These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

16 files changed, 123 insertions, 447 deletions

diff --git a/kernel/arch/arm/mach-at91/Kconfig b/kernel/arch/arm/mach-at91/Kconfig
index fd95f3494..3f501305c 100644
--- a/kernel/arch/arm/mach-at91/Kconfig
+++ b/kernel/arch/arm/mach-at91/Kconfig
@@ -4,10 +4,22 @@ menuconfig ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
 	select PINCTRL
-	select PINCTRL_AT91
 	select SOC_BUS
 
 if ARCH_AT91
+config SOC_SAMA5D2
+	bool "SAMA5D2 family" if ARCH_MULTI_V7
+	select SOC_SAMA5
+	select CACHE_L2X0
+	select HAVE_FB_ATMEL
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	select HAVE_AT91_GENERATED_CLK
+	select PINCTRL_AT91PIO4
+	help
+	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
+
 config SOC_SAMA5D3
 	bool "SAMA5D3 family" if ARCH_MULTI_V7
 	select SOC_SAMA5
@@ -15,6 +27,7 @@ config SOC_SAMA5D3
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
@@ -28,6 +41,7 @@ config SOC_SAMA5D4
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 
@@ -38,6 +52,7 @@ config SOC_AT91RM9200
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
 	select MIGHT_HAVE_PCI
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
@@ -53,6 +68,7 @@ config SOC_AT91SAM9
 	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
 	select MEMORY
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
@@ -83,6 +99,7 @@ config HAVE_AT91_USB_CLK
 config COMMON_CLK_AT91
 	bool
 	select COMMON_CLK
+	select MFD_SYSCON
 
 config HAVE_AT91_SMD
 	bool
@@ -90,6 +107,9 @@ config HAVE_AT91_SMD
 config HAVE_AT91_H32MX
 	bool
 
+config HAVE_AT91_GENERATED_CLK
+	bool
+
 config SOC_SAM_V4_V5
 	bool
 
diff --git a/kernel/arch/arm/mach-at91/Makefile b/kernel/arch/arm/mach-at91/Makefile
index 4fa8b4541..c5bbf8bb8 100644
--- a/kernel/arch/arm/mach-at91/Makefile
+++ b/kernel/arch/arm/mach-at91/Makefile
@@ -1,13 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
 obj-y		:= soc.o
 
-obj-$(CONFIG_SOC_AT91SAM9)	+= sam9_smc.o
-
 # CPU-specific support
 obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
 obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
diff --git a/kernel/arch/arm/mach-at91/Makefile.boot b/kernel/arch/arm/mach-at91/Makefile.boot
deleted file mode 100644
index 29ed0fa37..000000000
--- a/kernel/arch/arm/mach-at91/Makefile.boot
+++ /dev/null
@@ -1,8 +0,0 @@
-# Note: the following conditions must always be true:
-#   ZRELADDR == virt_to_phys(TEXTADDR)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-
-   zreladdr-y	+= 0x20008000
-params_phys-y	:= 0x20000100
-initrd_phys-y	:= 0x20410000
diff --git a/kernel/arch/arm/mach-at91/at91rm9200.c b/kernel/arch/arm/mach-at91/at91rm9200.c
index eaf58f88e..63b4fa25b 100644
--- a/kernel/arch/arm/mach-at91/at91rm9200.c
+++ b/kernel/arch/arm/mach-at91/at91rm9200.c
@@ -8,12 +8,10 @@
  * Licensed under GPLv2 or later.
  */
 
-#include <linux/clk-provider.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/system_misc.h>
 
 #include "generic.h"
 #include "soc.h"
@@ -34,11 +32,10 @@ static void __init at91rm9200_dt_device_init(void)
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
 
-	arm_pm_idle = at91rm9200_idle;
 	at91rm9200_pm_init();
 }
 
-static const char *at91rm9200_dt_board_compat[] __initconst = {
+static const char *const at91rm9200_dt_board_compat[] __initconst = {
 	"atmel,at91rm9200",
 	NULL
 };
diff --git a/kernel/arch/arm/mach-at91/at91sam9.c b/kernel/arch/arm/mach-at91/at91sam9.c
index e47a2093a..cada2a641 100644
--- a/kernel/arch/arm/mach-at91/at91sam9.c
+++ b/kernel/arch/arm/mach-at91/at91sam9.c
@@ -62,8 +62,6 @@ static void __init at91sam9_common_init(void)
 		soc_dev = soc_device_to_device(soc);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-
-	arm_pm_idle = at91sam9_idle;
 }
 
 static void __init at91sam9_dt_device_init(void)
@@ -72,7 +70,7 @@ static void __init at91sam9_dt_device_init(void)
 	at91sam9260_pm_init();
 }
 
