diff options
author | Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 12:17:53 -0700 |
---|---|---|
committer | Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 15:44:42 -0700 |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/arch/arm/boot/dts/armada-388-gp.dts | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/arch/arm/boot/dts/armada-388-gp.dts')
-rw-r--r-- | kernel/arch/arm/boot/dts/armada-388-gp.dts | 413 |
1 files changed, 413 insertions, 0 deletions
diff --git a/kernel/arch/arm/boot/dts/armada-388-gp.dts b/kernel/arch/arm/boot/dts/armada-388-gp.dts new file mode 100644 index 000000000..78514ab0b --- /dev/null +++ b/kernel/arch/arm/boot/dts/armada-388-gp.dts @@ -0,0 +1,413 @@ +/* + * Device Tree file for Marvell Armada 385 development board + * (RD-88F6820-GP) + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-388.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 GP"; + compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + spi@10600 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <100000>; + /* + * The EEPROM located at adresse 54 is needed + * for the boot - DO NOT ERASE IT - + */ + + expander0: pca9555@20 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + pinctrl-0 = <&pca0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x20>; + }; + + expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x21>; + }; + + }; + + serial@12000 { + /* + * Exported on the micro USB connector CON16 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + + /* GE1 CON15 */ + ethernet@30000 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* CON4 */ + usb@58000 { + vcc-supply = <®_usb2_0_vbus>; + status = "okay"; + }; + + /* GE0 CON1 */ + ethernet@70000 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + + mdio@72004 { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + + sata@a8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata0_pins>, <&sata1_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata0>; + }; + + sata1: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata1>; + }; + }; + + sata@e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&sata2_pins>, <&sata3_pins>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata2: sata-port@0 { + reg = <0>; + target-supply = <®_5v_sata2>; + }; + + sata3: sata-port@1 { + reg = <1>; + target-supply = <®_5v_sata3>; + }; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; + no-1-8-v; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + /* CON5 */ + usb3@f0000 { + vcc-supply = <®_usb2_1_vbus>; + status = "okay"; + }; + + /* CON7 */ + usb3@f8000 { + vcc-supply = <®_usb3_vbus>; + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + /* + * One PCIe units is accessible through + * standard PCIe slot on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * The two other PCIe units are accessible + * through mini PCIe slot on the board. + */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = < 0 0 + 3000 1>; + }; + }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_0_vbus: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander1 14 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_usb2_1_vbus: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 4 GPIO_ACTIVE_HIGH>; + }; + + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + enable-active-high; + regulator-always-on; + + }; + + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata0>; + }; + + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata0>; + }; + + reg_sata1: pwr-sata1 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata1>; + }; + + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata1>; + }; + + reg_sata2: pwr-sata2 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata2"; + enable-active-high; + regulator-always-on; + gpio = <&expander0 11 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata2: v5-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata2>; + }; + + reg_12v_sata2: v12-sata2 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata2>; + }; + + reg_sata3: pwr-sata3 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata3"; + enable-active-high; + regulator-always-on; + gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; + }; + + reg_5v_sata3: v5-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <®_sata3>; + }; + + reg_12v_sata3: v12-sata3 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata3"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + vin-supply = <®_sata3>; + }; +}; + +&pinctrl { + pca0_pins: pca0_pins { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; |