Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 617 insertions, 0 deletions

diff --git a/kernel/arch/arm/mach-omap1/board-osk.c b/kernel/arch/arm/mach-omap1/board-osk.c
new file mode 100644
index 000000000..7436d4cf6
--- /dev/null
+++ b/kernel/arch/arm/mach-omap1/board-osk.c
@@ -0,0 +1,617 @@
+/*
+ * linux/arch/arm/mach-omap1/board-osk.c
+ *
+ * Board specific init for OMAP5912 OSK
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/smc91x.h>
+#include <linux/omapfb.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c/tps65010.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/omap1_bl.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/flash.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#include "common.h"
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
+static struct mtd_partition osk_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	}, {
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	}, {
+	      .name		= "filesystem",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data osk_flash_data = {
+	.width		= 2,
+	.set_vpp	= omap1_set_vpp,
+	.parts		= osk_partitions,
+	.nr_parts	= ARRAY_SIZE(osk_partitions),
+};
+
+static struct resource osk_flash_resource = {
+	/* this is on CS3, wherever it's mapped */
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device osk5912_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &osk_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &osk_flash_resource,
+};
+
+static struct smc91x_platdata osk5912_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct resource osk5912_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_OSK_ETHR_START,		/* Physical */
+		.end	= OMAP_OSK_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device osk5912_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &osk5912_smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
+	.resource	= osk5912_smc91x_resources,
+};
+
+static struct resource osk5912_cf_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_cf_device = {
+	.name		= "omap_cf",
+	.id		= -1,
+	.dev = {
+		.platform_data	= (void *) 2 /* CS2 */,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_cf_resources),
+	.resource	= osk5912_cf_resources,
+};
+
+static struct platform_device *osk5912_devices[] __initdata = {
+	&osk5912_flash_device,
+	&osk5912_smc91x_device,
+	&osk5912_cf_device,
+};
+
+static struct gpio_led tps_leds[] = {
+	/* NOTE:  D9 and D2 have hardware blink support.
+	 * Also, D9 requires non-battery power.
+	 */
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
+			.default_trigger = "ide-disk", },
+	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
+	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
+			.default_trigger = "heartbeat", },
+};
+
+static struct gpio_led_platform_data tps_leds_data = {
+	.num_leds	= 3,
+	.leds		= tps_leds,
+};
+
+static struct platform_device osk5912_tps_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &tps_leds_data,
+};
+
+static int osk_tps_setup(struct i2c_client *client, void *context)
+{
+	if (!IS_BUILTIN(CONFIG_TPS65010))
+		return -ENOSYS;
+
+	/* Set GPIO 1 HIGH to disable VBUS power supply;
+	 * OHCI driver powers it up/down as needed.
+	 */
+	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
+	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+
+	/* Set GPIO 2 high so LED D3 is off by default */
+	tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+	/* Set GPIO 3 low to take ethernet out of reset */
+	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
+	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+
+	/* GPIO4 is VDD_DSP */
+	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
+	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	/* REVISIT if DSP support isn't configured, power it off ... */
+
+	/* Let LED1 (D9) blink; leds-gpio may override it */
+	tps65010_set_led(LED1, BLINK);
+
+	/* Set LED2 off by default */
+	tps65010_set_led(LED2, OFF);
+
+	/* Enable LOW_PWR handshake */
+	tps65010_set_low_pwr(ON);
+
+	/* Switch VLDO2 to 3.0V for AIC23 */
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+			| TPS_LDO1_ENABLE);
+
+	/* register these three LEDs */
+	osk5912_tps_leds.dev.parent = &client->dev;
+	platform_device_register(&osk5912_tps_leds);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= OSK_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= osk_tps_setup,
+};
+
+static struct i2c_board_info __initdata osk_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("tps65010", 0x48),
+		.platform_data	= &tps_board,
+
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic23", 0x1B),
+	},
+	/* TODO when driver support is ready:
+	 *  - optionally on Mistral, ov9640 camera sensor at 0x30
+	 */
+};
+
+static void __init osk_init_smc91x(void)
+{
+	u32 l;
+
+	if ((gpio_request(0, "smc_irq")) < 0) {
+		printk("Error requesting gpio 0 for smc91x irq\n");
+		return;
+	}
+
+	/* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */
+	l = omap_readl(EMIFS_CCS(1));
+	l |= 0x3;
+	omap_writel(l, EMIFS_CCS(1));
+}
+
+static void __init osk_init_cf(void)
+{
+	omap_cfg_reg(M7_1610_GPIO62);
+	if ((gpio_request(62, "cf_irq")) < 0) {
+		printk("Error requesting gpio 62 for CF irq\n");
+		return;
+	}
+	/* the CF I/O IRQ is really active-low */
+	irq_set_irq_type(gpio_to_irq(62), IRQ_TYPE_EDGE_FALLING);
+}
+
+static struct omap_usb_config osk_usb_config __initdata = {
+	/* has usb host connector (A) ... for development it can also
+	 * be used, with a NONSTANDARD gender-bending cable/dongle, as
+	 * a peripheral.