-static const char *at91_dt_board_compat[] __initconst = {
+static const char *const at91_dt_board_compat[] __initconst = {
 	"atmel,at91sam9",
 	NULL
 };
@@ -89,7 +87,7 @@ static void __init at91sam9g45_dt_device_init(void)
 	at91sam9g45_pm_init();
 }
 
-static const char *at91sam9g45_board_compat[] __initconst = {
+static const char *const at91sam9g45_board_compat[] __initconst = {
 	"atmel,at91sam9g45",
 	NULL
 };
@@ -106,7 +104,7 @@ static void __init at91sam9x5_dt_device_init(void)
 	at91sam9x5_pm_init();
 }
 
-static const char *at91sam9x5_board_compat[] __initconst = {
+static const char *const at91sam9x5_board_compat[] __initconst = {
 	"atmel,at91sam9x5",
 	"atmel,at91sam9n12",
 	NULL
diff --git a/kernel/arch/arm/mach-at91/generic.h b/kernel/arch/arm/mach-at91/generic.h
index b0fa7dc72..28ca57a20 100644
--- a/kernel/arch/arm/mach-at91/generic.h
+++ b/kernel/arch/arm/mach-at91/generic.h
@@ -11,27 +11,18 @@
 #ifndef _AT91_GENERIC_H
 #define _AT91_GENERIC_H
 
-#include <linux/of.h>
-#include <linux/reboot.h>
-
- /* Map io */
-extern void __init at91_map_io(void);
-extern void __init at91_alt_map_io(void);
-
-/* idle */
-extern void at91rm9200_idle(void);
-extern void at91sam9_idle(void);
-
 #ifdef CONFIG_PM
 extern void __init at91rm9200_pm_init(void);
 extern void __init at91sam9260_pm_init(void);
 extern void __init at91sam9g45_pm_init(void);
 extern void __init at91sam9x5_pm_init(void);
+extern void __init sama5_pm_init(void);
 #else
 static inline void __init at91rm9200_pm_init(void) { }
 static inline void __init at91sam9260_pm_init(void) { }
 static inline void __init at91sam9g45_pm_init(void) { }
 static inline void __init at91sam9x5_pm_init(void) { }
+static inline void __init sama5_pm_init(void) { }
 #endif
 
 #endif /* _AT91_GENERIC_H */
diff --git a/kernel/arch/arm/mach-at91/include/mach/at91_ramc.h b/kernel/arch/arm/mach-at91/include/mach/at91_ramc.h
deleted file mode 100644
index 493bc486e..000000000
--- a/kernel/arch/arm/mach-at91/include/mach/at91_ramc.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Header file for the Atmel RAM Controller
- *
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-
-#ifndef __AT91_RAMC_H__
-#define __AT91_RAMC_H__
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_ramc_base[];
-
-#define at91_ramc_read(id, field) \
-	__raw_readl(at91_ramc_base[id] + field)
-
-#define at91_ramc_write(id, field, value) \
-	__raw_writel(value, at91_ramc_base[id] + field)
-#else
-.extern at91_ramc_base
-#endif
-
-#include <soc/at91/at91rm9200_sdramc.h>
-#include <soc/at91/at91sam9_ddrsdr.h>
-#include <soc/at91/at91sam9_sdramc.h>
-
-#endif /* __AT91_RAMC_H__ */
diff --git a/kernel/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/kernel/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
deleted file mode 100644
index aeaadfb45..000000000
--- a/kernel/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		0x00			/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		0x04			/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		0x08			/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		0x0c			/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		0x60			/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(0x70 + ((n) * 4))	/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		0xc0			/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/kernel/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/kernel/arch/arm/mach-at91/include/mach/at91sam9_smc.h
deleted file mode 100644
index ff54a0ce9..000000000
--- a/kernel/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_smc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * Static Memory Controllers (SMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SMC_H
-#define AT91SAM9_SMC_H
-
-#ifndef __ASSEMBLY__
-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
-extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
-#endif
-
-#define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE		0x04				/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE		0x08				/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE		0x0c				/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#endif
diff --git a/kernel/arch/arm/mach-at91/pm.c b/kernel/arch/arm/mach-at91/pm.c
index 5062699cb..f06270198 100644
--- a/kernel/arch/arm/mach-at91/pm.c
+++ b/kernel/arch/arm/mach-at91/pm.c
@@ -31,18 +31,23 @@
 #include <asm/mach/irq.h>
 #include <asm/fncpy.h>
 #include <asm/cacheflush.h>
+#include <asm/system_misc.h>
 
