These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

11 files changed, 154 insertions, 2365 deletions

diff --git a/kernel/arch/arm/common/Kconfig b/kernel/arch/arm/common/Kconfig
index c3a4e9ceb..9353184d7 100644
--- a/kernel/arch/arm/common/Kconfig
+++ b/kernel/arch/arm/common/Kconfig
@@ -17,6 +17,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config TI_PRIV_EDMA
-	bool
diff --git a/kernel/arch/arm/common/Makefile b/kernel/arch/arm/common/Makefile
index 70b1eff47..27f23b15b 100644
--- a/kernel/arch/arm/common/Makefile
+++ b/kernel/arch/arm/common/Makefile
@@ -11,11 +11,9 @@ obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
 obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
 obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
-obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
 obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
 CFLAGS_REMOVE_mcpm_entry.o	= -pg
 AFLAGS_mcpm_head.o		:= -march=armv7-a
 AFLAGS_vlock.o			:= -march=armv7-a
-obj-$(CONFIG_TI_PRIV_EDMA)	+= edma.o
 obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
 obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/kernel/arch/arm/common/edma.c b/kernel/arch/arm/common/edma.c
deleted file mode 100644
index 5662a8726..000000000
--- a/kernel/arch/arm/common/edma.c
+++ /dev/null
@@ -1,1873 +0,0 @@
-/*
- * EDMA3 support for DaVinci
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/edma.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_dma.h>
-#include <linux/of_irq.h>
-#include <linux/pm_runtime.h>
-
-#include <linux/platform_data/edma.h>
-
-/* Offsets matching "struct edmacc_param" */
-#define PARM_OPT		0x00
-#define PARM_SRC		0x04
-#define PARM_A_B_CNT		0x08
-#define PARM_DST		0x0c
-#define PARM_SRC_DST_BIDX	0x10
-#define PARM_LINK_BCNTRLD	0x14
-#define PARM_SRC_DST_CIDX	0x18
-#define PARM_CCNT		0x1c
-
-#define PARM_SIZE		0x20
-
-/* Offsets for EDMA CC global channel registers and their shadows */
-#define SH_ER		0x00	/* 64 bits */
-#define SH_ECR		0x08	/* 64 bits */
-#define SH_ESR		0x10	/* 64 bits */
-#define SH_CER		0x18	/* 64 bits */
-#define SH_EER		0x20	/* 64 bits */
-#define SH_EECR		0x28	/* 64 bits */
-#define SH_EESR		0x30	/* 64 bits */
-#define SH_SER		0x38	/* 64 bits */
-#define SH_SECR		0x40	/* 64 bits */
-#define SH_IER		0x50	/* 64 bits */
-#define SH_IECR		0x58	/* 64 bits */
-#define SH_IESR		0x60	/* 64 bits */
-#define SH_IPR		0x68	/* 64 bits */
-#define SH_ICR		0x70	/* 64 bits */
-#define SH_IEVAL	0x78
-#define SH_QER		0x80
-#define SH_QEER		0x84
-#define SH_QEECR	0x88
-#define SH_QEESR	0x8c
-#define SH_QSER		0x90
-#define SH_QSECR	0x94
-#define SH_SIZE		0x200
-
-/* Offsets for EDMA CC global registers */
-#define EDMA_REV	0x0000
-#define EDMA_CCCFG	0x0004
-#define EDMA_QCHMAP	0x0200	/* 8 registers */
-#define EDMA_DMAQNUM	0x0240	/* 8 registers (4 on OMAP-L1xx) */
-#define EDMA_QDMAQNUM	0x0260
-#define EDMA_QUETCMAP	0x0280
-#define EDMA_QUEPRI	0x0284
-#define EDMA_EMR	0x0300	/* 64 bits */
-#define EDMA_EMCR	0x0308	/* 64 bits */
-#define EDMA_QEMR	0x0310
-#define EDMA_QEMCR	0x0314
-#define EDMA_CCERR	0x0318
-#define EDMA_CCERRCLR	0x031c
-#define EDMA_EEVAL	0x0320
-#define EDMA_DRAE	0x0340	/* 4 x 64 bits*/
-#define EDMA_QRAE	0x0380	/* 4 registers */
-#define EDMA_QUEEVTENTRY	0x0400	/* 2 x 16 registers */
-#define EDMA_QSTAT	0x0600	/* 2 registers */
-#define EDMA_QWMTHRA	0x0620
-#define EDMA_QWMTHRB	0x0624
-#define EDMA_CCSTAT	0x0640
-
-#define EDMA_M		0x1000	/* global channel registers */
-#define EDMA_ECR	0x1008
-#define EDMA_ECRH	0x100C
-#define EDMA_SHADOW0	0x2000	/* 4 regions shadowing global channels */
-#define EDMA_PARM	0x4000	/* 128 param entries */
-
-#define PARM_OFFSET(param_no)	(EDMA_PARM + ((param_no) << 5))
-
-#define EDMA_DCHMAP	0x0100  /* 64 registers */
-
-/* CCCFG register */
-#define GET_NUM_DMACH(x)	(x & 0x7) /* bits 0-2 */
-#define GET_NUM_PAENTRY(x)	((x & 0x7000) >> 12) /* bits 12-14 */
-#define GET_NUM_EVQUE(x)	((x & 0x70000) >> 16) /* bits 16-18 */
-#define GET_NUM_REGN(x)		((x & 0x300000) >> 20) /* bits 20-21 */
-#define CHMAP_EXIST		BIT(24)
-
-#define EDMA_MAX_DMACH           64
-#define EDMA_MAX_PARAMENTRY     512
-
-/*****************************************************************************/
-
-static void __iomem *edmacc_regs_base[EDMA_MAX_CC];
-
-static inline unsigned int edma_read(unsigned ctlr, int offset)
-{
-	return (unsigned int)__raw_readl(edmacc_regs_base[ctlr] + offset);
-}
-
-static inline void edma_write(unsigned ctlr, int offset, int val)
-{
-	__raw_writel(val, edmacc_regs_base[ctlr] + offset);
-}
-static inline void edma_modify(unsigned ctlr, int offset, unsigned and,
-		unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_and(unsigned ctlr, int offset, unsigned and)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val &= and;
-	edma_write(ctlr, offset, val);
-}
-static inline void edma_or(unsigned ctlr, int offset, unsigned or)
-{
-	unsigned val = edma_read(ctlr, offset);
-	val |= or;
-	edma_write(ctlr, offset, val);
-}
-static inline unsigned int edma_read_array(unsigned ctlr, int offset, int i)
-{
-	return edma_read(ctlr, offset + (i << 2));
-}
-static inline void edma_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, offset + (i << 2), val);
-}
-static inline void edma_modify_array(unsigned ctlr, int offset, int i,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, offset + (i << 2), and, or);
-}
-static inline void edma_or_array(unsigned ctlr, int offset, int i, unsigned or)
-{
-	edma_or(ctlr, offset + (i << 2), or);
-}
-static inline void edma_or_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned or)
-{
-	edma_or(ctlr, offset + ((i*2 + j) << 2), or);
-}
-static inline void edma_write_array2(unsigned ctlr, int offset, int i, int j,
-		unsigned val)
-{
-	edma_write(ctlr, offset + ((i*2 + j) << 2), val);
-}
-static inline unsigned int edma_shadow0_read(unsigned ctlr, int offset)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset);
-}
-static inline unsigned int edma_shadow0_read_array(unsigned ctlr, int offset,
-		int i)
-{
-	return edma_read(ctlr, EDMA_SHADOW0 + offset + (i << 2));
-}
-static inline void edma_shadow0_write(unsigned ctlr, int offset, unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset, val);
-}
-static inline void edma_shadow0_write_array(unsigned ctlr, int offset, int i,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_SHADOW0 + offset + (i << 2), val);
-}
-static inline unsigned int edma_parm_read(unsigned ctlr, int offset,
-		int param_no)
-{
-	return edma_read(ctlr, EDMA_PARM + offset + (param_no << 5));
-}
-static inline void edma_parm_write(unsigned ctlr, int offset, int param_no,
-		unsigned val)
-{
-	edma_write(ctlr, EDMA_PARM + offset + (param_no << 5), val);
-}
-static inline void edma_parm_modify(unsigned ctlr, int offset, int param_no,
-		unsigned and, unsigned or)
-{
-	edma_modify(ctlr, EDMA_PARM + offset + (param_no << 5), and, or);
-}
-static inline void edma_parm_and(unsigned ctlr, int offset, int param_no,
-		unsigned and)
-{
-	edma_and(ctlr, EDMA_PARM + offset + (param_no << 5), and);
-}
-static inline void edma_parm_or(unsigned ctlr, int offset, int param_no,
-		unsigned or)
-{
-	edma_or(ctlr, EDMA_PARM + offset + (param_no << 5), or);
-}
-
-static inline void set_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		set_bit(offset + (len - 1), p);
-}
-
-static inline void clear_bits(int offset, int len, unsigned long *p)
-{
-	for (; len > 0; len--)
-		clear_bit(offset + (len - 1), p);
-}
-
-/*****************************************************************************/
-
-/* actual number of DMA channels and slots on this silicon */
-struct edma {
-	/* how many dma resources of each type */
-	unsigned	num_channels;
-	unsigned	num_region;
-	unsigned	num_slots;
-	unsigned	num_tc;
-	enum dma_event_q 	default_queue;
-
-	/* list of channels with no even trigger; terminated by "-1" */
-	const s8	*noevent;
-
-	struct edma_soc_info *info;
-
-	/* The edma_inuse bit for each PaRAM slot is clear unless the
-	 * channel is in use ... by ARM or DSP, for QDMA, or whatever.
-	 */
-	DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
-
-	/* The edma_unused bit for each channel is clear unless
-	 * it is not being used on this platform. It uses a bit
-	 * of SOC-specific initialization code.
-	 */
-	DECLARE_BITMAP(edma_unused, EDMA_MAX_DMACH);
-
-	unsigned	irq_res_start;
-	unsigned	irq_res_end;
-
-	struct dma_interrupt_data {
-		void (*callback)(unsigned channel, unsigned short ch_status,
-				void *data);
-		void *data;
-	} intr_data[EDMA_MAX_DMACH];
-};
-
-static struct edma *edma_cc[EDMA_MAX_CC];
-static int arch_num_cc;
-
-/* dummy param set used to (re)initialize parameter RAM slots */
-static const struct edmacc_param dummy_paramset = {
-	.link_bcntrld = 0xffff,
-	.ccnt = 1,
-};
-
-static const struct of_device_id edma_of_ids[] = {
-	{ .compatible = "ti,edma3", },
-	{}
-};
-
-/*****************************************************************************/
-
-static void map_dmach_queue(unsigned ctlr, unsigned ch_no,
-		enum dma_event_q queue_no)
-{
-	int bit = (ch_no & 0x7) * 4;
-
-	/* default to low priority queue */
-	if (queue_no == EVENTQ_DEFAULT)
-		queue_no = edma_cc[ctlr]->default_queue;
-
-	queue_no &= 7;
-	edma_modify_array(ctlr, EDMA_DMAQNUM, (ch_no >> 3),
-			~(0x7 << bit), queue_no << bit);
-}
-
-static void assign_priority_to_queue(unsigned ctlr, int queue_no,
-		int priority)
-{
-	int bit = queue_no * 4;
-	edma_modify(ctlr, EDMA_QUEPRI, ~(0x7 << bit),
-			((priority & 0x7) << bit));
-}
-
-/**
- * map_dmach_param - Maps channel number to param entry number
- *
- * This maps the dma channel number to param entry numberter. In
- * other words using the DMA channel mapping registers a param entry
- * can be mapped to any channel
- *
- * Callers are responsible for ensuring the channel mapping logic is
- * included in that particular EDMA variant (Eg : dm646x)
- *
- */
-static void map_dmach_param(unsigned ctlr)
-{
-	int i;
-	for (i = 0; i < EDMA_MAX_DMACH; i++)
-		edma_write_array(ctlr, EDMA_DCHMAP , i , (i << 5));
-}
-
-static inline void
-setup_dma_interrupt(unsigned lch,
-	void (*callback)(unsigned channel, u16 ch_status, void *data),
