Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/kernel/arch/arm/boot/dts/kirkwood-ts419.dtsi b/kernel/arch/arm/boot/dts/kirkwood-ts419.dtsi
new file mode 100644
index 000000000..30ab93bfb
--- /dev/null
+++ b/kernel/arch/arm/boot/dts/kirkwood-ts419.dtsi
@@ -0,0 +1,75 @@
+/*
+ * Device Tree include file for QNAP TS41X
+ *
+ * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/ {
+	model = "QNAP TS419 family";
+	compatible = "qnap,ts419", "marvell,kirkwood";
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-names = "default";
+
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			/*
+			 * JP1 indicates if an LCD module is installed
+			 * on the serial port (0), or if the port is used
+			 * as a console (1).
+			 */
+			pmx_jumper_jp1: pmx-jumper_jp1 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "USB Copy";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+		button@2 {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy1: ethernet-phy@1 {
+		device_type = "ethernet-phy";
+                /* overwrite reg property in board file */
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		phy-handle = <&ethphy1>;
+	};
+};