 #include "generic.h"
 #include "pm.h"
 
+static void __iomem *pmc;
+
 /*
  * FIXME: this is needed to communicate between the pinctrl driver and
  * the PM implementation in the machine. Possibly part of the PM
  * implementation should be moved down into the pinctrl driver and get
  * called as part of the generic suspend/resume path.
  */
+#ifdef CONFIG_PINCTRL_AT91
 extern void at91_pinctrl_gpio_suspend(void);
 extern void at91_pinctrl_gpio_resume(void);
+#endif
 
 static struct {
 	unsigned long uhp_udp_mask;
@@ -85,7 +90,7 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = at91_pmc_read(AT91_PMC_SCSR);
+	scsr = readl(pmc + AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
 	if ((scsr & at91_pm_data.uhp_udp_mask) != 0) {
@@ -99,8 +104,7 @@ static int at91_pm_verify_clocks(void)
 
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
-
-		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = readl(pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -143,16 +147,17 @@ static void at91_pm_suspend(suspend_state_t state)
 	flush_cache_all();
 	outer_disable();
 
-	at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
-				at91_ramc_base[1], pm_data);
+	at91_suspend_sram_fn(pmc, at91_ramc_base[0],
+			     at91_ramc_base[1], pm_data);
 
 	outer_resume();
 }
 
 static int at91_pm_enter(suspend_state_t state)
 {
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_suspend();
-
+#endif
 	switch (state) {
 	/*
 	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -192,7 +197,9 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_resume();
+#endif
 	return 0;
 }
 
@@ -233,7 +240,7 @@ static void at91_pm_set_standby(void (*at91_standby)(void))
  */
 static void at91rm9200_standby(void)
 {
-	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+	u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR);
 
 	asm volatile(
 		"b    1f\n\t"
@@ -244,8 +251,8 @@ static void at91rm9200_standby(void)
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
-		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR),
+		  "r" (1), "r" (AT91_MC_SDRAMC_SRR),
 		  "r" (lpr));
 }
 
@@ -311,7 +318,7 @@ static void at91sam9_sdram_standby(void)
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
-static const struct of_device_id ramc_ids[] __initconst = {
+static const struct of_device_id const ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
@@ -348,6 +355,21 @@ static __init void at91_dt_ramc(void)
 	at91_pm_set_standby(standby);
 }
 
+void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+}
+
+void at91sam9_idle(void)
+{
+	writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR);
+	cpu_do_idle();
+}
+
 static void __init at91_pm_sram_init(void)
 {
 	struct gen_pool *sram_pool;
@@ -369,7 +391,7 @@ static void __init at91_pm_sram_init(void)
 		return;
 	}
 
-	sram_pool = dev_get_gen_pool(&pdev->dev);
+	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
 		return;
@@ -394,13 +416,36 @@ static void __init at91_pm_sram_init(void)
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
 }
 
-static void __init at91_pm_init(void)
+static const struct of_device_id atmel_pmc_ids[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-pmc"  },
+	{ .compatible = "atmel,at91sam9260-pmc" },
+	{ .compatible = "atmel,at91sam9g45-pmc" },
+	{ .compatible = "atmel,at91sam9n12-pmc" },
+	{ .compatible = "atmel,at91sam9x5-pmc" },
+	{ .compatible = "atmel,sama5d3-pmc" },
+	{ .compatible = "atmel,sama5d2-pmc" },
+	{ /* sentinel */ },
+};
+
+static void __init at91_pm_init(void (*pm_idle)(void))
 {
-	at91_pm_sram_init();
+	struct device_node *pmc_np;
 
 	if (at91_cpuidle_device.dev.platform_data)
 		platform_device_register(&at91_cpuidle_device);
 