-	void *data)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(lch);
-	lch = EDMA_CHAN_SLOT(lch);
-
-	if (!callback)
-		edma_shadow0_write_array(ctlr, SH_IECR, lch >> 5,
-				BIT(lch & 0x1f));
-
-	edma_cc[ctlr]->intr_data[lch].callback = callback;
-	edma_cc[ctlr]->intr_data[lch].data = data;
-
-	if (callback) {
-		edma_shadow0_write_array(ctlr, SH_ICR, lch >> 5,
-				BIT(lch & 0x1f));
-		edma_shadow0_write_array(ctlr, SH_IESR, lch >> 5,
-				BIT(lch & 0x1f));
-	}
-}
-
-static int irq2ctlr(int irq)
-{
-	if (irq >= edma_cc[0]->irq_res_start && irq <= edma_cc[0]->irq_res_end)
-		return 0;
-	else if (irq >= edma_cc[1]->irq_res_start &&
-		irq <= edma_cc[1]->irq_res_end)
-		return 1;
-
-	return -1;
-}
-
-/******************************************************************************
- *
- * DMA interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_irq_handler(int irq, void *data)
-{
-	int ctlr;
-	u32 sh_ier;
-	u32 sh_ipr;
-	u32 bank;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_irq_handler\n");
-
-	sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 0);
-	if (!sh_ipr) {
-		sh_ipr = edma_shadow0_read_array(ctlr, SH_IPR, 1);
-		if (!sh_ipr)
-			return IRQ_NONE;
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 1);
-		bank = 1;
-	} else {
-		sh_ier = edma_shadow0_read_array(ctlr, SH_IER, 0);
-		bank = 0;
-	}
-
-	do {
-		u32 slot;
-		u32 channel;
-
-		dev_dbg(data, "IPR%d %08x\n", bank, sh_ipr);
-
-		slot = __ffs(sh_ipr);
-		sh_ipr &= ~(BIT(slot));
-
-		if (sh_ier & BIT(slot)) {
-			channel = (bank << 5) | slot;
-			/* Clear the corresponding IPR bits */
-			edma_shadow0_write_array(ctlr, SH_ICR, bank,
-					BIT(slot));
-			if (edma_cc[ctlr]->intr_data[channel].callback)
-				edma_cc[ctlr]->intr_data[channel].callback(
-					channel, EDMA_DMA_COMPLETE,
-					edma_cc[ctlr]->intr_data[channel].data);
-		}
-	} while (sh_ipr);
-
-	edma_shadow0_write(ctlr, SH_IEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-/******************************************************************************
- *
- * DMA error interrupt handler
- *
- *****************************************************************************/
-static irqreturn_t dma_ccerr_handler(int irq, void *data)
-{
-	int i;
-	int ctlr;
-	unsigned int cnt = 0;
-
-	ctlr = irq2ctlr(irq);
-	if (ctlr < 0)
-		return IRQ_NONE;
-
-	dev_dbg(data, "dma_ccerr_handler\n");
-
-	if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-	    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-	    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-	    (edma_read(ctlr, EDMA_CCERR) == 0))
-		return IRQ_NONE;
-
-	while (1) {
-		int j = -1;
-		if (edma_read_array(ctlr, EDMA_EMR, 0))
-			j = 0;
-		else if (edma_read_array(ctlr, EDMA_EMR, 1))
-			j = 1;
-		if (j >= 0) {
-			dev_dbg(data, "EMR%d %08x\n", j,
-					edma_read_array(ctlr, EDMA_EMR, j));
-			for (i = 0; i < 32; i++) {
-				int k = (j << 5) + i;
-				if (edma_read_array(ctlr, EDMA_EMR, j) &
-							BIT(i)) {
-					/* Clear the corresponding EMR bits */
-					edma_write_array(ctlr, EDMA_EMCR, j,
-							BIT(i));
-					/* Clear any SER */
-					edma_shadow0_write_array(ctlr, SH_SECR,
-								j, BIT(i));
-					if (edma_cc[ctlr]->intr_data[k].
-								callback) {
-						edma_cc[ctlr]->intr_data[k].
-						callback(k,
-						EDMA_DMA_CC_ERROR,
-						edma_cc[ctlr]->intr_data
-						[k].data);
-					}
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_QEMR)) {
-			dev_dbg(data, "QEMR %02x\n",
-				edma_read(ctlr, EDMA_QEMR));
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_QEMR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_QEMCR, BIT(i));
-					edma_shadow0_write(ctlr, SH_QSECR,
-								BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		} else if (edma_read(ctlr, EDMA_CCERR)) {
-			dev_dbg(data, "CCERR %08x\n",
-				edma_read(ctlr, EDMA_CCERR));
-			/* FIXME:  CCERR.BIT(16) ignored!  much better
-			 * to just write CCERRCLR with CCERR value...
-			 */
-			for (i = 0; i < 8; i++) {
-				if (edma_read(ctlr, EDMA_CCERR) & BIT(i)) {
-					/* Clear the corresponding IPR bits */
-					edma_write(ctlr, EDMA_CCERRCLR, BIT(i));
-
-					/* NOTE:  not reported!! */
-				}
-			}
-		}
-		if ((edma_read_array(ctlr, EDMA_EMR, 0) == 0) &&
-		    (edma_read_array(ctlr, EDMA_EMR, 1) == 0) &&
-		    (edma_read(ctlr, EDMA_QEMR) == 0) &&
-		    (edma_read(ctlr, EDMA_CCERR) == 0))
-			break;
-		cnt++;
-		if (cnt > 10)
-			break;
-	}
-	edma_write(ctlr, EDMA_EEVAL, 1);
-	return IRQ_HANDLED;
-}
-
-static int reserve_contiguous_slots(int ctlr, unsigned int id,
-				     unsigned int num_slots,
-				     unsigned int start_slot)
-{
-	int i, j;
-	unsigned int count = num_slots;
-	int stop_slot = start_slot;
-	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
-
-	for (i = start_slot; i < edma_cc[ctlr]->num_slots; ++i) {
-		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_cc[ctlr]->edma_inuse)) {
-			/* Record our current beginning slot */
-			if (count == num_slots)
-				stop_slot = i;
-
-			count--;
-			set_bit(j, tmp_inuse);
-
-			if (count == 0)
-				break;
-		} else {
-			clear_bit(j, tmp_inuse);
-
-			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
-				stop_slot = i;
-				break;
-			} else {
-				count = num_slots;
-			}
-		}
-	}
-
-	/*
-	 * We have to clear any bits that we set
-	 * if we run out parameter RAM slots, i.e we do find a set
-	 * of contiguous parameter RAM slots but do not find the exact number
-	 * requested as we may reach the total number of parameter RAM slots
-	 */
-	if (i == edma_cc[ctlr]->num_slots)
-		stop_slot = i;
-
-	j = start_slot;
-	for_each_set_bit_from(j, tmp_inuse, stop_slot)
-		clear_bit(j, edma_cc[ctlr]->edma_inuse);
-
-	if (count)
-		return -EBUSY;
-
-	for (j = i - num_slots + 1; j <= i; ++j)
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
-}
-
-static int prepare_unused_channel_list(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int i, count, ctlr;
-	struct of_phandle_args  dma_spec;
-
-	if (dev->of_node) {
-		count = of_property_count_strings(dev->of_node, "dma-names");
-		if (count < 0)
-			return 0;
-		for (i = 0; i < count; i++) {
-			if (of_parse_phandle_with_args(dev->of_node, "dmas",
-						       "#dma-cells", i,
-						       &dma_spec))
-				continue;
-
-			if (!of_match_node(edma_of_ids, dma_spec.np)) {
-				of_node_put(dma_spec.np);
-				continue;
-			}
-
-			clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
-				  edma_cc[0]->edma_unused);
-			of_node_put(dma_spec.np);
-		}
-		return 0;
-	}
-
-	/* For non-OF case */
-	for (i = 0; i < pdev->num_resources; i++) {
-		if ((pdev->resource[i].flags & IORESOURCE_DMA) &&
-				(int)pdev->resource[i].start >= 0) {
-			ctlr = EDMA_CTLR(pdev->resource[i].start);
-			clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
-				  edma_cc[ctlr]->edma_unused);
-		}
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------*/
-
-static bool unused_chan_list_done;
-
-/* Resource alloc/free:  dma channels, parameter RAM slots */
-
-/**
- * edma_alloc_channel - allocate DMA channel and paired parameter RAM
- * @channel: specific channel to allocate; negative for "any unmapped channel"
- * @callback: optional; to be issued on DMA completion or errors
- * @data: passed to callback
- * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
- *	Controller (TC) executes requests using this channel.  Use
- *	EVENTQ_DEFAULT unless you really need a high priority queue.
- *
- * This allocates a DMA channel and its associated parameter RAM slot.
- * The parameter RAM is initialized to hold a dummy transfer.
- *
- * Normal use is to pass a specific channel number as @channel, to make
- * use of hardware events mapped to that channel.  When the channel will
- * be used only for software triggering or event chaining, channels not
- * mapped to hardware events (or mapped to unused events) are preferable.
- *
- * DMA transfers start from a channel using edma_start(), or by
- * chaining.  When the transfer described in that channel's parameter RAM
- * slot completes, that slot's data may be reloaded through a link.
- *
- * DMA errors are only reported to the @callback associated with the
- * channel driving that transfer, but transfer completion callbacks can
- * be sent to another channel under control of the TCC field in
- * the option word of the transfer's parameter RAM set.  Drivers must not
- * use DMA transfer completion callbacks for channels they did not allocate.
- * (The same applies to TCC codes used in transfer chaining.)
- *
- * Returns the number of the channel, else negative errno.
- */
-int edma_alloc_channel(int channel,
-		void (*callback)(unsigned channel, u16 ch_status, void *data),
-		void *data,
-		enum dma_event_q eventq_no)
-{
-	unsigned i, done = 0, ctlr = 0;
-	int ret = 0;
-
-	if (!unused_chan_list_done) {
-		/*
-		 * Scan all the platform devices to find out the EDMA channels
-		 * used and clear them in the unused list, making the rest
-		 * available for ARM usage.
-		 */
-		ret = bus_for_each_dev(&platform_bus_type, NULL, NULL,
-				prepare_unused_channel_list);
-		if (ret < 0)
-			return ret;
-
-		unused_chan_list_done = true;
-	}
-
-	if (channel >= 0) {
-		ctlr = EDMA_CTLR(channel);
-		channel = EDMA_CHAN_SLOT(channel);
-	}
-
-	if (channel < 0) {
-		for (i = 0; i < arch_num_cc; i++) {
-			channel = 0;
-			for (;;) {
-				channel = find_next_bit(edma_cc[i]->edma_unused,
-						edma_cc[i]->num_channels,
-						channel);
-				if (channel == edma_cc[i]->num_channels)
-					break;
-				if (!test_and_set_bit(channel,
-						edma_cc[i]->edma_inuse)) {
-					done = 1;
-					ctlr = i;
-					break;
-				}
-				channel++;
-			}
-			if (done)
-				break;
-		}
-		if (!done)
-			return -ENOMEM;
-	} else if (channel >= edma_cc[ctlr]->num_channels) {
-		return -EINVAL;
-	} else if (test_and_set_bit(channel, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	/* ensure access through shadow region 0 */
-	edma_or_array2(ctlr, EDMA_DRAE, 0, channel >> 5, BIT(channel & 0x1f));
-
-	/* ensure no events are pending */
-	edma_stop(EDMA_CTLR_CHAN(ctlr, channel));
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-
-	if (callback)
-		setup_dma_interrupt(EDMA_CTLR_CHAN(ctlr, channel),
-					callback, data);
