summaryrefslogtreecommitdiffstats
path: root/kernel/arch/arc/Kconfig
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/arch/arc/Kconfig
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/arch/arc/Kconfig')
-rw-r--r--kernel/arch/arc/Kconfig216
1 files changed, 182 insertions, 34 deletions
diff --git a/kernel/arch/arc/Kconfig b/kernel/arch/arc/Kconfig
index df94ac1f7..6312f6079 100644
--- a/kernel/arch/arc/Kconfig
+++ b/kernel/arch/arc/Kconfig
@@ -8,6 +8,7 @@
config ARC
def_bool y
+ select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
select BUILDTIME_EXTABLE_SORT
select COMMON_CLK
select CLONE_BACKWARDS
@@ -22,6 +23,7 @@ config ARC
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
+ select HAVE_FUTEX_CMPXCHG
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_KRETPROBES
@@ -74,6 +76,10 @@ config STACKTRACE_SUPPORT
config HAVE_LATENCYTOP_SUPPORT
def_bool y
+config HAVE_ARCH_TRANSPARENT_HUGEPAGE
+ def_bool y
+ depends on ARC_MMU_V4
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -81,26 +87,47 @@ menu "ARC Architecture Configuration"
menu "ARC Platform/SoC/Board"
-source "arch/arc/plat-arcfpga/Kconfig"
+source "arch/arc/plat-sim/Kconfig"
source "arch/arc/plat-tb10x/Kconfig"
+source "arch/arc/plat-axs10x/Kconfig"
#New platform adds here
endmenu
+choice
+ prompt "ARC Instruction Set"
+ default ISA_ARCOMPACT
+
+config ISA_ARCOMPACT
+ bool "ARCompact ISA"
+ help
+ The original ARC ISA of ARC600/700 cores
+
+config ISA_ARCV2
+ bool "ARC ISA v2"
+ help
+ ISA for the Next Generation ARC-HS cores
+
+endchoice
+
menu "ARC CPU Configuration"
choice
prompt "ARC Core"
- default ARC_CPU_770
+ default ARC_CPU_770 if ISA_ARCOMPACT
+ default ARC_CPU_HS if ISA_ARCV2
+
+if ISA_ARCOMPACT
config ARC_CPU_750D
bool "ARC750D"
+ select ARC_CANT_LLSC
help
Support for ARC750 core
config ARC_CPU_770
bool "ARC770"
- select ARC_CPU_REL_4_10
+ select ARC_HAS_SWAPE
help
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
This core has a bunch of cool new features:
@@ -109,6 +136,27 @@ config ARC_CPU_770
-Caches: New Prog Model, Region Flush
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
+endif #ISA_ARCOMPACT
+
+config ARC_CPU_HS
+ bool "ARC-HS"
+ depends on ISA_ARCV2
+ help
+ Support for ARC HS38x Cores based on ARCv2 ISA
+ The notable features are:
+ - SMP configurations of upto 4 core with coherency
+ - Optional L2 Cache and IO-Coherency
+ - Revised Interrupt Architecture (multiple priorites, reg banks,
+ auto stack switch, auto regfile save/restore)
+ - MMUv4 (PIPT dcache, Huge Pages)
+ - Instructions for
+ * 64bit load/store: LDD, STD
+ * Hardware assisted divide/remainder: DIV, REM
+ * Function prologue/epilogue: ENTER_S, LEAVE_S
+ * IRQ enable/disable: CLRI, SETI
+ * pop count: FFS, FLS
+ * SETcc, BMSKN, XBFU...
+
endchoice
config CPU_BIG_ENDIAN
@@ -117,17 +165,13 @@ config CPU_BIG_ENDIAN
help
Build kernel for Big Endian Mode of ARC CPU
-# If a platform can't work with 0x8000_0000 based dma_addr_t
-config ARC_PLAT_NEEDS_CPU_TO_DMA
- bool
-
config SMP
- bool "Symmetric Multi-Processing (Incomplete)"
+ bool "Symmetric Multi-Processing"
default n
+ select ARC_HAS_COH_CACHES if ISA_ARCV2
+ select ARC_MCIP if ISA_ARCV2
help
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, say N. If you have a system with more
- than one CPU, say Y.