+	pmc_np = of_find_matching_node(NULL, atmel_pmc_ids);
+	pmc = of_iomap(pmc_np, 0);
+	if (!pmc) {
+		pr_err("AT91: PM not supported, PMC not found\n");
+		return;
+	}
+
+	if (pm_idle)
+		arm_pm_idle = pm_idle;
+
+	at91_pm_sram_init();
+
 	if (at91_suspend_sram_fn)
 		suspend_set_ops(&at91_pm_ops);
 	else
@@ -414,12 +459,12 @@ void __init at91rm9200_pm_init(void)
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
 	 */
-	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
+	at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
 
 	at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_MC;
 
-	at91_pm_init();
+	at91_pm_init(at91rm9200_idle);
 }
 
 void __init at91sam9260_pm_init(void)
@@ -427,7 +472,7 @@ void __init at91sam9260_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9g45_pm_init(void)
@@ -435,7 +480,7 @@ void __init at91sam9g45_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
 }
 
 void __init at91sam9x5_pm_init(void)
@@ -443,5 +488,13 @@ void __init at91sam9x5_pm_init(void)
 	at91_dt_ramc();
 	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
 	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
-	return at91_pm_init();
+	at91_pm_init(at91sam9_idle);
+}
+
+void __init sama5_pm_init(void)
+{
+	at91_dt_ramc();
+	at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
+	at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
+	at91_pm_init(NULL);
 }
diff --git a/kernel/arch/arm/mach-at91/pm.h b/kernel/arch/arm/mach-at91/pm.h
index ecd875a91..3fcf8810f 100644
--- a/kernel/arch/arm/mach-at91/pm.h
+++ b/kernel/arch/arm/mach-at91/pm.h
@@ -13,7 +13,19 @@
 
 #include <asm/proc-fns.h>
 
-#include <mach/at91_ramc.h>
+#include <linux/mfd/syscon/atmel-mc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+	__raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+	__raw_writel(value, at91_ramc_base[id] + field)
+#endif
 
 #define AT91_MEMCTRL_MC		0
 #define AT91_MEMCTRL_SDRAMC	1
diff --git a/kernel/arch/arm/mach-at91/pm_suspend.S b/kernel/arch/arm/mach-at91/pm_suspend.S
index bd22b2c8a..a25defda3 100644
--- a/kernel/arch/arm/mach-at91/pm_suspend.S
+++ b/kernel/arch/arm/mach-at91/pm_suspend.S
@@ -13,7 +13,6 @@
  */
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
-#include <mach/at91_ramc.h>
 #include "pm.h"
 
 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
@@ -81,6 +80,8 @@ tmp2	.req	r5
  *	@r2: base address of second SDRAM Controller or 0 if not present
  *	@r3: pm information
  */
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+	.align 3
 ENTRY(at91_pm_suspend_in_sram)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}
@@ -216,7 +217,7 @@ ENTRY(at91_sramc_self_refresh)
 
 	/* Active SDRAM self-refresh mode */
 	mov	r3, #1
-	str	r3, [r2, #AT91RM9200_SDRAMC_SRR]
+	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
 	b	exit_sramc_sf
 