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-
-	return EDMA_CTLR_CHAN(ctlr, channel);
-}
-EXPORT_SYMBOL(edma_alloc_channel);
-
-
-/**
- * edma_free_channel - deallocate DMA channel
- * @channel: dma channel returned from edma_alloc_channel()
- *
- * This deallocates the DMA channel and associated parameter RAM slot
- * allocated by edma_alloc_channel().
- *
- * Callers are responsible for ensuring the channel is inactive, and
- * will not be reactivated by linking, chaining, or software calls to
- * edma_start().
- */
-void edma_free_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	setup_dma_interrupt(channel, NULL, NULL);
-	/* REVISIT should probably take out of shadow region 0 */
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(channel),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(channel, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_channel);
-
-/**
- * edma_alloc_slot - allocate DMA parameter RAM
- * @slot: specific slot to allocate; negative for "any unused slot"
- *
- * This allocates a parameter RAM slot, initializing it to hold a
- * dummy transfer.  Slots allocated using this routine have not been
- * mapped to a hardware DMA channel, and will normally be used by
- * linking to them from a slot associated with a DMA channel.
- *
- * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
- * slots may be allocated on behalf of DSP firmware.
- *
- * Returns the number of the slot, else negative errno.
- */
-int edma_alloc_slot(unsigned ctlr, int slot)
-{
-	if (!edma_cc[ctlr])
-		return -EINVAL;
-
-	if (slot >= 0)
-		slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < 0) {
-		slot = edma_cc[ctlr]->num_channels;
-		for (;;) {
-			slot = find_next_zero_bit(edma_cc[ctlr]->edma_inuse,
-					edma_cc[ctlr]->num_slots, slot);
-			if (slot == edma_cc[ctlr]->num_slots)
-				return -ENOMEM;
-			if (!test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse))
-				break;
-		}
-	} else if (slot < edma_cc[ctlr]->num_channels ||
-			slot >= edma_cc[ctlr]->num_slots) {
-		return -EINVAL;
-	} else if (test_and_set_bit(slot, edma_cc[ctlr]->edma_inuse)) {
-		return -EBUSY;
-	}
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-
-	return EDMA_CTLR_CHAN(ctlr, slot);
-}
-EXPORT_SYMBOL(edma_alloc_slot);
-
-/**
- * edma_free_slot - deallocate DMA parameter RAM
- * @slot: parameter RAM slot returned from edma_alloc_slot()
- *
- * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
- * Callers are responsible for ensuring the slot is inactive, and will
- * not be activated.
- */
-void edma_free_slot(unsigned slot)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots)
-		return;
-
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			&dummy_paramset, PARM_SIZE);
-	clear_bit(slot, edma_cc[ctlr]->edma_inuse);
-}
-EXPORT_SYMBOL(edma_free_slot);
-
-
-/**
- * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
- * The API will return the starting point of a set of
- * contiguous parameter RAM slots that have been requested
- *
- * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
- * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM slots
- * @slot  - the start value of Parameter RAM slot that should be passed if id
- * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- *
- * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAM slots from parameter RAM 64 in the case of
- * DaVinci SOCs and 32 in the case of DA8xx SOCs.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAM slots from the "slot" that is passed as an
- * argument to the API.
- *
- * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "slot"
- * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAM slots from the remaining Parameter
- * RAM slots
- */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
-{
-	/*
-	 * The start slot requested should be greater than
-	 * the number of channels and lesser than the total number
-	 * of slots
-	 */
-	if ((id != EDMA_CONT_PARAMS_ANY) &&
-		(slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots))
-		return -EINVAL;
-
-	/*
-	 * The number of parameter RAM slots requested cannot be less than 1
-	 * and cannot be more than the number of slots minus the number of
-	 * channels
-	 */
-	if (count < 1 || count >
-		(edma_cc[ctlr]->num_slots - edma_cc[ctlr]->num_channels))
-		return -EINVAL;
-
-	switch (id) {
-	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_slots(ctlr, id, count,
-						 edma_cc[ctlr]->num_channels);
-	case EDMA_CONT_PARAMS_FIXED_EXACT:
-	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_slots(ctlr, id, count, slot);
-	default:
-		return -EINVAL;
-	}
-
-}
-EXPORT_SYMBOL(edma_alloc_cont_slots);
-
-/**
- * edma_free_cont_slots - deallocate DMA parameter RAM slots
- * @slot: first parameter RAM of a set of parameter RAM slots to be freed
- * @count: the number of contiguous parameter RAM slots to be freed
- *
- * This deallocates the parameter RAM slots allocated by
- * edma_alloc_cont_slots.
- * Callers/applications need to keep track of sets of contiguous
- * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
- * API.
- * Callers are responsible for ensuring the slots are inactive, and will
- * not be activated.
- */
-int edma_free_cont_slots(unsigned slot, int count)
-{
-	unsigned ctlr, slot_to_free;
-	int i;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_channels ||
-		slot >= edma_cc[ctlr]->num_slots ||
-		count < 1)
-		return -EINVAL;
-
-	for (i = slot; i < slot + count; ++i) {
-		ctlr = EDMA_CTLR(i);
-		slot_to_free = EDMA_CHAN_SLOT(i);
-
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
-			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot_to_free, edma_cc[ctlr]->edma_inuse);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(edma_free_cont_slots);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (i) -- read/write partial slots */
-
-/**
- * edma_set_src - set initial DMA source address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @src_port: physical address of source (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the source address is modified during the DMA transfer
- * according to edma_set_src_index().
- */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
-				enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set SAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
-		} else {
-			/* clear SAM */
-			i &= ~SAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-
-		/* set the source port address
-		   in source register of param structure */
-		edma_parm_write(ctlr, PARM_SRC, slot, src_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_src);
-
-/**
- * edma_set_dest - set initial DMA destination address in parameter RAM slot
- * @slot: parameter RAM slot being configured
- * @dest_port: physical address of destination (memory, controller FIFO, etc)
- * @addressMode: INCR, except in very rare cases
- * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
- *	width to use when addressing the fifo (e.g. W8BIT, W32BIT)
- *
- * Note that the destination address is modified during the DMA transfer
- * according to edma_set_dest_index().
- */
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
-				 enum address_mode mode, enum fifo_width width)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		unsigned int i = edma_parm_read(ctlr, PARM_OPT, slot);
-
-		if (mode) {
-			/* set DAM and program FWID */
-			i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
-		} else {
-			/* clear DAM */
-			i &= ~DAM;
-		}
-		edma_parm_write(ctlr, PARM_OPT, slot, i);
-		/* set the destination port address
-		   in dest register of param structure */
-		edma_parm_write(ctlr, PARM_DST, slot, dest_port);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest);
-
-/**
- * edma_get_position - returns the current transfer point
- * @slot: parameter RAM slot being examined
- * @dst:  true selects the dest position, false the source
- *
- * Returns the position of the current active slot
- */
-dma_addr_t edma_get_position(unsigned slot, bool dst)
-{
-	u32 offs, ctlr = EDMA_CTLR(slot);
-
-	slot = EDMA_CHAN_SLOT(slot);
-
-	offs = PARM_OFFSET(slot);
-	offs += dst ? PARM_DST : PARM_SRC;
-
-	return edma_read(ctlr, offs);
-}
-
-/**
- * edma_set_src_index - configure DMA source address indexing
- * @slot: parameter RAM slot being configured
- * @src_bidx: byte offset between source arrays in a frame
- * @src_cidx: byte offset between source frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0xffff0000, src_bidx);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0xffff0000, src_cidx);
-	}
-}
-EXPORT_SYMBOL(edma_set_src_index);
-
-/**
- * edma_set_dest_index - configure DMA destination address indexing
- * @slot: parameter RAM slot being configured
- * @dest_bidx: byte offset between destination arrays in a frame
- * @dest_cidx: byte offset between destination frames in a block
- *
- * Offsets are specified to support either contiguous or discontiguous
- * memory transfers, or repeated access to a hardware register, as needed.
- * When accessing hardware registers, both offsets are normally zero.
- */
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_SRC_DST_BIDX, slot,
-				0x0000ffff, dest_bidx << 16);
-		edma_parm_modify(ctlr, PARM_SRC_DST_CIDX, slot,
-				0x0000ffff, dest_cidx << 16);
-	}
-}
-EXPORT_SYMBOL(edma_set_dest_index);
-
-/**
- * edma_set_transfer_params - configure DMA transfer parameters
- * @slot: parameter RAM slot being configured
- * @acnt: how many bytes per array (at least one)
- * @bcnt: how many arrays per frame (at least one)
- * @ccnt: how many frames per block (at least one)
- * @bcnt_rld: used only for A-Synchronized transfers; this specifies
- *	the value to reload into bcnt when it decrements to zero
- * @sync_mode: ASYNC or ABSYNC
- *
- * See the EDMA3 documentation to understand how to configure and link
- * transfers using the fields in PaRAM slots.  If you are not doing it
- * all at once with edma_write_slot(), you will use this routine
- * plus two calls each for source and destination, setting the initial
- * address and saying how to index that address.
- *
- * An example of an A-Synchronized transfer is a serial link using a
