Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 630 insertions, 0 deletions

diff --git a/kernel/arch/arm/mach-imx/Kconfig b/kernel/arch/arm/mach-imx/Kconfig
new file mode 100644
index 000000000..3a3d3e9d7
--- /dev/null
+++ b/kernel/arch/arm/mach-imx/Kconfig
@@ -0,0 +1,630 @@
+menuconfig ARCH_MXC
+	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
+	select CLKSRC_MMIO
+	select GENERIC_IRQ_CHIP
+	select PINCTRL
+	select PM_OPP if PM
+	select SOC_BUS
+	select SRAM
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+if ARCH_MXC
+
+config MXC_TZIC
+	bool
+
+config MXC_AVIC
+	bool
+
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
+config HAVE_EPIT
+	bool
+
+config MXC_USE_EPIT
+	bool "Use EPIT instead of GPT"
+	depends on HAVE_EPIT
+	help
+	  Use EPIT as the system timer on systems that have it. Normally you
+	  don't have a reason to do so as the EPIT has the same features and
+	  uses the same clocks as the GPT. Anyway, on some systems the GPT
+	  may be in use for other purposes.
+
+config ARCH_HAS_RNGA
+	bool
+
+config HAVE_IMX_ANATOP
+	bool
+
+config HAVE_IMX_GPC
+	bool
+	select PM_GENERIC_DOMAINS if PM
+
+config HAVE_IMX_MMDC
+	bool
+
+config HAVE_IMX_SRC
+	def_bool y if SMP
+	select ARCH_HAS_RESET_CONTROLLER
+
+config IMX_HAVE_IOMUX_V1
+	bool
+
+config ARCH_MXC_IOMUX_V3
+	bool
+
+config SOC_IMX1
+	bool
+	select CPU_ARM920T
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+	select PINCTRL_IMX1
+
+config SOC_IMX21
+	bool
+	select CPU_ARM926T
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+
+config SOC_IMX27
+	bool
+	select CPU_ARM926T
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+	select PINCTRL_IMX27
+
+config SOC_IMX31
+	bool
+	select CPU_V6
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select MXC_AVIC
+	select SMP_ON_UP if SMP
+
+config SOC_IMX35
+	bool
+	select ARCH_MXC_IOMUX_V3
+	select HAVE_EPIT
+	select MXC_AVIC
+	select PINCTRL_IMX35
+	select SMP_ON_UP if SMP
+
+if ARCH_MULTI_V4T
+
+comment "MX1 platforms:"
+
+config MACH_SCB9328
+	bool "Synertronixx scb9328"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
+	help
+	  Say Y here if you are using a Synertronixx scb9328 board
+
+config MACH_APF9328
+	bool "APF9328"
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
+	help
+	  Say Yes here if you are using the Armadeus APF9328 development board
+
+config MACH_IMX1_DT
+	bool "Support i.MX1 platforms from device tree"
+	select SOC_IMX1
+	help
+	  Include support for Freescale i.MX1 based platforms
+	  using the device tree for discovery.
+
+endif
+
+if ARCH_MULTI_V5
+
+comment "MX21 platforms:"
+
+config MACH_MX21ADS
+	bool "MX21ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX21
+	help
+	  Include support for MX21ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "MX27 platforms:"
+
+config MACH_MX27ADS
+	bool "MX27ADS platform"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select SOC_IMX27
+	help
+	  Include support for MX27ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX27_3DS
+	bool "MX27PDK platform"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MX2_CAMERA
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX27
+	help
+	  Include support for MX27PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX27_VISSTRIM_M10
+	bool "Vista Silicon i.MX27 Visstrim_m10"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MX2_CAMERA
+	select IMX_HAVE_PLATFORM_MX2_EMMA
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select LEDS_GPIO_REGISTER
+	select SOC_IMX27
+	help
+	  Include support for Visstrim_m10 platform and its different variants.
+	  This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
+config MACH_IMX27_DT
+	bool "Support i.MX27 platforms from device tree"
+	select SOC_IMX27
+	help
+	  Include support for Freescale i.MX27 based platforms
+	  using the device tree for discovery
+
+endif
+
+if ARCH_MULTI_V6
+
+comment "MX31 platforms:"
+
+config MACH_MX31ADS
+	bool "Support MX31ADS platforms"
+	default y
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for MX31ADS platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31ADS_WM1133_EV1
+	bool "Support Wolfson Microelectronics 1133-EV1 module"
+	depends on MACH_MX31ADS
+	depends on MFD_WM8350_I2C
+	depends on REGULATOR_WM8350 = y
+	help
+	  Include support for the Wolfson Microelectronics 1133-EV1 PMU
+	  and audio module for the MX31ADS platform.
+
+config MACH_MX31LILLY
+	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for mx31 based LILLY1131 modules. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX31LITE
+	bool "Support MX31 LITEKIT (LogicPD)"
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for MX31 LITEKIT platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_PCM037
+	bool "Support Phytec pcm037 (i.MX31) platforms"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for Phytec pcm037 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_PCM037_EET
+	bool "Support pcm037 EET board extensions"
+	depends on MACH_PCM037
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Add support for PCM037 EET baseboard extensions. If you are using the
+	  OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+	  command-line parameter.
