diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arm/boot/dts/ste-snowball.dts | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arm/boot/dts/ste-snowball.dts')
-rw-r--r-- | kernel/arch/arm/boot/dts/ste-snowball.dts | 58 |
1 files changed, 49 insertions, 9 deletions
diff --git a/kernel/arch/arm/boot/dts/ste-snowball.dts b/kernel/arch/arm/boot/dts/ste-snowball.dts index 1bc84ebdc..e80e42163 100644 --- a/kernel/arch/arm/boot/dts/ste-snowball.dts +++ b/kernel/arch/arm/boot/dts/ste-snowball.dts @@ -18,6 +18,13 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -40,35 +47,35 @@ button@1 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <2>; label = "userpb"; gpios = <&gpio1 0 0x4>; }; button@2 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <3>; label = "extkb1"; gpios = <&gpio4 23 0x4>; }; button@3 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <4>; label = "extkb2"; gpios = <&gpio4 24 0x4>; }; button@4 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <5>; label = "extkb3"; gpios = <&gpio5 1 0x4>; }; button@5 { debounce_interval = <50>; - wakeup = <1>; + wakeup-source; linux,code = <6>; label = "extkb4"; gpios = <&gpio5 2 0x4>; @@ -223,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -262,15 +269,19 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_snowball_mode>; + interrupt-parent = <&gpio5>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */ + <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */ }; - lsm303dlm@1e { + lsm303dlh@1e { /* Magnetometer */ - compatible = "st,lsm303dlm-magn"; + compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&magneto_snowball_mode>; + gpios = <&gpio5 5 0x4>; /* DRDY line */ }; l3g4200d@68 { /* Gyroscope */ @@ -279,6 +290,11 @@ reg = <0x68>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_snowball_mode>; + gpios = <&gpio5 6 0x4>; /* DRDY line */ + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ }; lsp001wm@5c { /* Barometer/pressure sensor */ @@ -443,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { @@ -489,6 +519,16 @@ }; }; }; + gyro { + gyro_snowball_mode: gyro_snowball { + snowball_cfg1 { + pins = + "GPIO166_A22", /* DRDY */ + "GPIO169_D22"; /* INT */ + ste,config = <&gpio_in_pu>; + }; + }; + }; magnetometer { magneto_snowball_mode: magneto_snowball { snowball_cfg1 { |