- * single word shift register.  In that case, @acnt would be equal to
- * that word size; the serial controller issues a DMA synchronization
- * event to transfer each word, and memory access by the DMA transfer
- * controller will be word-at-a-time.
- *
- * An example of an AB-Synchronized transfer is a device using a FIFO.
- * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
- * The controller with the FIFO issues DMA synchronization events when
- * the FIFO threshold is reached, and the DMA transfer controller will
- * transfer one frame to (or from) the FIFO.  It will probably use
- * efficient burst modes to access memory.
- */
-void edma_set_transfer_params(unsigned slot,
-		u16 acnt, u16 bcnt, u16 ccnt,
-		u16 bcnt_rld, enum sync_dimension sync_mode)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot < edma_cc[ctlr]->num_slots) {
-		edma_parm_modify(ctlr, PARM_LINK_BCNTRLD, slot,
-				0x0000ffff, bcnt_rld << 16);
-		if (sync_mode == ASYNC)
-			edma_parm_and(ctlr, PARM_OPT, slot, ~SYNCDIM);
-		else
-			edma_parm_or(ctlr, PARM_OPT, slot, SYNCDIM);
-		/* Set the acount, bcount, ccount registers */
-		edma_parm_write(ctlr, PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
-		edma_parm_write(ctlr, PARM_CCNT, slot, ccnt);
-	}
-}
-EXPORT_SYMBOL(edma_set_transfer_params);
-
-/**
- * edma_link - link one parameter RAM slot to another
- * @from: parameter RAM slot originating the link
- * @to: parameter RAM slot which is the link target
- *
- * The originating slot should not be part of any active DMA transfer.
- */
-void edma_link(unsigned from, unsigned to)
-{
-	unsigned ctlr_from, ctlr_to;
-
-	ctlr_from = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-	ctlr_to = EDMA_CTLR(to);
-	to = EDMA_CHAN_SLOT(to);
-
-	if (from >= edma_cc[ctlr_from]->num_slots)
-		return;
-	if (to >= edma_cc[ctlr_to]->num_slots)
-		return;
-	edma_parm_modify(ctlr_from, PARM_LINK_BCNTRLD, from, 0xffff0000,
-				PARM_OFFSET(to));
-}
-EXPORT_SYMBOL(edma_link);
-
-/**
- * edma_unlink - cut link from one parameter RAM slot
- * @from: parameter RAM slot originating the link
- *
- * The originating slot should not be part of any active DMA transfer.
- * Its link is set to 0xffff.
- */
-void edma_unlink(unsigned from)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(from);
-	from = EDMA_CHAN_SLOT(from);
-
-	if (from >= edma_cc[ctlr]->num_slots)
-		return;
-	edma_parm_or(ctlr, PARM_LINK_BCNTRLD, from, 0xffff);
-}
-EXPORT_SYMBOL(edma_unlink);
-
-/*-----------------------------------------------------------------------*/
-
-/* Parameter RAM operations (ii) -- read/write whole parameter sets */
-
-/**
- * edma_write_slot - write parameter RAM data for slot
- * @slot: number of parameter RAM slot being modified
- * @param: data to be written into parameter RAM slot
- *
- * Use this to assign all parameters of a transfer at once.  This
- * allows more efficient setup of transfers than issuing multiple
- * calls to set up those parameters in small pieces, and provides
- * complete control over all transfer options.
- */
-void edma_write_slot(unsigned slot, const struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot), param,
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_write_slot);
-
-/**
- * edma_read_slot - read parameter RAM data from slot
- * @slot: number of parameter RAM slot being copied
- * @param: where to store copy of parameter RAM data
- *
- * Use this to read data from a parameter RAM slot, perhaps to
- * save them as a template for later reuse.
- */
-void edma_read_slot(unsigned slot, struct edmacc_param *param)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(slot);
-	slot = EDMA_CHAN_SLOT(slot);
-
-	if (slot >= edma_cc[ctlr]->num_slots)
-		return;
-	memcpy_fromio(param, edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
-			PARM_SIZE);
-}
-EXPORT_SYMBOL(edma_read_slot);
-
-/*-----------------------------------------------------------------------*/
-
-/* Various EDMA channel control operations */
-
-/**
- * edma_pause - pause dma on a channel
- * @channel: on which edma_start() has been called
- *
- * This temporarily disables EDMA hardware events on the specified channel,
- * preventing them from triggering new transfers on its behalf
- */
-void edma_pause(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_pause);
-
-/**
- * edma_resume - resumes dma on a paused channel
- * @channel: on which edma_pause() has been called
- *
- * This re-enables EDMA hardware events on the specified channel.
- */
-void edma_resume(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EESR, channel >> 5, mask);
-	}
-}
-EXPORT_SYMBOL(edma_resume);
-
-int edma_trigger_channel(unsigned channel)
-{
-	unsigned ctlr;
-	unsigned int mask;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-	mask = BIT(channel & 0x1f);
-
-	edma_shadow0_write_array(ctlr, SH_ESR, (channel >> 5), mask);
-
-	pr_debug("EDMA: ESR%d %08x\n", (channel >> 5),
-		 edma_shadow0_read_array(ctlr, SH_ESR, (channel >> 5)));
-	return 0;
-}
-EXPORT_SYMBOL(edma_trigger_channel);
-
-/**
- * edma_start - start dma on a channel
- * @channel: channel being activated
- *
- * Channels with event associations will be triggered by their hardware
- * events, and channels without such associations will be triggered by
- * software.  (At this writing there is no interface for using software
- * triggers except with channels that don't support hardware triggers.)
- *
- * Returns zero on success, else negative errno.
- */
-int edma_start(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		/* EDMA channels without event association */
-		if (test_bit(channel, edma_cc[ctlr]->edma_unused)) {
-			pr_debug("EDMA: ESR%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_ESR, j));
-			edma_shadow0_write_array(ctlr, SH_ESR, j, mask);
-			return 0;
-		}
-
-		/* EDMA channel with event association */
-		pr_debug("EDMA: ER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_ER, j));
-		/* Clear any pending event or error */
-		edma_write_array(ctlr, EDMA_ECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_EESR, j, mask);
-		pr_debug("EDMA: EER%d %08x\n", j,
-			edma_shadow0_read_array(ctlr, SH_EER, j));
-		return 0;
-	}
-
-	return -EINVAL;
-}
-EXPORT_SYMBOL(edma_start);
-
-/**
- * edma_stop - stops dma on the channel passed
- * @channel: channel being deactivated
- *
- * When @lch is a channel, any active transfer is paused and
- * all pending hardware events are cleared.  The current transfer
- * may not be resumed, and the channel's Parameter RAM should be
- * reinitialized before being reused.
- */
-void edma_stop(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = channel >> 5;
-		unsigned int mask = BIT(channel & 0x1f);
-
-		edma_shadow0_write_array(ctlr, SH_EECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-
-		pr_debug("EDMA: EER%d %08x\n", j,
-				edma_shadow0_read_array(ctlr, SH_EER, j));
-
-		/* REVISIT:  consider guarding against inappropriate event
-		 * chaining by overwriting with dummy_paramset.
-		 */
-	}
-}
-EXPORT_SYMBOL(edma_stop);
-
-/******************************************************************************
- *
- * It cleans ParamEntry qand bring back EDMA to initial state if media has
- * been removed before EDMA has finished.It is usedful for removable media.
- * Arguments:
- *      ch_no     - channel no
- *
- * Return: zero on success, or corresponding error no on failure
- *
- * FIXME this should not be needed ... edma_stop() should suffice.
- *
- *****************************************************************************/
-
-void edma_clean_channel(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel < edma_cc[ctlr]->num_channels) {
-		int j = (channel >> 5);
-		unsigned int mask = BIT(channel & 0x1f);
-
-		pr_debug("EDMA: EMR%d %08x\n", j,
-				edma_read_array(ctlr, EDMA_EMR, j));
-		edma_shadow0_write_array(ctlr, SH_ECR, j, mask);
-		/* Clear the corresponding EMR bits */
-		edma_write_array(ctlr, EDMA_EMCR, j, mask);
-		/* Clear any SER */
-		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
-		edma_write(ctlr, EDMA_CCERRCLR, BIT(16) | BIT(1) | BIT(0));
-	}
-}
-EXPORT_SYMBOL(edma_clean_channel);
-
-/*
- * edma_clear_event - clear an outstanding event on the DMA channel
- * Arguments:
- *	channel - channel number
- */
-void edma_clear_event(unsigned channel)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-	if (channel < 32)
-		edma_write(ctlr, EDMA_ECR, BIT(channel));
-	else
-		edma_write(ctlr, EDMA_ECRH, BIT(channel - 32));
-}
-EXPORT_SYMBOL(edma_clear_event);
-
-/*
- * edma_assign_channel_eventq - move given channel to desired eventq
- * Arguments:
- *	channel - channel number
- *	eventq_no - queue to move the channel
- *
- * Can be used to move a channel to a selected event queue.
- */
-void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no)
-{
-	unsigned ctlr;
-
-	ctlr = EDMA_CTLR(channel);
-	channel = EDMA_CHAN_SLOT(channel);
-
-	if (channel >= edma_cc[ctlr]->num_channels)
-		return;
-
-	/* default to low priority queue */
-	if (eventq_no == EVENTQ_DEFAULT)
-		eventq_no = edma_cc[ctlr]->default_queue;
-	if (eventq_no >= edma_cc[ctlr]->num_tc)
-		return;
-
-	map_dmach_queue(ctlr, channel, eventq_no);
-}
-EXPORT_SYMBOL(edma_assign_channel_eventq);
-
-static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
-			      struct edma *edma_cc, int cc_id)
-{
-	int i;
-	u32 value, cccfg;
-	s8 (*queue_priority_map)[2];
-
-	/* Decode the eDMA3 configuration from CCCFG register */
-	cccfg = edma_read(cc_id, EDMA_CCCFG);
-
-	value = GET_NUM_REGN(cccfg);
-	edma_cc->num_region = BIT(value);
-
-	value = GET_NUM_DMACH(cccfg);
-	edma_cc->num_channels = BIT(value + 1);
-
-	value = GET_NUM_PAENTRY(cccfg);
-	edma_cc->num_slots = BIT(value + 4);
-
-	value = GET_NUM_EVQUE(cccfg);
-	edma_cc->num_tc = value + 1;
-
-	dev_dbg(dev, "eDMA3 CC%d HW configuration (cccfg: 0x%08x):\n", cc_id,
-		cccfg);
-	dev_dbg(dev, "num_region: %u\n", edma_cc->num_region);
-	dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels);
-	dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots);
-	dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc);
-
-	/* Nothing need to be done if queue priority is provided */
-	if (pdata->queue_priority_mapping)
-		return 0;