+ This enables support for systems with more than one CPU.
if SMP
@@ -137,13 +181,30 @@ config ARC_HAS_COH_CACHES
config ARC_HAS_REENTRANT_IRQ_LV2
def_bool n
-endif
+config ARC_MCIP
+ bool "ARConnect Multicore IP (MCIP) Support "
+ depends on ISA_ARCV2
+ help
+ This IP block enables SMP in ARC-HS38 cores.
+ It provides for cross-core interrupts, multi-core debug
+ hardware semaphores, shared memory,....
config NR_CPUS
int "Maximum number of CPUs (2-4096)"
range 2 4096
- depends on SMP
- default "2"
+ default "4"
+
+config ARC_SMP_HALT_ON_RESET
+ bool "Enable Halt-on-reset boot mode"
+ default y if ARC_UBOOT_SUPPORT
+ help
+ In SMP configuration cores can be configured as Halt-on-reset
+ or they could all start at same time. For Halt-on-reset, non
+ masters are parked until Master kicks them so they can start of
+ at designated entry point. For other case, all jump to common
+ entry point and spin wait for Master's signal.
+
+endif #SMP
menuconfig ARC_CACHE
bool "Enable Cache Support"
@@ -185,7 +246,7 @@ config ARC_CACHE_PAGES
config ARC_CACHE_VIPT_ALIASING
bool "Support VIPT Aliasing D$"
- depends on ARC_HAS_DCACHE
+ depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
default n
endif #ARC_CACHE
@@ -226,9 +287,12 @@ config ARC_HAS_HW_MPY
Multipler. Otherwise software multipy lib is used
choice
- prompt "ARC700 MMU Version"
+ prompt "MMU Version"
default ARC_MMU_V3 if ARC_CPU_770
default ARC_MMU_V2 if ARC_CPU_750D
+ default ARC_MMU_V4 if ARC_CPU_HS
+
+if ISA_ARCOMPACT
config ARC_MMU_V1
bool "MMU v1"
@@ -249,6 +313,12 @@ config ARC_MMU_V3
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
Shared Address Spaces (SASID)
+endif
+
+config ARC_MMU_V4
+ bool "MMU v4"
+ depends on ISA_ARCV2
+
endchoice
@@ -263,14 +333,16 @@ config ARC_PAGE_SIZE_8K
config ARC_PAGE_SIZE_16K
bool "16KB"
- depends on ARC_MMU_V3
+ depends on ARC_MMU_V3 || ARC_MMU_V4
config ARC_PAGE_SIZE_4K
bool "4KB"
- depends on ARC_MMU_V3
+ depends on ARC_MMU_V3 || ARC_MMU_V4
endchoice
+if ISA_ARCOMPACT
+
config ARC_COMPACT_IRQ_LEVELS
bool "ARCompact IRQ Priorities: High(2)/Low(1)"
default n
@@ -290,7 +362,7 @@ config ARC_IRQ5_LV2
config ARC_IRQ6_LV2
bool
-endif
+endif #ARC_COMPACT_IRQ_LEVELS
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
@@ -303,32 +375,62 @@ config ARC_FPU_SAVE_RESTORE
based on actual usage of FPU by a task. Thus our implemn does
this for all tasks in system.
+endif #ISA_ARCOMPACT
+
config ARC_CANT_LLSC
def_bool n
-menuconfig ARC_CPU_REL_4_10
- bool "Enable support for Rel 4.10 features"
- default n
- help
- -ARC770 (and dependent features) enabled
- -ARC750 also shares some of the new features with 770
-
config ARC_HAS_LLSC
bool "Insn: LLOCK/SCOND (efficient atomic ops)"
default y
- depends on ARC_CPU_770 && !ARC_CANT_LLSC
+ depends on !ARC_CANT_LLSC
+
+config ARC_STAR_9000923308
+ bool "Workaround for llock/scond livelock"
+ default y
+ depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
default y
- depends on ARC_CPU_REL_4_10
-config ARC_HAS_RTSC
- bool "Insn: RTSC (64-bit r/o cycle counter)"
+if ISA_ARCV2
+
+config ARC_HAS_LL64
+ bool "Insn: 64bit LDD/STD"
+ help
+ Enable gcc to generate 64-bit load/store instructions
+ ISA mandates even/odd registers to allow encoding of two
+ dest operands with 2 possible source operands.