+
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+	bool "Make the MXC NAND driver use the in flash Bad Block Table"
+	depends on MACH_MX31_3DS
+	depends on MTD_NAND_MXC
+	help
+	  Enable this if you want that the MXC NAND driver uses the in flash
+	  Bad Block Table to know what blocks are bad instead of scanning the
+	  entire flash looking for bad block markers.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_QONG
+	bool "Support Dave/DENX QongEVB-LITE platform"
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for Dave/DENX QongEVB-LITE platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+	bool "Support Atmark Armadillo-500 Development Base Board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX31
+	help
+	  Include support for Atmark Armadillo-500 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_BUG
+	bool "Support Buglabs BUGBase platform"
+	default y
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
+	help
+	  Include support for BUGBase 1.3 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_IMX31_DT
+	bool "Support i.MX31 platforms from device tree"
+	select SOC_IMX31
+	help
+	  Include support for Freescale i.MX31 based platforms
+	  using the device tree for discovery.
+
+comment "MX35 platforms:"
+
+config MACH_IMX35_DT
+	bool "Support i.MX35 platforms from device tree"
+	select SOC_IMX35
+	help
+	  Include support for Freescale i.MX35 based platforms
+	  using the device tree for discovery.
+
+config MACH_PCM043
+	bool "Support Phytec pcm043 (i.MX35) platforms"
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX35
+	help
+	  Include support for Phytec pcm043 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+	bool "Support MX35PDK platform"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_RTC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_DEBUG_BOARD
+	select SOC_IMX35
+	help
+	  Include support for MX35PDK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX35SD
+	bool "Support Eukrea CPUIMX35 Platform"
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select USB_ULPI_VIEWPORT if USB_ULPI
+	select SOC_IMX35
+	help
+	  Include support for Eukrea CPUIMX35 platform. This includes
+	  specific configurations for the board and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX35SD
+	default MACH_EUKREA_MBIMXSD35_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD35_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MACH_VPR200
+	bool "Support VPR200 platform"
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX35
+	help
+	  Include support for VPR200 platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
+
+if ARCH_MULTI_V5
+
+comment "Device tree only"
+
+config SOC_IMX25
+	bool "i.MX25 support"
+	select ARCH_MXC_IOMUX_V3
+	select CPU_ARM926T
+	select MXC_AVIC
+	select PINCTRL_IMX25
+	help
+	  This enables support for Freescale i.MX25 processor
+endif
+
+if ARCH_MULTI_V7
+
+comment "Device tree only"
+
+config SOC_IMX5
+	bool
+	select HAVE_IMX_SRC
+	select MXC_TZIC
+
+config	SOC_IMX50
+	bool "i.MX50 support"
+	select PINCTRL_IMX50
+	select SOC_IMX5
+
+	help
+	  This enables support for Freescale i.MX50 processor.
+
+config SOC_IMX51
+	bool "i.MX51 support"
+	select PINCTRL_IMX51
+	select SOC_IMX5
+	help
+	  This enables support for Freescale i.MX51 processor
+
+config	SOC_IMX53
+	bool "i.MX53 support"
+	select PINCTRL_IMX53
+	select SOC_IMX5
+
+	help
+	  This enables support for Freescale i.MX53 processor.
+
+config SOC_IMX6
+	bool
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
+	select ARM_GIC
+	select HAVE_IMX_ANATOP
+	select HAVE_IMX_GPC
+	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
+	select MFD_SYSCON
+	select PL310_ERRATA_769419 if CACHE_L2X0
+
+config SOC_IMX6Q
+	bool "i.MX6 Quad/DualLite support"
+	select ARM_ERRATA_764369 if SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select PCI_DOMAINS if PCI
+	select PINCTRL_IMX6Q
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 Quad processor.
+
+config SOC_IMX6SL
+	bool "i.MX6 SoloLite support"
+	select PINCTRL_IMX6SL
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 SoloLite processor.
+
+config SOC_IMX6SX
+	bool "i.MX6 SoloX support"
+	select PINCTRL_IMX6SX
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 SoloX processor.
+
+config SOC_VF610
+	bool "Vybrid Family VF610 support"
+	select IRQ_DOMAIN_HIERARCHY
+	select ARM_GIC
+	select PINCTRL_VF610
+	select PL310_ERRATA_769419 if CACHE_L2X0
+	select SMP_ON_UP if SMP
+
+	help
+	  This enables support for Freescale Vybrid VF610 processor.
+
+choice
+	prompt "Clocksource for scheduler clock"
+	depends on SOC_VF610
+	default VF_USE_ARM_GLOBAL_TIMER
+
+	config VF_USE_ARM_GLOBAL_TIMER
+		bool "Use ARM Global Timer"
+		select ARM_GLOBAL_TIMER
+		select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+		help
+		  Use the ARM Global Timer as clocksource
+
+	config VF_USE_PIT_TIMER
+		bool "Use PIT timer"
+		select VF_PIT_TIMER
+		help
+		  Use SoC Periodic Interrupt Timer (PIT) as clocksource
+
+endchoice
+
+config SOC_LS1021A
+	bool "Freescale LS1021A support"
+	select ARM_GIC
+	select HAVE_ARM_ARCH_TIMER
+	select PCI_DOMAINS if PCI
+	select ZONE_DMA if ARM_LPAE
+
+	help
+	  This enables support for Freescale LS1021A processor.
+
+endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endif