-
-	/*
-	 * Configure TC/queue priority as follows:
-	 * Q0 - priority 0
-	 * Q1 - priority 1
-	 * Q2 - priority 2
-	 * ...
-	 * The meaning of priority numbers: 0 highest priority, 7 lowest
-	 * priority. So Q0 is the highest priority queue and the last queue has
-	 * the lowest priority.
-	 */
-	queue_priority_map = devm_kzalloc(dev,
-					  (edma_cc->num_tc + 1) * sizeof(s8),
-					  GFP_KERNEL);
-	if (!queue_priority_map)
-		return -ENOMEM;
-
-	for (i = 0; i < edma_cc->num_tc; i++) {
-		queue_priority_map[i][0] = i;
-		queue_priority_map[i][1] = i;
-	}
-	queue_priority_map[i][0] = -1;
-	queue_priority_map[i][1] = -1;
-
-	pdata->queue_priority_mapping = queue_priority_map;
-	/* Default queue has the lowest priority */
-	pdata->default_queue = i - 1;
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES)
-
-static int edma_xbar_event_map(struct device *dev, struct device_node *node,
-			       struct edma_soc_info *pdata, size_t sz)
-{
-	const char pname[] = "ti,edma-xbar-event-map";
-	struct resource res;
-	void __iomem *xbar;
-	s16 (*xbar_chans)[2];
-	size_t nelm = sz / sizeof(s16);
-	u32 shift, offset, mux;
-	int ret, i;
-
-	xbar_chans = devm_kzalloc(dev, (nelm + 2) * sizeof(s16), GFP_KERNEL);
-	if (!xbar_chans)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(node, 1, &res);
-	if (ret)
-		return -ENOMEM;
-
-	xbar = devm_ioremap(dev, res.start, resource_size(&res));
-	if (!xbar)
-		return -ENOMEM;
-
-	ret = of_property_read_u16_array(node, pname, (u16 *)xbar_chans, nelm);
-	if (ret)
-		return -EIO;
-
-	/* Invalidate last entry for the other user of this mess */
-	nelm >>= 1;
-	xbar_chans[nelm][0] = xbar_chans[nelm][1] = -1;
-
-	for (i = 0; i < nelm; i++) {
-		shift = (xbar_chans[i][1] & 0x03) << 3;
-		offset = xbar_chans[i][1] & 0xfffffffc;
-		mux = readl(xbar + offset);
-		mux &= ~(0xff << shift);
-		mux |= xbar_chans[i][0] << shift;
-		writel(mux, (xbar + offset));
-	}
-
-	pdata->xbar_chans = (const s16 (*)[2]) xbar_chans;
-	return 0;
-}
-
-static int edma_of_parse_dt(struct device *dev,
-			    struct device_node *node,
-			    struct edma_soc_info *pdata)
-{
-	int ret = 0;
-	struct property *prop;
-	size_t sz;
-	struct edma_rsv_info *rsv_info;
-
-	rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
-	if (!rsv_info)
-		return -ENOMEM;
-	pdata->rsv = rsv_info;
-
-	prop = of_find_property(node, "ti,edma-xbar-event-map", &sz);
-	if (prop)
-		ret = edma_xbar_event_map(dev, node, pdata, sz);
-
-	return ret;
-}
-
-static struct of_dma_filter_info edma_filter_info = {
-	.filter_fn = edma_filter_fn,
-};
-
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	struct edma_soc_info *info;
-	int ret;
-
-	info = devm_kzalloc(dev, sizeof(struct edma_soc_info), GFP_KERNEL);
-	if (!info)
-		return ERR_PTR(-ENOMEM);
-
-	ret = edma_of_parse_dt(dev, node, info);
-	if (ret)
-		return ERR_PTR(ret);
-
-	dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
-	dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap);
-	of_dma_controller_register(dev->of_node, of_dma_simple_xlate,
-				   &edma_filter_info);
-
-	return info;
-}
-#else
-static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
-						      struct device_node *node)
-{
-	return ERR_PTR(-ENOSYS);
-}
-#endif
-
-static int edma_probe(struct platform_device *pdev)
-{
-	struct edma_soc_info	**info = pdev->dev.platform_data;
-	struct edma_soc_info    *ninfo[EDMA_MAX_CC] = {NULL};
-	s8		(*queue_priority_mapping)[2];
-	int			i, j, off, ln, found = 0;
-	int			status = -1;
-	const s16		(*rsv_chans)[2];
-	const s16		(*rsv_slots)[2];
-	const s16		(*xbar_chans)[2];
-	int			irq[EDMA_MAX_CC] = {0, 0};
-	int			err_irq[EDMA_MAX_CC] = {0, 0};
-	struct resource		*r[EDMA_MAX_CC] = {NULL};
-	struct resource		res[EDMA_MAX_CC];
-	char			res_name[10];
-	struct device_node	*node = pdev->dev.of_node;
-	struct device		*dev = &pdev->dev;
-	int			ret;
-	struct platform_device_info edma_dev_info = {
-		.name = "edma-dma-engine",
-		.dma_mask = DMA_BIT_MASK(32),
-		.parent = &pdev->dev,
-	};
-
-	if (node) {
-		/* Check if this is a second instance registered */
-		if (arch_num_cc) {
-			dev_err(dev, "only one EDMA instance is supported via DT\n");
-			return -ENODEV;
-		}
-
-		ninfo[0] = edma_setup_info_from_dt(dev, node);
-		if (IS_ERR(ninfo[0])) {
-			dev_err(dev, "failed to get DT data\n");
-			return PTR_ERR(ninfo[0]);
-		}
-
-		info = ninfo;
-	}
-
-	if (!info)
-		return -ENODEV;
-
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
-	for (j = 0; j < EDMA_MAX_CC; j++) {
-		if (!info[j]) {
-			if (!found)
-				return -ENODEV;
-			break;
-		}
-		if (node) {
-			ret = of_address_to_resource(node, j, &res[j]);
-			if (!ret)
-				r[j] = &res[j];
-		} else {
-			sprintf(res_name, "edma_cc%d", j);
-			r[j] = platform_get_resource_byname(pdev,
-						IORESOURCE_MEM,
-						res_name);
-		}
-		if (!r[j]) {
-			if (found)
-				break;
-			else
-				return -ENODEV;
-		} else {
-			found = 1;
-		}
-
-		edmacc_regs_base[j] = devm_ioremap_resource(&pdev->dev, r[j]);
-		if (IS_ERR(edmacc_regs_base[j]))
-			return PTR_ERR(edmacc_regs_base[j]);
-
-		edma_cc[j] = devm_kzalloc(&pdev->dev, sizeof(struct edma),
-					  GFP_KERNEL);
-		if (!edma_cc[j])
-			return -ENOMEM;
-
-		/* Get eDMA3 configuration from IP */
-		ret = edma_setup_from_hw(dev, info[j], edma_cc[j], j);
-		if (ret)
-			return ret;
-
-		edma_cc[j]->default_queue = info[j]->default_queue;
-
-		dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n",
-			edmacc_regs_base[j]);
-
-		for (i = 0; i < edma_cc[j]->num_slots; i++)
-			memcpy_toio(edmacc_regs_base[j] + PARM_OFFSET(i),
-					&dummy_paramset, PARM_SIZE);
-
-		/* Mark all channels as unused */
-		memset(edma_cc[j]->edma_unused, 0xff,
-			sizeof(edma_cc[j]->edma_unused));
-
-		if (info[j]->rsv) {
-
-			/* Clear the reserved channels in unused list */
-			rsv_chans = info[j]->rsv->rsv_chans;
-			if (rsv_chans) {
-				for (i = 0; rsv_chans[i][0] != -1; i++) {
-					off = rsv_chans[i][0];
-					ln = rsv_chans[i][1];
-					clear_bits(off, ln,
-						  edma_cc[j]->edma_unused);
-				}
-			}
-
-			/* Set the reserved slots in inuse list */
-			rsv_slots = info[j]->rsv->rsv_slots;
-			if (rsv_slots) {
-				for (i = 0; rsv_slots[i][0] != -1; i++) {
-					off = rsv_slots[i][0];
-					ln = rsv_slots[i][1];
-					set_bits(off, ln,
-						edma_cc[j]->edma_inuse);
-				}
-			}
-		}
-
-		/* Clear the xbar mapped channels in unused list */
-		xbar_chans = info[j]->xbar_chans;
-		if (xbar_chans) {
-			for (i = 0; xbar_chans[i][1] != -1; i++) {
-				off = xbar_chans[i][1];
-				clear_bits(off, 1,
-					   edma_cc[j]->edma_unused);
-			}
-		}
-
-		if (node) {
-			irq[j] = irq_of_parse_and_map(node, 0);
-			err_irq[j] = irq_of_parse_and_map(node, 2);
-		} else {
-			char irq_name[10];
-
-			sprintf(irq_name, "edma%d", j);
-			irq[j] = platform_get_irq_byname(pdev, irq_name);
-
-			sprintf(irq_name, "edma%d_err", j);
-			err_irq[j] = platform_get_irq_byname(pdev, irq_name);
-		}
-		edma_cc[j]->irq_res_start = irq[j];
-		edma_cc[j]->irq_res_end = err_irq[j];
-
-		status = devm_request_irq(dev, irq[j], dma_irq_handler, 0,
-					  "edma", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				irq[j], status);
-			return status;
-		}
-
-		status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0,
-					  "edma_error", dev);
-		if (status < 0) {
-			dev_dbg(&pdev->dev,
-				"devm_request_irq %d failed --> %d\n",
-				err_irq[j], status);
-			return status;
-		}
-
-		for (i = 0; i < edma_cc[j]->num_channels; i++)
-			map_dmach_queue(j, i, info[j]->default_queue);
-
-		queue_priority_mapping = info[j]->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						queue_priority_mapping[i][0],
-						queue_priority_mapping[i][1]);
-
-		/* Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < edma_cc[j]->num_region; i++) {
-			edma_write_array2(j, EDMA_DRAE, i, 0, 0x0);
-			edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
-			edma_write_array(j, EDMA_QRAE, i, 0x0);
-		}
-		edma_cc[j]->info = info[j];
-		arch_num_cc++;
-
-		edma_dev_info.id = j;
-		platform_device_register_full(&edma_dev_info);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int edma_pm_resume(struct device *dev)
-{
-	int i, j;
-
-	for (j = 0; j < arch_num_cc; j++) {
-		struct edma *cc = edma_cc[j];
-
-		s8 (*queue_priority_mapping)[2];
-
-		queue_priority_mapping = cc->info->queue_priority_mapping;
-
-		/* Event queue priority mapping */
-		for (i = 0; queue_priority_mapping[i][0] != -1; i++)
-			assign_priority_to_queue(j,
-						 queue_priority_mapping[i][0],
-						 queue_priority_mapping[i][1]);
-
-		/*
-		 * Map the channel to param entry if channel mapping logic
-		 * exist
-		 */
-		if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
-			map_dmach_param(j);
-
-		for (i = 0; i < cc->num_channels; i++) {
-			if (test_bit(i, cc->edma_inuse)) {
-				/* ensure access through shadow region 0 */
-				edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
-					       BIT(i & 0x1f));
-
-				setup_dma_interrupt(i,
-						    cc->intr_data[i].callback,
-						    cc->intr_data[i].data);
-			}
-		}
-	}
-
-	return 0;
-}
-#endif
-
-static const struct dev_pm_ops edma_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
-};
-
-static struct platform_driver edma_driver = {
-	.driver = {
-		.name	= "edma",
-		.pm	= &edma_pm_ops,
-		.of_match_table = edma_of_ids,
-	},
-	.probe = edma_probe,
-};
-
-static int __init edma_init(void)
-{
-	return platform_driver_probe(&edma_driver, edma_probe);
-}
-arch_initcall(edma_init);
-
diff --git a/kernel/arch/arm/common/icst.c b/kernel/arch/arm/common/icst.c
index 2dc6da70a..d7ed25270 100644
--- a/kernel/arch/arm/common/icst.c
+++ b/kernel/arch/arm/common/icst.c
@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);
@@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)
diff --git a/kernel/arch/arm/common/it8152.c b/kernel/arch/arm/common/it8152.c
index 5114b68e9..996aed3b4 100644
--- a/kernel/arch/arm/common/it8152.c
+++ b/kernel/arch/arm/common/it8152.c
@@ -91,11 +91,11 @@ void it8152_init_irq(void)
 	for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) {
 		irq_set_chip_and_handler(irq, &it8152_irq_chip,
 					 handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
 
