diff options
| author |   José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-11 10:41:07 +0300 |
|---|---|---|
| committer | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-13 08:17:18 +0300 |
| commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
| tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/w1/slaves | |
| parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) | |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/w1/slaves')
| -rw-r--r-- | kernel/Documentation/w1/slaves/w1_therm | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/kernel/Documentation/w1/slaves/w1_therm b/kernel/Documentation/w1/slaves/w1_therm index cc62a95e4..13411fe52 100644 --- a/kernel/Documentation/w1/slaves/w1_therm +++ b/kernel/Documentation/w1/slaves/w1_therm @@ -11,12 +11,14 @@ Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Description ----------- -w1_therm provides basic temperature conversion for ds18*20 devices. +w1_therm provides basic temperature conversion for ds18*20 devices, and the +ds28ea00 device. supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 W1_THERM_DS1825 0x3B +W1_THERM_DS28EA00 0x42 Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two @@ -48,3 +50,10 @@ resistor). The DS18b20 temperature sensor specification lists a maximum current draw of 1.5mA and that a 5k pullup resistor is not sufficient. The strong pullup is designed to provide the additional current required. + +The DS28EA00 provides an additional two pins for implementing a sequence +detection algorithm. This feature allows you to determine the physical +location of the chip in the 1-wire bus without needing pre-existing +knowledge of the bus ordering. Support is provided through the sysfs +w1_seq file. The file will contain a single line with an integer value +representing the device index in the bus starting at 0. |