These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 150 deletions

diff --git a/kernel/arch/arm/boot/dts/kizbox.dts b/kernel/arch/arm/boot/dts/kizbox.dts
deleted file mode 100644
index e83e4f931..000000000
--- a/kernel/arch/arm/boot/dts/kizbox.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-
-	model = "Overkiz kizbox";
-	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
-	};
-
-	memory {
-		reg = <0x20000000 0x2000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			status = "okay";
-
-			bootloaderkernel@0 {
-				label = "bootloader-kernel";
-				reg = <0x0 0xc0000>;
-			};
-
-			ubi@c0000 {
-				label = "ubi";
-				reg = <0xc0000 0x7f40000>;
-			};
-
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-	};
-
-	i2c@0 {
-		status = "okay";
-
-		pcf8563@51 {
-			/* nxp pcf8563 rtc */
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1g {
-			label = "led1:green";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led1r {
-			label = "led1:red";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led2g {
-			label = "led2:green";
-			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led2r {
-			label = "led2:red";
-			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "reset";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
-		};
-
-		mode {
-			label = "mode";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-			gpio-key,wakeup;
-		};
-	};
-};