-void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+void it8152_irq_demux(struct irq_desc *desc)
 {
        int bits_pd, bits_lp, bits_ld;
        int i;
diff --git a/kernel/arch/arm/common/locomo.c b/kernel/arch/arm/common/locomo.c
index b55c3625d..0e97b4b87 100644
--- a/kernel/arch/arm/common/locomo.c
+++ b/kernel/arch/arm/common/locomo.c
@@ -138,9 +138,9 @@ static struct locomo_dev_info locomo_devices[] = {
 	},
 };
 
-static void locomo_handler(unsigned int irq, struct irq_desc *desc)
+static void locomo_handler(struct irq_desc *desc)
 {
-	struct locomo *lchip = irq_get_chip_data(irq);
+	struct locomo *lchip = irq_desc_get_chip_data(desc);
 	int req, i;
 
 	/* Acknowledge the parent IRQ */
@@ -150,6 +150,8 @@ static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
 
 	if (req) {
+		unsigned int irq;
+
 		/* generate the next interrupt(s) */
 		irq = lchip->irq_base;
 		for (i = 0; i <= 3; i++, irq++) {
@@ -205,7 +207,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	for ( ; irq <= lchip->irq_base + 3; irq++) {
 		irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
 		irq_set_chip_data(irq, lchip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 }
 
@@ -475,8 +477,7 @@ static void __locomo_remove(struct locomo *lchip)
 	device_for_each_child(lchip->dev, NULL, locomo_remove_child);
 
 	if (lchip->irq != NO_IRQ) {
-		irq_set_chained_handler(lchip->irq, NULL);
-		irq_set_handler_data(lchip->irq, NULL);
+		irq_set_chained_handler_and_data(lchip->irq, NULL, NULL);
 	}
 
 	iounmap(lchip->base);
diff --git a/kernel/arch/arm/common/mcpm_entry.c b/kernel/arch/arm/common/mcpm_entry.c
index 5f8a52ac7..a923524d1 100644
--- a/kernel/arch/arm/common/mcpm_entry.c
+++ b/kernel/arch/arm/common/mcpm_entry.c
@@ -20,6 +20,126 @@
 #include <asm/cputype.h>
 #include <asm/suspend.h>
 