+	 */
+#if IS_ENABLED(CONFIG_USB_OMAP)
+	.register_dev	= 1,
+	.hmc_mode	= 0,
+#else
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.rwc		= 1,
+#endif
+	.pins[0]	= 2,
+};
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+static struct omap_lcd_config osk_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+#endif
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+
+#include <linux/input.h>
+#include <linux/platform_data/at24.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <linux/platform_data/keypad-omap.h>
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
+	{
+		/* NOTE:  powered from LCD supply */
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data	= &at24c04,
+	},
+	/* TODO when driver support is ready:
+	 *  - optionally ov9640 camera sensor at 0x30
+	 */
+};
+
+static const unsigned int osk_keymap[] = {
+	/* KEY(col, row, code) */
+	KEY(0, 0, KEY_F1),		/* SW4 */
+	KEY(3, 0, KEY_UP),		/* (sw2/up) */
+	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
+	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
+	KEY(0, 2, KEY_SPACE),		/* SW3 */
+	KEY(1, 2, KEY_ESC),		/* SW6 */
+	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
+	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
+	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
+};
+
+static const struct matrix_keymap_data osk_keymap_data = {
+	.keymap		= osk_keymap,
+	.keymap_size	= ARRAY_SIZE(osk_keymap),
+};
+
+static struct omap_kp_platform_data osk_kp_data = {
+	.rows		= 8,
+	.cols		= 8,
+	.keymap_data	= &osk_keymap_data,
+	.delay		= 9,
+};
+
+static struct resource osk5912_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &osk_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
+	.resource	= osk5912_kp_resources,
+};
+
+static struct omap_backlight_config mistral_bl_data = {
+	.default_intensity	= 0xa0,
+};
+
+static struct platform_device mistral_bl_device = {
+	.name		= "omap-bl",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &mistral_bl_data,
+	},
+};
+
+static struct platform_device osk5912_lcd_device = {
+	.name		= "lcd_osk",
+	.id		= -1,
+};
+
+static struct gpio_led mistral_gpio_led_pins[] = {
+	{
+		.name		= "mistral:red",
+		.default_trigger = "heartbeat",
+		.gpio		= 3,
+	},
+	{
+		.name		= "mistral:green",
+		.default_trigger = "cpu0",
+		.gpio		= OMAP_MPUIO(4),
+	},
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+	.leds		= mistral_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mistral_gpio_led_data,
+	},
+};
+
+static struct platform_device *mistral_devices[] __initdata = {
+	&osk5912_kp_device,
+	&mistral_bl_device,
+	&osk5912_lcd_device,
+	&mistral_gpio_leds,
+};
+
+static int mistral_get_pendown_state(void)
+{
+	return !gpio_get_value(4);
+}
+
+static const struct ads7846_platform_data mistral_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= mistral_get_pendown_state,
+};
+
+static struct spi_board_info __initdata mistral_boardinfo[] = { {
+	/* MicroWire (bus 2) CS0 has an ads7846e */
+	.modalias		= "ads7846",
+	.platform_data		= &mistral_ts_info,
+	.max_speed_hz		= 120000 /* max sample rate at 3V */
+					* 26 /* command + data + overhead */,
+	.bus_num		= 2,
+	.chip_select		= 0,
+} };
+
+#ifdef	CONFIG_PM
+static irqreturn_t
+osk_mistral_wake_interrupt(int irq, void *ignored)
+{
+	return IRQ_HANDLED;
+}
+#endif
+
+static void __init osk_mistral_init(void)
+{
+	/* NOTE:  we could actually tell if there's a Mistral board
+	 * attached, e.g. by trying to read something from the ads7846.
+	 * But this arch_init() code is too early for that, since we
+	 * can't talk to the ads or even the i2c eeprom.
+	 */
+
+	/* parallel camera interface */
+	omap_cfg_reg(J15_1610_CAM_LCLK);
+	omap_cfg_reg(J18_1610_CAM_D7);
+	omap_cfg_reg(J19_1610_CAM_D6);
+	omap_cfg_reg(J14_1610_CAM_D5);
+	omap_cfg_reg(K18_1610_CAM_D4);
+	omap_cfg_reg(K19_1610_CAM_D3);
+	omap_cfg_reg(K15_1610_CAM_D2);
+	omap_cfg_reg(K14_1610_CAM_D1);
+	omap_cfg_reg(L19_1610_CAM_D0);
+	omap_cfg_reg(L18_1610_CAM_VS);
+	omap_cfg_reg(L15_1610_CAM_HS);
+	omap_cfg_reg(M19_1610_CAM_RSTZ);
+	omap_cfg_reg(Y15_1610_CAM_OUTCLK);
+
+	/* serial camera interface */
+	omap_cfg_reg(H19_1610_CAM_EXCLK);
+	omap_cfg_reg(W13_1610_CCP_CLKM);
+	omap_cfg_reg(Y12_1610_CCP_CLKP);
+	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
+	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
+	omap_cfg_reg(W14_1610_CCP_DATAP);
+
+	/* CAM_PWDN */
+	if (gpio_request(11, "cam_pwdn") == 0) {
+		omap_cfg_reg(N20_1610_GPIO11);
+		gpio_direction_output(11, 0);
+	} else
+		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
+
+
+	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
+	gpio_request(6, "ts_busy");
+	gpio_direction_input(6);
+
+	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
+	gpio_request(4, "ts_int");
+	gpio_direction_input(4);
+	irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING);
+
+	mistral_boardinfo[0].irq = gpio_to_irq(4);
+	spi_register_board_info(mistral_boardinfo,
+			ARRAY_SIZE(mistral_boardinfo));
+
+	/* the sideways button (SW1) is for use as a "wakeup" button
+	 *
+	 * NOTE:  The Mistral board has the wakeup button (SW1) wired
+	 * to the LCD 3.3V rail, which is powered down during suspend.
