Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 128 insertions, 0 deletions

diff --git a/kernel/arch/arm/boot/dts/ste-hrefprev60.dtsi b/kernel/arch/arm/boot/dts/ste-hrefprev60.dtsi
new file mode 100644
index 000000000..7f3975b58
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Device Tree for the HREF+ prior to the v60 variant.
+ */
+
+#include "ste-dbx5x0.dtsi"
+#include "ste-href-ab8500.dtsi"
+#include "ste-href.dtsi"
+
+/ {
+	gpio_keys {
+		button@1 {
+			gpios = <&tc3589x_gpio 7 0x4>;
+		};
+	};
+
+	soc {
+		i2c@80004000 {
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+
+			tc35892@42 {
+				compatible = "toshiba,tc35892";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35892_hrefprev60_mode>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		ssp@80002000 {
+			/*
+			 * On the first generation boards, this SSP/SPI port was connected
+			 * to the AB8500.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ssp0_hrefprev60_mode>;
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&tc3589x_gpio 18 0x4>;
+			enable-gpio = <&tc3589x_gpio 17 0x4>;
+		};
+
+		pinctrl {
+			/* Set this up using hogs */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ipgpio_hrefprev60_mode>;
+
+			ssp0 {
+				ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
+					hrefprev60_mux {
+						function = "ssp0";
+						groups = "ssp0_a_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO145_C13"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+
+				};
+			};
+			sdi0 {
+				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
+				sdi0_default_mode: sdi0_default {
+					hrefprev60_mux {
+						function = "mc0";
+						groups = "mc0dat31dir_a_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO21_AB3"; /* DAT31DIR */
+						ste,config = <&out_hi>;
+					};
+
+				};
+			};
+			tc35892 {
+				tc35892_hrefprev60_mode: tc35892_hrefprev60 {
+					hrefprev60_cfg {
+						pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			ipgpio {
+				 ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
+					hrefprev60_mux {
+						function = "ipgpio";
+						groups = "ipgpio0_c_1", "ipgpio1_c_1";
+					};
+					hrefprev60_cfg1 {
+						pins = "GPIO6_AF6", "GPIO7_AG5";
+						ste,config = <&in_pu>;
+					};
+				 };
+			};
+		};
+	};
+};