+ default y
+
+config ARC_HAS_DIV_REM
+ bool "Insn: div, divu, rem, remu"
default y
- depends on ARC_CPU_REL_4_10
+
+config ARC_HAS_RTC
+ bool "Local 64-bit r/o cycle counter"
+ default n
depends on !SMP
+config ARC_HAS_GRTC
+ bool "SMP synchronized 64-bit cycle counter"
+ default y
+ depends on SMP
+
+config ARC_NUMBER_OF_INTERRUPTS
+ int "Number of interrupts"
+ range 8 240
+ default 32
+ help
+ This defines the number of interrupts on the ARCv2HS core.
+ It affects the size of vector table.
+ The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
+ in hardware, it keep things simple for Linux to assume they are always
+ present.
+
+endif # ISA_ARCV2
+
endmenu # "ARC CPU Configuration"
config LINUX_LINK_BASE
@@ -343,6 +445,29 @@ config LINUX_LINK_BASE
However some customers have peripherals mapped at this addr, so
Linux needs to be scooted a bit.
If you don't know what the above means, leave this setting alone.
+ This needs to match memory start address specified in Device Tree
+
+config HIGHMEM
+ bool "High Memory Support"
+ help
+ With ARC 2G:2G address split, only upper 2G is directly addressable by
+ kernel. Enable this to potentially allow access to rest of 2G and PAE
+ in future
+
+config ARC_HAS_PAE40
+ bool "Support for the 40-bit Physical Address Extension"
+ default n
+ depends on ISA_ARCV2
+ select HIGHMEM
+ help
+ Enable access to physical memory beyond 4G, only supported on
+ ARC cores with 40 bit Physical Addressing support
+
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool ARC_HAS_PAE40
+
+config ARCH_DMA_ADDR_T_64BIT
+ bool
config ARC_CURR_IN_REG
bool "Dedicate Register r25 for current_task pointer"
@@ -354,8 +479,10 @@ config ARC_CURR_IN_REG
config ARC_EMUL_UNALIGNED
bool "Emulate unaligned memory access (userspace only)"
+ default N
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_ARCH_UNALIGN_ALLOW
+ depends on ISA_ARCOMPACT
help
This enables misaligned 16 & 32 bit memory access from user space.
Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
@@ -378,9 +505,10 @@ menuconfig ARC_DBG
bool "ARC debugging"
default y
+if ARC_DBG
+
config ARC_DW2_UNWIND
bool "Enable DWARF specific kernel stack unwind"
- depends on ARC_DBG
default y
select KALLSYMS
help
@@ -394,18 +522,38 @@ config ARC_DW2_UNWIND
config ARC_DBG_TLB_PARANOIA
bool "Paranoia Checks in Low Level TLB Handlers"
- depends on ARC_DBG
default n
config ARC_DBG_TLB_MISS_COUNT
bool "Profile TLB Misses"
default n
select DEBUG_FS
- depends on ARC_DBG
help
Counts number of I and D TLB Misses and exports them via Debugfs
The counters can be cleared via Debugfs as well
+if SMP
+
+config ARC_IPI_DBG
+ bool "Debug Inter Core interrupts"
+ default n
+
+endif
+
+endif
+
+config ARC_UBOOT_SUPPORT
+ bool "Support uboot arg Handling"
+ default n
+ help
+ ARC Linux by default checks for uboot provided args as pointers to
+ external cmdline or DTB. This however breaks in absence of uboot,
+ when booting from Metaware debugger directly, as the registers are
+ not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
+ registers look like uboot args to kernel which then chokes.
+ So only enable the uboot arg checking/processing if users are sure
+ of uboot being in play.
+
config ARC_BUILTIN_DTB_NAME
string "Built in DTB"
help