+	 * To allow this button to wake up the omap, work around this
+	 * HW bug by rewiring SW1 to use the main 3.3V rail.
+	 */
+	omap_cfg_reg(N15_1610_MPUIO2);
+	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
+		int ret = 0;
+		int irq = gpio_to_irq(OMAP_MPUIO(2));
+
+		gpio_direction_input(OMAP_MPUIO(2));
+		irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+#ifdef	CONFIG_PM
+		/* share the IRQ in case someone wants to use the
+		 * button for more than wakeup from system sleep.
+		 */
+		ret = request_irq(irq,
+				&osk_mistral_wake_interrupt,
+				IRQF_SHARED, "mistral_wakeup",
+				&osk_mistral_wake_interrupt);
+		if (ret != 0) {
+			gpio_free(OMAP_MPUIO(2));
+			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
+				ret);
+		} else
+			enable_irq_wake(irq);
+#endif
+	} else
+		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+
+	/* LCD:  backlight, and power; power controls other devices on the
+	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
+	 */
+	omap_cfg_reg(PWL);
+	if (gpio_request(2, "lcd_pwr") == 0)
+		gpio_direction_output(2, 1);
+
+	/*
+	 * GPIO based LEDs
+	 */
+	omap_cfg_reg(P18_1610_GPIO3);
+	omap_cfg_reg(MPUIO4);
+
+	i2c_register_board_info(1, mistral_i2c_board_info,
+			ARRAY_SIZE(mistral_i2c_board_info));
+
+	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
+}
+#else
+static void __init osk_mistral_init(void) { }
+#endif
+
+#define EMIFS_CS3_VAL	(0x88013141)
+
+static void __init osk_init(void)
+{
+	u32 l;
+
+	osk_init_smc91x();
+	osk_init_cf();
+
+	/* Workaround for wrong CS3 (NOR flash) timing
+	 * There are some U-Boot versions out there which configure
+	 * wrong CS3 memory timings. This mainly leads to CRC
+	 * or similar errors if you use NOR flash (e.g. with JFFS2)
+	 */
+	l = omap_readl(EMIFS_CCS(3));
+	if (l != EMIFS_CS3_VAL)
+		omap_writel(EMIFS_CS3_VAL, EMIFS_CCS(3));
+
+	osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys();
+	osk_flash_resource.end += SZ_32M - 1;
+	osk5912_smc91x_resources[1].start = gpio_to_irq(0);
+	osk5912_smc91x_resources[1].end = gpio_to_irq(0);
+	osk5912_cf_resources[0].start = gpio_to_irq(62);
+	osk5912_cf_resources[0].end = gpio_to_irq(62);
+	platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices));
+
+	l = omap_readl(USB_TRANSCEIVER_CTRL);
+	l |= (3 << 1);
+	omap_writel(l, USB_TRANSCEIVER_CTRL);
+
+	omap1_usb_init(&osk_usb_config);
+
+	/* irq for tps65010 chip */
+	/* bootloader effectively does:  omap_cfg_reg(U19_1610_MPUIO1); */
+	if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0)
+		gpio_direction_input(OMAP_MPUIO(1));
+
+	omap_serial_init();
+	osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1));
+	omap_register_i2c_bus(1, 400, osk_i2c_board_info,
+			      ARRAY_SIZE(osk_i2c_board_info));
+	osk_mistral_init();
+
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
+	omapfb_set_lcd_config(&osk_lcd_config);
+#endif
+
+}
+
+MACHINE_START(OMAP_OSK, "TI-OSK")
+	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
+	.atag_offset	= 0x100,
+	.map_io		= omap16xx_map_io,
+	.init_early	= omap1_init_early,
+	.init_irq	= omap1_init_irq,
+	.init_machine	= osk_init,
+	.init_late	= omap1_init_late,
+	.init_time	= omap1_timer_init,
+	.restart	= omap1_restart,
+MACHINE_END