diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts')
-rw-r--r-- | kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts | 648 |
1 files changed, 327 insertions, 321 deletions
diff --git a/kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts b/kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts index d4f2b1131..81b7ec7b3 100644 --- a/kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/kernel/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Universal C210 based on Exynos4210 rev0"; @@ -65,89 +66,29 @@ regulator-name = "VMEM_VDD_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe1 3 0>; + gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; - hsotg@12480000 { - vusb_d-supply = <&ldo3_reg>; - vusb_a-supply = <&ldo8_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - - sdhci_emmc: sdhci@12510000 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; - }; - - sdhci_sd: sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 0>; - cd-inverted; - status = "okay"; - }; - - ehci@12580000 { - status = "okay"; - port@0 { - status = "okay"; - }; - }; - - ohci@12590000 { - status = "okay"; - port@0 { - status = "okay"; - }; - }; - - exynos-usbphy@125B0000 { - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys"; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <1>; }; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <1>; }; config-key { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <171>; label = "config"; debounce-interval = <1>; @@ -155,14 +96,14 @@ }; camera-key { - gpios = <&gpx2 3 1>; + gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; linux,code = <212>; label = "camera"; debounce-interval = <1>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <1>; @@ -170,7 +111,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <1>; @@ -182,238 +123,26 @@ regulator-name = "TSP_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 3 0>; + gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - tsp@4a { - /* TBD: Atmel maXtouch touchscreen */ - reg = <0x4a>; - }; - }; - - i2c@138B0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - vdd_arm_reg: pmic@60 { - compatible = "maxim,max8952"; - reg = <0x60>; - - max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; - max8952,default-mode = <0>; - max8952,dvs-mode-microvolt = <1250000>, <1200000>, - <1050000>, <950000>; - max8952,sync-freq = <0>; - max8952,ramp-speed = <0>; - - regulator-name = "vdd_arm"; - regulator-min-microvolt = <770000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - pmic@66 { - compatible = "national,lp3974"; - reg = <0x66>; - - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>; - max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, - <1100000>, <1000000>; - - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; - max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; - - regulators { - ldo2_reg: LDO2 { - regulator-name = "VALIVE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VUSB+MIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "LDO6"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VLCD+VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "VCC_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "VPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "CAM_AF_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "PS_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "VHIC_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "CAM_I_HOST_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "CAM_S_ANA_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo17_reg: LDO17 { - regulator-name = "VCC_3.0V_LCD"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VINT_1.1V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "VG3D_1.1V"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "VCC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "VMEM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ap32khz_reg: EN32KHz-AP { - regulator-name = "32KHz AP"; - regulator-always-on; - }; - - cp32khz_reg: EN32KHz-CP { - regulator-name = "32KHz CP"; - }; - - vichg_reg: ENVICHG { - regulator-name = "VICHG"; - }; - - safeout1_reg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-always-on; - }; - - safeout2_reg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - }; - }; - }; - spi-lcd { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpy3 1 0>; - gpio-mosi = <&gpy3 3 0>; + gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 0>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; lcd@0 { compatible = "samsung,ld9040"; reg = <0>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; spi-cpol; spi-cpha; @@ -446,27 +175,6 @@ }; }; - fimd: fimd@11c00000 { - pinctrl-0 = <&lcd_clk>, <&lcd_data24>; - pinctrl-names = "default"; - status = "okay"; - samsung,invert-vden; - samsung,invert-vclk; - #address-cells = <1>; - #size-cells = <0>; - port@3 { - reg = <3>; - fimd_dpi_ep: endpoint { - remote-endpoint = <&lcd_ep>; - }; - }; - }; - - pwm@139D0000 { - compatible = "samsung,s5p6440-pwm"; - status = "okay"; - }; - camera { status = "okay"; @@ -511,13 +219,13 @@ regulator-name = "HDMI_5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpe0 1 0>; + gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; hdmi_ddc: i2c-ddc { compatible = "i2c-gpio"; - gpios = <&gpe4 2 0 &gpe4 3 0>; + gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -526,24 +234,286 @@ pinctrl-names = "default"; status = "okay"; }; +}; + +&cpu0 { + cpu0-supply = <&vdd_arm_reg>; +}; - mixer@12C10000 { +&ehci { + status = "okay"; + port@0 { status = "okay"; }; +}; - hdmi@12D00000 { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - hdmi-en-supply = <&hdmi_en>; - vdd-supply = <&ldo3_reg>; - vdd_osc-supply = <&ldo4_reg>; - vdd_pll-supply = <&ldo3_reg>; - ddc = <&hdmi_ddc>; - status = "okay"; +&exynos_usbphy { + status = "okay"; + vbus-supply = <&safeout1_reg>; +}; + +&fimd { + pinctrl-0 = <&lcd_clk>, <&lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + samsung,invert-vden; + samsung,invert-vclk; + #address-cells = <1>; + #size-cells = <0>; + port@3 { + reg = <3>; + fimd_dpi_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + hdmi-en-supply = <&hdmi_en>; + vdd-supply = <&ldo3_reg>; + vdd_osc-supply = <&ldo4_reg>; + vdd_pll-supply = <&ldo3_reg>; + ddc = <&hdmi_ddc>; + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo3_reg>; + vusb_a-supply = <&ldo8_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + tsp@4a { + /* TBD: Atmel maXtouch touchscreen */ + reg = <0x4a>; + }; +}; + +&i2c_5 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + vdd_arm_reg: pmic@60 { + compatible = "maxim,max8952"; + reg = <0x60>; + + max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, + <&gpx0 4 GPIO_ACTIVE_HIGH>; + max8952,default-mode = <0>; + max8952,dvs-mode-microvolt = <1250000>, <1200000>, + <1050000>, <950000>; + max8952,sync-freq = <0>; + max8952,ramp-speed = <0>; + + regulator-name = "vdd_arm"; + regulator-min-microvolt = <770000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; }; +}; - i2c@138E0000 { +&i2c_8 { + status = "okay"; +}; + +&mdma1 { + reg = <0x12840000 0x1000>; +}; + +&mixer { + status = "okay"; +}; + +&ohci { + status = "okay"; + port@0 { status = "okay"; }; }; @@ -564,6 +534,42 @@ }; }; -&mdma1 { - reg = <0x12840000 0x1000>; +&pwm { + compatible = "samsung,s5p6440-pwm"; + status = "okay"; +}; + +&sdhci_0 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo5_reg>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; }; |