diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arm/Kconfig.debug | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arm/Kconfig.debug')
-rw-r--r-- | kernel/arch/arm/Kconfig.debug | 131 |
1 files changed, 88 insertions, 43 deletions
diff --git a/kernel/arch/arm/Kconfig.debug b/kernel/arch/arm/Kconfig.debug index 0c12ffb15..ddbb36126 100644 --- a/kernel/arch/arm/Kconfig.debug +++ b/kernel/arch/arm/Kconfig.debug @@ -5,6 +5,7 @@ source "lib/Kconfig.debug" config ARM_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL + depends on MMU select DEBUG_FS ---help--- Say Y here if you want to show the kernel pagetable layout in a @@ -122,23 +123,23 @@ choice 0x80020000 | 0xf0020000 | UART8 0x80024000 | 0xf0024000 | UART9 - config AT91_DEBUG_LL_DBGU0 - bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12" - select DEBUG_AT91_UART + config DEBUG_AT91_UART + bool "Kernel low-level debugging on Atmel SoCs" depends on ARCH_AT91 - depends on SOC_AT91RM9200 || SOC_AT91SAM9 + help + Say Y here if you want the debug print routines to direct + their output to the serial port on atmel devices. - config AT91_DEBUG_LL_DBGU1 - bool "Kernel low-level debugging on 9263, 9g45 and sama5d3" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_AT91SAM9 || SOC_SAMA5 + SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT + rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU + 9261/9g10, 9rl + 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU + sama5d4 0xfc00c000 0xfb00c000 USART3 + sama5d4 0xfc069000 0xfb069000 DBGU + sama5d2 0xf8020000 0xf7020000 UART1 - config AT91_DEBUG_LL_DBGU2 - bool "Kernel low-level debugging on sama5d4" - select DEBUG_AT91_UART - depends on ARCH_AT91 - depends on SOC_SAMA5 + Please adjust DEBUG_UART_PHYS configuration options based on + your needs. config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" @@ -161,10 +162,9 @@ choice mobile SoCs in the Kona family of chips (e.g. bcm28155, bcm11351, etc...) - config DEBUG_BCM63XX + config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" depends on ARCH_BCM_63XX - select DEBUG_UART_BCM63XX config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" @@ -410,6 +410,20 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SX. + config DEBUG_IMX6UL_UART + bool "i.MX6UL Debug UART" + depends on SOC_IMX6UL + help + Say Y here if you want kernel low-level debugging support + on i.MX6UL. + + config DEBUG_IMX7D_UART + bool "i.MX7D Debug UART" + depends on SOC_IMX7D + help + Say Y here if you want kernel low-level debugging support + on i.MX7D. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -433,6 +447,14 @@ choice Say Y here if you want kernel low-level debugging support on KS8695. + config DEBUG_LPC18XX_UART0 + bool "Kernel low-level debugging via LPC18xx/43xx UART0" + depends on ARCH_LPC18XX + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on NXP LPC18xx/43xx UART0. + config DEBUG_MESON_UARTAO bool "Kernel low-level debugging via Meson6 UARTAO" depends on ARCH_MESON @@ -908,13 +930,22 @@ choice on SA-11x0 UART ports. The kernel will check for the first enabled UART in a sequence 3-1-2. - config DEBUG_SOCFPGA_UART + config DEBUG_SOCFPGA_UART0 + depends on ARCH_SOCFPGA + bool "Use SOCFPGA UART0 for low-level debug" + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SOCFPGA(Cyclone 5 and Arria 5) based platforms. + + config DEBUG_SOCFPGA_UART1 depends on ARCH_SOCFPGA - bool "Use SOCFPGA UART for low-level debug" + bool "Use SOCFPGA UART1 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on SOCFPGA based platforms. + on SOCFPGA(Arria 10) based platforms. + config DEBUG_SUN9I_UART0 bool "Kernel low-level debugging messages via sun9i UART0" @@ -1157,6 +1188,18 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. + config DEBUG_ZTE_ZX + bool "Use ZTE ZX UART" + select DEBUG_UART_PL01X + depends on ARCH_ZX + help + Say Y here if you are enabling ZTE ZX296702 SOC and need + debug uart support. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help @@ -1199,10 +1242,6 @@ choice endchoice -config DEBUG_AT91_UART - bool - depends on ARCH_AT91 - config DEBUG_EXYNOS_UART bool @@ -1231,7 +1270,9 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART + DEBUG_IMX6SX_UART || \ + DEBUG_IMX6UL_UART || \ + DEBUG_IMX7D_UART default 1 depends on ARCH_MXC help @@ -1281,7 +1322,9 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART + DEBUG_IMX6SX_UART || \ + DEBUG_IMX6UL_UART || \ + DEBUG_IMX7D_UART default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART @@ -1304,7 +1347,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 - default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX + default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 default "mach/debug-macro.S" @@ -1320,10 +1363,6 @@ config DEBUG_UART_8250 ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC -# Compatibility options for BCM63xx -config DEBUG_UART_BCM63XX - def_bool ARCH_BCM_63XX - config DEBUG_UART_PHYS hex "Physical base address of debug UART" default 0x00100a00 if DEBUG_NETX_UART @@ -1337,6 +1376,7 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 + default 0x09405000 if DEBUG_ZTE_ZX default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1359,6 +1399,7 @@ config DEBUG_UART_PHYS default 0x20201000 if DEBUG_BCM2835 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI @@ -1407,7 +1448,8 @@ config DEBUG_UART_PHYS default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 - default 0xffc02000 if DEBUG_SOCFPGA_UART + default 0xffc02000 if DEBUG_SOCFPGA_UART0 + default 0xffc02100 if DEBUG_SOCFPGA_UART1 default 0xffd82340 if ARCH_IOP13XX default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 @@ -1415,7 +1457,7 @@ config DEBUG_UART_PHYS default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xfffe8600 if DEBUG_UART_BCM63XX + default 0xfffe8600 if DEBUG_BCM63XX_UART default 0xfffff700 if ARCH_IOP33X depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1427,8 +1469,9 @@ config DEBUG_UART_PHYS DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 + DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1466,7 +1509,8 @@ config DEBUG_UART_VIRT default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc40ab00 if DEBUG_BRCMSTB_UART - default 0xfcfe8600 if DEBUG_UART_BCM63XX + default 0xfc705000 if DEBUG_ZTE_ZX + default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 @@ -1485,7 +1529,8 @@ config DEBUG_UART_VIRT default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec02000 if DEBUG_SOCFPGA_UART0 + default 0xfec02100 if DEBUG_SOCFPGA_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 @@ -1516,7 +1561,7 @@ config DEBUG_UART_VIRT DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ - DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \ + DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 config DEBUG_UART_8250_SHIFT @@ -1530,8 +1575,9 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ - ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \ + default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \ + DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \ + DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ @@ -1544,7 +1590,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1561,8 +1607,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARCH_EFM32 || \ - ARCH_SHMOBILE_LEGACY + PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default "mach/uncompress.h" config EARLY_PRINTK @@ -1590,7 +1635,7 @@ config PID_IN_CONTEXTIDR config DEBUG_SET_MODULE_RONX bool "Set loadable kernel module data as NX and text as RO" - depends on MODULES + depends on MODULES && MMU ---help--- This option helps catch unintended modifications to loadable kernel module's text and read-only data. It also prevents execution |