diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arm/boot/dts/kizbox.dts | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arm/boot/dts/kizbox.dts')
-rw-r--r-- | kernel/arch/arm/boot/dts/kizbox.dts | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/kernel/arch/arm/boot/dts/kizbox.dts b/kernel/arch/arm/boot/dts/kizbox.dts deleted file mode 100644 index e83e4f931..000000000 --- a/kernel/arch/arm/boot/dts/kizbox.dts +++ /dev/null @@ -1,150 +0,0 @@ -/* - * kizbox.dts - Device Tree file for Overkiz Kizbox board - * - * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com> - * - * Licensed under GPLv2. - */ -/dts-v1/; -#include "at91sam9g20.dtsi" - -/ { - - model = "Overkiz kizbox"; - compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; - }; - - memory { - reg = <0x20000000 0x2000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@fffb0000 { - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; - }; - - watchdog@fffffd40 { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - status = "okay"; - - bootloaderkernel@0 { - label = "bootloader-kernel"; - reg = <0x0 0xc0000>; - }; - - ubi@c0000 { - label = "ubi"; - reg = <0xc0000 0x7f40000>; - }; - - }; - - usb0: ohci@00500000 { - num-ports = <1>; - status = "okay"; - }; - }; - - i2c@0 { - status = "okay"; - - pcf8563@51 { - /* nxp pcf8563 rtc */ - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - }; - - leds { - compatible = "gpio-leds"; - - led1g { - label = "led1:green"; - gpios = <&pioB 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led1r { - label = "led1:red"; - gpios = <&pioB 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led2g { - label = "led2:green"; - gpios = <&pioB 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - default-state = "on"; - }; - - led2r { - label = "led2:red"; - gpios = <&pioB 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "reset"; - gpios = <&pioB 30 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - gpio-key,wakeup; - }; - - mode { - label = "mode"; - gpios = <&pioB 31 GPIO_ACTIVE_LOW>; - linux,code = <0x101>; - gpio-key,wakeup; - }; - }; -}; |