 ddrc_sf:
diff --git a/kernel/arch/arm/mach-at91/sam9_smc.c b/kernel/arch/arm/mach-at91/sam9_smc.c
deleted file mode 100644
index 826315af6..000000000
--- a/kernel/arch/arm/mach-at91/sam9_smc.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.c
- *
- * Copyright (C) 2008 Andrew Victor
- * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-
-
-#define AT91_SMC_CS(id, n)	(smc_base_addr[id] + ((n) * 0x10))
-
-static void __iomem *smc_base_addr[2];
-
-static void sam9_smc_cs_write_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
-}
-
-void sam9_smc_write_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_write_mode);
-
-static void sam9_smc_cs_configure(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-
-	/* Setup register */
-	__raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup)
-		   | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup)
-		   | AT91_SMC_NRDSETUP_(config->nrd_setup)
-		   | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup),
-		   base + AT91_SMC_SETUP);
-
-	/* Pulse register */
-	__raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse)
-		   | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse)
-		   | AT91_SMC_NRDPULSE_(config->nrd_pulse)
-		   | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse),
-		   base + AT91_SMC_PULSE);
-
-	/* Cycle register */
-	__raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle)
-		   | AT91_SMC_NRDCYCLE_(config->read_cycle),
-		   base + AT91_SMC_CYCLE);
-
-	/* Mode register */
-	sam9_smc_cs_write_mode(base, config);
-}
-
-void sam9_smc_configure(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_configure);
-
-static void sam9_smc_cs_read_mode(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val = __raw_readl(base + AT91_SMC_MODE);
-
-	config->mode = (val & ~AT91_SMC_NWECYCLE);
-	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
-}
-
-void sam9_smc_read_mode(int id, int cs,
-					struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
-}
-EXPORT_SYMBOL_GPL(sam9_smc_read_mode);
-
-static void sam9_smc_cs_read(void __iomem *base,
-					struct sam9_smc_config *config)
-{
-	u32 val;
-
-	/* Setup register */
-	val = __raw_readl(base + AT91_SMC_SETUP);
-
-	config->nwe_setup = val & AT91_SMC_NWESETUP;
-	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
-	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
-	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
-
-	/* Pulse register */
-	val = __raw_readl(base + AT91_SMC_PULSE);
-
-	config->nwe_pulse = val & AT91_SMC_NWEPULSE;
-	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
-	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
-	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
-
-	/* Cycle register */
-	val = __raw_readl(base + AT91_SMC_CYCLE);
-
-	config->write_cycle = val & AT91_SMC_NWECYCLE;
-	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
-
-	/* Mode register */
-	sam9_smc_cs_read_mode(base, config);
-}
-
-void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
-{
-	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
-}
-
-void __init at91sam9_ioremap_smc(int id, u32 addr)
-{
-	if (id > 1) {
-		pr_warn("%s: id > 2\n", __func__);
-		return;
-	}
-	smc_base_addr[id] = ioremap(addr, 512);
-	if (!smc_base_addr[id])
-		pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr);
-}
diff --git a/kernel/arch/arm/mach-at91/sam9_smc.h b/kernel/arch/arm/mach-at91/sam9_smc.h
deleted file mode 100644
index 3e52dcd4a..000000000
--- a/kernel/arch/arm/mach-at91/sam9_smc.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/sam9_smc.
- *
- * Copyright (C) 2008 Andrew Victor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/kernel/arch/arm/mach-at91/sama5.c b/kernel/arch/arm/mach-at91/sama5.c
index 41d829d8e..df8fdf1cf 100644
--- a/kernel/arch/arm/mach-at91/sama5.c
+++ b/kernel/arch/arm/mach-at91/sama5.c
@@ -18,6 +18,8 @@
 #include "soc.h"
 
 static const struct at91_soc sama5_socs[] = {
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27_EXID_MATCH,
+		 "sama5d27", "sama5d2"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
 		 "sama5d31", "sama5d3"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
@@ -49,10 +51,10 @@ static void __init sama5_dt_device_init(void)
 		soc_dev = soc_device_to_device(soc);
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
-	at91sam9x5_pm_init();
+	sama5_pm_init();
 }
 
-static const char *sama5_dt_board_compat[] __initconst = {
+static const char *const sama5_dt_board_compat[] __initconst = {
 	"atmel,sama5",
 	NULL
 };
@@ -63,7 +65,8 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
 	.dt_compat	= sama5_dt_board_compat,
 MACHINE_END
 
-static const char *sama5_alt_dt_board_compat[] __initconst = {
+static const char *const sama5_alt_dt_board_compat[] __initconst = {
+	"atmel,sama5d2",
 	"atmel,sama5d4",
 	NULL
 };
diff --git a/kernel/arch/arm/mach-at91/soc.h b/kernel/arch/arm/mach-at91/soc.h
index be23c4005..8ede0ef86 100644
--- a/kernel/arch/arm/mach-at91/soc.h
+++ b/kernel/arch/arm/mach-at91/soc.h
@@ -62,6 +62,9 @@ at91_soc_init(const struct at91_soc *socs);
 #define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
 #define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
 
+#define SAMA5D2_CIDR_MATCH		0x0a5c08c0
+#define SAMA5D27_EXID_MATCH		0x00000021
+
 #define SAMA5D3_CIDR_MATCH		0x0a5c07c0
 #define SAMA5D31_EXID_MATCH		0x00444300
 #define SAMA5D33_EXID_MATCH		0x00414300