+/*
+ * The public API for this code is documented in arch/arm/include/asm/mcpm.h.
+ * For a comprehensive description of the main algorithm used here, please
+ * see Documentation/arm/cluster-pm-race-avoidance.txt.
+ */
+
+struct sync_struct mcpm_sync;
+
+/*
+ * __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
+ *    This must be called at the point of committing to teardown of a CPU.
+ *    The CPU cache (SCTRL.C bit) is expected to still be active.
+ */
+static void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster)
+{
+	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN;
+	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
+}
+
+/*
+ * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
+ *    cluster can be torn down without disrupting this CPU.
+ *    To avoid deadlocks, this must be called before a CPU is powered down.
+ *    The CPU cache (SCTRL.C bit) is expected to be off.
+ *    However L2 cache might or might not be active.
+ */
+static void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster)
+{
+	dmb();
+	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN;
+	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
+	sev();
+}
+
+/*
+ * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
+ * @state: the final state of the cluster:
+ *     CLUSTER_UP: no destructive teardown was done and the cluster has been
+ *         restored to the previous state (CPU cache still active); or
+ *     CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
+ *         (CPU cache disabled, L2 cache either enabled or disabled).
+ */
+static void __mcpm_outbound_leave_critical(unsigned int cluster, int state)
+{
+	dmb();
+	mcpm_sync.clusters[cluster].cluster = state;
+	sync_cache_w(&mcpm_sync.clusters[cluster].cluster);
+	sev();
+}
+
+/*
+ * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
+ * This function should be called by the last man, after local CPU teardown
+ * is complete.  CPU cache expected to be active.
+ *
+ * Returns:
+ *     false: the critical section was not entered because an inbound CPU was
+ *         observed, or the cluster is already being set up;
+ *     true: the critical section was entered: it is now safe to tear down the
+ *         cluster.
+ */
+static bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int i;
+	struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster];
+
+	/* Warn inbound CPUs that the cluster is being torn down: */
+	c->cluster = CLUSTER_GOING_DOWN;
+	sync_cache_w(&c->cluster);
+
+	/* Back out if the inbound cluster is already in the critical region: */
+	sync_cache_r(&c->inbound);
+	if (c->inbound == INBOUND_COMING_UP)
+		goto abort;
+
+	/*
+	 * Wait for all CPUs to get out of the GOING_DOWN state, so that local
+	 * teardown is complete on each CPU before tearing down the cluster.
+	 *
+	 * If any CPU has been woken up again from the DOWN state, then we
+	 * shouldn't be taking the cluster down at all: abort in that case.
+	 */
+	sync_cache_r(&c->cpus);
+	for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) {
+		int cpustate;
+
+		if (i == cpu)
+			continue;
+
+		while (1) {
+			cpustate = c->cpus[i].cpu;
+			if (cpustate != CPU_GOING_DOWN)
+				break;
+
+			wfe();
+			sync_cache_r(&c->cpus[i].cpu);
+		}
+
+		switch (cpustate) {
+		case CPU_DOWN:
+			continue;
+
+		default:
+			goto abort;
+		}
+	}
+
+	return true;
+
+abort:
+	__mcpm_outbound_leave_critical(cluster, CLUSTER_UP);
+	return false;
+}
+
+static int __mcpm_cluster_state(unsigned int cluster)
+{
+	sync_cache_r(&mcpm_sync.clusters[cluster].cluster);
+	return mcpm_sync.clusters[cluster].cluster;
+}
+
 extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
 
 void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
@@ -78,16 +198,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
 	bool cpu_is_down, cluster_is_down;
 	int ret = 0;
 
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (!platform_ops)
 		return -EUNATCH; /* try not to shadow power_up errors */
 	might_sleep();
 
-	/* backward compatibility callback */
-	if (platform_ops->power_up)
-		return platform_ops->power_up(cpu, cluster);
-
-	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
-
 	/*
 	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
 	 * variant exists, we need to disable IRQs manually here.
@@ -128,29 +243,17 @@ void mcpm_cpu_power_down(void)
 	bool cpu_going_down, last_man;
 	phys_reset_t phys_reset;
 
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (WARN_ON_ONCE(!platform_ops))
 	       return;
 	BUG_ON(!irqs_disabled());
 
-	/*
-	 * Do this before calling into the power_down method,
-	 * as it might not always be safe to do afterwards.
-	 */
 	setup_mm_for_reboot();
 
-	/* backward compatibility callback */
-	if (platform_ops->power_down) {
-		platform_ops->power_down();
-		goto not_dead;
-	}
-
-	mpidr = read_cpuid_mpidr();
-	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
-
 	__mcpm_cpu_going_down(cpu, cluster);
-
 	arch_spin_lock(&mcpm_lock);
 	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
 
@@ -187,7 +290,6 @@ void mcpm_cpu_power_down(void)
 	if (cpu_going_down)
 		wfi();
 
-not_dead:
 	/*
 	 * It is possible for a power_up request to happen concurrently
 	 * with a power_down request for the same CPU. In this case the
@@ -219,22 +321,11 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster)
 	return ret;
 }
 
-void mcpm_cpu_suspend(u64 expected_residency)
+void mcpm_cpu_suspend(void)
 {
 	if (WARN_ON_ONCE(!platform_ops))
 		return;
 
-	/* backward compatibility callback */
-	if (platform_ops->suspend) {
-		phys_reset_t phys_reset;
-		BUG_ON(!irqs_disabled());
-		setup_mm_for_reboot();
-		platform_ops->suspend(expected_residency);
-		phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset);
-		phys_reset(virt_to_phys(mcpm_entry_point));
-		BUG();
-	}
-
 	/* Some platforms might have to enable special resume modes, etc. */
 	if (platform_ops->cpu_suspend_prepare) {
 		unsigned int mpidr = read_cpuid_mpidr();
@@ -256,12 +347,6 @@ int mcpm_cpu_powered_up(void)
 	if (!platform_ops)
 		return -EUNATCH;
 
-	/* backward compatibility callback */
-	if (platform_ops->powered_up) {
-		platform_ops->powered_up();
-		return 0;
-	}
-
 	mpidr = read_cpuid_mpidr();
 	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
@@ -334,120 +419,6 @@ int __init mcpm_loopback(void (*cache_disable)(void))
 
 #endif
 
-struct sync_struct mcpm_sync;
-
-/*
- * __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
- *    This must be called at the point of committing to teardown of a CPU.
- *    The CPU cache (SCTRL.C bit) is expected to still be active.
- */
-void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster)
-{
-	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN;
-	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
-}
-
-/*
- * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
- *    cluster can be torn down without disrupting this CPU.
- *    To avoid deadlocks, this must be called before a CPU is powered down.
- *    The CPU cache (SCTRL.C bit) is expected to be off.
- *    However L2 cache might or might not be active.
- */
-void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster)
-{
-	dmb();
-	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN;
-	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
-	sev();
-}
-
-/*
- * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
- * @state: the final state of the cluster:
- *     CLUSTER_UP: no destructive teardown was done and the cluster has been
- *         restored to the previous state (CPU cache still active); or
- *     CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
- *         (CPU cache disabled, L2 cache either enabled or disabled).
- */
-void __mcpm_outbound_leave_critical(unsigned int cluster, int state)
-{
-	dmb();
-	mcpm_sync.clusters[cluster].cluster = state;
-	sync_cache_w(&mcpm_sync.clusters[cluster].cluster);
-	sev();
-}
-
-/*
- * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
- * This function should be called by the last man, after local CPU teardown
- * is complete.  CPU cache expected to be active.
- *
- * Returns:
- *     false: the critical section was not entered because an inbound CPU was
- *         observed, or the cluster is already being set up;
- *     true: the critical section was entered: it is now safe to tear down the
- *         cluster.
- */
-bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster)
-{
-	unsigned int i;
-	struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster];
-
-	/* Warn inbound CPUs that the cluster is being torn down: */
-	c->cluster = CLUSTER_GOING_DOWN;
-	sync_cache_w(&c->cluster);
-
-	/* Back out if the inbound cluster is already in the critical region: */
-	sync_cache_r(&c->inbound);
-	if (c->inbound == INBOUND_COMING_UP)
-		goto abort;
-
-	/*
-	 * Wait for all CPUs to get out of the GOING_DOWN state, so that local
-	 * teardown is complete on each CPU before tearing down the cluster.
-	 *
-	 * If any CPU has been woken up again from the DOWN state, then we
-	 * shouldn't be taking the cluster down at all: abort in that case.
-	 */
-	sync_cache_r(&c->cpus);
-	for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) {
-		int cpustate;
-
-		if (i == cpu)
-			continue;
-
-		while (1) {
-			cpustate = c->cpus[i].cpu;
-			if (cpustate != CPU_GOING_DOWN)
-				break;
-
-			wfe();
-			sync_cache_r(&c->cpus[i].cpu);
-		}
-
-		switch (cpustate) {
-		case CPU_DOWN:
-			continue;
-
-		default:
-			goto abort;
-		}
-	}
-
-	return true;
-
-abort:
-	__mcpm_outbound_leave_critical(cluster, CLUSTER_UP);
-	return false;
-}
-
-int __mcpm_cluster_state(unsigned int cluster)
-{
-	sync_cache_r(&mcpm_sync.clusters[cluster].cluster);
-	return mcpm_sync.clusters[cluster].cluster;
-}
-
 extern unsigned long mcpm_power_up_setup_phys;
 
 int __init mcpm_sync_init(
diff --git a/kernel/arch/arm/common/mcpm_head.S b/kernel/arch/arm/common/mcpm_head.S
index e02db4b81..08b3bb9bc 100644
--- a/kernel/arch/arm/common/mcpm_head.S
+++ b/kernel/arch/arm/common/mcpm_head.S
@@ -49,7 +49,7 @@
 ENTRY(mcpm_entry_point)
 
