These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 54 deletions

diff --git a/kernel/arch/arm/mach-ep93xx/Kconfig b/kernel/arch/arm/mach-ep93xx/Kconfig
index bec570ae6..61a75ca36 100644
--- a/kernel/arch/arm/mach-ep93xx/Kconfig
+++ b/kernel/arch/arm/mach-ep93xx/Kconfig
@@ -15,45 +15,8 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
-choice
-	prompt "EP93xx first SDRAM bank selection"
-	default EP93XX_SDCE3_SYNC_PHYS_OFFSET
-
-config EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	bool "0x00000000 - SDCE3/SyncBoot"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000.
-
-config EP93XX_SDCE0_PHYS_OFFSET
-	bool "0xc0000000 - SDCEO"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000.
-
-config EP93XX_SDCE1_PHYS_OFFSET
-	bool "0xd0000000 - SDCE1"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xd0000000.
-
-config EP93XX_SDCE2_PHYS_OFFSET
-	bool "0xe0000000 - SDCE2"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xe0000000.
-
-config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	bool "0xf0000000 - SDCE3/AsyncBoot"
-	help
-	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xf0000000.
-
-endchoice
-
 config MACH_ADSSPHERE
 	bool "Support ADS Sphere"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the ADS
 	  Sphere board.
@@ -63,7 +26,6 @@ config MACH_EDB93XX
 
 config MACH_EDB9301
 	bool "Support Cirrus Logic EDB9301"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -71,7 +33,6 @@ config MACH_EDB9301
 
 config MACH_EDB9302
 	bool "Support Cirrus Logic EDB9302"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -79,7 +40,6 @@ config MACH_EDB9302
 
 config MACH_EDB9302A
 	bool "Support Cirrus Logic EDB9302A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -87,7 +47,6 @@ config MACH_EDB9302A
 
 config MACH_EDB9307
 	bool "Support Cirrus Logic EDB9307"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -95,7 +54,6 @@ config MACH_EDB9307
 
 config MACH_EDB9307A
 	bool "Support Cirrus Logic EDB9307A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -103,7 +61,6 @@ config MACH_EDB9307A
 
 config MACH_EDB9312
 	bool "Support Cirrus Logic EDB9312"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -111,7 +68,6 @@ config MACH_EDB9312
 
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
@@ -119,14 +75,12 @@ config MACH_EDB9315
 
 config MACH_EDB9315A
 	bool "Support Cirrus Logic EDB9315A"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	select MACH_EDB93XX
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "Support Glomation GESBC-9312-sx"
 	help
 	  Say 'Y' here if you want your kernel to support the Glomation
@@ -137,7 +91,6 @@ config MACH_MICRO9
 
 config MACH_MICRO9H
 	bool "Support Contec Micro9-High"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -145,7 +98,6 @@ config MACH_MICRO9H
 
 config MACH_MICRO9M
 	bool "Support Contec Micro9-Mid"
-	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -153,7 +105,6 @@ config MACH_MICRO9M
 
 config MACH_MICRO9L
 	bool "Support Contec Micro9-Lite"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -161,7 +112,6 @@ config MACH_MICRO9L
 
 config MACH_MICRO9S
 	bool "Support Contec Micro9-Slim"
-	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
@@ -169,28 +119,24 @@ config MACH_MICRO9S
 
 config MACH_SIM_ONE
         bool "Support Simplemachines Sim.One board"
-        depends on EP93XX_SDCE0_PHYS_OFFSET
         help
           Say 'Y' here if you want your kernel to support the
           Simplemachines Sim.One board.
 
 config MACH_SNAPPER_CL15
 	bool "Support Bluewater Systems Snapper CL15 Module"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the Bluewater
 	  Systems Snapper CL15 Module.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
 
 config MACH_VISION_EP9307
 	bool "Support Vision Engraving Systems EP9307 SoM"
-	depends on EP93XX_SDCE0_PHYS_OFFSET
 	help
 	  Say 'Y' here if you want your kernel to support the
 	  Vision Engraving Systems EP9307 SoM.