, - .backlight_gpio = OVERO_GPIO_LCD_BL, -}; - -static struct platform_device overo_lcd43_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &overo_lcd43_pdata, -}; - -static struct connector_dvi_platform_data overo_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device overo_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &overo_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data overo_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device overo_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &overo_tfp410_pdata, -}; - -static struct omap_dss_board_info overo_dss_data = { - .default_display_name = "lcd43", -}; - -static void __init overo_display_init(void) -{ - omap_display_init(&overo_dss_data); - - if (!overo_use_lcd35) - platform_device_register(&overo_lcd43_device); - platform_device_register(&overo_tfp410_device); - platform_device_register(&overo_dvi_connector_device); - platform_device_register(&overo_tv_connector_device); -} - -static struct mtd_partition overo_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 14 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .transceiver = true, - .ocr_mask = 0x00100000, /* 3.3V */ - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply overo_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led gpio_leds[] = { - { - .name = "overo:red:gpio21", - .default_trigger = "heartbeat", - .gpio = 21, - .active_low = true, - }, - { - .name = "overo:blue:gpio22", - .default_trigger = "none", - .gpio = 22, - .active_low = true, - }, - { - .name = "overo:blue:COM", - .default_trigger = "mmc0", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_leds_pdata = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device gpio_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_leds_pdata, - }, -}; - -static void __init overo_init_led(void) -{ - platform_device_register(&gpio_leds_device); -} - -#else -static inline void __init overo_init_led(void) { return; } -#endif - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -#include <linux/input.h> -#include <linux/gpio_keys.h> - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_0, - .gpio = 23, - .desc = "button0", - .wakeup = 1, - }, - { - .code = BTN_1, - .gpio = 14, - .desc = "button1", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_keys_pdata = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_keys_pdata, - }, -}; - -static void __init overo_init_keys(void) -{ - platform_device_register(&gpio_keys_device); -} - -#else -static inline void __init overo_init_keys(void) { return; } -#endif - -static int overo_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -} - -static struct twl4030_gpio_platform_data overo_gpio_data = { - .use_leds = true, - .setup = overo_twl_gpio_setup, -}; - -static struct regulator_init_data overo_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), - .consumer_supplies = overo_vmmc1_supply, -}; - -static struct twl4030_platform_data overo_twldata = { - .gpio = &overo_gpio_data, - .vmmc1 = &overo_vmmc1, -}; - -static int __init overo_i2c_init(void) -{ - omap3_pmic_get_config(&overo_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - overo_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("tps65950", &overo_twldata); - /* i2c2 pins are used for gpio */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct panel_lb035q02_platform_data overo_lcd35_pdata = { - .name = "lcd35", - .source = "dpi.0", - - .data_lines = 24, - - .enable_gpio = OVERO_GPIO_LCD_EN, - .backlight_gpio = OVERO_GPIO_LCD_BL, -}; - -/* - * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The - * selection is done based on the overo_use_lcd35 field. If new SPI - * devices are added here, extra work is needed to make only the lgphilips panel - * affected by the overo_use_lcd35 field. - */ -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "panel_lgphilips_lb035q02", - .bus_num = 1, - .chip_select = 1, - .max_speed_hz = 500000, - .mode = SPI_MODE_3, - .platform_data = &overo_lcd35_pdata, - }, -}; - -static int __init overo_spi_init(void) -{ - overo_ads7846_init(); - - if (overo_use_lcd35) { - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); - } - return 0; -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = OVERO_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct gpio overo_bt_gpios[] __initdata = { - { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, - { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), - REGULATOR_SUPPLY("vddvario", "smsc911x.1"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), -}; - -static void __init overo_init(void) -{ - int ret; - - if (strstr(boot_command_line, "omapdss.def_disp=lcd35")) - overo_use_lcd35 = true; - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - overo_i2c_init(); - omap_hsmmc_init(mmc); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - board_nand_init(overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - overo_spi_init(); - overo_init_smsc911x(); - overo_init_led(); - overo_init_keys(); - omap_twl4030_audio_init("overo", NULL); - - overo_display_init(); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, - "OVERO_GPIO_W2W_NRESET"); - if (ret == 0) { - gpio_export(OVERO_GPIO_W2W_NRESET, 0); - gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); - udelay(10); - gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); - } else { - pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n"); - } - - ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); - if (ret) { - pr_err("%s: could not obtain BT gpios\n", __func__); - } else { - gpio_export(OVERO_GPIO_BT_XGATE, 0); - gpio_export(OVERO_GPIO_BT_NRESET, 0); - gpio_set_value(OVERO_GPIO_BT_NRESET, 0); - mdelay(6); - gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } - - ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, - "OVERO_GPIO_USBH_CPEN"); - if (ret == 0) - gpio_export(OVERO_GPIO_USBH_CPEN, 0); - else - pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n"); -} - -MACHINE_START(OVERO, "Gumstix Overo") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = overo_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END |