  ARM_BE8(setend        be)
- THUMB(	adr	r12, BSYM(1f)	)
+ THUMB(	badr	r12, 1f		)
  THUMB(	bx	r12		)
  THUMB(	.thumb			)
 1:
diff --git a/kernel/arch/arm/common/mcpm_platsmp.c b/kernel/arch/arm/common/mcpm_platsmp.c
index 92e54d7c6..2b25b6038 100644
--- a/kernel/arch/arm/common/mcpm_platsmp.c
+++ b/kernel/arch/arm/common/mcpm_platsmp.c
@@ -65,14 +65,10 @@ static int mcpm_cpu_kill(unsigned int cpu)
 	return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster);
 }
 
-static int mcpm_cpu_disable(unsigned int cpu)
+static bool mcpm_cpu_can_disable(unsigned int cpu)
 {
-	/*
-	 * We assume all CPUs may be shut down.
-	 * This would be the hook to use for eventual Secure
-	 * OS migration requests as described in the PSCI spec.
-	 */
-	return 0;
+	/* We assume all CPUs may be shut down. */
+	return true;
 }
 
 static void mcpm_cpu_die(unsigned int cpu)
@@ -92,7 +88,7 @@ static struct smp_operations __initdata mcpm_smp_ops = {
 	.smp_secondary_init	= mcpm_secondary_init,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= mcpm_cpu_kill,
-	.cpu_disable		= mcpm_cpu_disable,
+	.cpu_can_disable	= mcpm_cpu_can_disable,
 	.cpu_die		= mcpm_cpu_die,
 #endif
 };
diff --git a/kernel/arch/arm/common/sa1111.c b/kernel/arch/arm/common/sa1111.c
index 5cc779c8e..3d224941b 100644
--- a/kernel/arch/arm/common/sa1111.c
+++ b/kernel/arch/arm/common/sa1111.c
@@ -196,11 +196,10 @@ static struct sa1111_dev_info sa1111_devices[] = {
  * active IRQs causes the interrupt output to pulse, the upper levels
  * will call us again if there are more interrupts to process.
  */
-static void
-sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void sa1111_irq_handler(struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
-	struct sa1111 *sachip = irq_get_handler_data(irq);
+	struct sa1111 *sachip = irq_desc_get_handler_data(desc);
 	void __iomem *mapbase = sachip->base + SA1111_INTC;
 
 	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
@@ -213,7 +212,7 @@ sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
 
 	if (stat0 == 0 && stat1 == 0) {
-		do_bad_IRQ(irq, desc);
+		do_bad_IRQ(desc);
 		return;
 	}
 
@@ -486,7 +485,7 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 		irq_set_chip_and_handler(irq, &sa1111_low_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
@@ -494,15 +493,15 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 		irq_set_chip_and_handler(irq, &sa1111_high_chip,
 					 handle_edge_irq);
 		irq_set_chip_data(irq, sachip);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
 
 	/*
 	 * Register SA1111 interrupt
 	 */
 	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
-	irq_set_handler_data(sachip->irq, sachip);
-	irq_set_chained_handler(sachip->irq, sa1111_irq_handler);
+	irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
+					 sachip);
 
 	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
 		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
@@ -836,8 +835,7 @@ static void __sa1111_remove(struct sa1111 *sachip)
 	clk_unprepare(sachip->clk);
 
 	if (sachip->irq != NO_IRQ) {
-		irq_set_chained_handler(sachip->irq, NULL);
-		irq_set_handler_data(sachip->irq, NULL);
+		irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
 		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
 
 		release_mem_region(sachip->phys + SA1111_INTC, 512);
diff --git a/kernel/arch/arm/common/timer-sp.c b/kernel/arch/arm/common/timer-sp.c
deleted file mode 100644
index 192113247..000000000
--- a/kernel/arch/arm/common/timer-sp.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- *  linux/arch/arm/common/timer-sp.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
-
-static long __init sp804_get_clock_rate(struct clk *clk)
-{
-	long rate;
-	int err;
-
-	err = clk_prepare(clk);
-	if (err) {
-		pr_err("sp804: clock failed to prepare: %d\n", err);
-		clk_put(clk);
-		return err;
-	}
-
-	err = clk_enable(clk);
-	if (err) {
-		pr_err("sp804: clock failed to enable: %d\n", err);
-		clk_unprepare(clk);
-		clk_put(clk);
-		return err;
-	}
-
-	rate = clk_get_rate(clk);
-	if (rate < 0) {
-		pr_err("sp804: clock failed to get rate: %ld\n", rate);
-		clk_disable(clk);
-		clk_unprepare(clk);
-		clk_put(clk);
-	}
-
-	return rate;
-}
-
-static void __iomem *sched_clock_base;
-
-static u64 notrace sp804_read(void)
-{
-	return ~readl_relaxed(sched_clock_base + TIMER_VALUE);
-}
-
-void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
-						     const char *name,
-						     struct clk *clk,
-						     int use_sched_clock)
-{
-	long rate;
-
-	if (!clk) {
-		clk = clk_get_sys("sp804", name);
-		if (IS_ERR(clk)) {
-			pr_err("sp804: clock not found: %d\n",
-			       (int)PTR_ERR(clk));
-			return;
-		}
-	}
-
-	rate = sp804_get_clock_rate(clk);
-
-	if (rate < 0)
-		return;
-
-	/* setup timer 0 as free-running clocksource */
-	writel(0, base + TIMER_CTRL);
-	writel(0xffffffff, base + TIMER_LOAD);
-	writel(0xffffffff, base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		base + TIMER_CTRL);
-
-	clocksource_mmio_init(base + TIMER_VALUE, name,
-		rate, 200, 32, clocksource_mmio_readl_down);
-
-	if (use_sched_clock) {
-		sched_clock_base = base;
-		sched_clock_register(sp804_read, 32, rate);
-	}
-}
-
-
-static void __iomem *clkevt_base;
-static unsigned long clkevt_reload;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	/* clear the interrupt */
-	writel(1, clkevt_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static void sp804_set_mode(enum clock_event_mode mode,
-	struct clock_event_device *evt)
-{
-	unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(clkevt_reload, clkevt_base + TIMER_LOAD);
-		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
-		break;
-
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl |= TIMER_CTRL_ONESHOT;
-		break;
-
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		break;
-	}
-
-	writel(ctrl, clkevt_base + TIMER_CTRL);
-}
-
-static int sp804_set_next_event(unsigned long next,
-	struct clock_event_device *evt)
-{
-	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
-
-	writel(next, clkevt_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device sp804_clockevent = {
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
-		CLOCK_EVT_FEAT_DYNIRQ,
-	.set_mode	= sp804_set_mode,
-	.set_next_event	= sp804_set_next_event,
-	.rating		= 300,
-};
-
-static struct irqaction sp804_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sp804_timer_interrupt,
-	.dev_id		= &sp804_clockevent,
-};
-
-void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
-{
-	struct clock_event_device *evt = &sp804_clockevent;
-	long rate;
-
-	if (!clk)
-		clk = clk_get_sys("sp804", name);
-	if (IS_ERR(clk)) {
-		pr_err("sp804: %s clock not found: %d\n", name,
-			(int)PTR_ERR(clk));
-		return;
-	}
-
-	rate = sp804_get_clock_rate(clk);
-	if (rate < 0)
-		return;
-
-	clkevt_base = base;
-	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
-	evt->name = name;
-	evt->irq = irq;
-	evt->cpumask = cpu_possible_mask;
-
-	writel(0, base + TIMER_CTRL);
-
-	setup_irq(irq, &sp804_timer_irq);
-	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
-}
-
-static void __init sp804_of_init(struct device_node *np)
-{
-	static bool initialized = false;
-	void __iomem *base;
-	int irq;
-	u32 irq_num = 0;
-	struct clk *clk1, *clk2;
-	const char *name = of_get_property(np, "compatible", NULL);
-
-	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
-
-	/* Ensure timers are disabled */
-	writel(0, base + TIMER_CTRL);
-	writel(0, base + TIMER_2_BASE + TIMER_CTRL);
-
-	if (initialized || !of_device_is_available(np))
-		goto err;
-
-	clk1 = of_clk_get(np, 0);
-	if (IS_ERR(clk1))
-		clk1 = NULL;
-
-	/* Get the 2nd clock if the timer has 3 timer clocks */
-	if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
-		clk2 = of_clk_get(np, 1);
-		if (IS_ERR(clk2)) {
-			pr_err("sp804: %s clock not found: %d\n", np->name,
-				(int)PTR_ERR(clk2));
-			clk2 = NULL;
-		}
-	} else
-		clk2 = clk1;
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (irq <= 0)
-		goto err;
-
-	of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
-	if (irq_num == 2) {
-		__sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
-		__sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
-	} else {
-		__sp804_clockevents_init(base, irq, clk1 , name);
-		__sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
-							 name, clk2, 1);
-	}
-	initialized = true;
-
-	return;
-err:
-	iounmap(base);
-}
-CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
-
-static void __init integrator_cp_of_init(struct device_node *np)
-{
-	static int init_count = 0;
-	void __iomem *base;
-	int irq;
-	const char *name = of_get_property(np, "compatible", NULL);
-	struct clk *clk;
-
-	base = of_iomap(np, 0);
-	if (WARN_ON(!base))
-		return;
-	clk = of_clk_get(np, 0);
-	if (WARN_ON(IS_ERR(clk)))
-		return;
-
-	/* Ensure timer is disabled */
-	writel(0, base + TIMER_CTRL);
-
-	if (init_count == 2 || !of_device_is_available(np))
-		goto err;
-
-	if (!init_count)
-		__sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
-	else {
-		irq = irq_of_parse_and_map(np, 0);
-		if (irq <= 0)
-			goto err;
-
-		__sp804_clockevents_init(base, irq, clk, name);
-	}
-
-	init_count++;
-	return;
-err:
-	iounmap(base);
-}
-CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);